callys Posted May 22, 2008 Share Posted May 22, 2008 Try installing Natit.kext with KextHelper. I did that and restarted it, now it hangs and won't start up, but for some reason it will start in VMWare Link to comment Share on other sites More sharing options...
kristalaz Posted May 22, 2008 Share Posted May 22, 2008 is there anyone who has working osx(with quad extreme) with 2600xt mobile??? Link to comment Share on other sites More sharing options...
parkerlewis Posted May 22, 2008 Share Posted May 22, 2008 2600 PRO users..... Here is my success story... New build. C2Duo 2.4 2mb L2 667 2gb Ram Sata asus dvd Sata Hitachi 7200 160gb HDD Asus P5945GC/MX (in asus barebones 945gc v3) Japanese brand HD 2600 PRO 512mb with the 9589 device ID. Installed the latest Kalyway 10.5.2 package, chose the Natit option in 'customize' options during installation of Leopard. Did nothing else apart from this...... go into your Main Disk, then click SYSTEM, then click LIBRARY, then right click on EXTENSIONS and choose GET INFO.... .....in the pop up box change the permissions to read/write for all users. Now in the EXTENSIONS folder, right click on ATIRADEONX2000.KEXT Then click on CONTENTS, and then right click INFO.PLIST and choose to open with Text Edit. Then change the Device ID with the 9588 in it, to 9589....so basically just change the second '8' to a '9'. Save! (if it does not let you save, you need to recheck those permissions, make sure they are set to read and write...you probably need to click the padlock, and type in your admin password. After this step, close all folders, and open your Main Disk, then APPLICATIONS, then UTILITIES and then DISK UTILITY, and then choose your disk that Leopard is installed on, and click VERIFY PERMISSIONS, and after that, REPAIR PERMISSIONS. Restart and possibly, win. Obviously from the terms I have used, and the simple way I went about it, I am what you would call a newbie. I just wanted to write up what I did without going into terminal, since some beginners get scared by that stuff! Also worth mentioning that I thought I had done the above procedure correctly once or twice, and it did not work. I obviously got something wrong, so if it does not seem to work, I would definitely recommend repeating the process again. I did 3 re-formats/installations using just this method, and must have done something wrong the first 2 times..... VERY HAPPY! PS DRUMTHRASHER!! You seem to know 20 times what I do about all this, and you have not had success.....seriously consider a new card or switching to Intel or something....the 8 months of heartache is just not worth it, right? I was ready to quit trying to get QE today, and just living without Aperture, fancy Leopard graphics etc...and that was only after a week! :0 Link to comment Share on other sites More sharing options...
MacGhosT Posted May 23, 2008 Share Posted May 23, 2008 Here is a fix well partial fix for people having the blue screen on boot with a HD2600 Pro and have a working mouse. (drumtrasher same error you have) Click top left of screen around where the apple normally would be, come down the screen in a straight line aprox 55 mm and click. This should send it of to sleep if you were able to hit the sleep function in the menu. When its asleep mash keyboard. Up it comes with a working screen. If i go to play a game it does same thing gave up on that idea. Im guessing its a AMD problem as googling tends to lean me in that direction. System is Albatron SLi board X2 3800 dual core Saphire HD2600 Pro 2 gig Geil ram 80 gig WD 8139 Lan card Onboard sound Disabled Onboard lan keeps hanging box. Chipset Model: ATI Radeon HD 2600 Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 512 MB Vendor: ATI (0x1002) Device ID: 0x9589 Revision ID: 0x0000 ROM Revision: 113-B1480A-236 EFI Driver Version: 01.00.236 Displays: SyncMaster: Resolution: 1280 x 1024 @ 75 Hz Depth: 32-bit Color Core Image: Hardware Accelerated Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported QuartzGL: Supported Rotation: Supported Display Connector: Status: No display connected Link to comment Share on other sites More sharing options...
drumthrasher109 Posted May 23, 2008 Share Posted May 23, 2008 Here is a fix well partial fix for people having the blue screen on boot with a HD2600 Pro and have a working mouse. (drumtrasher same error you have) Click top left of screen around where the apple normally would be, come down the screen in a straight line aprox 55 mm and click. This should send it of to sleep if you were able to hit the sleep function in the menu. When its asleep mash keyboard. Up it comes with a working screen. If i go to play a game it does same thing gave up on that idea. Im guessing its a AMD problem as googling tends to lean me in that direction. System is Albatron SLi board X2 3800 dual core Saphire HD2600 Pro 2 gig Geil ram 80 gig WD 8139 Lan card Onboard sound Disabled Onboard lan keeps hanging box. Chipset Model: ATI Radeon HD 2600 Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 512 MB Vendor: ATI (0x1002) Device ID: 0x9589 Revision ID: 0x0000 ROM Revision: 113-B1480A-236 EFI Driver Version: 01.00.236 Displays: SyncMaster: Resolution: 1280 x 1024 @ 75 Hz Depth: 32-bit Color Core Image: Hardware Accelerated Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported QuartzGL: Supported Rotation: Supported Display Connector: Status: No display connected Well the thing is now, I tried lastexile's beta 10.5.3 drivers and this time I don't even get my cursor, just a blue screen. The computer doesn't seem to do anything but occasionally the hard drive light will blink for a few seconds. I was never able to make my Leopard install sleep. It takes forever to shutdown/restart. Link to comment Share on other sites More sharing options...
MacGhosT Posted May 24, 2008 Share Posted May 24, 2008 i even managed to get dual screen working with QE/IC etc all working Lexmark W820 printer working Lexmark C910 Colour printer working Mythtv Frontend ATI Radeon HD 2600 XT: Chipset Model: ATI Radeon HD 2600 Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 512 MB Vendor: ATI (0x1002) Device ID: 0x9589 Revision ID: 0x0000 ROM Revision: 113-B1480A-236 EFI Driver Version: 01.00.236 Displays: SyncMaster: Resolution: 1280 x 1024 @ 75 Hz Depth: 32-bit Color Core Image: Hardware Accelerated Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported QuartzGL: Supported Rotation: Supported SyncMaster: Resolution: 1280 x 1024 @ 75 Hz Depth: 32-bit Color Core Image: Hardware Accelerated Mirror: Off Online: Yes Quartz Extreme: Supported QuartzGL: Supported Rotation: Supported Link to comment Share on other sites More sharing options...
drumthrasher109 Posted May 24, 2008 Share Posted May 24, 2008 Wow I guess i'm just screwed for good then... Link to comment Share on other sites More sharing options...
Ayce Posted May 25, 2008 Share Posted May 25, 2008 I got it! I just tried the 2600 installer, clicked the triakis.pkg, and reboot. Have both monitors running fine, but needed a tweak as they were set up backwards. At first I thought I was screwed, as it seemed to get stuck at the end of the text before booting, but as soon as I turned on the second monitor, everything lit up. Reset montior positions so my main is on the left. I only have 3 resolutions, but that's fine, 'cause I use 1024x768 anyway. Now, if I can just get the sound working. Link to comment Share on other sites More sharing options...
Tobbz Posted May 26, 2008 Share Posted May 26, 2008 Has anybody gotten their HD 2400XT to work? (Must be devid: 0x94c11002) I've installed Kalyway 10.5.2, and the card works with the "vesa" drivers.. You know, when it says 'No kext loaded'. But i can't get 1680x1050 or CI/QE support. I've tried to install the Natit drivers from netkas, and then added my devid to the info.plist of ATIRadeonX2000.kext, but when i do that, my screen goes haywire with stripes and dots. I tried the triakis.pkg too, but it gives me the same problem. I've seen a lot/some people with 0x94c3 devids getting CI/QE and different res to work.. But i haven't found anybody with a working 0x94c1 yet. So, anybody out there with a HD 2400 XT (devid 0x94c1) that is working? Help me out. TIA Best Regards, Link to comment Share on other sites More sharing options...
zoikarios Posted May 26, 2008 Share Posted May 26, 2008 Hello guys I have kallyway 10.5.2 on s939 X2 4200+ with Giga-byte GA-8KN9F-9 2GB ram it's realy fast...but I have a big problem.I put Asus 3450 and it is recognize but I have 17'' monitor and the resolution its only 1024*768.Drivers i don't put from the DVD because the system was crashing.......please any help!!!! I trye to put from 3870 put nothig. Link to comment Share on other sites More sharing options...
Silven Posted May 27, 2008 Share Posted May 27, 2008 i was wondering how the 3870x2 performs with this driver... osx doesn't support multiple gpu's right? so only one gpu is utilized? Link to comment Share on other sites More sharing options...
Catharsis Posted May 27, 2008 Share Posted May 27, 2008 Maybe I'm an idiot, but how do I find the PCI ID of my card, and then where exactly in info.plist would I add it? I have a 3850 HD. Link to comment Share on other sites More sharing options...
m16 Posted May 29, 2008 Share Posted May 29, 2008 Thanks man now I don't need to deal with intel integrated thanks to my fancy radeon 2600XT! Link to comment Share on other sites More sharing options...
Sir Lyoshyk Posted May 29, 2008 Share Posted May 29, 2008 Hello everybody! I have some problem... First of all i want to thanks for this guide... It help for me.. Now I have full resolution... But... My Video card works very slow... Even screensaver Flurry have lags... I have Core2Quad Q6600 2 Gb RAM Abit IP35-E and ATI HD2600 PRO ASUS.... What's wrong? Link to comment Share on other sites More sharing options...
LowRadiation Posted May 29, 2008 Share Posted May 29, 2008 is there anyone who has working leo with mobile radeon HD2600? Link to comment Share on other sites More sharing options...
Hal-odyssey Posted May 29, 2008 Share Posted May 29, 2008 is there anyone who has working leo with mobile radeon HD2600? LowRadiation , im having the same problem with a mobile radeon HD2600,ihave try 10.5.1 - kalyway 10.5.2 and drivers from leo4all ati2600-pcie and nothing happent.My device id: 0x9581x1002 Link to comment Share on other sites More sharing options...
redblur94 Posted May 30, 2008 Share Posted May 30, 2008 Hello All, Could someone be so kind as to possibly explain why after installing the netkas kext or the triakis.pkg (using both Leo4Allv3 and zephyroth 10.5.2) I still cannot see the ATIRadeonX2000.kext file in \extensions? Has anyone had a similar problem? I'm running AMD Athlon 4000+ w/ ATI 2400HD (0x94c3) and have tried unsuccessfully to install the Leopard Graphics Update thinking that may help me see the ATIRadeonX2000.kext file. Just not sure why I cannot see the darn file after installing the kexts. Thanks... Link to comment Share on other sites More sharing options...
drumthrasher109 Posted May 30, 2008 Share Posted May 30, 2008 EVERYONE! GO HERE FOR EASY INSTALLERS FOR MOST CARDS! http://forum.insanelymac.com/index.php?showtopic=107526 Link to comment Share on other sites More sharing options...
Sir Lyoshyk Posted June 2, 2008 Share Posted June 2, 2008 WOW!!! SUPER!!! ALL OK! Even transparent bar!!!!! Link to comment Share on other sites More sharing options...
Sir Lyoshyk Posted June 3, 2008 Share Posted June 3, 2008 Why loader show only 16 Mb VideoRAM??? Link to comment Share on other sites More sharing options...
mcsmart Posted June 3, 2008 Author Share Posted June 3, 2008 Why loader show only 16 Mb VideoRAM??? Because it is stupid! You don't have to care about the loader, the OS does not really care what the loader says. When system profiler reports 512MB GRAM then you have 512 Link to comment Share on other sites More sharing options...
Sir Lyoshyk Posted June 3, 2008 Share Posted June 3, 2008 Fuf...... So... Let's fun... Tnx... Link to comment Share on other sites More sharing options...
Erño Posted June 9, 2008 Share Posted June 9, 2008 Does the 3870/3850 drivers work with Apple's Mac Pro? I was thinking of buying one after this summer, but I don't have money for apple's graphic card updates, so... Allso I'd like to know if PNY GeForce 8800GT would work in a real MP. What does it take to get them working, if its possible in the first place? Link to comment Share on other sites More sharing options...
alphaville_x Posted June 12, 2008 Share Posted June 12, 2008 Hi all, Did anybody get TV-out/S-video output on 3850 to work? I have Sapphire HD3850 512Mb and Kalyway 10.5.2, everything works perfect except S-video. That's not crytical because I have AverKey RGB-to-composite/s-video/component converter, but the native s-video output gives better quality and it would be great to make it working. Link to comment Share on other sites More sharing options...
gaike Posted June 15, 2008 Share Posted June 15, 2008 Hi, How about Ati HD3200 (0x96101002)? Link to comment Share on other sites More sharing options...
Recommended Posts