Leo4All-10.5.2 Universal AMD/INTEL[SSE2/SSE3]

[Raphael754]

Yeah I succesfully installed this on my amd computer....but I need a assistance getting my wusb54g wirless adapter to work with leo. I also have a built in wifi adapter but I would appreciate help with my wusb54g thanks.

[Mamas]

I read that in new Kalyway's release there are some ICH9 support by DUNE. Will there be that support in your new release eddie11c?

[eddie11c]

I think I got the PS2 problem taken care of already, it depends what version of ACPIPlatform you are using on what you need. The older 1.0.3 does not need PS2Nub, where as 1.1.0 and 1.2.1 do. If you are getting errors with the old ACPIPlatform please try removing it completely and booting with -f once. If it works fine, be sure to rm the Extensions.mkext.

 

What I would like from some people that have leopard installed, could you please run this command from terminal and post the results.

 

sysctl -n machdep.cpu.brand_string

 

I read that in new Kalyway's release there are some ICH9 support by DUNE. Will there be that support in your new release eddie11c?

dude where you been? its already there.

[Tusin]

I think I got the PS2 problem taken care of already, it depends what version of ACPIPlatform you are using on what you need. The older 1.0.3 does not need PS2Nub, where as 1.1.0 and 1.2.1 do. If you are getting errors with the old ACPIPlatform please try removing it completely and booting with -f once. If it works fine, be sure to rm the Extensions.mkext.

 

Eddie, are you saying to remove the AppleACPIPlatform.kext?

[Guest SkipLicks]

Hi eddie, and thank you very much for your work!

 

I have some problems with the AppleNForceATA driver, and I think someone reported it previously.

When I boot on the DVD, I have a black screen with the debugger trace.

 

If this can help you to improove this release, here are my devices id of my IDE/PATA controlers:

PATA (0x00E510DE): PCI\VEN_10DE&DEV_00E5&SUBSYS_A5511297&REV_A2\3&13C0B0C5&0&40

SATA (0x00E310DE): PCI\VEN_10DE&DEV_00E3&SUBSYS_A5511297&REV_A2\3&13C0B0C5&0&50

 

I tried to change some file on the ISO using transmac but I had no success.

If there is something that I can do to test a fix I am available to try it.

 

Thanks

[Mamas]

I been here It's just so many things and stuff into those hackintosh releases, that I don't even know what most of them do..

[eddie11c]

Eddie, are you saying to remove the AppleACPIPlatform.kext?

 

No what I am saying, if you have ACPIPlatform version 1.0.3 you should remove ACPIPS2Nub, its not needed.

 

Hi eddie, and thank you very much for your work!

 

I have some problems with the AppleNForceATA driver, and I think someone reported it previously.

When I boot on the DVD, I have a black screen with the debugger trace.

 

If this can help you to improove this release, here are my devices id of my IDE/PATA controlers:

PATA (0x00E510DE): PCI\VEN_10DE&DEV_00E5&SUBSYS_A5511297&REV_A2\3&13C0B0C5&0&40

SATA (0x00E310DE): PCI\VEN_10DE&DEV_00E3&SUBSYS_A5511297&REV_A2\3&13C0B0C5&0&50

 

I tried to change some file on the ISO using transmac but I had no success.

If there is something that I can do to test a fix I am available to try it.

 

Thanks

 

Is this a panic you get at the initial part of the boot? I could probably move these device ID's out of AppleNforce, but not sure how that would effect others. Nforce boards use the same Device ID's alot. I will take a look at this, if you can search around to see if any other motherboards use these same Device ID's. I will look also, but my time is pretty limited right now, and I still need more info from people running leopard for the output of the sysctl -n machdep.cpu.brand_string

 

Please take a minute if you have Leopard installed and run this command from Terminal and post the output!

[jake123]

What are the specs for your laptops and what kernel did you install?

There are a variety of things you can try but I need a better idea of the above before I can point you in the right direction.

 

PS. Did you try the PS2Nub fix I posted earlier in this thread?

 

I didn't try your fix, the thread is 70+ pages (i think) and would take hourrrs to look through.

I'm using 2 laptops, a Dell Latitude D630 and an XPS m1330. Both are on the 9.2.2 kernel

 

Thanks

 

EDIT: Eddie, on your next release can you include some sigmatel drivers that were made by taurga? Like the 9228, 9220, and 9227 kexts, or the installer and a zip file on the computer with the codecs?

 

+

my result from that in terminal is: Intel® Pentium® 4 CPU 3.00GHz (which is correct)

[eddie11c]

Thanks Jake123, I will look at adding some more sound drivers tonight. Lots of little things to finish up.

[Mamas]

Yes, and Sigmatel STAC9271D, which you can find here: http://forum.insanelymac.com/index.php?act...st&id=18344

 

And PLEASE add working Realtek LAN card driver. Because, how I told before, with RTL card in, the dvd does not even boot up. I think it's because of bad drver or smth.

[vijayagarwal]

Hi eddie,

i posted the wrong device id in my previous post..now i am posting the device id for the controller..

 

PCI\VEN_10DE&DEV_0448&SUBSYS_30CF103C&REV_A1

PCI\VEN_10DE&DEV_0448&SUBSYS_30CF103C

PCI\VEN_10DE&DEV_0448&CC_01018A

PCI\VEN_10DE&DEV_0448&CC_0101

 

thanks..

[Guest SkipLicks]

Is this a panic you get at the initial part of the boot? I could probably move these device ID's out of AppleNforce, but not sure how that would effect others. Nforce boards use the same Device ID's alot. I will take a look at this, if you can search around to see if any other motherboards use these same Device ID's. I will look also, but my time is pretty limited right now, and I still need more info from people running leopard for the output of the sysctl -n machdep.cpu.brand_string

 

Please take a minute if you have Leopard installed and run this command from Terminal and post the output!

Yes it is a panic in the initial part of the boot, few seconds after.

A picture of the screen display is attached.

 

I try to search if other motherboards use this same ID's,

but I think that it is all Nforce3 250GB chipset, espcially AMD Athlon 64 motherboards.

 

I found this ones:

Epox: EP-8KDA3+

Epox: EP-8KDA3+ PRO

Epox: EP-8KDA3J

MSI: K8N Neo Platinum (MS-7030)

MSI: K8N Neo-FSR (MS-7030)

ASUS: K8N-E Deluxe

BIOSTAR: K8NHA Grand

BIOSTAR: K8NHA-M Grand

Albatron: K8X250GB Pro

DFI: LANPARTY UT nF3 250Gb

Jetway: N250DAG

Abit: NF8

Abit: NF8-V

Soltek: SL-B9A-FGR

Soltek: SL-K8AN2-GR

Soltek: SL-K8AN2E-GR

 

I have no Leopard running yet, so I boot on Tiger, and write the commande line "sysctl -n machdep.cpu.brand_string"

It gives me the following result : "AMD Athlon 64 Processor 3000+"

[asoftlad]

What I would like from some people that have leopard installed, could you please run this command from terminal and post the results.

 

sysctl -n machdep.cpu.brand_string

 

 

Genuine Intel® CPU T2050 @ 1.60GHz

 

 

I didn't try your fix, the thread is 70+ pages (i think) and would take hourrrs to look through.

 

Post no. 889 Page 45

Let me know the result

 

please let me know if you find the reason or solution

 

PM me your email and I'll suggest a few things to try

[ak890]

Hey there every one I have a few questions. I have a very rare board (in the sense that not many people use it) an ASUS P5N-D 750i. I got the waiting for root device error but I got lucky in the bios and was abble to boot in. So I got almost every thing running except that the drivers just didn't want to work out for me so I tried Kalaway. The problem there was the other way around. The drivers worked like a dream but the damn thing didn't work verry well I.E. crashes every where. So I was wondering can I transfer drivers and Kexts from Kalaway to Leo 4 all and Vice versa?

[jasonu]

Ok, i am new to this. I have been reading heaps of threads to get some ideas, but 5 days on and i got no where.

 

WHAT I'VE DONE

 

I have downloaded leo4all.

Burnt to dvd.

Tried booting, no luck pauses in the darwin text on black screen.,

Disabled USB, network, sata, acpi in bios and got to (see this image) www.threeworlds.com.au/stop.jpg

see image… os x version not yet set… darwin version… stop….

 

My system.

Motherboard - A8N-E Asus nForce4

CPU- AMD Athlon 64 3200+ Venice

Ram - SDRam DDR PC3200 (200mhz) 1gb.

Video- Nvidia Geforce 7300gt 256mb

BIOS - Nvidia - 42302e31 Version 1013

 

Any well would be appreciated.

Thanks!!

[eddie11c]

Ok, i am new to this. I have been reading heaps of threads to get some ideas, but 5 days on and i got no where.

 

WHAT I'VE DONE

 

I have downloaded leo4all.

Burnt to dvd.

Tried booting, no luck pauses in the darwin text on black screen.,

Disabled USB, network, sata, acpi in bios and got to (see this image) www.threeworlds.com.au/stop.jpg

see image… os x version not yet set… darwin version… stop….

 

My system.

Motherboard - A8N-E Asus nForce4

CPU- AMD Athlon 64 3200+ Venice

Ram - SDRam DDR PC3200 (200mhz) 1gb.

Video- Nvidia Geforce 7300gt 256mb

BIOS - Nvidia - 42302e31 Version 1013

 

Any well would be appreciated.

Thanks!!

ACPI has to be enabled my friend.

[asoftlad]

So I was wondering can I transfer drivers and Kexts from Kalaway to Leo 4 all and Vice versa?

 

Yes

 

1. Install Leo4All ENSURING THE "GOODAPPS" BOX IS CHECKED

2. Boot in and insert the Kaly disc

3.use pacifist (in applications folder) to extract the drivers you need

 

This works either way

[asapreta]

Why x1600 now is not working after many releases of OSX86?

This is the only release I got problems running my card out of box.

[jasonu]

ACPI has to be enabled my friend.

 

 

I can't believe it was something so simple.... !!! it is installing now... Fingers crossed.

Thanks a million!!

[venusk]

Hi Eddie,

 

I tried to install IATKOS 10.5.1 on my PC, but i am Unsuccessful every time, so i am now tired installing it anymore without asking question here. Below is configuration of my PC:

 

Processor: Intel P4 3.4GHz

Motherboard: Intel® 915P

Graphics Card: NVidia 8400GS

Harddrives: Total of 3 harddrives:

1. SATA - Vista Installed(Boot manager)

2. PATA - XP installed

3. SATA - For OS X Leopard(trying to install)

Lan: Onboard for Wired

Wireless: WG311T from Netgear

 

Can you please help if Leo4All will work on my machine?

 

 

I am expecting help from all you here, I saw lot of genius people here, Please help

 

Thanks

Go to the top of the page.Report Post

 

Edit Post.

[ludacrisvp]

What I would like from some people that have leopard installed, could you please run this command from terminal and post the results.

sysctl -n machdep.cpu.brand_string

ludacrisvps-macpro31:~ ludacrisvp$ sysctl -n machdep.cpu.brand_string

AMD Athlon 64 X2 Dual Core Processor 5600+

 

Information about processor is accurate.

[zoinggg]

Try manually setting your IP addresses. I did not change anything as far as network drivers goes. Only changed the video drivers.

 

Ok give these a try.

 

ATI 2600PRO

 

ATI 2600XT & 3870

 

ATI 3850

 

For those new 3650 users around like me, I got my passive EAH3650 working following these steps:

- Installed Kalyway 10.5.1

- Installed Kalyway 10.5.2 combo update

- Installed Apple graphics update

- Installed natit.kext

- Installed 3850 file downloaded from above

I think I didn't followed the correct order but it worked, this allowed me to change resolution, and I don't find the card too hot, but I also suspect that I don't have some visual enhacements I should, but I just arrived here, been reading for a couple of days, and would like to know what should I do to test my graphic configuration and to know what I have and what I don't.

[castelli]

Thanks eddie! this is the first installer that has everworked for me! Here are my specs:

 

Full specifications - HP Pavilion Slimline s3120n - Athlon 64 X2 4200+ 2.2 GHz

Manufacturer: HP

Part number: GC665AA#ABA

General

Platform Technology AMD LIVE!

Processor

Type AMD Athlon 64 X2 4200+ / 2.2 GHz

Multi-Core processor technology Dual-Core

Mainboard

Chipset type NVIDIA GeForce 6150 LE / nForce 430

Data bus speed 1000 MHz

Storage

Hard Drive 1 x 320 GB - Standard - Serial ATA-300 - 7200 rpm

Hard Drive (2nd) None

TV tuner type Digital and analog TV

Analog TV system NTSC

Digital TV reception ATSC

Graphics Controller

Type Integrated

Graphics Processor / Vendor NVIDIA GeForce 6150 LE

Video Memory Shared video memory (UMA)

Audio Output

Type Sound card - Integrated

Audio output compliant standards High Definition Audio

Speaker(s) None

Networking Network adapter

Wireless LAN Supported Yes

Data Link Protocol Ethernet, IEEE 802.11b, IEEE 802.11g, Fast Ethernet

Compliant Standards IEEE 802.11b, IEEE 802.11g

 

 

My sound didnt work at first, but all i had to do was download the driver. I cant get my wireless internet to work.

[jasonu]

Hey Eddie,

Crossing my fingers didn't work...

I had errors coming with the leo4all disk.

SAM Multimedia: READ or WRITE failed. Sense_KEY = numbers.... repeat repeat repaet.

Figured it was the disk, so burnt a second... same thing. ..

 

Then tried the orignal download iatkos v1.

It worked! But then on reboot (after successful install) i got a message popup... You need to restart your computer.

 

So i am in that loop now, looking for answers.... Any ideas? About the Leo4All errors or the other.

Thanks again

Jason

[silaisa]

Hi eddie and all, today I bought a NVidia GF 8400 GS 256Mb and tried to install NVinject 0.21 or 0.22 but no luck, so I downloaded NVidia Installer V1.9 by Punk92 pkg, and when I tried to install Nvidia drivers I got forced to install 10.5.2 drivers (90Mb approx.), I thought, oK lets try...and surprisingly I solved 2 problems: Leo recognized my new card and fully working and dissapeared the booting issues as described in previous posts. I'm telling you this, because I know you're planning to publish a new release so it will be nice to consider some drivers from Punk. Source: http://www.mediafire.com/?e1ncyveedim

 

Best Regards