fusionlance Posted April 12, 2008 Share Posted April 12, 2008 Sorry for the newb question, but how do I repair my permissions? Diskutil repairs permission for the whole disk (slower), this method only repairs /System/Library/Extensions (alot faster, assuming that you only edited file located here) 1. sudo chmod -R 755 /System/Library/Extensions 2. sudo chown -R 0:0 /System/Library/Extensions 3. sudo rm -R /System/Library/Extensions.mkext 4. restart Correct me if I'm wrong, you can skip step 3 if you key in -f during the next reboot @ sonotone, Just to confirm all the kext are installed to /Inspiron/ rite? Not /system/library/extensions/ ? Sound from the package does not work, HDApatcher + dump also didn't work. Taruga's STAC9228_0x83847616.zip only manage to enable the icon (mute, vol up/down) but no sound comes out. Link to comment Share on other sites More sharing options...
sonotone Posted April 12, 2008 Author Share Posted April 12, 2008 @ sonotone, Just to confirm all the kext are installed to /Inspiron/ rite? Not /system/library/extensions/ ? No, this is back-up of your old kexts (replaced by installer). Sound from the package does not work, HDApatcher + dump also didn't work. Taruga's STAC9228_0x83847616.zip only manage to enable the icon (mute, vol up/down) but no sound comes out. Check if AppleAzalia.kext is still in your Extensions folder; and remove it (i think i forgot to put this script in latest version). Link to comment Share on other sites More sharing options...
fusionlance Posted April 12, 2008 Share Posted April 12, 2008 Check if AppleAzalia.kext is still in your Extensions folder; and remove it (i think i forgot to put this script in latest version). Yup, double check with spotlight, no such kext (maybe Kalyway doens't have this). Manually search with the closest result: AppleAPIC.kext and AppleBacklight.kext. If it's there, it should be between those 2 (alphabatically) My audio is SigmaTel High Definition Audio CODEC STAC9228 VEN_8384&DEV_7616 I've also attached a modified IONetworking.kext. It kinda works (shows up in Network, Profiler), but shows "Network cable unplug" regardless of cable connection It's a Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller with VEN_11AB&DEV_4354 UPDATE 15th June: There is currently NO working solution for the 88E8040. I've already tried editing the 88E8039 plist (AppleYukon), that didn't work and the AppleYukon2 (attatchment below) also didn't do the trick. And if you're wondering, it's not the PCIe bus issue affecting some Acer models. So if you really can't live without ethernet, I'd suggest you to get a USB ethernet dongle. It's cheap and it'll probally work, here's a link for more info: http://www.sustworks.com/site/news_usb_ethernet.html IONetworkingFamily.kext.rar Link to comment Share on other sites More sharing options...
sonotone Posted April 12, 2008 Author Share Posted April 12, 2008 My audio is SigmaTel High Definition Audio CODEC STAC9228VEN_8384&DEV_7616 Same ID as the one used for installer. Go to audio-midi configuration, maybe a wrong audio device is checked. Link to comment Share on other sites More sharing options...
fusionlance Posted April 12, 2008 Share Posted April 12, 2008 Same ID as the one used for installer Did profiler show built in audio? Mine didn't. Now this is really strange. Since I couldn't get audio working with kext helper, I did everything manually (taruga's applehda and inject). After reboot I got audio, volume up/down (maybe because I didn't do diskutil repairpermissions / when using kext helper), mute button doesn't work though. Went to midi config in Utilities and tested speaker configuration, got a loud static hissing (is it suppose to give that sound or music instead?). Just to confirm my audio works, I reboot and... find out that audio is GONE again. That's all I can manage for today, will have to continue tomorrow (guess I'll be having nightmares 6 nites in a row ) Link to comment Share on other sites More sharing options...
fusionlance Posted April 13, 2008 Share Posted April 13, 2008 Tried fixing the battery meter, it worked but media keys went haywire and sleep changed to restart (changed the safe sleep stuff). After login, internal mobo speaker gives warning (don't know what it means), so I reboot into Vista. HWMonitor shows the processor -16 C min (impossible since I'm living in a tropical country) and 98 C max (not F). Wow, Intel specs at their website specifies a max of 100 C for my processor, thermal diode must've kicked in... I'm lucky. Won't be touching power related kext again, ever. UPDATE: The culprit was Sleep, not Sonotone's package. Link to comment Share on other sites More sharing options...
realityloop Posted April 13, 2008 Share Posted April 13, 2008 I'm not having much luck on my XPS M1330 -I install iATKOS 1.0i --EFI --SMBIOS --NTFS --ext2fs Working without sound or network -Run the KalywayIntelCombo10.5.2 update, which works fine but still without sound or network -Install Build 0.2.2 --NVidia 8xxx Series --Sigmatel 9228 --Apple SMBios (both items ticked) --Brittish Keyboard --XPS M1330 2 finger scrolling Fix permissions as per fusionlance's instructions OSX no longer boots, I get screen telling me to reboot with power icon on back of window... Any ideas? Link to comment Share on other sites More sharing options...
sonotone Posted April 13, 2008 Author Share Posted April 13, 2008 Install Build 0.2.2--NVidia 8xxx Series --Sigmatel 9228 --Apple SMBios (both items ticked) --Brittish Keyboard --XPS M1330 2 finger scrolling Fix permissions as per fusionlance's instructions OSX no longer boots, I get screen telling me to reboot with power icon on back of window... Any ideas? Sorry but i quote myself (first post): "TESTERS: Please give your laptop model (and Hardware), release used, and Kernel installed. A step by step installation will be better to report each section problem. Thanks." Anyway, i think you lost your Applesmbios by choosing both of them, but maybe i'm wrong. If you can boot in Verbose mode (type -v in bootloader options) and take a picture of the screen with error message. Also try -x option (safe mode boot). Tried fixing the battery meter, it worked but media keys went haywire and sleep changed to restart (changed the safe sleep stuff).After login, internal mobo speaker gives warning (don't know what it means), so I reboot into Vista. HWMonitor shows the processor -16 C min (impossible since I'm living in a tropical country) and 98 C max (not F). Wow, Intel specs at their website specifies a max of 100 C for my processor, thermal diode must've kicked in... I'm lucky. Won't be touching power related kext again, ever. What do you mean by "Tried fixing the battery meter": manually or with installer? It's strange cause there is no shared kexts/files between battery meter and media keys. Also, i removed AppleACPIThermal.kext inside AppleACPIPlatform.kext to prevent high temperatures problems. But if you are in Tropical environement and CPU is working hard, maybe it's a "normal" issue, assuming that PC laptops are significantly warmer when they are running OSX (especially whitout speedstep kernel) Link to comment Share on other sites More sharing options...
macgirl Posted April 13, 2008 Share Posted April 13, 2008 Any reports on how this plays with the M1730?Edit: Ok, in my case it still doesn't get me around the video card issues I've got. Oh well. Which video card does your m1730 has? Did profiler show built in audio? Mine didn't. Now this is really strange. Since I couldn't get audio working with kext helper, I did everything manually (taruga's applehda and inject). After reboot I got audio, volume up/down (maybe because I didn't do diskutil repairpermissions / when using kext helper), mute button doesn't work though.Went to midi config in Utilities and tested speaker configuration, got a loud static hissing (is it suppose to give that sound or music instead?). Just to confirm my audio works, I reboot and... find out that audio is GONE again. If you read the thread of the Guide I made you will see a lot of post with these audio issues, some users came with sound after sleep, some booting on Battery (no AC adapter connected), I also experienced lost sound if I booted on windows first (but after botting twicen in Mac OS X I got sound). Remember that the 9228 kext is experimental. Also, i removed AppleACPIThermal.kext inside AppleACPIPlatform.kext to prevent high temperatures problems. But if you are in Tropical environement and CPU is working hard, maybe it's normal issue, assuming that PC laptops are significantly warmer when they are running OSX (especially whitout speedstep kernel) Is not just the SpeedStep kernel, it also need the speedstep kext and the speedstep app. kernel alone makes no difference. Link to comment Share on other sites More sharing options...
sonotone Posted April 13, 2008 Author Share Posted April 13, 2008 Is not just the SpeedStep kernel, it also need the speedstep kext and the speedstep app. kernel alone makes no difference. "I must admit that I find that you are being what you might call just a little picky" Link to comment Share on other sites More sharing options...
jasestu Posted April 13, 2008 Share Posted April 13, 2008 Which video card does your m1730 has? Hey. I've got the 2 x 256 mb nVIDIA GeForce 8700M GT cards. Is that enough detail? Link to comment Share on other sites More sharing options...
macgirl Posted April 14, 2008 Share Posted April 14, 2008 "I must admit that I find that you are being what you might call just a little picky" Not really, it is beacuse users can be misinformed, and they could say "you say that with speedstep kernel I will get more battery or less heat". Kind of disclaimer you know Link to comment Share on other sites More sharing options...
realityloop Posted April 14, 2008 Share Posted April 14, 2008 Would it be possible to either alter the tree structure like follows: XPS M1330 -GFX --NVidia 8xxx Series --Intel -Sigmatel 9228 -Keyboard Layouts --British --French -2 Finger Scrolling Or add model numbers that patches are applicable to for each item please? Link to comment Share on other sites More sharing options...
sonotone Posted April 14, 2008 Author Share Posted April 14, 2008 Would it be possible to either alter the tree structure like follows: XPS M1330 -GFX --NVidia 8xxx Series --Intel -Sigmatel 9228 -Keyboard Layouts --British --French -2 Finger Scrolling Why not, but actually i don't know how to use the same file in differents tree locations. example: if i make a tree structure like: XPS M1330 - 2 fingers Inspiron 9400 - 2 fingers I need to store files twice, and the outcome is a unecessary heaviness of the package. It's possible using specifics scripts, like to create a temp folder where all files are stored, then, following user choises, to move them in desired folders. But i must to start again from beginning. I don't want include GFx files for now, because it's a advanced and very specific stuff witch can make your system unusable. Or add model numbers that patches are applicable to for each item please? Yes, i will improve informations about that. Hovewer, users should to know their hardware before running that kind of packages. Link to comment Share on other sites More sharing options...
gNOMEintheRedHat Posted April 14, 2008 Share Posted April 14, 2008 Hi, I attach here betaS versionS of an All-In-One metapackage dedicate to Dell laptops (Made with Packagemaker). I project to extend it for all dell laptop series, but i need testers and specific kexts for theses laptops Build 0.2.3: - Add Sigmatel 9205 prepatched kexts. Link: http://rapidshare.com/files/107399889/Dell....O.2.3.zip.html TESTERS: Please give your laptop model (and Hardware), release used, build used and Kernel installed. A step by step installation will be better to report each section problem. Thanks. I have a Dell XPS M1530 nVidia 8600 256MB 320GB HDD HD Audio Blu-Ray Installed Kalyway 10.5.1 ISO I had to move the Apple Power Manager KEXT and the NVDA KEXT to make the system boot. When trying to start the DellPackage.0.2.3 and I get the message "you use an old version Only for Leopard gNOMEintheRedHat Link to comment Share on other sites More sharing options...
fffa Posted April 14, 2008 Share Posted April 14, 2008 Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller <VEN_11AB&DEV_4354> (couldn't find any kext on the forum yet)After editing IONetworkingFamily.kext/Contents/PlugIns/AppleYukon.kext/Contents/Info.plist, the Ethernet was detected!!! Success was short lived - status shows "Ethernet cable not plugged in" regardless of it connected or not Profiler shows ethernet is present complete with IP address, but I couldn't access my router 192.168... so the NIC is still not properly initialized. Is there any possibility that you can develop a driver for Yukon Ethernet? Connection rate by Airport is really slow.... Thanks in tons! Link to comment Share on other sites More sharing options...
kerms Posted April 14, 2008 Share Posted April 14, 2008 Hullo, could you maybe add Dell 1525 to the list? I'm using the (dreaded) GMA X3100 Anyway, here's my config: Install Kalyway 10.5.1, updated to 10.5.2 with Kaly Combo Update GMA X3100, ONLY works on EXTERNAL monitor. 1680 * 1050 * 32. Full QE/CI (total blank on internal monitor. why won't it run on 1440 * 900 when capable of 1680 is beyond me). Already tried natit.kext but didn't work, don't want to use the sleep trick Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller <VEN_11AB&DEV_4354> (couldn't find any kext on the forum yet) After editing IONetworkingFamily.kext/Contents/PlugIns/AppleYukon.kext/Contents/Info.plist, the Ethernet was detected!!! Success was short lived - status shows "Ethernet cable not plugged in" regardless of it connected or not Profiler shows ethernet is present complete with IP address, but I couldn't access my router 192.168... so the NIC is still not properly initialized. Single user mode saved my life many times now, after (really) countless of erase and installs of Leopard, I really loathe GMA X3100 Kalyway 10.5.2 here Dell 1520 bought a dell wireless 1390 card thats recognized as airport most utilities work, x11 does not bolded applies to me above PS: F*ck the x3100 Link to comment Share on other sites More sharing options...
deathcab Posted April 14, 2008 Share Posted April 14, 2008 tried to install on my dell xps m1330, started up in safe mode (for some reason, this is the only mode i can load osx in) and installed the 2 finger scroll and battery package. restarted and upon restart, osx would no longer load. it just gave me the grey apple loading screen and then a circle with a line through it above that after about a minute. had to uninstall and reinstall osx Link to comment Share on other sites More sharing options...
boomboxxsocks Posted April 15, 2008 Share Posted April 15, 2008 Build 0.2.3: - Add Sigmatel 9205 prepatched kexts. Link: http://rapidshare.com/files/107399889/Dell....O.2.3.zip.html TESTERS: Please give your laptop model (and Hardware), release used, build used and Kernel installed. A step by step installation will be better to report each section problem. Thanks. yo i installed the build 0.2.3 on my dell vostro 1700 to see if it would work. i installed sigmatel 9205 first and it didnt work so i installed all the sound kexts. then i also installed the british keyboard, fix disk permission. and neither worked! so now i still have no sound and the an added extra the track pad is not working on my dell vostro 1700. could you please help to fix the track pad and the sound. (the track pad just goes mental when you touch it... and slowly goes up to the top left corner... very annoying) is there going to be an installer made for the Vostro series and not just XPS and inspiration series? hope you can help thanks Boom! Link to comment Share on other sites More sharing options...
sonotone Posted April 15, 2008 Author Share Posted April 15, 2008 When trying to start the DellPackage.0.2.3 and I get the message "you use an old version Only for Leopard Sounds strange, it define minimum target for 10.5.0... Try the 0.2.2b to see if you have the same issue. ried to install on my dell xps m1330, started up in safe mode (for some reason, this is the only mode i can load osx in) and installed the 2 finger scroll and battery package. restarted and upon restart, osx would no longer load. it just gave me the grey apple loading screen and then a circle with a line through it above that after about a minute. had to uninstall and reinstall osx Battery meter is only for 10.5.2 (it's specified into installer). Maybe you ran it with 10.5.1 i installed the build 0.2.3 on my dell vostro 1700 to see if it would work. i installed sigmatel 9205 first and it didnt work so i installed all the sound kexts. then i also installed the british keyboard, fix disk permission. and neither worked! so now i still have no sound and the an added extra the track pad is not working on my dell vostro 1700. could you please help to fix the track pad and the sound. (the track pad just goes mental when you touch it... and slowly goes up to the top left corner... very annoying) is there going to be an installer made for the Vostro series and not just XPS and inspiration series? You have to open "international" to check british keyboard. Vstro users seem's to have issues with 2-fingers. I recommend to visit Ranova thread for furthers informations. Sigmatel 9205 kexts comes from a Vostro 1700 owner, so it's supppose to work with yours, but maybe something goes wrong with installer. Did you saw the sound icon in menu bar? There is a link here to a small package with only sigmatel 9205 kexts, can you try it and give me a report (if it's doesn't works, try to remove AppleHDA.kext and ALCinject.kext (in Extensions folder) before to install. 9205: http://forum.insanelymac.com/index.php?act...st&id=25541 Link to comment Share on other sites More sharing options...
Dreagone Posted April 15, 2008 Share Posted April 15, 2008 Dell XPS m170 Intel pro 2200BG wireless Broadcom 570x gigabit network Dell wireless 350 Bluetooth internal card Sigmatell c-major audio Does any of those work? and how do i get the new drivers into the .ISO? Link to comment Share on other sites More sharing options...
macgirl Posted April 15, 2008 Share Posted April 15, 2008 tried to install on my dell xps m1330, started up in safe mode (for some reason, this is the only mode i can load osx in) and installed the 2 finger scroll and battery package. restarted and upon restart, osx would no longer load. it just gave me the grey apple loading screen and then a circle with a line through it above that after about a minute. had to uninstall and reinstall osx Did you try to boot in Verbose Mode (-v) to watch for errors and warnings? Link to comment Share on other sites More sharing options...
daveman123 Posted April 15, 2008 Share Posted April 15, 2008 Can anyone confirm if the sound and battery installations work for the Kalyway install for dellxps m1530? Link to comment Share on other sites More sharing options...
boomboxxsocks Posted April 16, 2008 Share Posted April 16, 2008 Sounds strange, it define minimum target for 10.5.0... Try the 0.2.2b to see if you have the same issue. Battery meter is only for 10.5.2 (it's specified into installer). Maybe you ran it with 10.5.1You have to open "international" to check british keyboard.Vstro users seem's to have issues with 2-fingers. I recommend to visit Ranova thread for furthers informations. Sigmatel 9205 kexts comes from a Vostro 1700 owner, so it's supppose to work with yours, but maybe something goes wrong with installer. Did you saw the sound icon in menu bar? There is a link here to a small package with only sigmatel 9205 kexts, can you try it and give me a report (if it's doesn't works, try to remove AppleHDA.kext and ALCinject.kext (in Extensions folder) before to install. 9205: http://forum.insanelymac.com/index.php?act...st&id=25541 ok the british keyboard is still checked and still the trackpad is not working? and i dont really want to try Ronava's thread as if it doesnt work i have to use and external keyboard and mose to fix it... seems alot of hassle ;-)no sound card visable? will try this link and get back to you.Boomok the british keyboard is still checked and still the trackpad is not working? and i dont really want to try Ronava's thread as if it doesnt work i have to use and external keyboard and mose to fix it... seems alot of hassle ;-)no sound card visable? will try this link and get back to you.Boomthe sound is now working.... since using the direct installer ;-) thanks.but the track pad is still not working.Boom! Link to comment Share on other sites More sharing options...
pablovbas Posted April 16, 2008 Share Posted April 16, 2008 This will be very useful for a friend of mine.... thanks brother pabs :devil: Link to comment Share on other sites More sharing options...
Recommended Posts