edisonzh Posted April 6, 2008 Share Posted April 6, 2008 I have exactly the same problem. How can i fix it? Thanks eddie11c Hi, I've downloaded your last release, but I can't install it on my pc... After the boot from DVD, it just reboots after few seconds... What can I do?... Thanks a lot... My configuration: - ASUS M3A32-MPV Deluxe/WiFi-AP - Chipset AMD 790FX/SB600 - Phenom 9500 - IDE and SATA HDD Link to comment Share on other sites More sharing options...
Sander122 Posted April 6, 2008 Share Posted April 6, 2008 It's working great here! Shutdown/Restart working, graphics working (only detected as 200mb while it is 1GB) etc.. Audio & Wifi drivers were in the installer. Only my ICH9 controller isn't working. Link to comment Share on other sites More sharing options...
rnrizki Posted April 6, 2008 Share Posted April 6, 2008 everything works... nothing is not... shutdown, restart, QE/CI,lan,AHCI 9R, ide/ahci, even i manage to install the graphic update ver.1 from the mac software update.. just to check if the system will crash.. and u know what it didn't after had any decent sleep for a week i'm happy... thx man.. i'll like to buy u a beer man... cheers... my rig: speedster abit x38,,, quadcore q6600,,, radeon x1900 xt,,,HHD 250 & 160 SATA,, (all in OC'ed version) Link to comment Share on other sites More sharing options...
Unkwntech Posted April 6, 2008 Share Posted April 6, 2008 Although I'm not sure which version I have I just tried on my system and after the GUI loads and I get the Language Selection screen, my KB/Mouse do not work, I have tried both USB and PS/2 Keyboards and only USB mice. Any suggestions? Link to comment Share on other sites More sharing options...
eddie11c Posted April 6, 2008 Author Share Posted April 6, 2008 Ok I fixed the language issue in the dock and some permssions issues I was having too. I have reworked the Device ID's for Nvidia cards and will add options for a few versions of NVinject. Please take a look to make sure your device ID's are listed. NV20: 0x033310de 0x033010de 0x033110de 0x030110de 0x030210de 0x034410de 0x034310de 0x034110de 0x034210de 0x031410de 0x031110de 0x031210de 0x032610de 0x032310de 0x032110de 0x032210de NV30: 0x014f10de 0x00f310de 0x022110de 0x016310de 0x016210de 0x016110de 0x016210de 0x016010de 0x014110de 0x00f210de 0x014010de 0x00f110de 0x014210de 0x00f410de 0x014310de 0x014710de 0x004110de 0x00c110de 0x004710de 0x00f610de 0x00C010de 0x004510de 0x00f910de 0x00c210de 0x004010de 0x00f910de 0x004310de 0x004810de 0x021810de 0x00c310de 0x016710de 0x016810de 0x014810de 0x00c810de 0x00c910de 0x03d010de 0x03d110de 0x03d210de 0x024110de 0x024210de NV40: 0x01df10de 0x039310de 0x01d110de 0x01d310de 0x01dd10de 0x039210de 0x02e110de 0x039110de 0x039410de 0x00f510de 0x009210de 0x009110de 0x029110de 0x029010de 0x029310de 0x029410de 0x009810de 0x009910de 0x029810de 0x029910de 0x029510de NV50: 0x042310de 0x042210de 0x042110de 0x040210de 0x040010de 0x061110de 0x019310de 0x019110de 0x060010de Link to comment Share on other sites More sharing options...
Sander122 Posted April 6, 2008 Share Posted April 6, 2008 I found a 'bug', in About this mac my CPU shows up as "2.39 GHz Unknown". And I need to boot with cpus=1, but that seems to be a common problem. Link to comment Share on other sites More sharing options...
eddie11c Posted April 6, 2008 Author Share Posted April 6, 2008 I found a 'bug', in About this mac my CPU shows up as "2.39 GHz Unknown".And I need to boot with cpus=1, but that seems to be a common problem. That is not a bug, that happens to almost everyone. Only CPU's currently in use is real Macs ever show their actual CPU info. Link to comment Share on other sites More sharing options...
BB88 Posted April 6, 2008 Share Posted April 6, 2008 Ok I fixed the language issue in the dock and some permssions issues I was having too. I have reworked the Device ID's for Nvidia cards and will add options for a few versions of NVinject. Please take a look to make sure your device ID's are listed. NV20: 0x033310de 0x033010de 0x033110de 0x030110de 0x030210de 0x034410de 0x034310de 0x034110de 0x034210de 0x031410de 0x031110de 0x031210de 0x032610de 0x032310de 0x032110de 0x032210de NV30: 0x014f10de 0x00f310de 0x022110de 0x016310de 0x016210de 0x016110de 0x016210de 0x016010de 0x014110de 0x00f210de 0x014010de 0x00f110de 0x014210de 0x00f410de 0x014310de 0x014710de 0x004110de 0x00c110de 0x004710de 0x00f610de 0x00C010de 0x004510de 0x00f910de 0x00c210de 0x004010de 0x00f910de 0x004310de 0x004810de 0x021810de 0x00c310de 0x016710de 0x016810de 0x014810de 0x00c810de 0x00c910de 0x03d010de 0x03d110de 0x03d210de 0x024110de 0x024210de NV40: 0x01df10de 0x039310de 0x01d110de 0x01d310de 0x01dd10de 0x039210de 0x02e110de 0x039110de 0x039410de 0x00f510de 0x009210de 0x009110de 0x029110de 0x029010de 0x029310de 0x029410de 0x009810de 0x009910de 0x029810de 0x029910de 0x029510de NV50: 0x042310de 0x042210de 0x042110de 0x040210de 0x040010de 0x061110de 0x019310de 0x019110de 0x060010de I'm not sure if mine is listed: in MAC, it says the video adapter cannot be loaded: 0x10DE:0x03EF but in Windows, the device ID is: VEN_10DE&DEV_0402&SUBSYS_050510DE&REV_A1 Link to comment Share on other sites More sharing options...
Mamas Posted April 6, 2008 Share Posted April 6, 2008 eddie11c: Is there a chance You could release a full hackintosh version, included iLife and all other applications and stuff? You can make it into 2 DVD's or one doube layer. I think people wont mind two DVD's or double layer. It would be great to have FULL MAC OS X. Please consider that idea. Thank You very much! Link to comment Share on other sites More sharing options...
N6REJ Posted April 6, 2008 Share Posted April 6, 2008 i'm trying to install Leo4allv2 on a system with a single sata drive. Do I need to do anything special? Link to comment Share on other sites More sharing options...
remko Posted April 6, 2008 Share Posted April 6, 2008 after booting it always gets stuck (above )and goes right back to this screen (below) i've typed everything but it stil goes back to image 2 i've downloaded kali 10.5.1 and Leo4All-10.5.2 Universal but I still had the same problem I have got a HP laptop paviolion dv 6256 eu amd turion 64 X2 tl50 4 gb ram geforce go7200 Link to comment Share on other sites More sharing options...
sama7896 Posted April 6, 2008 Share Posted April 6, 2008 Hi eddie11c, first of all just wanna say this is truly a great release, reminds me of the jas tiger series. First one ever to have all the drivers i needed in a working format. Still i encountered a prolem : After install, booting the windoze partition gives me a "autochck program not found" and then a bsod (googled around and it seems the diskutility format made the windoze partition hidden). Installed twice to make sure it was not something i messed up with the same result. Anyway used the kalyway dvd to format the mac partition, then used your dvd and the error did not show up anymore. Another problem, is that in verbose mode, there are a lot of errors, most of them about ps2nub, although with no consequence.(fix: eliminate verbose mode , anyway i installed the package i knew worked stable for the ps2 keyboard-usb mouse combination, and all was ok, though still with some error -v messages) But, all in one this is a great release. Link to comment Share on other sites More sharing options...
eddie11c Posted April 7, 2008 Author Share Posted April 7, 2008 The bootloader will always flag the Leopard partition active, so before you restart you can just fdisk the Windows partition active again from terminal. Link to comment Share on other sites More sharing options...
eddie11c Posted April 7, 2008 Author Share Posted April 7, 2008 Ok after tinkering around some more I am almost finished with the updates. I need to test some on my AMD CPU, make sure everything is running smoothly. Should only be a couple more days before the update is ready for some testers. I have fixed what I hope are some Device ID issues with ATI and Marvell PATA. I will keep my fingers crossed. I updated the Nvidia kexts to the latest ones available from the Mac Pros, and completely fixed the permissions errors. I have also cleaned up the folders after the install. Link to comment Share on other sites More sharing options...
MF-John Posted April 7, 2008 Share Posted April 7, 2008 Sorry, it's been a bit since I could actually get to my computer. My Specs are all listed here: http://www.mindlessfaction.com/myHackintosh.htm Link to comment Share on other sites More sharing options...
ludacrisvp Posted April 7, 2008 Share Posted April 7, 2008 after booting it always gets stuck (above )and goes right back to this screen (below) hd(31,1) that part in bold seems odd to me. If I know what I'm talking about that should reference hard drive 31 partition 1. All of my installs depending on hard drive have been on either hd(0,1) or hd(3,2). I'm sure someone else could help more but maybe PC-EFI wasnt installed properly. I don't think it should refer to hd(31,1). Anyone else? Link to comment Share on other sites More sharing options...
kaworu nagisa Posted April 7, 2008 Share Posted April 7, 2008 eddie, did u you check OS with polish localization? (im curious about network panel under sys prefs) and how to correct these changes on installed OS, is that possible? or im only able to reinstall it again or download new iso? and how abot that gpu? any chances? Link to comment Share on other sites More sharing options...
RobNyc Posted April 7, 2008 Share Posted April 7, 2008 Anyone with AMD and Nforce4 chipset? Link to comment Share on other sites More sharing options...
Mamas Posted April 7, 2008 Share Posted April 7, 2008 eddie11c: Is there a chance You could release a full hackintosh version, included iLife and all other applications and stuff? You can make it into 2 DVD's or one double layer. I think people wont mind two DVD's or double layer. It would be great to have FULL MAC OS X. Please consider that idea. Thank You very much! Link to comment Share on other sites More sharing options...
argonlazer Posted April 7, 2008 Share Posted April 7, 2008 Couldn't you just download a torrent of iLife? Downloading the current release now, my new Laptop arrives tomorrow. Hopefully it will run smoothly but I'll post back my results here. Link to comment Share on other sites More sharing options...
Unkwntech Posted April 7, 2008 Share Posted April 7, 2008 I wonder if someone could send me a PM with the location of where he is doing his current releases. Link to comment Share on other sites More sharing options...
aku Posted April 7, 2008 Share Posted April 7, 2008 Hey eddie, gotta tell this to ya, i did in fact reach to the installation screen. and guess what... my broadcom wi fi was working out of the box... but alas, i could see no hdd in the diskutility and using my old external hdd is out question as there is too much of valuable data in there... can ya suggest me any kext on injecting which to the dvd i'll be able to see my sata hdd? (MCP61M, nvidia 7150m) Link to comment Share on other sites More sharing options...
Firechild Posted April 7, 2008 Share Posted April 7, 2008 ASUS P5K, Q6600,ATI HD 2600Pro. Thanks, for great installer ( Leo4all V2 ) ! Ihad my Hackintosh up and running in about 20 minutes, scoring Really high at xbench ( 199.33 ). So everything looks great except for LAN which doesn´t work at all for some reason. During installtion i disabled the integrated Gbit LAN and when I rebooted after succesful leo install I enabled it again, The computer booted up but freeze when it came to desktop. Unabling integrated LAN again and inserted a PCI D-Link DGE-528T Gbit card, the computer booted up perfectly but the card is not seen and I can´t use LAN, any suggestions? Link to comment Share on other sites More sharing options...
sama7896 Posted April 7, 2008 Share Posted April 7, 2008 ASUS P5K, Q6600,ATI HD 2600Pro. Thanks, for great installer ( Leo4all V2 ) ! Ihad my Hackintosh up and running in about 20 minutes, scoring Really high at xbench ( 199.33 ). So everything looks great except for LAN which doesn´t work at all for some reason. During installtion i disabled the integrated Gbit LAN and when I rebooted after succesful leo install I enabled it again, The computer booted up but freeze when it came to desktop. Unabling integrated LAN again and inserted a PCI D-Link DGE-528T Gbit card, the computer booted up perfectly but the card is not seen and I can´t use LAN, any suggestions? cool, you have exactly my config. The onboard attansic l1 lan does not work anyway (there were some unconfirmed opinions that it works with iatkos series - should not ofcourse) - lack of drivers. Dust some old card and plug it in. Development http://forum.insanelymac.com/index.php?sho...amp;hl=attansic Link to comment Share on other sites More sharing options...
Firechild Posted April 7, 2008 Share Posted April 7, 2008 ASUS P5K, Q6600,ATI HD 2600Pro. Thanks, for great installer ( Leo4all V2 ) ! Ihad my Hackintosh up and running in about 20 minutes, scoring Really high at xbench ( 199.33 ). So everything looks great except for LAN which doesn´t work at all for some reason. During installtion i disabled the integrated Gbit LAN and when I rebooted after succesful leo install I enabled it again, The computer booted up but freeze when it came to desktop. Unabling integrated LAN again and inserted a PCI D-Link DGE-528T Gbit card, the computer booted up perfectly but the card is not seen and I can´t use LAN, any suggestions? opps, now a major problem...No SATA drives are detected, not even my DVD drive... I tried to disabled the Jmicron chipset to see if the built in LAN would work and when rebooting No SATA drives are seen, I don´t think it caused the problem but that was what I did just before my SATA drives disappeared. Enabling Jmicron again, did not give me the SATA:s back... Ideas? Link to comment Share on other sites More sharing options...
Recommended Posts