Jump to content

Leo4All-10.5.2 Universal AMD/INTEL[SSE2/SSE3]

eddie11c

By eddie11c,
in OSx86 10.5 (Leopard)

 Share
1,392 posts in this topic

Recommended Posts

eddie11c
eddie11c
Posted
  • Author
Posted

BBedit was a program I included with the applications(if you chose to install them) for just such occasion.

OK...guys i dont know how i got it done yet but i managed to install the update from time machine with pacifist and installed the kernel and the system kext too..... I will try to make a decent post about how i did it but heres a screenshot of it aplyed...I will be back later with an update on this...BTW i dont have vanilla install....
Nothing special there, that was inlcuded with the last PPF patch.
Link to comment
Share on other sites
Jezz
Jezz
Posted
Posted

Really? Tried Tiger, no luck, they said in IRC that it was because of the IDE DVD drive.

I mean the DVD drive is IDE, the normal hd is Sata, so i hope this one works, gonna burn it then :)

Good job with the release, wish me luck :P

Link to comment
Share on other sites
Snerler
Snerler
Posted
Posted

Jezz - Most people's DVD drives are still IDE so that should not be a problem. But if you have an NForce4 motherboard or something similar the problem might be that you cannot boot from an SATA hard drive.

 

 

Im having a problem with Ethernet. It works on the first boot, but then stops working after I reboot. I reinstalled a few times and the same thing happens. I have the NForce4 network controller. How can i solve this?

Link to comment
Share on other sites
Jezz
Jezz
Posted
Posted

No luck, apple.com.boot.plist not found error, yes i changed sata configuration to AHCI

 

Im a bit of newbie with the whole x86, but i researched a bit, could it be that i am not install any release because of the Jmicron controller(Asus P5B)?

Link to comment
Share on other sites
chico_stang
chico_stang
Posted
Posted
BBedit was a program I included with the applications(if you chose to install them) for just such occasion.Nothing special there, that was inlcuded with the last PPF patch.

 

Hey Eddie,

 

Thanks for your explanation. I did not install the extra applications, I just installed the main and necessary components. However, I downloaded a trial version of BBEdit and removed the line of code you told me, and now the bootscreen appears. That's what I wanted. Thanks alot again. Keep up the good work.

 

Lastly, I have another question. My video card is nVidia GeForce 6100 (Integrated) and although I see everything right, I can't change resolution. It's currently set at 1024 x 768, but I want the native resolution of my monitor (1440 x 900). So, I've searched and it seems this card is currently incompatible. Is there a way to increase the resolution? If not, what video card do you recommend me that will work 100% with your release?

Link to comment
Share on other sites
Nucleus
Nucleus
Posted
Posted

Computer Spec [related to HDD]

 

Model name - [Laptop] Samsung Sens R20 Plus

HDD - 120GB SATA HDD

Chipset - ATI 690G [southbridge Chipset(SATA HDD Controller) = SB600]

CPU = Core2Duo T7100 [Mobile Processor] [Just like the Conroe]

 

Hey guys

I have tried to install with Leo4allv2 justnow.

 

First time that I tried to boot into leo4allv2 DVD, I saw the error "Still wating for root device". So I tried to boot with "-v -f" option but the DVD still showed me same error.

 

I entered CMOS set then changed the value named "Large disk access mode", from [DOS] to [Others].

 

After do this, I tried to boot again but It showed me same error again. So, I tried to boot with "-v -f" again. Then, Finally, I suceeded to enter install screen.

 

However, even if I can see the install screen, there is one more problem. The DVD cannot mount the Partition that I want to install the Leo. It recognizes the HDD and all the partitions. But, Leo4allv2 is not able to mount the partition although the partition is HFS+ or FAT (FAT32).

 

Recognizing my HDD means the DVD contains SB600 driver because the DVDs with out SB600 is not able to recognize my HDD.

 

Aren't there any solutions? Help me

Thanks

Link to comment
Share on other sites
mj29
mj29
Posted
Posted
Hmm without knowing what chipset your using I can't be of much help.

 

Chipset

 

• AMD 790X (AMD RD780) Chipset

- HyperTransport connection to AMD Phenom/Athlon processor

- HyperTransport supporting speed up to 2.6GHz (5200mt/s)

- Supports PCI-E x 16& PCI-E X 1

 

• ATI SB600 Chipset

- Supports SATAII controllers for four drives

- Supports single channel Ultra DMA 66/100/133 master mode EIDE controller

- ACPI & PC2001 compliant enhanced power managment

- Supports Hi-Speed (USB2.0) controller 480 mbsec transfer rate up to 10 ports

Link to comment
Share on other sites
eddie11c
eddie11c
Posted
  • Author
Posted

Fixed the link in my post earlier and updated wiki, had to correct a permissions issue with the PS2 installer.

Chipset• AMD 790X (AMD RD780) Chipset- HyperTransport connection to AMD Phenom/Athlon processor- HyperTransport supporting speed up to 2.6GHz (5200mt/s)- Supports PCI-E x 16& PCI-E X 1• ATI SB600 Chipset- Supports SATAII controllers for four drives- Supports single channel Ultra DMA 66/100/133 master mode EIDE controller- ACPI & PC2001 compliant enhanced power managment- Supports Hi-Speed (USB2.0) controller 480 mbsec transfer rate up to 10 ports
Here are the 2 files from the DVD. Try installing these with kexthelper.Archive.zip
Link to comment
Share on other sites
mj29
mj29
Posted
Posted
Fixed the link in my post earlier and updated wiki, had to correct a permissions issue with the PS2 installer.Here are the 2 files from the DVD. Try installing these with kexthelper.Archive.zip

 

Thanks eddie I will give it a try tonight! Do you know anything about Shutdown and Restart function not working. When ever I try to use either one I get a black screen with a CPU Panic. Im using a AMD 64 4200+ Dual Core rig?

Link to comment
Share on other sites
Nexus™ uk
Nexus™ uk
Posted
Posted

would the installer boot with pentium 4? i have a mobile pentium 4 2.4ghz 512kb cache 400mhz fsb SSe2 only. the beta version i downloaded rebooted itself before even going to the menu. if anyone had sucess with p4 please let me know so i could try this release. thanks -_-

Link to comment
Share on other sites
aku
aku
Posted
Posted

Dear Eddie,

i'm having a hp pavilion laptop (dv6502au~dv6500z)(AMD Turion X2 Tl-56)

Its having a gForce 7150m, nForce 630m chipset (mcp61m) with a sata harddisk.

Do you think your flavor of leo4all v2 will work on my lappy?

 

(If it's going to be possible by the injection of a few kext in the dvd, can you tell me which kexts do i need for my hardware?)

 

Thanking You in advance ;)

Link to comment
Share on other sites
neoanderthal
neoanderthal
Posted
Posted

Just a quick note - Installed Leo4All-10.5.2 on a Lenovo Thinkpad T61 (2686 57U ) - display works great - keyboard, trackpad, network, and sound don't. I poked around in the extensions, and noticed that no PS2 extensions were to be found, which is no doubt why the keyboard's not working. I'll play around with it some more and see if I can figure out what's up.

 

I'm also curious as to whether anyone's had any luck getting this installed on an AMD 690-series chipset? I'm probably going to try installing this on my pc when I get home, and I'll see what happens.

Link to comment
Share on other sites
eddie11c
eddie11c
Posted
  • Author
Posted
Just a quick note - Installed Leo4All-10.5.2 on a Lenovo Thinkpad T61 (2686 57U ) - display works great - keyboard, trackpad, network, and sound don't. I poked around in the extensions, and noticed that no PS2 extensions were to be found, which is no doubt why the keyboard's not working. I'll play around with it some more and see if I can figure out what's up.

 

I'm also curious as to whether anyone's had any luck getting this installed on an AMD 690-series chipset? I'm probably going to try installing this on my pc when I get home, and I'll see what happens.

 

 

try the package I posted earlier for PS2 support, let me know if it works.

Link to comment
Share on other sites
eddie11c
eddie11c
Posted
  • Author
Posted
@ eddie, mate, do ya think i'll be able to reach (atleast) the installation screen with leo4all v2?

btw, is the iso available on the newsgroup?

 

I have no idea if that chipset is supported with the NforceATA kext. I am working on an alternative for some other Nforce boards that need VIAATA instead, in case you fall into that group.

Link to comment
Share on other sites
J_J_2_Ro
J_J_2_Ro
Posted
Posted

Hi Eddie, need help.

I want to install Leo4All, but I don't know if my system is OK for this because I have installed comboupdate 10.5.2 on iAtkos1.0i and it crashed, it restarted every time when Mac OS X was loading (Apple screen and reboot and so on).

Are there any drivers for ATI X1050 chipset?

 

My system is:

 

Gigabyte S3-P945

1 GB RAM - 667MHz

Intel Core Duo ~1.8 GB/Core

Asus EAX1050 (ATI)

HDD 160GB

 

I hope Leo4All will be ok from the first...I'm downloading it now.

Link to comment
Share on other sites
Odice
Odice
Posted
Posted

Hi there, this is my first time trying to install Leopard on a pc.

 

When i boot the disk and it goes to the black screen, it gives a lot of texts, and an error, im not sure what it is, but i think it could be that the installer doesn´t recognizes my Discs. Both of them are ATA.

 

Some of the lines i get are:

 

AppleNVIDIAnForceATA: NVidia CK8s IDE

 

disk2s2: I/O Error

HFS_mountroot failed: 5

panic(cpu 0 caller somecodehere) "nsf_boot_init, morething here".

 

My specs:

- Chaintech VNf4 Ultra Motherboard (Nforce 4 Ultra Chip Based)

- Cpu AMD64 3000+ In a 939 Slot.

- 2 Ata Hard Disk (1 With Windows 2 partitions (80gb), The second is free (20gb) i just deleted all the partitions and set the space free to install leopard there).

- Ati Radeon X700pro Videocard

- 512mb Ram

 

PD: I Checked the MD5 checksum of the ISO and it was fine, and i burned the DVD at 4x speed (the lowest) with verification (it was ok too).

I hope u can help me, thanks =)

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...