drtigerlilly Posted June 21, 2008 Share Posted June 21, 2008 I'm on kalyway 10.5.2 on X61 and bluetooth didn't detect at all for me. I have the wireless working. Also having the same multitouch problem as others, I got tabletmagic to see a tablet but no response with the pen at all. Figure I'd move on to the bluetooth since Ethernet and Sound are out for a bit. It had to have been turned on in windows before to get it detected, b/c the wireless switch alone doesn't turn it on, even in windows installing the bluetooth with a fresh install is problematic b/c it can't find it. Link to comment Share on other sites More sharing options...
wyslij Posted June 22, 2008 Share Posted June 22, 2008 Any possibility for a similar fix to get the TabletMagic to work on X60t? Please let me know! Link to comment Share on other sites More sharing options...
outZider Posted June 22, 2008 Author Share Posted June 22, 2008 Any possibility for a similar fix to get the TabletMagic to work on X60t? Please let me know! No serial ports show up, and the enabler doesn't work? Provide a dmesg output from a linux boot, if you can, and a copy of "ioreg -l" from the terminal. Link to comment Share on other sites More sharing options...
popophobia Posted June 25, 2008 Share Posted June 25, 2008 http://forum.insanelymac.com/index.php?s=&...st&p=795946 Just want to keep you guys updated. Turbo is working on the sound patch (I really think it will work soon) and he did brightness control driver. Link to comment Share on other sites More sharing options...
popophobia Posted June 27, 2008 Share Posted June 27, 2008 I'm happy to notify this: Go to the thread above, and get the patch from Turbo. Sound works at last. Remove AppleHDA.kext and AppleAzaliaAudio.kext. You're gold. Donate something to Turbo if you can. He works really hard on this project. Link to comment Share on other sites More sharing options...
mulletman13 Posted June 28, 2008 Share Posted June 28, 2008 Has anybody figured out how to control the backlight and/or the middle button on the UltraNav? Link to comment Share on other sites More sharing options...
MacTabletPC Posted June 29, 2008 Share Posted June 29, 2008 No serial ports show up, and the enabler doesn't work? Provide a dmesg output from a linux boot, if you can, and a copy of "ioreg -l" from the terminal. I've attached the ioreg -l output from the Terminal - please let me know what you think. - Marc O. ioreg.rtf Link to comment Share on other sites More sharing options...
drtigerlilly Posted June 30, 2008 Share Posted June 30, 2008 Has anybody figured out how to control the backlight and/or the middle button on the UltraNav? My middle button, works just fine in firefox & even in safari. Link to comment Share on other sites More sharing options...
mulletman13 Posted July 1, 2008 Share Posted July 1, 2008 My middle button, works just fine in firefox & even in safari. Would you mind posting your ApplePS2Controller.kext extension? I've heard of people having success on Kaly with it but not iAtkos... not sure if there is a difference. Link to comment Share on other sites More sharing options...
outZider Posted July 1, 2008 Author Share Posted July 1, 2008 I've attached the ioreg -l output from the Terminal - please let me know what you think.- Marc O. Looks like your serial port is already enabled. Have you edited the Info.plist in Apple16X50ACPI.kext to replace the PNP line with WACF004? Link to comment Share on other sites More sharing options...
mulletman13 Posted July 1, 2008 Share Posted July 1, 2008 I've tried contacting Turbo (the guy who got the sound working) about his working x3100 backlight driver nub, but he has just ignored my PM/email. Link to comment Share on other sites More sharing options...
outZider Posted July 1, 2008 Author Share Posted July 1, 2008 I've tried contacting Turbo (the guy who got the sound working) about his working x3100 backlight driver nub, but he has just ignored my PM/email. It's apparently not ready for primetime yet. Link to comment Share on other sites More sharing options...
mulletman13 Posted July 1, 2008 Share Posted July 1, 2008 It's apparently not ready for primetime yet. Well good to have an answer. Did he post elsewhere? Link to comment Share on other sites More sharing options...
GiuPPy Posted July 1, 2008 Share Posted July 1, 2008 Hi, I got an X61 Tablet running kalyway 10.5.2 updated to 10.5.3 and now 10.5.4 ( kernel 9.4.0 ) everything working fine except the sleep .. it will go in sleep but when it back from sleep everything seem to be locked I have to reboot switching off another issue is the CPU temp that is constantly 70-75˚ C . any suggestion ? Thanks Link to comment Share on other sites More sharing options...
popophobia Posted July 2, 2008 Share Posted July 2, 2008 I'm sure he's busy with other things too. He replied to my donation and it seems like he's still working on them on and off. I'm happy with my system now though. Link to comment Share on other sites More sharing options...
drtigerlilly Posted July 2, 2008 Share Posted July 2, 2008 For those that can't find the ad1984 kext to get sound working (output only) you can get it here (right click & save target as) from x86osx.com, Turbo's site seems to be down. Usage instructions here Link to comment Share on other sites More sharing options...
jeffjank33 Posted July 8, 2008 Share Posted July 8, 2008 Yeah I PM'd turbo too. I need to get his ethernet fix. I don't need the ethernet for connectivity but believe it is needed to get time machine working. Any of you have time machine working where you DON'T have ethernet working? I bought an atheros wifi adapter (replace a 4965AGN) so I have connectivity but still can't get time machine to work. From what I read it looks for the en0 adapter to work. Link to comment Share on other sites More sharing options...
drtigerlilly Posted July 10, 2008 Share Posted July 10, 2008 This is like my millionth install trying to get everything working properly, but i realize that i can't get the digitizer to start w/ the pc, i have to manually go into tablet magic and double tap on enabled for it to pick up the digitizer. I never had this problem previously, the only thing that's different, is that i chose the power management patch on installation, should this affect anything? Link to comment Share on other sites More sharing options...
JustInSane Posted July 12, 2008 Share Posted July 12, 2008 WirelessDo you have the ThinkPad Wireless MiniPCIE card? If so -- you have Atheros, and you're ready for wireless! Have the Intel 3945 card? You're screwed! What's ironic here is that those who want to run OSX on a lenovo are likely to buy a linux-based lenovo (T61) -- for a couple reasons: not having to pay for a windows license, and because the linux versions are likely to come with more mainstream components. Indeed, without doing in-depth research on every component, one would expect the intel wifi chips to have more widespread support than some in-house brand. The Thinkpad wifi nic is not even an option for those who customize a linux lappy. Perhaps rightly so, but it's a shame Lenovo does not supply non-OS configurations. I should also add that if you buy a linux-based Thinkpad, the wired ethernet controller (intel 82566mm) also has no OSX driver. Below are the details on the two broken* NICs: (ethernet controller) intel 82566mm vendor id: 8086h device id: 1049h (wifi controller) intel 3945 vendor id: 8086h device id: 4227h * Broken in terms of OSX.. They work fine in linux. Link to comment Share on other sites More sharing options...
cmarek Posted July 15, 2008 Share Posted July 15, 2008 Looks like your serial port is already enabled. Have you edited the Info.plist in Apple16X50ACPI.kext to replace the PNP line with WACF004? I have a X61t and have wireless and sound working. I am at a loss for how to get the Tablet Functions operational. I have installed the Kext, changed the info.plist, reapaired permissions, ran enabler script (which I'm not sure if it accomplished anything), and rebooted etc... I know I am missing something, but I cant seem to figure out what it is. I would appreciate any assistance. I'm not sure which serial port the tablet is using, that may be an issue. When I run the tablet enabler script I see: -bash:/ ThinkPadTabletEnabler: Malformed Mach-o file Thanks in adavance! Chris Link to comment Share on other sites More sharing options...
outZider Posted July 15, 2008 Author Share Posted July 15, 2008 -bash:/ ThinkPadTabletEnabler: Malformed Mach-o file TabletEnabler should be a kext installed in /System/Library/Extensions. Nothing needs to be run except for TabletMagic. Link to comment Share on other sites More sharing options...
cmarek Posted July 16, 2008 Share Posted July 16, 2008 TabletEnabler should be a kext installed in /System/Library/Extensions. Nothing needs to be run except for TabletMagic. Thanks for getting back so quickly. Like I said I'm sure I am missing something.... I have the kext installed with kext helper. Changed the info.plist to yours, fixed permissions, rebooted, etc... On re-start there are no obvious probs on startup. Then pen doesnt work. Should there be a pref pane or something somewhere? The only other kext I have installed was for audio, and I just used kext helper, and it worked. I'm obviously new to this, but would love to be able to use my tablet. Thanks for your assistance. Chris Link to comment Share on other sites More sharing options...
outZider Posted July 16, 2008 Author Share Posted July 16, 2008 Have you installed TabletMagic as well -- there should be a preference pane for that. If you have, and it's still not working, go to your terminal, type "ioreg -l > ioreg.txt", and attach ioreg.txt in your home folder to your reply. Link to comment Share on other sites More sharing options...
cmarek Posted July 16, 2008 Share Posted July 16, 2008 Well I feel like an idiot. I really appreciate your help. Apparently jumping in late in the forums, I somehow missed that I had to install TabletMagic the program... I did install it, and it says No Tablet Found. I have attached my ioreg.txt. I do appreciate your assistance and patience. Thanks. ------ Question 2. Since, I have already demonstrated how little I know about this sort of thing... I currently am running 10.5.2 Kallyway Vanilla. If I wish to update, do I need to find and re-install a later version of Kallyway, or at some point can I use the system update feature? Or manually download updates from apple? ioreg.txt Link to comment Share on other sites More sharing options...
outZider Posted July 16, 2008 Author Share Posted July 16, 2008 It looks like you've installed the tablet enabler, as the device is active, but it looks like you haven't patched the Info.plist in Apple16X50Serial.kext/Contents/Plugins/Apple16X50ACPI.kext/Contents -- change PNPxxxx to WACF004 in there, and you're good to go. As for the system update, there are a few good howtos in the updates forum. You'll be able to find the 10.5.2 to 10.5.3 updater, and 10.5.4 can be installed without any additional help. Well I feel like an idiot. I really appreciate your help. Apparently jumping in late in the forums, I somehow missed that I had to install TabletMagic the program... I did install it, and it says No Tablet Found. I have attached my ioreg.txt. I do appreciate your assistance and patience. Thanks. ------ Question 2. Since, I have already demonstrated how little I know about this sort of thing... I currently am running 10.5.2 Kallyway Vanilla. If I wish to update, do I need to find and re-install a later version of Kallyway, or at some point can I use the system update feature? Or manually download updates from apple? Link to comment Share on other sites More sharing options...
Recommended Posts