Jump to content

Asus P5W DH Deluxe thread for 10.5.x Leo - 10.9.x Mavericks

G5rocks

By G5rocks,
in OSx86 10.5 (Leopard)

 Share
1,494 posts in this topic

Recommended Posts

marliwahoo
marliwahoo
Posted
Posted

Started from scratch.

 

Changed bios to 2504. Did my own dsdt patching with fixes from 314Ter's dsdt. Changed back to bios 2904 using the patched dsdt. Sleep, shutdown and restart work all with bios 2901 !!

 

I don't know if speedstep works. I need to know where to get the application cpu-i so I can check.

 

The only kexts used:

fakesmc

IOAHCIBlockStorageInjector

JMicronATA

OpenHaltRestart

PlatformUUID

VoodooHDA

 

 

Here is my "fixed" dsdt.aml for my P5W. See my sig for my machines specs.

dsdt.aml.zip

Link to comment
Share on other sites
hockeyman96
hockeyman96
Posted
Posted
Finally i make working patches to DSDT... Tested on 10.5.8... No more need to delete AppleHPET or using disabler to get working all USB ports or FW. All USB ports work always in High Speed, also FireWire working, sleep, shutdown, restart working, waking from USB keyboard/mouse working, TM Fix implemented, Vanilla SpeedSteep working on 65nm CPUs.

 

Source and compiled DSDT.aml files can get here:

http://forum.osx86.org.pl/topics27/fixy-ds...susow-vt857.htm

or complete pack here:

http://rapidshare.com/files/283233093/P5W_...e_DSDT_2504.zip

DSDT compiled on BIOS base version 2504, because later version don't have SSDT Tables, and cannot get working Vanilla SpeedSteep.

 

Enjoy...

 

I have a P5W that I have been using with Kalyway's 10.5.2. I recently upgraded to 10.5.7 and everything works except for shutdown and firewire. When I shutdown, the fans are still spinning and my mobo is still powered. I have to hold the power button to turn it off.

 

I downloaded these files but how do I use them? Will they help solve my shutdown/firewire problems?

Link to comment
Share on other sites
ezdy9385
ezdy9385
Posted
Posted

hye firstly here is my rig

 

 

 

P5WDH (bios 2901)

Intel Processor x6800 @ 2.93ghz

gfx 7950 gx2

2gb ddr2 ram

 

i'm beginner in installing mac os x hackintosh

firstly i have tried the OSXinstaller seems there is a lot of incompatible kext.

now i'm trying to install the mac os x 10.6 retail i believe there is many guide the one i have try so far is using pkg method, however it does have permission problem.

 

my question is

1) what is the best method to install the mac os x 10.6 on my hackintosh?

2) what extra kext should i use?

3)is there any simple guide walkthrough to install the mac os x 10.6?

4)for my gfx i have tried to used efi strings but it failed..and i have tried using nvinject and editing nvdia.kext...still dont have QE and CI enable shown.

 

hope u guys help me out..i really interested to experience mac os x on my pc.

Link to comment
Share on other sites
hockeyman96
hockeyman96
Posted
Posted

After upgrading to 10.5.7, I was able to get everything working. Shutdown, audio, lan, etc. My only problem now is that it takes a long time to start up and hangs on a blue screen for a few minutes before the desktop shows. Is there a fix for this?

 

 

 

 

Mobo - Asus P5W

Intel E6700 - 2.67ghz

3GB Ram

HDD - 500GB SATA

DVD-RW - SATA

Nvidia Geforce6200LE

Link to comment
Share on other sites
morfy
morfy
Posted
Posted
but this mobo supports 45nm CPUs?

 

yes :) Avevo montato il 5200 che è a 45nm. Purtroppo hanno molte limitazioni ma funzionare funzionano (tipo non è possibile scende oltre un certo valore di vcore e quindi conviene lasciarlo in automatico).

Link to comment
Share on other sites
  • 2 weeks later...
Zerojojo
Zerojojo
Posted
Posted

Hi Everyone,

10.6.2. worked great for me, but I have another problem concerning my USB ports (not just since 10.6.2). They all do work, but there seems to be something wrong with the power supply or data handling. I was trying to use a Creative Xmod, but it made popping noises during playback, especially so when CPU load was up. The Xmod works fine on Windows Vista (same machine) and my iBook, so it must be OS X's handling of my USB ports. Also I notice some slight jumps of my mouse cursor every now and then which isn't too annoying, but shows there's something wrong. I tried pretty much everything, deleted AppleHPET, played around with the BIOS settings, reinstalled OS X, tried various kexts. Nothing worked so far. What's also quite weird is that the popping noise of my Xmod is worse when I plug it in the back of my machine instead of the USB hub of my monitor.

Has anyone had the same problem or can point me into some direction? I'd really appreciate your input.

 

Regards

Johannes

Link to comment
Share on other sites
Derty
Derty
Posted
Posted

my mkext to 10.6.2, install combo update better and change mkext before restarting.

 

bios 2901 original asus

 

chamaleon 2 rc3 + efi 10.5

 

i be used normal dsdt auto fix..

auto dsdt: http://www.insanelymac.com/forum/index.php...st&id=57331

 

fix usb form com.apple.boot.plist

 

<key>USBBusFix</key>

<string>Yes</string>

 

EDIT: corrected 2-DEC-09

Extensions.mkext.zip

AppleHDA.kext.zip

Link to comment
Share on other sites
cédric
cédric
Posted
Posted

hi!

i've installed osx by ideneb 10.5.7 on my p5wdh deluxe with geforce 8800gt.

All works great during the installation and after.

The system works great with internet, graphics 1920*1080p full hd the only problem is that few minutes (15 minutes) after booting my osx, the screen and also the system locks and there's no other solution that reset the computer.

i've try to disabled the screen saver and more but i don't know where this probleme come from.

can you help please?

thx a lot and sorry for my very bad english.

Link to comment
Share on other sites
  • 2 weeks later...
314TeR
314TeR
Posted
Posted

Hi guys!

 

In this link:

http://forum.osx86.org.pl/topics4/mac-os-x...tosh-vt1132.htm

You will find new versions of the DSDT for the P5W with source code, based on 3001 bios I think I managed to correct all the problems that I found in DSDT. DSDT are prepared in two different versions, one for the Core and the other for the Quad.

 

Confirmed the correct operation of Mac OS X 10.6.2 and 10.5.8:

* Sleep / reboot / shutdown - works correctly.

* All USB ports are working correctly.

* FireWire is working properly.

* Your computer can wake up from sleep state via a USB keyboard or mouse.

* SpeedSteep working with CST states - is CPU independent, only need to place correct version (Core/Quad) - power management works exactly like a Mac, and the temperatures of the CPU reached in Mac OS X are identical to those of Windows.

* No errors or other disturbing messages on startup.

* Correct Time Machine, and Bonjour, for both LAN cards

 

I think it is safe to update your system by SU.

 

I prepared also:

The complete installation package for the P5W DH Deluxe for the Snow Leopard, which contains PC_EFI 10.5, kexts, smbios.plist, etc.:

http://rapidshare.com/files/312905109/P5W_...Beta_1.0.2_.zip

Boot-132 for Snow Leopard

http://rapidshare.com/files/312905852/Boot..._Beta_1.0.2.zip

The BootCD contains installer package.

 

Unfortunately, the installation package does not include the audio kext. Still working on them. If someone can give me a link to a working AppleHDA for ALC882 or better LegacyAppleHDA, I would be very grateful.

 

This installer and the BootCD, is the first version that I decided to make public and may contain errors. I hope that with your help, work on them will end soon.

 

The new version, news, etc., will publish in this thread:

http://forum.osx86.org.pl/topics4/mac-os-x...tosh-vt1132.htm

In this thread you will find also pictures showing how to properly set the BIOS.

 

Enjoy

314TeR

 

Edit:

New versions here:

http://www.insanelymac.com/forum/index.php...t&p=1360946

BootCD_Snow_Beta_1.0.2.zip

P5W_DH_Deluxe_haMac_pack_by_314TeR_v1.9.zip

Link to comment
Share on other sites
986
986
Posted
Posted
Hi guys!

 

In this link:

http://forum.osx86.org.pl/topics4/mac-os-x...tosh-vt1132.htm

You will find new versions of the DSDT for the P5W with source code, based on 3001 bios I think I managed to correct all the problems that I found in DSDT. DSDT are prepared in two different versions, one for the Core and the other for the Quad.

 

Confirmed the correct operation of Mac OS X 10.6.2 and 10.5.8:

* Sleep / reboot / shutdown - works correctly.

* All USB ports are working correctly.

* FireWire is working properly.

* Your computer can wake up from sleep state via a USB keyboard or mouse.

* SpeedSteep working with CST states - is CPU independent, only need to place correct version (Core/Quad) - power management works exactly like a Mac, and the temperatures of the CPU reached in Mac OS X are identical to those of Windows.

* No errors or other disturbing messages on startup.

* Correct Time Machine, and Bonjour, for both LAN cards

 

I think it is safe to update your system by SU.

 

I prepared also:

The complete installation package for the P5W DH Deluxe for the Snow Leopard, which contains PC_EFI 10.5, kexts, smbios.plist, etc.:

http://rapidshare.com/files/312905109/P5W_...Beta_1.0.2_.zip

Boot-132 for Snow Leopard

http://rapidshare.com/files/312905852/Boot..._Beta_1.0.2.zip

The BootCD contains installer package.

 

Unfortunately, the installation package does not include the audio kext. Still working on them. If someone can give me a link to a working AppleHDA for ALC882 or better LegacyAppleHDA, I would be very grateful.

 

This installer and the BootCD, is the first version that I decided to make public and may contain errors. I hope that with your help, work on them will end soon.

 

The new version, news, etc., will publish in this thread:

http://forum.osx86.org.pl/topics4/mac-os-x...tosh-vt1132.htm

In this thread you will find also pictures showing how to properly set the BIOS.

 

Enjoy

314TeR

 

 

thank you man, i will try later,

so do you recommend using the new 3001 bios? because i am back on 2504....

Link to comment
Share on other sites
314TeR
314TeR
Posted
Posted
thank you man, i will try later,

so do you recommend using the new 3001 bios? because i am back on 2504....

 

Yes, even this is a mandatory ... Only in the 3001 BIOS I was able to successfully run SpeedSteep with CST states.

3001 BIOS + above DSDT and everything works as it should.

Link to comment
Share on other sites
Zerojojo
Zerojojo
Posted
Posted

Hi,

can anyone upload the DSDT file someplace else? Rapidshare says I need a premium account in order to access the file. And what exactly does the installer do? I have Chameleon RC3, a DSDT file created by MacLoader SL_0.4 and various kexts. Is there any improvement to be expected over this setup?

Thanks a lot!

 

Regards

Johannes

Link to comment
Share on other sites
Ritz Carltn
Ritz Carltn
Posted
Posted

Good Job!

I think you almost reached Real Mac System except ALC882 and Graphic Card.

In case of Graphic Card, yea, it's depend on user's environment.

How about insert ALC882 for next step?

 

As you know, 10.6.2, it is some different AHCI, as I know.

I still have some weird symptom of dsdt in 10.6.2.

But, I'm not sure.

 

And I'd like to recommend you upgrading iasl by latest version as followings.

 

http://www.insanelymac.com/forum/lofiversi...hp/t189272.html

 

Hi guys!

 

In this link:

http://forum.osx86.org.pl/topics4/mac-os-x...tosh-vt1132.htm

You will find new versions of the DSDT for the P5W with source code, based on 3001 bios I think I managed to correct all the problems that I found in DSDT. DSDT are prepared in two different versions, one for the Core and the other for the Quad.

 

Confirmed the correct operation of Mac OS X 10.6.2 and 10.5.8:

* Sleep / reboot / shutdown - works correctly.

* All USB ports are working correctly.

* FireWire is working properly.

* Your computer can wake up from sleep state via a USB keyboard or mouse.

* SpeedSteep working with CST states - is CPU independent, only need to place correct version (Core/Quad) - power management works exactly like a Mac, and the temperatures of the CPU reached in Mac OS X are identical to those of Windows.

* No errors or other disturbing messages on startup.

* Correct Time Machine, and Bonjour, for both LAN cards

 

I think it is safe to update your system by SU.

 

I prepared also:

The complete installation package for the P5W DH Deluxe for the Snow Leopard, which contains PC_EFI 10.5, kexts, smbios.plist, etc.:

http://rapidshare.com/files/312905109/P5W_...Beta_1.0.2_.zip

Boot-132 for Snow Leopard

http://rapidshare.com/files/312905852/Boot..._Beta_1.0.2.zip

The BootCD contains installer package.

 

Unfortunately, the installation package does not include the audio kext. Still working on them. If someone can give me a link to a working AppleHDA for ALC882 or better LegacyAppleHDA, I would be very grateful.

 

This installer and the BootCD, is the first version that I decided to make public and may contain errors. I hope that with your help, work on them will end soon.

 

The new version, news, etc., will publish in this thread:

http://forum.osx86.org.pl/topics4/mac-os-x...tosh-vt1132.htm

In this thread you will find also pictures showing how to properly set the BIOS.

 

Enjoy

314TeR

Link to comment
Share on other sites
314TeR
314TeR
Posted
Posted

@Zerojojo,

 

In the post above, I attached two zip archives, first with DSDT and with all the necessary content of /Extra, and the second with BootCD and installer.

The installer loaded in the indicated partition only PC_EFI and content of /Extra. No any part of the system is modified.

 

What is the advantage of this solution? Just want to create an elegant and complete solution tailored exclusively for the ASUS P5W DH Deluxe.

Link to comment
Share on other sites
986
986
Posted
Posted
Yes, even this is a mandatory ... Only in the 3001 BIOS I was able to successfully run SpeedSteep with CST states.

3001 BIOS + above DSDT and everything works as it should.

 

 

you are the man!!

I really feel an improovement

 

sleep restart sleep shutdown works *in that exact order

 

BIG thanks to YOU

Link to comment
Share on other sites
314TeR
314TeR
Posted
Posted
Good Job!

I think you almost reached Real Mac System except ALC882 and Graphic Card.

In case of Graphic Card, yea, it's depend on user's environment.

How about insert ALC882 for next step?

 

As you know, 10.6.2, it is some different AHCI, as I know.

I still have some weird symptom of dsdt in 10.6.2.

But, I'm not sure.

 

And I'd like to recommend you upgrading iasl by latest version as followings.

 

http://www.insanelymac.com/forum/lofiversi...hp/t189272.html

 

Thanks,

 

Looking for a well-working, a modified AppleHDA and perfectly LegacyAppleHDA ... I do not want to start working on modifying the AppleHDA from scratch, so if any of you use and everything is working properly, it would be for me a good starting point.

 

Can you describe precisely what is going on with AHCI in 10.6.2?

 

I used to compile the October iasl.

Link to comment
Share on other sites
Ritz Carltn
Ritz Carltn
Posted
Posted

314TeR,

I added GFX-String of nVidia 8600 GTS 256MB in DSDT.aml as followings.

 

http://ul.to/do6c3s

 

It works in 10.5.8 with 8600 GTS 256 MB. But, it's not working in 10.6.2.

Yea, I already used "GraphicsEnabler=Yes" with chameleon v2-rc3 and PC_EFIv5 in 10.5.8 and 10.6.2 for checking, no success.

I duuno why.

 

Thanks,

 

Looking for a well-working, a modified AppleHDA and perfectly LegacyAppleHDA ... I do not want to start working on modifying the AppleHDA from scratch, so if any of you use and everything is working properly, it would be for me a good starting point.

 

Can you describe precisely what is going on with AHCI in 10.6.2?

 

I used to compile the October iasl.

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...