dnoyeb Posted December 28, 2008 Share Posted December 28, 2008 sunlite, i'd just make sure and have that AHCI mode turned on in the bios... might actually want to do a "reset defaults" in the bios... I am pretty sure the 4 1530's we did at work all were pure default. Link to comment Share on other sites More sharing options...
macgirl Posted December 28, 2008 Author Share Posted December 28, 2008 So do you want to use the 10.5.6 Vanilla AppleHDA? Se here: http://forum.insanelymac.com/index.php?s=&...t&p=1017558 Note: for STAC 9228 only. Link to comment Share on other sites More sharing options...
pipolas Posted December 29, 2008 Share Posted December 29, 2008 Hello,I have a dell vostro 1700 with, actually, osx leopard 10.5.5. with boot132. I would like to use leopard 10.5.6, so I installed pcefi v9. The problem is that the system boot, and it hangs after "wake kernel ! ". When I put the option " -v" or "-x", always the same problem. Where is the problem? Thank you very much. Up please. I can only boot with the boot132 CD... Link to comment Share on other sites More sharing options...
DrFruit Posted December 29, 2008 Share Posted December 29, 2008 @ Macgirl. Just a quick one, i have been getting my 1720 up and running, so far i have everything working except shutdown/restart (as we all know). Would you like me to submit my procedure so far or just create a new thread specifically for the 1720? Most of the steps are made up of other members tips but i thought it would be good to put it all in one place for others to get their 1720`s up and running in one go? cheers, Link to comment Share on other sites More sharing options...
wingrunr21 Posted December 29, 2008 Share Posted December 29, 2008 Hello,I have a dell vostro 1700 with, actually, osx leopard 10.5.5. with boot132. I would like to use leopard 10.5.6, so I installed pcefi v9. The problem is that the system boot, and it hangs after "wake kernel ! ". When I put the option " -v" or "-x", always the same problem. Where is the problem? -nowake is the option you need. I think netkas said that deep sleep still has some issues so I'd avoid using hibernate if possible. Link to comment Share on other sites More sharing options...
macgirl Posted December 29, 2008 Author Share Posted December 29, 2008 @ Macgirl. Just a quick one, i have been getting my 1720 up and running, so far i have everything working except shutdown/restart (as we all know). Would you like me to submit my procedure so far or just create a new thread specifically for the 1720? Most of the steps are made up of other members tips but i thought it would be good to put it all in one place for others to get their 1720`s up and running in one go? cheers, I think you can make a new thread for 1720, there is one on the tutorials, having another give users the power of choice. I setup a pair of 1720 or 1725, and some Precisions for a friends, and since this came more frequent than before I created an Image of and Disk (Mac OS Installed on a real Mac, and upgraded to the latets update) so I can restore the image to the disk of a new machine and later put all the specific kext it needs. I even ende buying a craddle tha can hold SATA disks (2.5 and 3.5) that has a converter to USB, but also you can useit as External SATA. Link to comment Share on other sites More sharing options...
sammydavis Posted December 29, 2008 Share Posted December 29, 2008 Can someone help me with Time Machine on m1330? I get the disk not found error. I have read that ethernet may have to function to get Time machine to work but I have seen sone xps users are using it. Link to comment Share on other sites More sharing options...
wingrunr21 Posted December 29, 2008 Share Posted December 29, 2008 Google "Time Machine fix" Link to comment Share on other sites More sharing options...
sammydavis Posted December 30, 2008 Share Posted December 30, 2008 I applied IONetworkingFamily installer and fixed permissions after the installer ran, my drive still wouldn't connect. Any suggestions? other than the ever helpful google suggestion? Is this the fix? Sounds like you need the moddified IONetworkingFamily.kext by ToH. Here it is... http://www.megaupload.com/?d=HWVMONUU After placing it it /System/Library/Extensions sudo -s *password* rm -rf /System/Library/Extensions.mkext chmod -R 755 /System/Library/Extensions/IONetworkingFamily.kext chown -R root:wheel /System/Library/Extensions/IONetworkingFamily.kext reboot, and keep your fingers crossed HTH, The Baron Link to comment Share on other sites More sharing options...
wingrunr21 Posted December 30, 2008 Share Posted December 30, 2008 I applied IONetworkingFamily installer and fixed permissions after the installer ran, my drive still wouldn't connect. Any suggestions? other than the ever helpful google suggestion? You would be surprised how many people skip that "ever helpful" step. Yes that is the fix. Make sure you back up your original IONetworkingFamily kext first. Link to comment Share on other sites More sharing options...
sammydavis Posted December 30, 2008 Share Posted December 30, 2008 I tried that fix, no luck. I'll try again. No experience with sudo. I tried that fix, no luck. I'll try again. No experience with sudo. Link to comment Share on other sites More sharing options...
newtoOSX86 Posted December 30, 2008 Share Posted December 30, 2008 ok so last question i hope... i googled this as well, but couldnt find any actual help. I have just gotten my dell 1390 wifi card in the mail, and i installed it in my second mini pci express slot. Supposedly this was "just supposed to work" with the m1330- but when i booted into osx it showed up as a "third party device" instead of an airport extreme. The device is recognized by osx but it wont let me turn it on. The device always remained "turned off" and the turn on button is nonresponsive. Is this an issue with having both wifi cards installed at the same time? Has anyone had experience with this, and/or has any insight? Link to comment Share on other sites More sharing options...
DrFruit Posted December 30, 2008 Share Posted December 30, 2008 ok so last question i hope... i googled this as well, but couldnt find any actual help. I have just gotten my dell 1390 wifi card in the mail, and i installed it in my second mini pci express slot. Supposedly this was "just supposed to work" with the m1330- but when i booted into osx it showed up as a "third party device" instead of an airport extreme. The device is recognized by osx but it wont let me turn it on. The device always remained "turned off" and the turn on button is nonresponsive. Is this an issue with having both wifi cards installed at the same time? Has anyone had experience with this, and/or has any insight? You need to provide more specific information about your build so far e.g. what release of osx are you using, what have you done with kexts etc since installation (if you have made lots of changes etc then it's harder to help you solve your issue). Check back through this thread as i myself have had similar issues and managed to solve, i have posted my findings on this thread so read back and check. cheers, Link to comment Share on other sites More sharing options...
wingrunr21 Posted December 30, 2008 Share Posted December 30, 2008 new: make sure you have the cell phone option enabled in the BIOs/try it in the other slot. sammy: sudo gives you root access for modifying system files. Link to comment Share on other sites More sharing options...
sammydavis Posted December 30, 2008 Share Posted December 30, 2008 Yeah I figured out what sudo does, I just get errors. after sudo -s I get to password. I enter mine and the next line is then bash-3.2# I enter after it the rm -rf/sytem/Library/Extensions.mkext line and get rm:illegal option usage: rm [-f -i] [dPRrvW]file... unlink file I am assuming I have not produced a good result. I tried the osx86tools fix and it didn't work either. The add efi strings, ethernet strings and apply changes to com.apple.Boot option. I may need to hand this off to a specialist if i want TM to work. Link to comment Share on other sites More sharing options...
DrFruit Posted December 30, 2008 Share Posted December 30, 2008 you need a space between rf and the path e.g. rm -rf/sytem/Library/Extensions.mkext rm -rf /sytem/Library/Extensions.mkext cheers, Link to comment Share on other sites More sharing options...
sammydavis Posted December 30, 2008 Share Posted December 30, 2008 Thanks Dr Fruit, that got me through the terminal without errors but still no love with my time machine. no backup volume found. Link to comment Share on other sites More sharing options...
DrFruit Posted December 30, 2008 Share Posted December 30, 2008 Have you plugged anything into the ethernet port? I wasnt using ethernet at all just wireless but until i connected the machine via ethernet to the router just the once then my TM backup worked from then on.. Also check to see if the devices are listed in the networking section of preferences, until you can confirm that your ethernet is working in osx, time machine will not work. cheers, Link to comment Share on other sites More sharing options...
sammydavis Posted December 30, 2008 Share Posted December 30, 2008 Thanks again for the reply Dr. From what I have read. there is no ethernet fix yet for xps m1330. I have connected it to my router, but no luck with that. More reading for me. Link to comment Share on other sites More sharing options...
McPhil Posted December 30, 2008 Share Posted December 30, 2008 i dont suppose any dell vostro 1400 users here have gotten full working audio on their sigmatel 9228's have they? Link to comment Share on other sites More sharing options...
darth_maur Posted December 31, 2008 Share Posted December 31, 2008 finally i get my dell 1420 working. I use iAtkos 5i. I have x3100 graphic card. Doesn't work wifi audio and another stuff. i use chamaleon ps2 kext Toh kernel smbios efi-air well when i have more time cheking i will put more details. thanks to all, reading this line i can know what to do. Link to comment Share on other sites More sharing options...
wildseal2003 Posted December 31, 2008 Share Posted December 31, 2008 can someone tell me what doesnt work on the inspiron 1520? Link to comment Share on other sites More sharing options...
sammydavis Posted December 31, 2008 Share Posted December 31, 2008 just upgraded to 10.5.6, thanks wingrunner for your guide, it went smoothly. Still no time machine though. Maybe if and when an ethernet fix is done it will work. Link to comment Share on other sites More sharing options...
newtoOSX86 Posted December 31, 2008 Share Posted December 31, 2008 wingunnr = genius!! --- great suggestion man, you solved my wifi issue, thank you sooooo much. currently a happy owner of my dellbook pro. Only things left for full support ethernet internal mic sleep/restart (still working on getting two finger scrolling to work) (still working on getting the perfect powermanagement schemes to get the 2.5 hours of batt that vista gets (i only get about 2.0 hours with osx) And thats it!!! thanks again guys Link to comment Share on other sites More sharing options...
wildseal2003 Posted December 31, 2008 Share Posted December 31, 2008 i just installed iatkos v5 in my partitioned drive. im on dell 1520 btw. after it finished installing it needed to restart and when it restarted it said boot 0 error. and i cant boot into xp or osx. what now? Link to comment Share on other sites More sharing options...
Recommended Posts