jsl Posted July 28, 2008 Share Posted July 28, 2008 Where can I get the driver to make my GMA965 X3100 work properly?Thanks in advance! Please refer to these links of jsl : http://forum.insanelymac.com/index.php?sho...69826&st=40 http://forum.insanelymac.com/index.php?sho...9826&st=140 Link to comment Share on other sites More sharing options...
ariethekid Posted August 29, 2008 Share Posted August 29, 2008 Ok well I have the x3100 graphics card working with QE/CI on my Fujitsu T4220 SXGA+ tablet. One little issue I have noticed is that OSX crashes without fail when I try to switch to the native resolution. ( 1400x1050 ) I have to use SwitchResX to create the 1400x1024 resolution and it works great except for the missing 26 pixel rows at the bottom of the screen. Is this a driver limitation? I don't have any other monitors to test anything higher than 1440x900 on an external screen. PAULICAT!!!! if you're out there I need some help or maybe some advice. I tried using the EFI strings and I was able to get it to select the 1400x1050 without crashing however The screen was stretched out and distorted when I did that. But I was able to get my current setup with EFI strings. If anyone has a working EFI string with Res Change with supports resolutions higher than 1280x1024 that would be awesome. Just give me the HEX and I'll add in my EDID into it. Thanks guys. Good luck all. Oh one more thing. Has anyone gotten their x3100 to work with the newer 3100FB.kext, version 1.5.24? If seen alot of success wit 1.5.18 but I was hoping that maybe the newer version will fix my resolution issue. And also has anyone gotten regular res change with stretching working? Couldn't figure that one out either. Link to comment Share on other sites More sharing options...
metalmaniac Posted August 29, 2008 Share Posted August 29, 2008 Hey, Toshiba m200 here, using NvidiaEFI.kext, and LaptopDisplay.kext. Used mt EDID - EDID BYTES: 0x 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F ------------------------------------------------ 00 | 00 FF FF FF FF FF FF 00 51 F3 86 50 00 00 00 00 10 | 00 00 01 03 80 18 12 00 CA 00 00 00 00 00 00 00 20 | 00 00 00 00 00 00 90 40 01 01 01 01 01 01 01 01 30 | 01 01 01 01 01 01 30 2A 78 20 51 1A 10 40 30 70 40 | 13 00 F5 B8 00 00 00 18 00 00 00 FC 00 54 4F 53 50 | 48 49 42 41 20 49 6E 74 65 0A 00 00 00 FC 00 72 60 | 6E 61 6C 20 50 61 6E 65 6C 20 20 0A 00 00 00 FC 70 | 00 0A 00 00 00 00 00 00 00 00 00 00 00 00 00 A8 This is for a Nvidia Geforce go fx5200. 32 mb. Used DisplayUtility to make the DisplayVendorID folder, and it moved it to Displays/Overrides/ Still no QE Can anyone help me. Its only 32mb, but this is my output from sys profiler NVIDIA GeForce FX Go5200 32M/64M: Chipset Model: NVIDIA GeForce FX Go5200 32M/64M Type: Display Bus: AGP VRAM (Total): 256 MB Vendor: NVIDIA (0x10de) Device ID: 0x0328 Revision ID: 0x00a1 Displays: Display: Resolution: 1280 x 1024 Depth: 32-bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported Display Connector: Cheers Ash Link to comment Share on other sites More sharing options...
CANADAS ARMY Posted September 6, 2008 Share Posted September 6, 2008 Sooooo. wait. where do i put these patches? My HP laptop with a intel video card (NEVER AGAIN!) shows a blue screen after the loading screen, and i have to plug in a external monitor in order for it to work. what do i do, and how? please!! Link to comment Share on other sites More sharing options...
Blue1980 Posted September 7, 2008 Share Posted September 7, 2008 Why do I get the feeling that this so called driver and relating thread is run by someone who's full of hot air and getting people excited over nothing? If it was a woman in a bar i'd call her a tease! Link to comment Share on other sites More sharing options...
JSR Posted September 23, 2008 Share Posted September 23, 2008 tested on a Sony Vaio VGN-FS285H, but doesn't work I still get a white screen. Link to comment Share on other sites More sharing options...
Slice Posted September 24, 2008 Share Posted September 24, 2008 Hi, people! The LaptopDisplay may work only with full set of video drivers! It is an addition but not a replacement of anyone. Link to comment Share on other sites More sharing options...
blackmonster Posted September 25, 2008 Share Posted September 25, 2008 Hi all. I have a Sony Vaio Fz140N and my Graphics card is X3100 but I can't install it. I try many thing but still have mess white screen. I attached dump file and hope you can help me. Thanks a lot. Sorry for my poor English. dump_x3100_fz140N_vaio.txt Link to comment Share on other sites More sharing options...
Slice Posted October 23, 2008 Share Posted October 23, 2008 I check LaptopDisplay in different configurations and also tried to correct it. It never works! Link to comment Share on other sites More sharing options...
r0987 Posted November 1, 2008 Share Posted November 1, 2008 Wow...what's wrong with Natit? Link to comment Share on other sites More sharing options...
Volcacius Posted November 5, 2008 Share Posted November 5, 2008 Everyone here with monitor problems should try DSDT patch.http://forum.insanelymac.com/index.php?showtopic=133683 Link to comment Share on other sites More sharing options...
Anonymous_ Posted November 9, 2008 Share Posted November 9, 2008 Hi, where i can download it please? I want to try it on my IBM T40 and Dell D600 Thanks. Link to comment Share on other sites More sharing options...
bretle Posted November 16, 2008 Share Posted November 16, 2008 Any link where to download this kext ????? Thx Link to comment Share on other sites More sharing options...
jvidor Posted December 5, 2008 Share Posted December 5, 2008 Great. I´ll try on my VGN C240E. Link to comment Share on other sites More sharing options...
iceboybatman Posted December 23, 2008 Share Posted December 23, 2008 Oh,thank you.I hope it should work in my pc. Link to comment Share on other sites More sharing options...
OCM770 Posted January 1, 2009 Share Posted January 1, 2009 Download link please? Original download link is down Link to comment Share on other sites More sharing options...
Slice Posted January 13, 2009 Share Posted January 13, 2009 No sense in download link. The driver never works. Moderators! Close the thread! Link to comment Share on other sites More sharing options...
pat-pat Posted February 26, 2009 Share Posted February 26, 2009 Even if the kext doesn't work I think we should keep a copy available, This particular kext was offered including source code that could be a good source of information for fixing it or making a different one. I'd appreciate if someone can re-send it. thanks patpat Link to comment Share on other sites More sharing options...
tarastalian Posted April 4, 2009 Share Posted April 4, 2009 Toshiba Satellite a200-1gb, with ATI mobility HD2600. Succesfully install ATIRadeonX2000.Kext, work perfect in external monitor, but i hace black screen in laptop. This is my EDID: 00FFFFFFFFFFFF00 320C00DC00000000 0010010380211578 0AB3409959538D27 2550540000000101 0101010101010101 010101010101BC1B 00A0502017303020 36004BCF10000019 0000000000000000 0000000000000000 0000000000FE004C 475068696C697073 4C43440A000000FE 004C503135345758 342D544C44320043 i've tried the DisplayUtility but it didn't work. Link to comment Share on other sites More sharing options...
hotmexican1983 Posted September 8, 2009 Share Posted September 8, 2009 ok here is for test LaptopDisplay.kext it "should" work on any laptop nevermind what video card is if work you should see class "LaptopPanelA" attached to "IOPanelDevice" in root device tree ( under IOACPIPlatformExpert ) also there should be IOBackLightDisplay class set for current display not "IODisplay" ! please test and report and do provide ioregs thanks compiled kext: source code: ps: ( read my notes in LaptopPanel.cpp for future hacking ) hi well now this is probably a question you have already got but i have been haveing problems enabeling me laptop display i have a vaio and it has an 8400 gt m and i got 10 .5 .7 on it its on untill i use nvinject than it just boots normal and banishes tight befor loging in and than it just goes black the lap can be used exept no pic and than i go and plug an external monitor to it and i have picture what can i do i hope you can give me some gidence. have a great day. Link to comment Share on other sites More sharing options...
hotmexican1983 Posted September 8, 2009 Share Posted September 8, 2009 well i cant find the kext anywhere they qre not attached anywhere and i dont really see em anywhere else if you or anyone know please let me know. hi got it thanks that was dumn Link to comment Share on other sites More sharing options...
paddyoquinn Posted September 8, 2009 Share Posted September 8, 2009 hi i am wondering exactally how this works, does it use frame buffer to recognize the right resolution or some sort of generic driver maybe? i wish to know because i am working on a driver for the ati mobility 1300 and was wonder if there was anything here that could help? Regards Link to comment Share on other sites More sharing options...
hotmexican1983 Posted September 9, 2009 Share Posted September 9, 2009 na man it aint there sorry but its no where to be found Link to comment Share on other sites More sharing options...
alexneko Posted December 28, 2009 Share Posted December 28, 2009 where to get it? Link to comment Share on other sites More sharing options...
Desert Warriors Posted March 21, 2010 Share Posted March 21, 2010 where to get it? Hello everybody For those who are still looking for this kext, here it is. It is intended for use with leopard (I am currently running 10.5.8). Good Luck LaptopDisplay.kext.zip Link to comment Share on other sites More sharing options...
Recommended Posts