eddie11c Posted March 25, 2008 Author Share Posted March 25, 2008 With a SATA DVD choose the 2nd option, the test version of NforceATA. Link to comment Share on other sites More sharing options...
doktaphex Posted March 25, 2008 Share Posted March 25, 2008 Look HERE!. Have a nice day. You are awesome, I tried using search function on the site, but it tells me that i'm doing something wrong, maybe i am, but i don't think so. Anyway, I seem to be up and running, so thanks. Link to comment Share on other sites More sharing options...
eddie11c Posted March 25, 2008 Author Share Posted March 25, 2008 Great glad to hear its working for ya! I am secretly working on a little something that will hopefully interest some people. I know it does for me! Will post back later once I get some more testing done. Link to comment Share on other sites More sharing options...
Dementual Posted March 25, 2008 Share Posted March 25, 2008 With a SATA DVD choose the 2nd option, the test version of NforceATA. Alright thanks. Although on the topic of problems- the errors at DVD startup are supposed to be there, right? Link to comment Share on other sites More sharing options...
WaxTrax! Posted March 25, 2008 Share Posted March 25, 2008 With the -f problem, I was using the vanilla 9.2.2 kernel. Thanks :-) Link to comment Share on other sites More sharing options...
KariNeko Posted March 25, 2008 Share Posted March 25, 2008 eddie11c, QE/CI are working, the problem is that there aren't any resolutions to choose from at system preferences. I think it's a problem with GMA's Natit that many people were experiencing. Your original Leo4All release worked fine, well I had sometimes little mouse artifacts like others but I could run the display at 1920 with QE/CI. Greetings Link to comment Share on other sites More sharing options...
eddie11c Posted March 25, 2008 Author Share Posted March 25, 2008 eddie11c, QE/CI are working, the problem is that there aren't any resolutions to choose from at system preferences. I think it's a problem with GMA's Natit that many people were experiencing.Your original Leo4All release worked fine, well I had sometimes little mouse artifacts like others but I could run the display at 1920 with QE/CI.GreetingsThen it may be a matter of the AppleIntegratedFramebuffer, try this one.AppleIntelIntegratedFramebuffer.kext.zipAlright thanks.Although on the topic of problems- the errors at DVD startup are supposed to be there, right?On my Nforce board I always get at least one SAM error, the driver shuts down the drives at first then powers them back up. When they power back up I get at least one error everytime. Link to comment Share on other sites More sharing options...
cloudpjff7 Posted March 25, 2008 Share Posted March 25, 2008 Hey eddie, I'm that guy with the nForce 560. Well, Guess what, my hard disk isn't recognized by disk utility, and in system profiler, it says I have no Serial-ATA devices connected. Could that be because I don't have a fat32 partition, all I have is an ntfs and a few ext3 partitions (I don't think so because I don't even see a hard drive in the column)? Is there any thing I could do to get it to work without buying a external hard drive. It's a laptop a hp dv6748us, and I'd prefer to have my hard drive inside if you know what I mean. Well, I do about anything beside that, so please let me know if you can think of anything to make it work.. Link to comment Share on other sites More sharing options...
eddie11c Posted March 25, 2008 Author Share Posted March 25, 2008 Hey eddie,I'm that guy with the nForce 560. Well, Guess what, my hard disk isn't recognized by disk utility, and in system profiler, it says I have no Serial-ATA devices connected. Could that be because I don't have a fat32 partition, all I have is an ntfs and a few ext3 partitions (I don't think so because I don't even see a hard drive in the column)? Is there any thing I could do to get it to work without buying a external hard drive. It's a laptop a hp dv6748us, and I'd prefer to have my hard drive inside if you know what I mean. Well, I do about anything beside that, so please let me know if you can think of anything to make it work.. Ok here is the deal with your chipset, I could probably make it work. But in doing so I would break the disk for alot of other users. Nforce boards use the same Device ID's for many chipsets. I could make the disk work for yours(maybe) but then it would not work for mine. As of now I have not figured out a fix, I think this is left for Medevil if he is still working on his drivers. I will check into making a small patch later in the week that can be applied for your chipset maybe. I will get back to you on here. Link to comment Share on other sites More sharing options...
cloudpjff7 Posted March 25, 2008 Share Posted March 25, 2008 That sounds pretty cool, thanks for trying. I guess you could make another ppf patch for the fix? I don't know about you but I've seen alot of nforce users with this problem. I'd bet you'd have a lot of people who'd love you if you made a patch (including me ). Well, that to the side, thanks for the help. I'm actually interested in what the problem could be, if you could let me know. Link to comment Share on other sites More sharing options...
kHz Posted March 25, 2008 Share Posted March 25, 2008 AMD Athlon 64 3200+ ( sse2 ) ATI Radeon 9550 2 hdds ... a 250 and a 40 ( both IDE ) 1 gig of ram NVIDIA nForce Networking Controller ( i have a gigabyte wireless card too, but i would prefer not to use wireless ) Realtek AC97 audio motherboard: Gigabyte nForce 3 250 ( exact model GA-K8NS ) this is what i keep getting when trying to get to the installer it just sits there after displaying kernal version.. nothing happens from there. i'm not even sure where to start looking for a solution, i'm not very good a debugging from that mumbo jumbo Link to comment Share on other sites More sharing options...
ha77 Posted March 25, 2008 Share Posted March 25, 2008 Seems like this release is great. I will thank you later after I try it. I tried almost all of them and still couldnt make it to work on my config. (see my sig) so do you think I will with this one? I finished with download but Im at work so I will try it later.... Ill keep you posted but I would like to know should I expect some issues? thank you in advance... talk to you guys later.... Link to comment Share on other sites More sharing options...
eddie11c Posted March 25, 2008 Author Share Posted March 25, 2008 AMD Athlon 64 3200+ ( sse2 )ATI Radeon 9550 2 hdds ... a 250 and a 40 ( both IDE ) 1 gig of ram NVIDIA nForce Networking Controller ( i have a gigabyte wireless card too, but i would prefer not to use wireless ) Realtek AC97 audio motherboard: Gigabyte nForce 3 250 ( exact model GA-K8NS ) this is what i keep getting when trying to get to the installer it just sits there after displaying kernal version.. nothing happens from there. i'm not even sure where to start looking for a solution, i'm not very good a debugging from that mumbo jumbo Try to set ACPI in your BIOS to enabled, you can also try booting with cpus=1. Link to comment Share on other sites More sharing options...
termin8tor Posted March 25, 2008 Share Posted March 25, 2008 I posted here once before about an Nforce problem regarding SATA and it not showing the harddisk within the Disk Utility when installing. I have read in a few places that it's an AHCI problem, however I cannot disable it as I use a HP notebook which has an extremely restricted BIOS. You (eddie11c) suggested I take a few pictures of the bios about 7 pages back in the thread, however there isn't much point (there are no options for AHCI) heck the only thing that CAN be configured is boot device order. Anyways I was wondering if you might know how i'd go about getting nForce630 m working? the device ID for my SATA controller is 0x055010de. Your installer detects the DVD drive fine which is on an ATA bus, so presumably the problem lies with drivers for SATA? I do have an external harddisk; I can install os X (to my ipod) and do any patching within that if need be. Does anyone have an ideas on how I'd go about this? I did once try medevils driver within 10.4.8 but didn't have any luck, I tried injecting it into the install DVD, but it was a no go. Anyway, any suggestions on how to get leo4all working with my sata harddisk? i'd prefer to have os X installed on the laptop itself and not on an external drive =) Link to comment Share on other sites More sharing options...
Reality-X Posted March 25, 2008 Share Posted March 25, 2008 Eddie, Well I figured out my DVD/CD-RW problem. It seems I just needed to use the TEST version of Medevils NforceATA kext. Now its reads DVD/CD's no prob. Waiting on his release so I can use the buring capability of the SATA drive. Link to comment Share on other sites More sharing options...
eddie11c Posted March 25, 2008 Author Share Posted March 25, 2008 Good to hear, I know he is reworking the whole driver to address some short-comings in is initial driver. Will probably be a while before you get SATA burning capabilities. Link to comment Share on other sites More sharing options...
p0p4z Posted March 25, 2008 Share Posted March 25, 2008 Can´t boot the cd on a Gigabyte 965P-DS4 Motherboard. "still waiting for root device" error. I´ve tried on a dvd and mounting it on a partition, always gives the same error. All the others distros run fine (kallway, iaktos etc). and btw, all the drives (hd and dvd) are sata. Link to comment Share on other sites More sharing options...
sniper_zero Posted March 25, 2008 Share Posted March 25, 2008 If you could open the installer log while it is installing and post that up, I can look and see whats happening. When you have the installer log in the front it will not auto reboot at the end of the installation until you close it. I installed again and surprisingly didn't get the error anymore, went right to the end with a successful installation. Still tried to save the log to a USB flash drive, but I couldn't, it wouldn't show up there. So it restarted but alas, no bootloader. The disc passed the check at the start by the way. EDIT:I'll download the new version of Leo4All and try that. If that doesn't work, I guess i'll try iAtkos. Link to comment Share on other sites More sharing options...
NixGaL Posted March 25, 2008 Share Posted March 25, 2008 Perfect Install~~~~ GreatWork!! eddie. Everything worked right out of the box, very easy and smooth going installation. Here are my system configurations. Processor: AMD dual core x2 4400+ Mboard: M2N-e Memory: 4GB 2 SEAGATE SATA 160Gb's 1 WD SATA 250GB GFX: 7600 GT LAN: RTL8139c and i've successfully installed - Apache - PHP - Mysql - Squid Its running all smooooth... one question? the Leo4allv1 is same Universal image ? or there is another v1 patch? do i need to install v1 patch before this newly released v2 patch... please clarify. Thnx again!!!! Link to comment Share on other sites More sharing options...
eddie11c Posted March 25, 2008 Author Share Posted March 25, 2008 There are two ISO's I released. The original and V2. The original can be patched with V1 then V2(must do V1 first) or you can just get the prepatched version. Link to comment Share on other sites More sharing options...
kHz Posted March 25, 2008 Share Posted March 25, 2008 Try to set ACPI in your BIOS to enabled, you can also try booting with cpus=1. I have tried S1 and S3 acpi options on my bios but it's still showing the same error, and the same for putting cpus=1 Link to comment Share on other sites More sharing options...
silentdan Posted March 25, 2008 Share Posted March 25, 2008 Hey great rellease....im attempting to install this on my old Sony VAIO descktop with P4 2.8 ghz 2 gb ram and a e-Nvidia 7600 gt and everything went ok.I had to install the sound drivers after i installed everything and it worked however i cant get the 7600gt to install properly.My QE is not working and also At startup Darwin says that my video card is Nvidia 256 when it should say 512 cause that ia what i have. Can someone posibly give a nudge in the right direction on how to get my video card to work properly. Thanks! Link to comment Share on other sites More sharing options...
WinLinMac01 Posted March 25, 2008 Share Posted March 25, 2008 Eddie11c, do you have that background you applied on the back of the installation? I would like to apply that as my background. That would be nice. Thanks. =) Link to comment Share on other sites More sharing options...
vlad1966 Posted March 25, 2008 Share Posted March 25, 2008 eddie11c, Great release - I just finished downloading v2 today, however I'm getting a strange problem when I try to access my NAS server that I built. When ever I try Apple Menu > Go > Connect to Server, I type in the the correct server IP address, and I get a pop-up box that says: "The text enetered doen not appear to be a recognized URL format. URLs should begin with afp://, at://, file://, etc." I've never had this problem on Kalyway oe Leo4All 1.0. I've tried typing the address with afp:// & without (just putting in the address) but same result. Please help. Link to comment Share on other sites More sharing options...
SuperNet33 Posted March 25, 2008 Share Posted March 25, 2008 So, I am downloading Leo4all v2.. What do I do with this PPF2 file? Link to comment Share on other sites More sharing options...
Recommended Posts