Leo4All-10.5.2 Universal AMD/INTEL[SSE2/SSE3]

[footsie77]

hi eddie!

...have u found a solution why my internal hard disk are not recognized when choosing volume to install leo4all?

..thanks in advance!

[morkus]

No go on install, I hear the clack of my 500gig trying to engage, whilst the Still Waiting For Root Device" msg reappears.... hmmm... ok it works in mbr but not GUID....and even that is erratic... think its time to ditch this board.

 

Anyone got any good suggestions for a decent mobo that will hackintosh and support the AMD 4800+ ?

 

 

Mork

[eddie11c]

Ok I am not sure I remember your Device ID's Footsie, I have been real busy trying to get some other things working.

 

For fun I made an "About this Mac" installer. With this option selected it will detect your CPU and put it in for you! Yes finally someone has bothered to add some support to avoid manually having to edit it! For now only English is supported sorry!

[cloudpjff7]

Ok I am not sure I remember your Device ID's Footsie, I have been real busy trying to get some other things working.

 

For fun I made an "About this Mac" installer. With this option selected it will detect your CPU and put it in for you! Yes finally someone has bothered to add some support to avoid manually having to edit it! For now only English is supported sorry!

That sounds pretty cool. Can't wait to get my hands on a copy! Sounds pretty interesting to me, makes it simpler for the noobs. Good luck on the rest of your to-do list.

[ludacrisvp]

I am still working on that among other things. A few things to note from my experience with latest build on my AMD machine.Here is a screenshot for reference.

 

Eddie - I see in your pic of the terminal that you are still on the 9.2.0 kernel.

I was wondering if you will have the AMD version of the 9.2.2 kernel in this install?

Since you are including the 9.2.2 Intel (vanilla) kernel.

The AMD 9.2.2 Kernel is floating about somewhere.

[Mamas]

eddie, damnit. Can you answer my quetion??

[chickkun]

kotoeri kana-kanji conversions are not working due to a missing set of kotoeri dictionary files in the path:

 

/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/LangAnalysis.framework/Versions/A/Support/

 

If you look at a functioning 10.5.2 system on a Mac with Japanese installed, there is 68.7 MB (71,804,158 bytes of files for 24 items mainly kotoeri dictionaries) in this folder. Copy them across to your hackintosh in the above path, repair permissions and reboot and kotoeri kana-kanji conversions will work.

 

Would anyone be so kind as to make these files available somehow?

 

I have Leo4allv2 mostly working on my Dell Inspiron 531.

I'd really like to get this japanese kanji conversion working though.

It *almost* works, in that I can input hiragana and then press spacebar to get the kanji, but pressing enter doesn't finish the kanji conversion (it just sits there, and I can't type any further). If I click away with the mouse and wait about 5 seconds, the kanji sticks, but that's a mightly slow way to type in your kanji!

[Bobshowz]

Hie there eddie ..

 

I had downloaded Leo4All - 10.5.2 sucessfully and burned the file in low speed.. and whenever i boot the cd i get this error .. by the way i am using AMD

 

Attachment included..

 

http://www.indiannet.net/error.png

 

After that i played around with my bios settings .. i disabled my ACPI ... but now the yellow thing is gone but still stuck at a different phase..

 

New Attachment

 

http://www.indiannet.net/error2.png

 

Any help would be really appreciated..

 

Thanks in advance for this release..

 

----------------------------------------------------------------------------------------------

 

Machine Model: AMD

Processor Name: AMD Athlon 64 Processor 3000+

Processor Speed: 2 GHz

Total Number Of Cores: 1

L2 Cache (per processor): 512 KB

Processor Features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP

MTRR PGE MCA CMOV PAT PSE36

CLFSH MMX FXSR SSE SSE2

Memory: 1 GB

Bus Speed: 800 MHz

[WicKeDcHilD]

eddie i was just wondering if there will compatibility with my system for your new release?

 

Motherboard: Asus M3A32-MVP Deluxe WiFi

Bios: v1002

Chipset: ATI RD790

SouthBridge: ATI SB600

CPU: AMD Phenom BE 9600

Ram: OCZ XTC Platinum OCZ2P8002G 2X2gb

Graphix: ATI Radeon HD 3870 ( crossfire )

Harddrive: 320gb Seagate Barracuda ( ST3320620AS )

[a2000rick]

My Dell Inspiron 1520 gets stuck trying to boot the install DVD.

 

This is the last thing I see with every kernel option (Kalyway 10.5.2 and Leo4Allv2 10.5.2)

 

MAC Framework successfully initialized

using 16384 buffer headers and 4096 cluster IO buffer headers

IOAPIC: Version 0x20 Vectors 0:23

[]

 

uses GM 965, nVidia 8600M, Core2Duo, 4GB RAM.

 

iATKOSv2 10.5.1 boots up but it's only 10.5.1

 

Anyone have any suggestions?

[venusk]

Wowww thanks eddie for your great release, I installed Leo4All last night and it is working right away. I have couple of question because my wireless card and audio are not working.

 

1. Wireless card is WG311T from netgear with Atheros chip.

2. Realtek HD audio built-in on Intel 915PBL chipset.

 

Is their anybody else found same problem. I am downloading Leo4AllV2 right now and will install once is done.

But Eddie i saw one other issue, when i tried to start Leo without -v it just hangs at blue screen on boot.

[chickkun]

kotoeri kana-kanji conversions are not working due to a missing set of kotoeri dictionary files in the path:

 

/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/LangAnalysis.framework/Versions/A/Support/

 

If you look at a functioning 10.5.2 system on a Mac with Japanese installed, there is 68.7 MB (71,804,158 bytes of files for 24 items mainly kotoeri dictionaries) in this folder. Copy them across to your hackintosh in the above path, repair permissions and reboot and kotoeri kana-kanji conversions will work.

I'm missing 7 files worth a total of 606,217 bytes in this directory.

To get Japanese input working on my Leo4allv2 install, does anyone have these items available, or know how to get them off an install DVD (any of Leo4allv2, Zephyroth, etc.)?

 

I've attached a picture showing the items in my directory.

[collac]

I'm experiencing the same issue as Zippea. I can not boot into the installer no matter what boot options I try.

 

To try to debug this I wanted to read the last four lines of output that come after loading extensions.mkext that are being displayed for only a fraction of a second before the reboot. So I set up my SLR to take some rapid fire shots and after a few attempts I got it.

 

 

Zip, are these four lines displayed for you also (even though they are very difficult to read because they disappear so quick)?

 

It looks like a problem of interaction between EFI and the BIOS on my Thinkpad T42 (spec).

 

q. Am I correct to assume that "EFI build: ToH" means PC_EFI?

q. What version of PC_EFI is being used hear?

q. Is the inclusion of the PC_EFI bootloader for the installer something that is peculiar to Leo4All? I have been able to boot into the installer for most other releases (like Kalyway 10.5.1 and JaS 10.4.8).

 

Thanks for any input.

 

coffeevictim

 

 

I have the same problem with my old Pentium4-M laptop. Although I can get no Leopard releases to work on it. I have been trying to figure out the cause, if I do I will report back. I am unable to tell if its ACPI related or kernel related. I am leaning to kernel related though.

Hi Eddie11c, any findings about this? I've the same problem with vanilla kernel. My system config, just in case:

 

Pentium Core 2 Duo 3Gh.

Mother ASUS P5PL2 (chipset intel ich7) (no execute bit, ACPI and APIC enabled in BIOS)

4GB RAM DDR2 667

SATA HD

NVIDIA 6500 256MB

Realtek 8168/8111

 

If I install netkas kernel, ALL is ok.

[eddie11c]

I'm missing 7 files worth a total of 606,217 bytes in this directory.

To get Japanese input working on my Leo4allv2 install, does anyone have these items available, or know how to get them off an install DVD (any of Leo4allv2, Zephyroth, etc.)?

 

I've attached a picture showing the items in my directory.

Try installing AsianLanguagesSupport.pkg from the DVD(May need to use pacifist to install manually), this should be fixed as my latest install has 17 items for 68.7Mb

[chickyd]

Is there a filefactory.com release of this leo4all?

 

If there is would someone mind PMing the link(s) to me so I can get going with a fast download?!

 

Thanks!!..

[feldmaresciallo]

Hello, i am trying to use different smbios kexts to fix the "about this mac" crashing my finder ( even in the v2 release ).

I can't substitute the existing one because it says that i have no rights to do it.

Also when i try to repair permissions on the disk it says that every issue found couldn't be repaired.

Is there a way to gain permissions? I am logged in as administrator so i can't understand why.

Thanks for every suggestion.

[remko]

every time i try to install leopard the installation stops at this screen

 

 

 

 

and returns directly to this again

 

 

 

 

i've tried kali and leo4all universal but is still have the same problem

 

I have a pavillion dv6256eu notebook

 

 

cpu : AMD Turion TL-50

GPU : geforce 7200 go

ram : 4 gb ddr2

disk : 160 gb with two partitions ( c: vista and d: HP recovery)

OS : vista premium Dutch version

 

 

i'm a noob at this so if someone could help me in details. thanks

[chickkun]

Try installing AsianLanguagesSupport.pkg from the DVD(May need to use pacifist to install manually), this should be fixed as my latest install has 17 items for 68.7Mb

Thanks for the tip eddie. I'll try.

My installation is from the Leo4allv2 DVD, and do have 17 items in the directory, however, only for 68.1Mb on my hard drirve.

According to nekton, there's supposed to be 24 items for 68.7Mb.

Will be my first go with pacifist, so wich me luck...

[NixGaL]

My Mouse Goes Mad like berserk, it mostly happens when i am working in Adobe CS3 any application? does anyone else have this problem, i have tried both ps2/usb mouse, they both seem to have this problem. the problem gets resolved after rebooting, i guess mouse kext have some issues?? any solution suggested ?????

[kaworu nagisa]

Sorry guys, neither of you posted your actual Device ID's so I am unable to give any assistance. They should look something like this: VENDOR_XXXX&DEVICE_XXXX. If your in windows you open up Device Manager and click your controller. Click the details button of that controller and scroll to Hardware ID's.

 

PCI\VEN_1002&DEV_71C3&SUBSYS_01AC1043&REV_9E

PCI\VEN_1002&DEV_71C3&SUBSYS_01AC1043

PCI\VEN_1002&DEV_71C3&CC_030000

PCI\VEN_1002&DEV_71C3&CC_0300

 

Here... hope that u can include support; i have various problems with that GPU - only package created by MacMan2007 (under ToH 10.5 updated from JaS 10.4.8) enables QE and CI

[venusk]

I installed Leo4All. Everything went fine but when i hit enter without typing -v after installation it hangs at blue screen.And when i type -v and everything works fine except my wireless keyboard. and with only -x(safe boot) keyboard works but my wireless card do not work do not. Is their someone saw same kind of issue. Please help...I installed Leo4All. Everything went fine but when i hit enter without typing -v after installation it hangs at blue screen.And when i type -v and everything works fine except my wireless keyboard. and with only -x(safe boot) keyboard works but my wireless card do not work do not. Is their someone saw same kind of issue. Please help...

[eddie11c]

PCI\VEN_1002&DEV_71C3&SUBSYS_01AC1043&REV_9E

PCI\VEN_1002&DEV_71C3&SUBSYS_01AC1043

PCI\VEN_1002&DEV_71C3&CC_030000

PCI\VEN_1002&DEV_71C3&CC_0300

 

Here... hope that u can include support; i have various problems with that GPU - only package created by MacMan2007 (under ToH 10.5 updated from JaS 10.4.8) enables QE and CI

 

This is for an ATI X1600?

[jake123]

EddieC, when do you think R3 will be out, can you give a time frame?

 

Thanks

[mcdonald]

Atheros AR5006EG Wireless PCI Express Adapter (802.11b/g). Please help me set up my wifi, eddie11c

[eddie11c]

I think you need the old IO80211.kext from Tiger to get it working. I have included this with the next update, I am not sure when it will be ready yet. There are a few more things I need to work on still.