DMJC Posted April 15, 2008 Share Posted April 15, 2008 Hi, I have an Asus F9 laptop. It sees my card as an ALC660-VD. There is a special option which linux requires where before loading the driver you add options=snd-hda-intel model=lenovo. I am going to put in this thread 1. my codec dump and 2. a copy of the patch that enables the lenovo changes to the driver. I hope someone can help me to find a permanent working solution to this chip on osx. I have been able to locate some patched apple intel HDA drivers for the ALC660 which do detect my audio I/O but do not produce working output. I think this is the best place to start as other drivers don't even detect the volume controls. Link to comment Share on other sites More sharing options...
DMJC Posted April 15, 2008 Author Share Posted April 15, 2008 ok here is the driver that detected my audio please note though that no sound actually came out the speakers/headphones and the microphone didn't do anything either. As well as a Codec dump for the card: Codec: Realtek ALC660-VD Address: 0 Vendor Id: 0x10ec0660 Subsystem Id: 0x10431339 Revision Id: 0x100001 No Modem Function Group found Default PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=2, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0 Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40] Converter: stream=0, channel=0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=0, channel=0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x04 [Audio Output] wcaps 0x1d: Stereo Amp-Out Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=0, channel=0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x05 [Audio Output] wcaps 0x1d: Stereo Amp-Out Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=0, channel=0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0x1e]: 16 20 24 32 formats [0x1]: PCM Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x09, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x1f 0x1f] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0x6]: 16 20 formats [0x1]: PCM Connection: 1 0x22 Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x9f 0x9f] [0x9f 0x9f] [0x80 0x80] [0x80 0x80] [0x1f 0x1f] [0x80 0x80] Connection: 6 0x18 0x19 0x1a 0x1b 0x1c 0x1d Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] Connection: 2 0x03 0x0b Node 0x0e [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] Connection: 2 0x04 0x0b Node 0x0f [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] Connection: 2 0x05 0x0b Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x081003c: IN OUT HP EAPD Detect EAPD 0x2: EAPD Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI Conn = ATAPI, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x0c Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0810034: IN OUT EAPD Detect EAPD 0x2: EAPD Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Connection: 1 0x0d Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0834: IN OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Connection: 1 0x0e Node 0x17 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0834: IN OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Connection: 1 0x0f Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x03 0x03] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x081734: IN OUT Detect Vref caps: HIZ 50 GRD 80 Pin Default 0x01a1183f: [Jack] Mic at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0x3, Sequence = 0xf Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=08, enabled=1 Connection: 1 0x0e Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x03 0x03] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x08173c: IN OUT HP Detect Vref caps: HIZ 50 GRD 80 Pin Default 0x99a30130: [Fixed] Mic at Int ATAPI Conn = ATAPI, Color = Unknown DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Connection: 2 0x0c* 0x0f Node 0x1a [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0834: IN OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Connection: 1 0x0d Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x08173c: IN OUT HP Detect Vref caps: HIZ 50 GRD 80 Pin Default 0x0121101f: [Jack] HP Out at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0x1, Sequence = 0xf Pin-ctls: 0xc0: OUT HP VREF_HIZ Unsolicited: tag=04, enabled=1 Connection: 2 0x0c* 0x0f Node 0x1c [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Node 0x1d [Pin Complex] wcaps 0x400000: Mono Pincap 0x0820: IN Pin Default 0x598301f0: [N/A] Line In at Int ATAPI Conn = ATAPI, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital Pincap 0x0810: OUT Pin Default 0x99430120: [Fixed] SPDIF Out at Int ATAPI Conn = ATAPI, Color = Unknown DefAssociation = 0x2, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Connection: 1 0x06 Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Processing caps: benign=0, ncoeff=17 Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 11 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b Node 0x23 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x26 [Vendor Defined Widget] wcaps 0xf00000: Mono AppleHDA_for_ALC660_beta_2_.zip Link to comment Share on other sites More sharing options...
realogic Posted April 16, 2008 Share Posted April 16, 2008 I have the same laptop. No driver at the moment, and no patcher works. I'm currently working on a driver, still waiting for someone to send me the first Taruga's HDA guide. Link to comment Share on other sites More sharing options...
DMJC Posted April 16, 2008 Author Share Posted April 16, 2008 awesome yeah if you get any information about how patching intel hda works I'd definately be interested in it. I don't mind getting my hands dirty in config files. Link to comment Share on other sites More sharing options...
realogic Posted April 16, 2008 Share Posted April 16, 2008 First of all, forget Intel. Your Card is a REALTEK ALC-660 VD Cross your finger! Link to comment Share on other sites More sharing options...
DMJC Posted April 17, 2008 Author Share Posted April 17, 2008 how did you get your mic jack working? I just noticed that in your sig. I haven't even got that working atm. Link to comment Share on other sites More sharing options...
DMJC Posted April 19, 2008 Author Share Posted April 19, 2008 I'm going to keep bumping this thread until we get a response. we don't want the hda patcher program, we've tried it and it doesn't work. it says it succeeds installs the driver etc, and it doesn't work. what we want is the documentation on how they made the patcher, not howto use it. We want to go in and edit the driver code directly. Link to comment Share on other sites More sharing options...
rob3r7o Posted August 12, 2008 Share Posted August 12, 2008 Hi, audio work now!! try http://forum.insanelymac.com/index.php?showtopic=120579 Link to comment Share on other sites More sharing options...
Recommended Posts