Bumblebee2010 Posted February 2, 2010 Share Posted February 2, 2010 i have a Error. System config file '/ com.apple.Boot.plist' not found My System HERE Please help me Link to comment https://www.insanelymac.com/forum/topic/98086-kalyway-1052-dvd-intel_amd-sse2sse3-efi-v8/page/43/#findComment-1402156 Share on other sites More sharing options...
lavertb74 Posted February 4, 2010 Share Posted February 4, 2010 Hi. This is my first time on here. I've followed along and everything worked until I had to reboot. I have an Evga x58 sli le. 12 gb DDR 3. Intel quad core i7 920. 2 ATI HD 4770 graphic cards and dual booting with Windows 7 Ult. 64 bit. I down loaded, burned and a successful install of Kalyway 10.5.2. Message comes up "Restart system to finish installation." When I restart my pc, the osx crashes when I directly reboot. (Normall grey screen with Apple logo, then dark grey comes down covering telling me to reboot) If I try -v, -x, -s, -f or even -uw,.. It starts as normall. The screen list gets to "system oem" and just freezes. Every time. I was able to create the dual boot with no problem using EasyBCD. Windows 7 runs solid, no crashes. When I log out and try to boot into OSX, this is what happens. Does anyone know a way I can get past this so I can finish the install? I just need the osx to run Logic 8. And will it detect my sound card? (On board) Thanks so much for your time, help and patience in advance. Link to comment https://www.insanelymac.com/forum/topic/98086-kalyway-1052-dvd-intel_amd-sse2sse3-efi-v8/page/43/#findComment-1403673 Share on other sites More sharing options...
YouCabo Posted February 9, 2010 Share Posted February 9, 2010 Thank you so very much a lot!!! Link to comment https://www.insanelymac.com/forum/topic/98086-kalyway-1052-dvd-intel_amd-sse2sse3-efi-v8/page/43/#findComment-1406833 Share on other sites More sharing options...
Mat04190 Posted February 23, 2010 Share Posted February 23, 2010 Thank !!! Link to comment https://www.insanelymac.com/forum/topic/98086-kalyway-1052-dvd-intel_amd-sse2sse3-efi-v8/page/43/#findComment-1415935 Share on other sites More sharing options...
bonmac Posted February 24, 2010 Share Posted February 24, 2010 Hey, the installation of Kalyway was not a problem, also booting works. BUT:When Mac starts, there comes the welcome sound but the display doesnt work!! It shows weired flickering symbols. What can I do?? I installed first with "Graphic Drivers X1000 series", then all Graphic Drivers. Both lead to the display error. Please help! Didnt find an answer to my question yet... System: Ati Radeon Xpress 1100, AMD Turion 64 X2 Link to comment https://www.insanelymac.com/forum/topic/98086-kalyway-1052-dvd-intel_amd-sse2sse3-efi-v8/page/43/#findComment-1417154 Share on other sites More sharing options...
georgie99 Posted March 4, 2010 Share Posted March 4, 2010 hi,kaly.i got a problem when installed 10.5.2 DVD Intel_Amd (sse2/sse3) EFI V8 on asus k50in.the problem i had encountered : error :Uncompressed file is not the length recorded. error :couldn't uncompress plist file from multikext entry 0 Any advice to overcome this problem?help me.what should i do?i used already asus k50in boot-cd..but the problem still there.. Link to comment https://www.insanelymac.com/forum/topic/98086-kalyway-1052-dvd-intel_amd-sse2sse3-efi-v8/page/43/#findComment-1422558 Share on other sites More sharing options...
xeric Posted March 16, 2010 Share Posted March 16, 2010 thankss.... Link to comment https://www.insanelymac.com/forum/topic/98086-kalyway-1052-dvd-intel_amd-sse2sse3-efi-v8/page/43/#findComment-1429659 Share on other sites More sharing options...
bx3 Posted April 7, 2010 Share Posted April 7, 2010 Thanks a lot Link to comment https://www.insanelymac.com/forum/topic/98086-kalyway-1052-dvd-intel_amd-sse2sse3-efi-v8/page/43/#findComment-1443453 Share on other sites More sharing options...
Nebil Abdella Posted April 8, 2010 Share Posted April 8, 2010 Kalyway 10.5.2 DVD Intel_Amd (sse2/sse3) EFI V8 you can find HELP on: #kalyway.DVD irc.osx86.hu #leopard irc.osx86.hu DONATION at http://kalyway.xdir.fr DONATE for this DVD !!! checksum for Kalyway_10.5.2_DVD_Intel_Amd.iso SHA-1 d48c058c8f2e61a636556fc3152208a35a96150d MD5 e03af401cc9e0baab1401199170ddf99 Read carefully !!! if you want adding drivers support to dvd boot you must put the Kalyway_10.5.2_DVD_Intel_Amd folder on your desktop then put kexts you want add to dvd extensions in the ADD_KEXT_TO_DVD folder (you can find natit for ati hd in this folder) and run Add_kext_to_dvd_boot.command !!! all ich support ! sitll remain problem with jmicron ide dvd support ! based on slipstream script by DENSE ! ichx (all ports) support by DUNE ! Notes: if you have problems on reboot with video gfx (blue or black screen) All you have to do is just press F8 at Darwin's prompt and then type -s (single user mode) then at root type mount -uw / and /movevideodrivers then it will be prompt to move video drivers by class ( nvidia ; ati ; or intel gma) voila! type yes to confirm or enter to skip ! Even if you have chosen a kernel at install, you can still try the others kernels after installation ! (same thing for dvd boot except that only modbinkernel , speedstepkernel , kabylkernel and nforcekernel are available as boot options !) All you have to do is just press F8 at Darwin's prompt and then type the kernel's name you want to boot with : sleepkernel (intel/amd/sse2/sse3) speedstepkernel (intel/amd/sse2/sse3) nforcekernel (intel/sse3) modbinkernel (intel/amd/sse3) vanillakernel (intel/sse3) kabylkernel (intel/sse3) with sleep support Kernels kernel_9.2_sleep kernel_9.2_speedstep kernel_9.2.2_kabyl kernel_922_modbin kernel_92_nforce kernel_vanilla_922 Graphics_Drivers Ati_Radeon X1000Series ATYinject for 19xx series NATIT_For_X1000_series ATIRadeonX1000SeriesGraphics 1950gt_pro X2000_HD_and_X3000_HD_Series NATIT_For_X2000_X3000_Series HD2900xt_pro white_menus_fixe_HD2600_pro white_menus_fixe_HD3850_3870x2 ATI_Radeon_HD_2600_Pro_AGP (this one no need for natit and white menufix) ATI_Radeon_HD_2600_XT_AGP (this one no need for natit and white menufix) Nvidia_Geforce (select one only) NVinject NVinject-128 NVinject-256 NVinject-320 NVinject-512 NVinject-640 NVinject-768 NVinjectGO NVinjectGO-512 NVInject_Clevo_M570RU 8700gfx NATIT_gfnvidia Intel_GMA GMA950 (tiger one full accelerated and resolution support but with mouse artifact) GMAX3100 (not tested) Audio_Drivers Intel NVIDIA VIA ATI HDAudioController NVIDIAAC97Audio Realtek Sigmatel ConexantAnalogDevicesHDAudioCodec (generic output support) ALC883_DS3,p5k pro etc... alc889a_shutdown_support ALC882_p5w_dh_deluxe sigmatel_9200_inspiron_9400 Networks_Drivers Networks_Cards AppleBCM440XEthernet AppleBCM5751Ethernet AppleRTL8169Ethernet MarvellNetworkAdapter RealtekR1000 skge_marvell forcedeth Wifi_Card IO80211Family AtherosWirelessAdapter Zydas-ZD1211-1215 wifi_Broadcom_airport RT2500-RT73-USB wifi_AP_Realtek_RTL8187L wifi_Realtek_RTL8187B iwi2200beta Mobo_Chipsets (support for ati ; nvidia ; intel ; via ; sis ; marvell ; jmicron) AppleNForceATA AppleOnboardPCATA AppleVIAATA AppleGenericPCATA SiliconImage3132 Thirds_Applications (will be installed in /applications/KOOLSOFTS/) adium archives candybar changeFinder colloquy fairmount Growl GmailNotifier kextHelperB7 onyx Iphoto macam_iusbcam MacTheRipper Mojo Proxi pacifist perian ppfomatic SimplyBurns solarseek stuffitExpander textmate transmission vlc xbench Patches Hardcoded_SMBIOS Lastnetkassmbios (with coreplayer fix , mozzy and logmein !) AppleSMBIOS-27-Default AppleSMBIOS-27-667 AppleSMBIOS-27-800 AppleSMBIOS-27-1066 AppleSMBIOS-27-DDR3-1333 AppleSMBIOS-27-IM AppleSMBIOS-27-MB AppleSMBIOS-27-MBMem AppleSMBIOS-27-MP OLD tiger SMBIOS_1.0.1 SSE2_Jas1048_ACPI_APIC (may or not work) AppleACPIPlatform AppleAPIC Others PATCHES cpus=1 flag Francais_pc_keyboard_layout TimeMachineFix PowerManagement_bundle (don't install it if you have select sse2 patch !!!) IntelMemoryController USBPCGen (fix usbehci detection problem , enable usb2) AMD_1052_Patches (select patch 1 or patch 2) AMD_1052_Patch_test_1 AMD_1052_Patch_test_2 -legacy flag BIG THX to Dune , Dense , modbin, jas , Joe75 , etorix , netkas , rp4k , tehmachacker ,zef , kabyl , magicone , jacquesdupontd , lastexile , chiva4ry , rofl , unisex ,asap18 , xyz , and all the others ! you know who you are! Think of this as of a demo version and as of a free marketing campaign. Therefore, let it be ENJOY ! if you love MacOSX think to buy it !!! This DVD should only be used to preview Mac OS X Leopard. If you really like Mac OS X Leopard and you want to use it, you should get a real Mac. If buying a real Mac is too much, you can, at least, buy a license for Mac OS X Leopard. Hi my name is Nebil, and i just couldn't get any answers from anybody. I have my pc specs but nobody will reply to me. I've been in researching this topic and so far nothing. Please your my only hope to bringing me back to sanity. i don't know whether to install kalyway 10.5.2 or iatkos 1/2.0 i. Please, please you've got to help me or pass it to someone who can. Here is my pc spec. And can you please if possible tell me where i can download the software from and e-mail me your reply (again if it is no bother) through this address :thor1872002@yahoo.com. Thank you. here is my info. Motherboard: Asrock Wolfdale 1333 D 667 A2 Processor: Intel Pentium D 950 CPU: 3.40GHz RAM: 1.0GB DDR 2 RAM Southbridge: Intel 82801GB (ICH7/ R) Graphics: Intel 82945G Express Chipset Family ( REVISION- 2) BIOS Version : P 1.50 OS: Window XP Sp 2 ******Supports*********** 1. MMX, SSE, SSE2, SSE3, EM64T Kalyway 10.5.2 DVD Intel_Amd (sse2/sse3) EFI V8 you can find HELP on: #kalyway.DVD irc.osx86.hu #leopard irc.osx86.hu DONATION at http://kalyway.xdir.fr DONATE for this DVD !!! checksum for Kalyway_10.5.2_DVD_Intel_Amd.iso SHA-1 d48c058c8f2e61a636556fc3152208a35a96150d MD5 e03af401cc9e0baab1401199170ddf99 Read carefully !!! if you want adding drivers support to dvd boot you must put the Kalyway_10.5.2_DVD_Intel_Amd folder on your desktop then put kexts you want add to dvd extensions in the ADD_KEXT_TO_DVD folder (you can find natit for ati hd in this folder) and run Add_kext_to_dvd_boot.command !!! all ich support ! sitll remain problem with jmicron ide dvd support ! based on slipstream script by DENSE ! ichx (all ports) support by DUNE ! Notes: if you have problems on reboot with video gfx (blue or black screen) All you have to do is just press F8 at Darwin's prompt and then type -s (single user mode) then at root type mount -uw / and /movevideodrivers then it will be prompt to move video drivers by class ( nvidia ; ati ; or intel gma) voila! type yes to confirm or enter to skip ! Even if you have chosen a kernel at install, you can still try the others kernels after installation ! (same thing for dvd boot except that only modbinkernel , speedstepkernel , kabylkernel and nforcekernel are available as boot options !) All you have to do is just press F8 at Darwin's prompt and then type the kernel's name you want to boot with : sleepkernel (intel/amd/sse2/sse3) speedstepkernel (intel/amd/sse2/sse3) nforcekernel (intel/sse3) modbinkernel (intel/amd/sse3) vanillakernel (intel/sse3) kabylkernel (intel/sse3) with sleep support Kernels kernel_9.2_sleep kernel_9.2_speedstep kernel_9.2.2_kabyl kernel_922_modbin kernel_92_nforce kernel_vanilla_922 Graphics_Drivers Ati_Radeon X1000Series ATYinject for 19xx series NATIT_For_X1000_series ATIRadeonX1000SeriesGraphics 1950gt_pro X2000_HD_and_X3000_HD_Series NATIT_For_X2000_X3000_Series HD2900xt_pro white_menus_fixe_HD2600_pro white_menus_fixe_HD3850_3870x2 ATI_Radeon_HD_2600_Pro_AGP (this one no need for natit and white menufix) ATI_Radeon_HD_2600_XT_AGP (this one no need for natit and white menufix) Nvidia_Geforce (select one only) NVinject NVinject-128 NVinject-256 NVinject-320 NVinject-512 NVinject-640 NVinject-768 NVinjectGO NVinjectGO-512 NVInject_Clevo_M570RU 8700gfx NATIT_gfnvidia Intel_GMA GMA950 (tiger one full accelerated and resolution support but with mouse artifact) GMAX3100 (not tested) Audio_Drivers Intel NVIDIA VIA ATI HDAudioController NVIDIAAC97Audio Realtek Sigmatel ConexantAnalogDevicesHDAudioCodec (generic output support) ALC883_DS3,p5k pro etc... alc889a_shutdown_support ALC882_p5w_dh_deluxe sigmatel_9200_inspiron_9400 Networks_Drivers Networks_Cards AppleBCM440XEthernet AppleBCM5751Ethernet AppleRTL8169Ethernet MarvellNetworkAdapter RealtekR1000 skge_marvell forcedeth Wifi_Card IO80211Family AtherosWirelessAdapter Zydas-ZD1211-1215 wifi_Broadcom_airport RT2500-RT73-USB wifi_AP_Realtek_RTL8187L wifi_Realtek_RTL8187B iwi2200beta Mobo_Chipsets (support for ati ; nvidia ; intel ; via ; sis ; marvell ; jmicron) AppleNForceATA AppleOnboardPCATA AppleVIAATA AppleGenericPCATA SiliconImage3132 Thirds_Applications (will be installed in /applications/KOOLSOFTS/) adium archives candybar changeFinder colloquy fairmount Growl GmailNotifier kextHelperB7 onyx Iphoto macam_iusbcam MacTheRipper Mojo Proxi pacifist perian ppfomatic SimplyBurns solarseek stuffitExpander textmate transmission vlc xbench Patches Hardcoded_SMBIOS Lastnetkassmbios (with coreplayer fix , mozzy and logmein !) AppleSMBIOS-27-Default AppleSMBIOS-27-667 AppleSMBIOS-27-800 AppleSMBIOS-27-1066 AppleSMBIOS-27-DDR3-1333 AppleSMBIOS-27-IM AppleSMBIOS-27-MB AppleSMBIOS-27-MBMem AppleSMBIOS-27-MP OLD tiger SMBIOS_1.0.1 SSE2_Jas1048_ACPI_APIC (may or not work) AppleACPIPlatform AppleAPIC Others PATCHES cpus=1 flag Francais_pc_keyboard_layout TimeMachineFix PowerManagement_bundle (don't install it if you have select sse2 patch !!!) IntelMemoryController USBPCGen (fix usbehci detection problem , enable usb2) AMD_1052_Patches (select patch 1 or patch 2) AMD_1052_Patch_test_1 AMD_1052_Patch_test_2 -legacy flag BIG THX to Dune , Dense , modbin, jas , Joe75 , etorix , netkas , rp4k , tehmachacker ,zef , kabyl , magicone , jacquesdupontd , lastexile , chiva4ry , rofl , unisex ,asap18 , xyz , and all the others ! you know who you are! Think of this as of a demo version and as of a free marketing campaign. Therefore, let it be ENJOY ! if you love MacOSX think to buy it !!! This DVD should only be used to preview Mac OS X Leopard. If you really like Mac OS X Leopard and you want to use it, you should get a real Mac. If buying a real Mac is too much, you can, at least, buy a license for Mac OS X Leopard. Link to comment https://www.insanelymac.com/forum/topic/98086-kalyway-1052-dvd-intel_amd-sse2sse3-efi-v8/page/43/#findComment-1444361 Share on other sites More sharing options...
Jonmartin Posted April 21, 2010 Share Posted April 21, 2010 Hello all I'm a newb but heres what I've accomplished so far. this is my system Processor= AMD Athlon 64x2 Dual Core 3800+ Motherboard= Gigabyte GA-K8U-939 Chipset= ULi M1689 Graphics= ATI Radeon 9800 PRO Networking= Realtek RTL8139 Sound= Realtek AC97 Audio -or- Soundblaster Audigy Z2s (whatever works) Harddrive= Seagate Barracuda 7200 Opticaldrive = Magicspin its not fancy i know but I used this distro to get osx installed and now i'm at the setup page to enter my info but i basically forgot about the fact i have an old non usb keyboard so i have to buy one. but anyway my question is can I install kext after install for my sound,video,and ethernet as I didn't see the options for my hardware listed to check of during install using this distro. But i'm confused wheather i'm supposed to make my own disk with the kext in a folder or can i just ad them after the fact somehow? Link to comment https://www.insanelymac.com/forum/topic/98086-kalyway-1052-dvd-intel_amd-sse2sse3-efi-v8/page/43/#findComment-1452729 Share on other sites More sharing options...
Jonmartin Posted April 21, 2010 Share Posted April 21, 2010 Well I got the keyboard working for now by unplugging the mouse during boot and plugging it back in after the OS loaded. I now browsing using the setup above but I have no sound. So if anyone can help it would be much appreciated and also how can I get higher resolution from my monitor because its stuck in 1024x768 this is what i copy and pasted from "system proflier" ATI Radeon 9800 PRO: Chipset Model: ATI Radeon 9800 PRO Type: Display Bus: PCI Slot: Slot-1 VRAM (Total): 512 MB Vendor: ATI (0x1002) Device ID: 0x4e48 Revision ID: 0x0000 ROM Revision: ATYinject X1900 0.0.1 EFI Driver Version: "01.00.140" Displays: Display: Resolution: 1024 x 768 Depth: 32-bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported Display Connector: Link to comment https://www.insanelymac.com/forum/topic/98086-kalyway-1052-dvd-intel_amd-sse2sse3-efi-v8/page/43/#findComment-1452755 Share on other sites More sharing options...
Music_remedy Posted April 21, 2010 Share Posted April 21, 2010 I'm trying to install this distro to the following rig: AMD Athlon 64 X2 4200+, 2xGeForce 6600GT, 2,5 GB RAm (it's 3GB but the nForce4 SLI chipeset doesn't sees it). I have 3 SATA HDDs and i'm using IDE DVD Rom. However no matter what, I can't get past the welcome screen. After that it just hangs/freezes. I tried different Kernels, unplugged the 2nd VGA (because after some RTFM and STFW as far as i get it, OSX don't like SLI) but still nothing.. any help? Link to comment https://www.insanelymac.com/forum/topic/98086-kalyway-1052-dvd-intel_amd-sse2sse3-efi-v8/page/43/#findComment-1453210 Share on other sites More sharing options...
koolsilver Posted April 25, 2010 Share Posted April 25, 2010 Kalyway 10.5.2 DVD Intel_Amd (sse2/sse3) EFI V8 you can find HELP on: #kalyway.DVD irc.osx86.hu #leopard irc.osx86.hu DONATION at http://kalyway.xdir.fr DONATE for this DVD !!! checksum for Kalyway_10.5.2_DVD_Intel_Amd.iso SHA-1 d48c058c8f2e61a636556fc3152208a35a96150d MD5 e03af401cc9e0baab1401199170ddf99 Read carefully !!! if you want adding drivers support to dvd boot you must put the Kalyway_10.5.2_DVD_Intel_Amd folder on your desktop then put kexts you want add to dvd extensions in the ADD_KEXT_TO_DVD folder (you can find natit for ati hd in this folder) and run Add_kext_to_dvd_boot.command !!! all ich support ! sitll remain problem with jmicron ide dvd support ! based on slipstream script by DENSE ! ichx (all ports) support by DUNE ! Notes: if you have problems on reboot with video gfx (blue or black screen) All you have to do is just press F8 at Darwin's prompt and then type -s (single user mode) then at root type mount -uw / and /movevideodrivers then it will be prompt to move video drivers by class ( nvidia ; ati ; or intel gma) voila! type yes to confirm or enter to skip ! Even if you have chosen a kernel at install, you can still try the others kernels after installation ! (same thing for dvd boot except that only modbinkernel , speedstepkernel , kabylkernel and nforcekernel are available as boot options !) All you have to do is just press F8 at Darwin's prompt and then type the kernel's name you want to boot with : sleepkernel (intel/amd/sse2/sse3) speedstepkernel (intel/amd/sse2/sse3) nforcekernel (intel/sse3) modbinkernel (intel/amd/sse3) vanillakernel (intel/sse3) kabylkernel (intel/sse3) with sleep support Kernels kernel_9.2_sleep kernel_9.2_speedstep kernel_9.2.2_kabyl kernel_922_modbin kernel_92_nforce kernel_vanilla_922 Graphics_Drivers Ati_Radeon X1000Series ATYinject for 19xx series NATIT_For_X1000_series ATIRadeonX1000SeriesGraphics 1950gt_pro X2000_HD_and_X3000_HD_Series NATIT_For_X2000_X3000_Series HD2900xt_pro white_menus_fixe_HD2600_pro white_menus_fixe_HD3850_3870x2 ATI_Radeon_HD_2600_Pro_AGP (this one no need for natit and white menufix) ATI_Radeon_HD_2600_XT_AGP (this one no need for natit and white menufix) Nvidia_Geforce (select one only) NVinject NVinject-128 NVinject-256 NVinject-320 NVinject-512 NVinject-640 NVinject-768 NVinjectGO NVinjectGO-512 NVInject_Clevo_M570RU 8700gfx NATIT_gfnvidia Intel_GMA GMA950 (tiger one full accelerated and resolution support but with mouse artifact) GMAX3100 (not tested) Audio_Drivers Intel NVIDIA VIA ATI HDAudioController NVIDIAAC97Audio Realtek Sigmatel ConexantAnalogDevicesHDAudioCodec (generic output support) ALC883_DS3,p5k pro etc... alc889a_shutdown_support ALC882_p5w_dh_deluxe sigmatel_9200_inspiron_9400 Networks_Drivers Networks_Cards AppleBCM440XEthernet AppleBCM5751Ethernet AppleRTL8169Ethernet MarvellNetworkAdapter RealtekR1000 skge_marvell forcedeth Wifi_Card IO80211Family AtherosWirelessAdapter Zydas-ZD1211-1215 wifi_Broadcom_airport RT2500-RT73-USB wifi_AP_Realtek_RTL8187L wifi_Realtek_RTL8187B iwi2200beta Mobo_Chipsets (support for ati ; nvidia ; intel ; via ; sis ; marvell ; jmicron) AppleNForceATA AppleOnboardPCATA AppleVIAATA AppleGenericPCATA SiliconImage3132 Thirds_Applications (will be installed in /applications/KOOLSOFTS/) adium archives candybar changeFinder colloquy fairmount Growl GmailNotifier kextHelperB7 onyx Iphoto macam_iusbcam MacTheRipper Mojo Proxi pacifist perian ppfomatic SimplyBurns solarseek stuffitExpander textmate transmission vlc xbench Patches Hardcoded_SMBIOS Lastnetkassmbios (with coreplayer fix , mozzy and logmein !) AppleSMBIOS-27-Default AppleSMBIOS-27-667 AppleSMBIOS-27-800 AppleSMBIOS-27-1066 AppleSMBIOS-27-DDR3-1333 AppleSMBIOS-27-IM AppleSMBIOS-27-MB AppleSMBIOS-27-MBMem AppleSMBIOS-27-MP OLD tiger SMBIOS_1.0.1 SSE2_Jas1048_ACPI_APIC (may or not work) AppleACPIPlatform AppleAPIC Others PATCHES cpus=1 flag Francais_pc_keyboard_layout TimeMachineFix PowerManagement_bundle (don't install it if you have select sse2 patch !!!) IntelMemoryController USBPCGen (fix usbehci detection problem , enable usb2) AMD_1052_Patches (select patch 1 or patch 2) AMD_1052_Patch_test_1 AMD_1052_Patch_test_2 -legacy flag BIG THX to Dune , Dense , modbin, jas , Joe75 , etorix , netkas , rp4k , tehmachacker ,zef , kabyl , magicone , jacquesdupontd , lastexile , chiva4ry , rofl , unisex ,asap18 , xyz , and all the others ! you know who you are! Think of this as of a demo version and as of a free marketing campaign. Therefore, let it be ENJOY ! if you love MacOSX think to buy it !!! This DVD should only be used to preview Mac OS X Leopard. If you really like Mac OS X Leopard and you want to use it, you should get a real Mac. If buying a real Mac is too much, you can, at least, buy a license for Mac OS X Leopard. Thanks trying now Link to comment https://www.insanelymac.com/forum/topic/98086-kalyway-1052-dvd-intel_amd-sse2sse3-efi-v8/page/43/#findComment-1455270 Share on other sites More sharing options...
chirag_jain Posted May 1, 2010 Share Posted May 1, 2010 I recently got a Dell Studio 15 with core i7 , 4GB DDR3 . I wish to install leopard on my notebook. Can anyone plz tell me the exact procedure ? i have this (Kalyway 10.5.2 DVD Intel_Amd (sse2/sse3) EFI V8) dvd with me. Even i can try Snow Leopard. So plz guide me which one is best suitable for my lappy config. Link to comment https://www.insanelymac.com/forum/topic/98086-kalyway-1052-dvd-intel_amd-sse2sse3-efi-v8/page/43/#findComment-1459470 Share on other sites More sharing options...
REcruit_ Posted May 2, 2010 Share Posted May 2, 2010 OMG thanks for this Kalyyour great Agreed Link to comment https://www.insanelymac.com/forum/topic/98086-kalyway-1052-dvd-intel_amd-sse2sse3-efi-v8/page/43/#findComment-1459909 Share on other sites More sharing options...
javierandress Posted May 3, 2010 Share Posted May 3, 2010 ola bueno tengo las siguientes caracteristicas de mi pc. Quiero saber si me puedo ilucionar con tener osx en mi pc, ya que seria de mucha utilidad, al ocupar programas de edición como final cut. Bueno espero que me ayuden y así saber mas sobre este gran S.O Nombre del motherboard: Zotac GeForce 6100 Value Tipo de CPU: DualCore AMD Athlon 64 X2, 2100 MHz (10.5 x 200) 4000+ Juego de instrucciones: x86, x86-64, MMX, 3DNow!, SSE, SSE2, SSE3 RAM: Total 2 GB T.video: "integrada" gforce 6100 Sistema Operativo: Microsoft Windows XP Professional Link to comment https://www.insanelymac.com/forum/topic/98086-kalyway-1052-dvd-intel_amd-sse2sse3-efi-v8/page/43/#findComment-1460587 Share on other sites More sharing options...
lechicuong Posted May 29, 2010 Share Posted May 29, 2010 my laptop is Vaio VGN-TZ17GN, i installed kalyway successfully but i cant boot it from hdd, it needs Kalyway DVD to boot into MAC, plz help me. now my laptop was installed Win Vista and Mac Osx Kalyway 10.5.2.. Link to comment https://www.insanelymac.com/forum/topic/98086-kalyway-1052-dvd-intel_amd-sse2sse3-efi-v8/page/43/#findComment-1477723 Share on other sites More sharing options...
1dreidrei7 Posted June 4, 2010 Share Posted June 4, 2010 big thanks Link to comment https://www.insanelymac.com/forum/topic/98086-kalyway-1052-dvd-intel_amd-sse2sse3-efi-v8/page/43/#findComment-1481818 Share on other sites More sharing options...
Justin_Case Posted June 4, 2010 Share Posted June 4, 2010 Disk read error! HELP! The install went well, but when I went to restart my computer to dual boot between this release and XP It now says Disk read error occured Press Ctrl+Alt+Del to restart EeeK! Been reading around and haven't found any solutions. I was stupid and hadn't backed up my data, so I have tons of family photos on there I can't lose. I've tried all the solutions posted around but am going crazy. I tried moving the jumpers between CS and Master, that did nothing. I tried Booting from the windows disk and doing a Chkdsk, everything appears to be great. And I just tried deleting the partition and then doing a Fixmbr after trying to avoid it for days. Nothing seems to be working. I used Gparted to set the XP partition to boot, but it didn't work and then I tried setting it to the mac partition and that did nothing as well (before I deleted the partition). Pulling my hair out Q.Q would love any help. Formatting is not an option. Link to comment https://www.insanelymac.com/forum/topic/98086-kalyway-1052-dvd-intel_amd-sse2sse3-efi-v8/page/43/#findComment-1482148 Share on other sites More sharing options...
Pable Elbap Posted June 5, 2010 Share Posted June 5, 2010 thanks ill try it i did try it there was an error Link to comment https://www.insanelymac.com/forum/topic/98086-kalyway-1052-dvd-intel_amd-sse2sse3-efi-v8/page/43/#findComment-1482812 Share on other sites More sharing options...
Rajan Pandit Posted June 15, 2010 Share Posted June 15, 2010 kindly tell me how can I install my atheros 8112 ethernet driver on my mac os x 10.5.2 kalway.... Link to comment https://www.insanelymac.com/forum/topic/98086-kalyway-1052-dvd-intel_amd-sse2sse3-efi-v8/page/43/#findComment-1489333 Share on other sites More sharing options...
SnakeBound Posted July 4, 2010 Share Posted July 4, 2010 Hello there i have a problem after install kalyway i put -v mode and it was frozen at Mac framework successfully initialized using 15728 buffer headers and 4096 cluster IO buffer headers Link to comment https://www.insanelymac.com/forum/topic/98086-kalyway-1052-dvd-intel_amd-sse2sse3-efi-v8/page/43/#findComment-1504645 Share on other sites More sharing options...
shovelhed Posted July 8, 2010 Share Posted July 8, 2010 cool. Curious to have a peek at this. Many thanks. Link to comment https://www.insanelymac.com/forum/topic/98086-kalyway-1052-dvd-intel_amd-sse2sse3-efi-v8/page/43/#findComment-1507241 Share on other sites More sharing options...
spy 1 Posted July 10, 2010 Share Posted July 10, 2010 Hi there this is my fist time trying to install this on my HP dv4-1220us. I have downloaded this distro and burned it onto a dvd when I boot from the cd-rom it will start and when I need to type -s it keeps going then restarts anyone knows why ? what can I do to install this on my notebook any help is welcom Link to comment https://www.insanelymac.com/forum/topic/98086-kalyway-1052-dvd-intel_amd-sse2sse3-efi-v8/page/43/#findComment-1508572 Share on other sites More sharing options...
jamesensor Posted July 15, 2010 Share Posted July 15, 2010 Hi! I have a hp dv6175ea of the dv6000 series, i just would like to know what options should i choose in the instalation regarding sound, chipset, etc etc. Can someone kindly help me please? Here's my specs, it's in a pic http://tinypic.com/r/2921x21/3 or in cpu-z in attachment bellow i think other laptop users could benefit from this as well in the hp dv6 series. (in my case i already have the partition made and i know how to dual boot, learned from other tutorials, and even installed a leopard os but the boot gets freeze in the mac white logo screen, so i had to -x when booting) Thank you all and hope some kind soul can help me on this... PC.html Link to comment https://www.insanelymac.com/forum/topic/98086-kalyway-1052-dvd-intel_amd-sse2sse3-efi-v8/page/43/#findComment-1511541 Share on other sites More sharing options...
Recommended Posts