jooby Posted March 4, 2008 Share Posted March 4, 2008 Hey RX-7-Trainee, I have the same laptop as you and also have the same exact problems. I've been trying different codecs and havn't found any that work. My sound only works when my laptop is put to sleep; but for some reason my trackpad does not fully work afterwards. Do you have a fully functioning trackpad and keyboard? Link to comment Share on other sites More sharing options...
sireg Posted March 5, 2008 Share Posted March 5, 2008 Hello People. I have a question. How do I find my Subsystem ID. I looked in Device Manager, and could not find something with a 200, 400, 500 etc ending. I am running Leopard, and currently My sound is comming out of both the speakrs and headphones. Has anyone been able to fix ALC262 using these patches on Leopard? Link to comment Share on other sites More sharing options...
zikman Posted March 6, 2008 Share Posted March 6, 2008 SubSystem ID :0x104d1100 With the beta kexts...i see output in preferences for line out and speakers...However NO sound! Mic works ok.... What kexts should i use???? Linux Dump: Codec: Realtek ALC262 Address: 0 Vendor Id: 0x10ec0262 Subsystem Id: 0x104d1100 Revision Id: 0x100100 Default PCM: rates 0x560, bits 0x0e, types 0x1 Default Amp-In caps: N/A Default Amp-Out caps: N/A Node 0x02 [Audio Output] wcaps 0x11: Stereo PCM: rates 0x560, bits 0x0e, types 0x1 Node 0x03 [Audio Output] wcaps 0x11: Stereo PCM: rates 0x560, bits 0x0e, types 0x1 Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital PCM: rates 0x560, bits 0x1e, types 0x1 Node 0x07 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x18 0x18] PCM: rates 0x160, bits 0x06, types 0x1 Connection: 1 0x24 Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x18 0x18] PCM: rates 0x160, bits 0x06, types 0x1 Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x18 0x18] PCM: rates 0x160, bits 0x06, types 0x1 Connection: 1 0x22 Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital PCM: rates 0x560, bits 0x1e, types 0x1 Connection: 1 0x1f Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x00 0x00] [0x98 0x98] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80] [0x97 0x97] [0x97 0x97] Connection: 8 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x18 0x18] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Connection: 2 0x03 0x0b Node 0x0e [Audio Mixer] wcaps 0x20010e: Mono Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00] [0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x18] Connection: 2 0x02 0x0b Node 0x0f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x083e: IN OUT HP Detect Pin Default 0x04017120: [Jack] Line Out at Ext Right Conn = 1/8, Color = Yellow Pin-ctls: 0x40: OUT Connection: 2 0x0c* 0x0d Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x083e: IN OUT HP Detect Pin Default 0x0621101f: [Jack] HP Out at Ext Bottom Conn = 1/8, Color = Black Pin-ctls: 0xc0: OUT HP Connection: 2 0x0c* 0x0d Node 0x16 [Pin Complex] wcaps 0x40010c: Mono Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00] Pincap 0x0810: OUT Pin Default 0x90130110: [Fixed] Speaker at Int N/A Conn = ATAPI, Color = Unknown Pin-ctls: 0x40: OUT Connection: 1 0x0e Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x08173e: IN OUT HP Detect Pin Default 0x06a15840: [Jack] Mic at Ext Bottom Conn = 1/8, Color = Red Pin-ctls: 0x21: IN Connection: 2 0x0c* 0x0d Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x08173e: IN OUT HP Detect Pin Default 0x90a30130: [Fixed] Mic at Int N/A Conn = ATAPI, Color = Unknown Pin-ctls: 0x24: IN Connection: 2 0x0c* 0x0d Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x08173e: IN OUT HP Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black Pin-ctls: 0x20: IN Connection: 2 0x0c* 0x0d Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x08173e: IN OUT HP Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black Pin-ctls: 0x20: IN Connection: 2 0x0c* 0x0d Node 0x1c [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black Pin-ctls: 0x00: Node 0x1d [Pin Complex] wcaps 0x400000: Mono Pincap 0x0820: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black Pin-ctls: 0x00: Node 0x1e [Pin Complex] wcaps 0x400380: Mono Digital Pincap 0x0810: OUT Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black Pin-ctls: 0x00: Connection: 1 0x06 Node 0x1f [Pin Complex] wcaps 0x400280: Mono Digital Pincap 0x0820: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black Pin-ctls: 0x00: Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Node 0x21 [Volume Knob Widget] wcaps 0x600080: Mono Node 0x22 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Amp-Out caps: N/A Amp-Out vals: [0x00 0x00] Connection: 9 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x0b Node 0x23 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Amp-Out caps: N/A Amp-Out vals: [0x00 0x00] Connection: 9 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x0b Node 0x24 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Amp-Out caps: N/A Amp-Out vals: [0x00 0x00] Connection: 9 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x0b Thx in advance! Link to comment Share on other sites More sharing options...
bronxboyXXX Posted March 7, 2008 Author Share Posted March 7, 2008 I tested it and sound was working just fine but my mic was not However the version below fixed the mic problem for me. so you should give it a shot. but if it does not work Try Toruga's alc262testing.zip and report your findings to me. alc262_100.zip alc262testing.zip Link to comment Share on other sites More sharing options...
komeet Posted March 7, 2008 Share Posted March 7, 2008 Starimage, Try this driver, It's working fine on my Q45, Ext Mic not tested, Pls reply after you tested it, Thx.This driver based on bronxboyXXX's 0.4 MadMad Beta Driver, I just edit a few node path, Thx for your great work, bronxboyXXX!!! ALC262_510_for_Q45.zip I tried your driver and it works so far exepect the issue that the internal speakers will not be turned off if I plug in the headphone jack. So internal speakers and headphone are working at the same time. Any ideas how I can change this? Thanks. Link to comment Share on other sites More sharing options...
zikman Posted March 7, 2008 Share Posted March 7, 2008 thx... However with the kext you provided mic-line out works ok... Integrated speakers dont! In Preferences i can see headphones....but volume output is disabled...so no sound from speakers Link to comment Share on other sites More sharing options...
bronxboyXXX Posted March 7, 2008 Author Share Posted March 7, 2008 I tried your driver and it works so far exepect the issue that the internal speakers will not be turned off if I plug in the headphone jack. So internal speakers and headphone are working at the same time. Any ideas how I can change this? Thanks. ill take a look into that but i can't do it now. (must fix my car & pay bills) check back in a day or two and i may have a fix. Link to comment Share on other sites More sharing options...
zikman Posted March 7, 2008 Share Posted March 7, 2008 ok...I think that the problem is with NodeID's... Thx again for your help... Link to comment Share on other sites More sharing options...
bronxboyXXX Posted March 7, 2008 Author Share Posted March 7, 2008 thx...However with the kext you provided mic-line out works ok... Integrated speakers dont! In Preferences i can see headphones....but volume output is disabled...so no sound from speakers how are the headphones working with my alc262_100 kext? Link to comment Share on other sites More sharing options...
zikman Posted March 7, 2008 Share Posted March 7, 2008 I think headphones are meant as internal speakers... And line out is actually external speakers (headphones) Line out works ok but headphones(internal speakers) dont! Link to comment Share on other sites More sharing options...
bronxboyXXX Posted March 7, 2008 Author Share Posted March 7, 2008 I think i can fix that. ill have something for you soon but i must run now. Ill know its working when my laptop starts to work like yours is now. for now choose headphones as the device for sound-output in system preferences and see if that works. Link to comment Share on other sites More sharing options...
zikman Posted March 7, 2008 Share Posted March 7, 2008 no it doesnt work...as default output Link to comment Share on other sites More sharing options...
bronxboyXXX Posted March 8, 2008 Author Share Posted March 8, 2008 no it doesnt work...as default output okay what i need is a list of what the drivers are doing to you like this. ALC262_XXX internal speakers= yes (but only after sleep) headphones= digital out= Mic= be sure to test everything b4 you move on to the next driver. Link to comment Share on other sites More sharing options...
bronxboyXXX Posted March 8, 2008 Author Share Posted March 8, 2008 give this a shot. I think the beta 0.2 will work since I believe its doing to me what its doing to you. try it and be sure to let me know what happens.. I need the input from you guys to make things work. alc262_100_beta_0.1.zip alc262_100_beta_0.2.zip Link to comment Share on other sites More sharing options...
zikman Posted March 8, 2008 Share Posted March 8, 2008 OK...For beggining My Laptop supports only internal speakers,mic and line out.(nothing more nothing less) I will describe the results of the different drivers..I will mention what i see in Sound preferences and what it works and what doesnt... OK kere we are 262_200 Line out>>>>works Headphones>>>no Internal Speakers>>>no Internal Microphone>>>works 262_400 Line out>>>works Headphones>>>no Internal Microphone>>>works 262_500 Line out>>>works Headphones>>>no Internal Microphone>>>works 262_508 Line out>>>works Headphones>>>no Internal Microphone>>>works 262_580 Line out>>>works Headphones>>>no Internal Microphone>>>works 262_800 Line out>>>works Headphones>>>no Internal Microphone>>>works 262_f00 Line out>>>works Headphones>>>no Internal Microphone>>>works 262_xxx_beta Line out>>>no (i hear a constant blip ever 3 seconds) Headphones>>>no Internal Microphone>>>works Patch with linux dump with taruga headphones>>>>no Line out>>>works (MIc arent showing up) alc262_100_beta_0.1.zip Headphones>>>no Line Out>>>>works Internal mic>>works alc262_100_beta_0.2.zip Heaphones>>>no (the output has no volume control) Line Out>>>works Internal mic>>>works In all cases internal speakers dont work....I cant sleep my machine so i dont know if speakers work after that... Thx again My linux dump is on the above post.. Whata i have to do with the txt's in the beta drivers?? Link to comment Share on other sites More sharing options...
bronxboyXXX Posted March 8, 2008 Author Share Posted March 8, 2008 Whata i have to do with the txt's in the beta drivers?? nothing i just threw them in there humm... how about the original sound drivers that were bundled with your install DVD? did any of them ever get your external speakers to work? Link to comment Share on other sites More sharing options...
zikman Posted March 8, 2008 Share Posted March 8, 2008 yeah.... Line out worked.... Link to comment Share on other sites More sharing options...
bronxboyXXX Posted March 8, 2008 Author Share Posted March 8, 2008 nothing i just threw them in there humm... how about the original sound drivers that were bundled with your install DVD? did any of them ever get your external speakers to work? i think i know whats going on. how many outputs do you have? I only have a headphone jack (aka) my line out. a Mic Input (aka) a line in. and my sound from the internal speakers (aka) internal speakers or built in speakers. and thats it how is your system? do you have two line-outs? two line-ins? a coaxial or fiber-optic connector also known as digital line out or SPDIF? Link to comment Share on other sites More sharing options...
zikman Posted March 8, 2008 Share Posted March 8, 2008 In my previous post i explained everything in each driver I have line out aka line out I have headphones (probably for internal speakers???) which dont work The system has ONE line out ONE line in and internal speakers Link to comment Share on other sites More sharing options...
bronxboyXXX Posted March 8, 2008 Author Share Posted March 8, 2008 In my previous post i explained everything in each driver I have line out aka line out I have headphones (probably for internal speakers???) which dont work The system has ONE line out ONE line in and internal speakers okay.. clear.. btw each driver has been made with your linux dump I recommend trying different taruga patchers with your dump. maybe one of them will get your internal speakers to work if any do let me know. my only other advice is to try the madman driver i made. ill still play around with it and research but while i do that give it a shot. the focus is to just get your internal speakers to work. i don't care about the rest. find a driver that will make them work. Link to comment Share on other sites More sharing options...
zikman Posted March 8, 2008 Share Posted March 8, 2008 Do you have some idea of what is going on my system? Link to comment Share on other sites More sharing options...
bronxboyXXX Posted March 8, 2008 Author Share Posted March 8, 2008 there must already be a fix for this. Link to comment Share on other sites More sharing options...
zikman Posted March 8, 2008 Share Posted March 8, 2008 madman driver doesnt work for me:( really thx... If i can contribute to something else just tell me...Should you ever needd something just tell me... Thx again for everything.... However I cant understand why sound doesnt work as expected in my crappy system... Link to comment Share on other sites More sharing options...
bronxboyXXX Posted March 8, 2008 Author Share Posted March 8, 2008 Do you have some idea of what is going on my system? its the pins to your internal speakers. its like this. all the realtek drivers use different pins your driver however could be a new reversion of the ALA262. or just configured weird by your laptop manufacture. you just need to try every single realtek dump you can get your hands on. I'm really going to look around for it because I think the fix has probably already surfaced. too many are complaining about this. also i could have screwed up on the 2.0 beta driver. So it still could also just be that the headphones and internal speakers are swapped. ill play with it some-more Link to comment Share on other sites More sharing options...
zikman Posted March 8, 2008 Share Posted March 8, 2008 its the pins to your internal speakers.its like this. all the realtek drivers use different pins your driver however could be a new reversion of the ALA262. or just configured weird by your laptop manufacture. you just need to try every single realtek dump you can get your hands on. I'm really going to look around for it because I think the fix has probably already surfaced. too many are complaining about this. Its very weird since in linux internal speakers work like a treat... So i linux dump the card and using the taruga patch dont work... Maybe there is a problem with NodeID..... I am pretty sure about this...but i dont know how to fix it:( Yeah...Internal speakers dont show up in preferences.... Only headphones are showing up Link to comment Share on other sites More sharing options...
Recommended Posts