Leo4All-10.5.2 Universal AMD/INTEL[SSE2/SSE3]

[eddie11c]

I redid my Nvidia drivers myself including all the Device ID's I could find. These should work for many, if you scroll back a few pages you will see all the ones I had at that point. If yours is not there you still have time to post them to get it included. The only new one I have added since was 0x040710de.

[jake123]

I redid my Nvidia drivers myself including all the Device ID's I could find. These should work for many, if you scroll back a few pages you will see all the ones I had at that point. If yours is not there you still have time to post them to get it included. The only new one I have added since was 0x040710de.

Waiting patiently for your r3.. my school laptop is waiting with an empty hard drive for it .. Besides adding the PS2 fix and battery monitor, can you add some OS X updates? like the airport update so we dont have to deal with replacing the kernel?... and its not a big deal at ALL, but transmission has a newer version out... but i think they do weekly updates

[vijayagarwal]

Hi eddie,

My installation for leo4allv2 went gr8..i choose the amd fix and the nvidia drivers /2/3/4/5 as my chipset is nforce NVidia520 and i have a SATA hdd..pleaase advice as i cant get past still waiting for root device...

 

My device id is

 

PCI\VEN_10DE&DEV_0448&SUBSYS_30CF103C&REV_A1

PCI\VEN_10DE&DEV_0448&SUBSYS_30CF103C

PCI\VEN_10DE&DEV_0448&CC_01018A

PCI\VEN_10DE&DEV_0448&CC_0101

 

thanks..

[eddie11c]

That ID is in both versions of AppleNforceATA. Make sure you only checked one, try choosing the NforceTest version and not the other as thats what is used on the DVD to boot.

[almedmat]

Waiting patiently for your r3.. my school laptop is waiting with an empty hard drive for it .. Besides adding the PS2 fix and battery monitor, can you add some OS X updates? like the airport update so we dont have to deal with replacing the kernel?... and its not a big deal at ALL, but transmission has a newer version out... but i think they do weekly updates

Yeah, transmission updates every week, just check iusethis. BTW: I have a 50 gig partition waiting for you too. Keep up the good work. Adding id's sounds like boring work but...

[kurenai]

What I would like from some people that have leopard installed, could you please run this command from terminal and post the results.

 

sysctl -n machdep.cpu.brand_string

 

on Dell Vostro 1500

Intel® Core™2 Duo CPU T8100 @ 2.10GHz

(ironically, About This Mac shows "2.2 GHz Unknown")

 

on Dell Vostro 400

Intel® Core2 Duo CPU E6750 @ 2.66GHz

(this shows up in About This Mac as "2.67 GHz Intel Core 2 Duo")

[Unkwntech]

What I would like from some people that have leopard installed, could you please run this command from terminal and post the results.

 

sysctl -n machdep.cpu.brand_string

 

AMD Athlon 64 X2 Dual Core Processor 4200+

 

Which is correct.

[vijayagarwal]

That ID is in both versions of AppleNforceATA. Make sure you only checked one, try choosing the NforceTest version and not the other as thats what is used on the DVD to boot.

 

Hi eddie,

I tried that now but still it is stuck with the still waiting for root device.

exactly what i get is ,

AppleNForce ATA : phy connection failed status = 0xe7229f83

AppleNForce ATA : phy connection failed status = 0x00000000

still waiting for root device......

 

I even get the above error when installing but still i get to the install page and installs successfully..

 

Any suggestions..

Thanks.

[Morpheus Phreak]

eddie11c, I made a post in the PPF2 thread, but it seems you visit this one more often.

 

ATi has updated their HD3850 cards with a new BIOS that doesn't work with any available drivers right now.

 

Basically when booting OS X dumps the GPU BIOS image and then the boot process just seems to stop. With older BIOS for these cards the HD3850's work, but without proper fan speeds to keep the temps below critical levels they become unstable.

 

I've posted the BIOS for both the Vanilla BuiltByATi cards in both the non-branded ATi & the VisionTek branded varities at the netkas forums.

 

http://forum.netkas.org/index.php/topic,19...74.html#msg1774

 

Those are the files dumped straight from my card. Hopefully these will help with creating a newer version of the driver to be included in your v3 release

[Magicum]

== SOME UPDATE regarding ATI S450 IDE Controller ==

 

I've made some test. Below are results

 

1. Using AppleGenericPCATA.kext (I've taken this kext from some tiger threads whre guys improved ATA issues):

HDD works slowly, but continuously, without gaps, pauses, only slow. Similar to inactivated DMA mode.

 

2. Using AppleOnboardPCATA or AppleVIAATA:

Read\write operations are fast as should be, however there are a lot of long pauses between processing data portions. That's why using both 1. and 2. produces the same result: ~3 hours installation takes, 15-30 minutes for boot, 10-15 minutes for shutdown.

 

Still need any help. And new idea, possibly this caused not by IDE Controller, but some other device?

[jasonu]

Hey Eddie,

Crossing my fingers didn't work...

I had errors coming with the leo4all disk.

SAM Multimedia: READ or WRITE failed. Sense_KEY = numbers.... repeat repeat repaet.

Figured it was the disk, so burnt a second... same thing. ..

 

Then tried the orignal download iatkos v1.

It worked! But then on reboot (after successful install) i got a message popup... You need to restart your computer.

 

So i am in that loop now, looking for answers.... Any ideas? About the Leo4All errors or the other.

Thanks again

Jason

 

Hey Eddie,

Was a crappy dvd burn. I am writing this from the otherside... i'm in leopard. holy {censored}!! It's a whole new world. A beautiful one.

Thanks so much for you insights, and of course all the time you have put into this!!! Cheers

[Software Updater]

Ok here are my specs.

 

HP DV9008NR

AMD Turion 64x2 Mobile TL-50

1 GB of RAM

GeForce Go 6150 Built-In Video Card

SATA 100 GB HDD

 

 

I was wondering if

 

a) Can it install to SATA

Can I get the max res of 1440x900x32 with this release because any other time I try it crashes when it tries to open the login window.

[eddie11c]

Whats the device ID of that 6150? I can make sure its there, but with the integrated card I have no idea on performance.

[venusk]

Hi Eddie,

 

I tried to install IATKOS 10.5.1 on my PC, but no success, so i am now tired installing it anymore without asking question here. Below is configuration of my PC:

 

Processor: Intel P4 3.4GHz

Motherboard: Intel® 915P

Graphics Card: NVidia 8400GS

Harddrives: Total of 3 harddrives:

1. SATA - Vista Installed(Boot manager)

2. PATA - XP installed

3. SATA - For OS X Leopard(trying to install)

Lan: Onboard for Wired

Wireless: WG311T from Netgear

 

Can you please help if Leo4All will work on my machine?

 

 

I am expecting help from all you here, I saw lot of genius people here, Please help

 

Thanks

[reruns]

Hi any news on the EFI problem that reboots the machine when trying to install DVD?

That is my main problem with Leo4all.

 

Thks

[eddie11c]

I am still working on that among other things. A few things to note from my experience with latest build on my AMD machine.Here is a screenshot for reference.

 

Xterm works however there is a trick that dates back some time. After the first run, when you close it you will notice the process jumps to almost %100 cpu activity.To fix this you will need to open terminal and type:

xeyes &

Then reboot your machine and it should work without issue ever again. Not sure why this happens, it sometimes happens on my Intel the first time its run too, but always on the AMD.

 

As you can see from the screenshot there are 2 SUID files left, I can't seem to get rid of them, this only happens on AMD's(I believe because one of the OSInstall scripts crash on AMD's) but I am not going to worry about it. Everything else runs just as expected to include the autopatching, you no longer need to select AMD-System-Fix. The new Nvidia drivers work fine with both my Nvidia cards(8800GTS 512 and 7800GTX) with 0.2.1 NVinject.

 

EDIT--Almost forgot I did update the programs included. I added a few and updated the versions of a couple also. I would love to add more programs like what people suggest, but there just isn't enough room on a single layer DVD for it. The issue for me of going to dual layer is speed. It would be noticeably slower to install.

 

I have added some network drivers, all that is left is updating the ATI video drivers. I removed repair permissions completely from the install, it is no longer needed to have a functioning install. You will be free to run it once your inside Leopard if you like(there will be lots of stuff to change write permissions on, but nothing to keep Leopard from booting properly). This install now runs about 20 minutes for my AMD machine which has a cheap DVD and slow IDE hard drive. I expect it to be a bit snappier on proper hardware!

[ponduz]

Thanks for a SUPERB Leopard disc! I have installed it on both my Intel and AMD machine. Everything works as it should, at least so far! The only problem I have is on my AMD machine. For some odd reason I can't run the Diablo 2 installer app for osx (ppc emulation afaik), but that's not a big deal.

 

Intel Machine

Motherboard: Gigabyte P31-DS3L CPU: Intel E2160 Memory: 4x1GB GeIL DDR2-6400 Graphics: GeForce 7300 256MB PCI-E HDD: 1xSeagate 200GB (PATA), 2xSamsung 500GB (SATA)(Software Raid stripe) Display: BenQ 20" @ 1680x1050 OSX: 10.5.2 Leo4Allv2. Audio & Network 100%

 

AMD Machine

Motherboard: MSI Neo2 s939 CPU: AMD64 X2 4200+ Memory: 4x512MB GeIL DDR-3200 Graphics: GeForce 6600GT 128MB AGP HDD: 1xSeagate 250GB, 1xSamsung 250GB, 1xSeagate 160GB (All PATA) Display: BenQ 19" @ 1280x1024 + BenQ 20" @ 1680x1050 OSX: 10.5.2 Leo4Allv2. Audio & Network 100%

 

The only thing that didn't work out of the box was dual head on the 6000GT, but I downloaded a small patch from the forum and voila! Gonna try out with my Radeon x1950 in the AMD next week.

[Mamas]

Eddie11c: Does it have to be so many errors in console? A lots of them! Like that one:

Console[136] _CFGetUUIDSTRING: unable to determine UUID for host. Error: 35

 

And its the same error no matter what i do. Open firefox or smth.

[jasonu]

Hey Eddie,

Was a crappy dvd burn. I am writing this from the otherside... i'm in leopard. holy {censored}!! It's a whole new world. A beautiful one.

Thanks so much for you insights, and of course all the time you have put into this!!! Cheers

 

 

Ok, everything is working well. Only a couple of things to sort out.

About this mac works on my machine.

mobo a8n-e asus AMD 64 3200+ 7300 geforce 256mb 1gb ram.

 

ISSUES.

a) i can't start without the cd in the tray. error: Hfs+ Partition error.

not very stable. it froze a few times last night, for unknown reasons.

 

I did search around re: stability and seems it's a bit hit and miss. The cd in tray is common, but i haven't been able to figure out a fix. Any leads would be much appreciated.

 

p.s. Parallels is awesome!! Best of both worlds.

[cnibak]

thanks to eddie11 i installed leo4all 10.5.2 but then when it boots up i see the welcome screen then it says your keyboard blah blah .then i chose UK british and then it says do you want mac to transfer any files and it gives me few options

 

1)from other mac

2)from other partition.....

3)time machine

4)don't transfer any files

 

i check the 4th option and then it gives me the welcome screen again and whatever i do it just gives me the welcome screen and then the keyboard s**t

 

i'm sure someone has allready encountered this problem so please help me

 

Hey RogerFederer,

 

Have you fix this? I have the same problem as yours. Can you please tell me how did you fix it?

 

For those member's who know how to fix this please advised and i will appreciate it.

 

Thanks!

 

EDIT: Ok folks forget about this i found the solution by going here http://osx86leo4all.wikidot.com/known-issues#toc5

 

Thanks eddie11c

[sambo60]

No matter what I try, I get an error that my media is damaged. The md5 matched, I have tried burning fast and slow, different dvd brands, disconnecting all other drives and devices, disabling usb etc. Tiger worked on this computer but leopard won't. Zephyroth's AMD dvd gives me the same error. Does anyone have any advice?? System is: AMD x2 4800+, 1gb ram, 7800gtx, nforce4, sata hard drive. Thanks!

[morkus]

gOT LEO4ALL working great on an Intel dual 3GhZ cpu platfrom, GA-G31M-S2L, now tryin it on an AMD 4800+, DFI LanParty RDX200 CF mobo, and it installs after a few hours, but then there's problems getting these working;-

 

1. Marvell Yukon 88E8053 PCI-E Gigabit - Ven ID: 11AB device id: 4362

 

2. Marvell Yukon 88E8001/80003/8010 PCi Gigabit Ethernet - Ven ID: 11AB device id: 4320

 

3. Saphire ati radeon HD3600 series: 3650 Ven ID: 1002 device id: 9598

4. HD Sound ATI: VEN ID: 1002 DEV: AA01

 

Realtek Audio: ven: 10EC dev: 0882

 

 

Both LAN cards dont work out of box.

The graphics adapter is seeing just the default ATI driver vanilla at 1024x768.

tried Natit.kext and 3870x2 drivers - failed. Awaiting Natit's 3650 rip from the 10.5.3 Leop release...?

 

 

Hard drive problems on PATA install. One drive is windows XP 300gig, the other is mbr 500gig for MAC, both are seen as 128gig drives only!?

Now trying a GUID install on 500gig to see how that fairs.

 

Should it take around 2 hours (calculated) for install - ie - is that normal - I keep seeing people getting very quick installs here... maybe its my Philips 16 speed DVD... MFt test is ok.... ?

 

eddie, thanx for a gr8 release, best one ive tried. Lets hope I can get all these devices working/.. looking forward to your v3 soon :-)

 

 

 

 

 

Mork

[eddie11c]

gOT LEO4ALL working great on an Intel dual 3GhZ cpu platfrom, GA-G31M-S2L, now tryin it on an AMD 4800+, DFI LanParty RDX200 CF mobo, and it installs after a few hours, but then there's problems getting these working;-

 

1. Marvell Yukon 88E8053 PCI-E Gigabit - Ven ID: 11AB device id: 4362

 

2. Marvell Yukon 88E8001/80003/8010 PCi Gigabit Ethernet - Ven ID: 11AB device id: 4320

 

3. Saphire ati radeon HD3600 series: 3650 Ven ID: 1002 device id: 9598

4. HD Sound ATI: VEN ID: 1002 DEV: AA01

 

Realtek Audio: ven: 10EC dev: 0882

Both LAN cards dont work out of box.

The graphics adapter is seeing just the default ATI driver vanilla at 1024x768.

tried Natit.kext and 3870x2 drivers - failed. Awaiting Natit's 3650 rip from the 10.5.3 Leop release...?

Hard drive problems on PATA install. One drive is windows XP 300gig, the other is mbr 500gig for MAC, both are seen as 128gig drives only!?

Now trying a GUID install on 500gig to see how that fairs.

 

Should it take around 2 hours (calculated) for install - ie - is that normal - I keep seeing people getting very quick installs here... maybe its my Philips 16 speed DVD... MFt test is ok.... ?

 

eddie, thanx for a gr8 release, best one ive tried. Lets hope I can get all these devices working/.. looking forward to your v3 soon :-)

Mork

Do you have an option for Native Mode under SATA/IDE settings? I have noticed this on my own computers if I change that setting, it only recognizes the 128gig and seems to take longer to install. On a slower DVD and disk drive it takes on average 35 minutes, as this is what my AMD currently has. With my improved install setup thats down to 20.

[vijayagarwal]

Hi eddie,

I tried NForceTest but still it is stuck with the still waiting for root device.

exactly what i get is ,

AppleNForce ATA : phy connection failed status = 0xe7229f83

AppleNForce ATA : phy connection failed status = 0x00000000

still waiting for root device......

 

I even get the above error when installing but still i get to the install page and installs successfully..

 

Any suggestions

[morkus]

Hi Eddie;

Can't see any BIOS settings to set it NATIVE or NOT. All it states is;-

The On South Chip settings in BIOS only allow settings for the following;-

IDE DMA Transfer Accessoff/on

Primary IDE and Secondary IDEenable or disable the primary and secondary IDE controller. Primary Master/Slave PIO and Secondary Master/Slave PIOPIO means Programmed Input/Output. Rather than have the BIOS issue a series of commands to effect a transfer to or from the disk drive, PIO allows the BIOS to tell the controller what it wants and then let the controller and the CPU perform the complete task by themselves. Your system supports five modes, 0 (default) to 4, which primarily differ in timing. When Auto is selected, the BIOS will select the best available mode after checking your drive.Auto The BIOS will automatically set the system according to your hard disk drive’s timing.Mode 0-4 You can select a mode that matches your hard disk drive’s timing. Caution: Do not use the wrong setting or you will have drive errors.

Primary Master/Slave UDMA and Secondary Master/Slave UDMAThese fields allow you to set the Ultra DMA in use. When Auto is selected, the BIOS will select the best available option after checking your hard drive or CD-ROM.Auto The BIOS will automatically detect the settings for you. Disabled The BIOS will not detect these categories.

IDE Prefetch ModeThis allows data and addresses to be stored in the internal buffer of the chip, thus reducing access time. Enable this field to achieve better performance

IDE HDD Block ModeEnabled The IDE HDD uses the block mode. The system BIOS will check the hard disk drive for the maximum block size the system can transfer. The block size will depend on the type of hard disk drive. Disabled The IDE HDD uses the standard mode.

All my settings in BIOS for the above are set to AUTO... maybe there is another way of getting round this.

BTW: the slow DVD install is probably cus Im using an external USB drive to install from, and it probably on a USB v1 speed settin though I can't confirm that.

All the best,

Mork

Oh, and I forgot to mention, Ive switched off my two SATA controllers for this mobo as I'm not using them.... fresh GUID install is still going on...MorkPSS: when I'm installing the LEO4ALL, I do notice something about ATA going to IRQ 14, yet BIOS has these set to different IRQs from a Windows XP installation on the other drive...? what does this mean?