tonyjaa Posted April 16, 2008 Share Posted April 16, 2008 I Downloaded Leo4All-10.5.2 Universal AMD/INTEL[sSE2/SSE3] From TPB & Burned it with Roxio For Mac (on iMac)... with 1x.... Once It Finished I Took The DVD out and put it in my mac... booted it.... it took abt 5 min to load (not the vanilla screen...) Then I went into Disk Utility to install formated as Mac OS X (Journaled) ... and Partitioned THE FULL HD with (GUID)... Then went into customize and selected what was needed.... clicked done.. clicked install then install THEN GET A INSTALL FAILED ERROR! what did i do wrong? (Pic Below...) Link to comment Share on other sites More sharing options...
eddie11c Posted April 16, 2008 Share Posted April 16, 2008 bad burn, its unable to read one of the packages most likely. Link to comment Share on other sites More sharing options...
tonyjaa Posted April 16, 2008 Author Share Posted April 16, 2008 ive burnt it 3 times with 3 different disks... ridata dvd-r maxell dvd-r sony dvd-r HELP Link to comment Share on other sites More sharing options...
zorro07 Posted April 16, 2008 Share Posted April 16, 2008 Burn it on slowest possible speed. Do you have access to a windows machine? burn it from that - slowly! Link to comment Share on other sites More sharing options...
tonyjaa Posted April 16, 2008 Author Share Posted April 16, 2008 Ok, but ill give that a shot.... But Whats the difference? Link to comment Share on other sites More sharing options...
the iDoctor Posted April 16, 2008 Share Posted April 16, 2008 it just gives the burner enough time to get everything on there.... i never burn anything at full speed, especially if im doing stuff on my computer Link to comment Share on other sites More sharing options...
tonyjaa Posted April 16, 2008 Author Share Posted April 16, 2008 i burned at 1x speed on my imac....=/ Link to comment Share on other sites More sharing options...
tonyjaa Posted April 22, 2008 Author Share Posted April 22, 2008 ITS NOT WORKING BOTH THE KALAWAY & THE LEO4ALL PLEASE HELP ME! Link to comment Share on other sites More sharing options...
Boot Camp Posted April 22, 2008 Share Posted April 22, 2008 I Downloaded Leo4All-10.5.2 Universal AMD/INTEL[sSE2/SSE3] From TPB & Burned it with Roxio For Mac (on iMac)... with 1x.... Once It Finished I Took The DVD out and put it in my mac... booted it.... it took abt 5 min to load (not the vanilla screen...) Then I went into Disk Utility to install formated as Mac OS X (Journaled) ... and Partitioned THE FULL HD with (GUID)... Then went into customize and selected what was needed.... clicked done.. clicked install then install THEN GET A INSTALL FAILED ERROR! what did i do wrong? (Pic Below...) You put it in your iMac? Link to comment Share on other sites More sharing options...
tonyjaa Posted April 23, 2008 Author Share Posted April 23, 2008 No ugh... i got a tecra S3 Now... well its not working i tried both leo4ALl & the kalaway but so luck.& i cant even install XP any more... hard drive wont mount i format with fat. nothing works.. =/HELP PLEASEwait......... ITHINK ITS INSTALLING OMG!!!wait......... ITHINK ITS INSTALLING OMG!!!IT IS WORKING I THINK ITS INTSALLING ON THE VOLUME "Macintosh" Link to comment Share on other sites More sharing options...
Boot Camp Posted April 23, 2008 Share Posted April 23, 2008 No ugh... i got a tecra S3 Now... well its not working i tried both leo4ALl & the kalaway but so luck.& i cant even install XP any more... hard drive wont mount i format with fat. nothing works.. =/HELP PLEASEwait......... ITHINK ITS INSTALLING OMG!!!wait......... ITHINK ITS INSTALLING OMG!!!IT IS WORKING I THINK ITS INTSALLING ON THE VOLUME "Macintosh"It worked after you named it "Macintosh", huh? You must have gave your volume a two worded name or one with a space before. Remember to only use one word when naming your volume. Congratulations on your install. Link to comment Share on other sites More sharing options...
tonyjaa Posted April 23, 2008 Author Share Posted April 23, 2008 Well i thought it was installing, but sadly it lagged at the 2 minute mark for well over 1 hour so i turned it off.. And i booted it with the DVD and it booted OSX86, but without the DVD it doesn't boot anything! Please help I need this done withing 3 days because im moving... Gone to school let me know what I should do..... I used this before to install the OSX86 on the whole partition, but i wont both Vista & Macosx86 HELP? fdisk -e /dev/rdisk0 (when the partition you want to install leo on is your first hard disk) then type print and then you see a list of all partitions and the partition with an * is the one who is set as active so if leo should be on the 2nd partition you must type: flag 2 and then type: write then hit enter type quit hit enter type exit WHAT SHOULD I DOO? HEELPP Link to comment Share on other sites More sharing options...
Boot Camp Posted April 23, 2008 Share Posted April 23, 2008 Well i thought it was installing, but sadly it lagged at the 2 minute mark for well over 1 hour so i turned it off.. And i booted it with the DVD and it booted OSX86, but without the DVD it doesn't boot anything! Please help I need this done withing 3 days because im moving... Gone to school let me know what I should do..... I used this before to install the OSX86 on the whole partition, but i wont both Vista & Macosx86 HELP? fdisk -e /dev/rdisk0 (when the partition you want to install leo on is your first hard disk) then type print and then you see a list of all partitions and the partition with an * is the one who is set as active so if leo should be on the 2nd partition you must type: flag 2 and then type: write then hit enter type quit hit enter type exit WHAT SHOULD I DOO? HEELPP You either installed GUID and then used MBR EFI OR it is a bad burn. Have you tried a different DVD burner? Link to comment Share on other sites More sharing options...
tonyjaa Posted April 23, 2008 Author Share Posted April 23, 2008 GUID? How Should I Do It? Link to comment Share on other sites More sharing options...
tonyjaa Posted April 24, 2008 Author Share Posted April 24, 2008 so confused. I used the tiger before. buh iunno just stuck and hopeless.. what should i do? should i d/w another version of the osx86? I WILL DONATE. I own the original from the apple store so i have a license But really stuck. This is what im doing: I tried to use Kalayway it didnt even boot to the install (continue) it lagged on a text @ some point... I am using Leo4All 10.5.2 well it runs. I use disk utitly and Format ALL as Macintosh Journaled.... Then I partition it into 2 parts... both GUID & mounted... I close it and install by selecting the first one... Well it installs then lags on the finishing in approx 2 min... i shut it down it boots only from CD Now IM STUCK..I Cant even install Vista... It Cant Find ANY DRIVES! WHAT DO I DOO? I Tried Formating in MS DOS to install Vista to at least do my school homework but no use... HELP ME PLEASE I AM DISPIRIT Link to comment Share on other sites More sharing options...
Boot Camp Posted April 24, 2008 Share Posted April 24, 2008 When you format your hard drive (in the disk utility) all you do is go to partition, make two partitions, the one you are installing Leopard on format it to Mac OS Extended(journaled), but before you format, click on the options menu and select GUID partition map. Now it is formated as a GUID and you install with the GUID EFI when you install. It should boot without the dvd. Link to comment Share on other sites More sharing options...
tonyjaa Posted April 24, 2008 Author Share Posted April 24, 2008 Ok im going to try that.... But How about the 2nd partition? it will be journaled as well? I ant both vista and leopard and even when i put my vista install disk it doesnt reconginze any DRIVES.... so ill try the 2 partions.. and jut format as GUID? and something about EFI ill find that &by the way thanks so much for you contiuning help... & im using Leo 4 Alll Should i try with a usb external drive for kalyaway? Link to comment Share on other sites More sharing options...
Boot Camp Posted April 25, 2008 Share Posted April 25, 2008 If you want to dual boot you have to install windows first, it gets a lot trickier with vista, but you can follow this guide: http://forum.insanelymac.com/index.php?showtopic=39253 And I think the reason vista can see your hard drive is because you have it under a Mac OS format, format it as Fat32 (with the leopard disk utility) or better yet use the "Paragon Partition Manager Professional" and format the drive as NTFS. Vista will then be able to see the hard drive and you can install. Link to comment Share on other sites More sharing options...
tonyjaa Posted April 25, 2008 Author Share Posted April 25, 2008 Well... I just gave it another shot... didnt work =/ I Downloaded Leo4All v3... Hopeeinng it would workk but i got this errorr Help Me PLEASE =( I dunt know what to do anymore... I tried booting with -x, -v, -s , --s, and alll! =/ just keeps on showing that msg. it s sayys some error about disks and restarts and restarts & i did the HFS+ thing... nothing. =( Link to comment Share on other sites More sharing options...
tonyjaa Posted April 27, 2008 Author Share Posted April 27, 2008 HOW DO I FORMAT MY HARD DRVIE INTO NTFS WITHOUT VISTA BECAUSE IT WONT RECONZIGE MY DRIVE IS THERE A BOOT CD???? Link to comment Share on other sites More sharing options...
Boot Camp Posted April 28, 2008 Share Posted April 28, 2008 First boot into Kalyway or Leo4All and format the drive as Fat32. Then if you have an XP disk lying around, boot into that and format the drive as NTFS. Then you will be able to install Vista. Link to comment Share on other sites More sharing options...
Recommended Posts