CardBus/PCMCIA PC Cards for Leopard

[~Eureka]

Hi to all....

 

I own an Acer Aspire 5630 & have installed Kalyway's Leopard 10.5.1 (works fine except wifi, CardBus & PCMCIA slot)

I have downloaded the file in this topic: ...

 

Replaced the original files & after reboot I got KP.... Take a look at the picture and tell me what to do now ;(

 

Hi muratif,

 

It seems that the file permissiones were not set correctly. Double-check it.

In addition, after checking the permissions, you can use "touch /System/Library/Extensions" under terminal to make sure the cache is changed, too.

 

Or

 

Try PCCard.10.5.2.beta3 installation package.

 

Chun-Nan

 

=====

Hi to all! I've a Laptop HP Compaq 8710w with Leopard 10.5.2 installed, after the installation i cant use my PCCARD so i searched on this forum the solution..I've installed IOPCCardFamily_chunnan_Leopard_rev8.zip ( i tryed also the other releases ) but once installed i have a kernel panic, so restarting with -f option i solve the problem and i have my pccard perfect functionally. The problem now is that for start the computer i always have to put the -f option.. Any suggestion? Sorry for my english..

 

Hi superpiero,

 

You can use "touch /System/Library/Extensions" under terminal to make sure the cache is changed, too.

 

Or

 

Try PCCard.10.5.2.beta3 installation package.

 

Chun-Nan

=====

Chunnan, really appreciate your efforts. Thanks very much.

I have followed the instructions and got rev8. My dmesg shows this:

 

 

 

And, here is the info I gathered about my device:

 

 

Hopefully, you can help me out here. Thanks.

 

Hi vja,

 

You can give PCCard.10.5.2.beta3 installation package a try to see if the error goes away.

 

Chun-Nan

=====

update. I have the Card on:

| | | +-o PXS1@0 <class IOPCIDevice, registered, matched, active, busy 0, retain 6>

 

working and Stable,

But Still no Wifi ;(

 

Hi HBP112358,

 

You can give PCCard.10.5.2.beta3 installation package a try to see if the error goes away.

 

Chun-Nan

=====

Hi Chun-nan and all, now i'm using leo4all v2 in my BenQ Joybook S41-448. I have problem with my wireless lan(Atheros AR 5006EG), i tried anything to make it's work, but until now it's still not working. I used Chun-nan version, the LAN card working perfectly, but the WiFi still not working. In the boot i see this error message

 

 

 

What it's mean?

 

Any one can help me, please?

 

Sorry for my english

 

Thx B4

Hi Hendry Lai,

 

You can give PCCard.10.5.2.beta3 installation package a try to see if the error goes away.

 

Chun-Nan

=====

Could it be that Chun-Nan drivers don't work on a PPC computer? I would be very grateful if someone could help me since I really need my wireless card to work.

 

Thank you,

 

Guido

 

Hi coccoinomane,

 

I don't think it will work on the PPC computer. I use the source code for Intel computers on Apple's website.

 

Chun-Nan

=====

Hello, Chun-Nan,

 

Thank you for your PCMCIA/Cardbus reader! I was able to install it using the beta2 on post#502 and was able to improve my boot time from 5-6 mins down to 1 min. The reason was that previous to the PCMCIA driver you provided, the unknown device stalled the boot process.

 

My laptop comes with a CardBus RICOH RL5C476, which appears to be supported under your list on the top page. However, when I connect a memory card (SD) I get the following errors in /var/log/system.log, and the card is not detected:

 

.....

 

Do you know why this is?

 

Thanks,

 

blivrail

 

Hi blivrail,

 

As far as I know, it means that it found the device but couldn't find the driver for it.

What kind of card reader do you have? Is it PCMCIA/CardBus interface?

 

Chun-Nan

[coccoinomane]

....

 

Hi coccoinomane,

 

I don't think it will work on the PPC computer. I use the source code for Intel computers on Apple's website.

 

Chun-Nan

 

...

 

Hi Chun-Nan,

 

thank you for the answer. I solved my problem buying an USB wireless key (D-Link DWA-110) which works perfectly on my PowerBook Titanium USB 1.1 ports.

 

Ciao,

 

Guido

[Hacktrix2006]

Chun beta 3 froze my osx86 install out. says about ionetwork in the error. Do you have any ideas on getting the ricoh card device working. I'll send you the IDs tomorrow.

[Hacktrix2006]

HI CHUN here is the IDS for the laptop SD reader.

 

07:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22)

 

07:01.2 System peripheral [0880]: Ricoh Co Ltd Unknown device [1180:0843] (rev 12)

 

07:01.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12)

 

07:01.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 12)

[muratif]

Hi Chun-Nan, thank u for ur answer...!!!

I would try the beta if I could get back my OSX... it's stuck on start us... I saw a guy wrote something about a function "-f"

How to do that? Do I need my installation DVD?

 

Thank u!

[truongsg]

HI CHUN

 

These are the IDS for the laptop SD reader

05:09.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19)

05:09.2 System peripheral [0880]: Ricoh Co Ltd Unknown device [1180:0843] (rev 01)

05:09.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 0a)

05:09.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 05)

[pere]

Hi to all!

Sony vaio cr11z/r here.

 

 

I have installed the beta3, on load seems to recognize everything including firewire port , but once on leopard i find that the firewire port is not recognized by the system and not working obviously...

How can i add my firewire id to the kexts to be properly configured?.

 

Here is my hardware ids:

00:00.0 Host bridge [0600]: Intel Corporation Mobile Memory Controller Hub [8086:2a00] (rev 0c)

00:01.0 PCI bridge [0604]: Intel Corporation Mobile PCI Express Root Port [8086:2a01] (rev 0c)

00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03)

00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03)

00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 03)

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3)

00:1f.0 ISA bridge [0601]: Intel Corporation Mobile LPC Interface Controller [8086:2815] (rev 03)

08:07.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039]

08:07.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a]

08:07.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]

 

 

Thanks for your work and time.

[~Eureka]

Hi to all!

Sony vaio cr11z/r here.

 

 

I have installed the beta3, on load seems to recognize everything including firewire port , but once on leopard i find that the firewire port is not recognized by the system and not working obviously...

How can i add my firewire id to the kexts to be properly configured?.

 

.....

 

Thanks for your work and time.

 

Hi pere,

 

I saw you have TI chip for your pccard and firewire controller. It is kinda known issue.

 

You can try to move IOPCCardFamily outside Extensions (to '/' for example), repair premissions of IOPCCardFamily, reboot, and see if firewire works. If firewire works, then 'kextload /IOPCCardFamily.kext' from terminal (sudo -s mode).

 

Chun-Nan

[pere]

Thanks! I try right now.

 

Ok, i moved IOPCCardfamily to /

Repaired its permissions.

Rebooted, then firewire loaded correctly

Then loaded from terminal the kext and got this:

28/05/08 21:13:19 kernel IOPCCardBridge::start failed

[mentorek]

Hi Chun-Nan,

 

Could you please release a version of IOPCIFamily.kext which would work with 10.5.3 update? I seem to be missing that one...

If the beta3 would work please put it here as a file (not an installer or something).

 

Thanks,

Mik

[~Eureka]

Thanks! I try right now.

 

Ok, i moved IOPCCardfamily to /

Repaired its permissions.

Rebooted, then firewire loaded correctly

Then loaded from terminal the kext and got this:

28/05/08 21:13:19 kernel IOPCCardBridge::start failed

 

Hi pere,

 

You still need to use IOPCCardFamily and IOPCIFamily from beta3 or it won't work.

 

Chun-Nan

 

=====

Hi Chun-Nan,

 

Could you please release a version of IOPCIFamily.kext which would work with 10.5.3 update? I seem to be missing that one...

If the beta3 would work please put it here as a file (not an installer or something).

 

Thanks,

Mik

 

Hi mentorek,

 

I have tried beta3 installer with 10.5.3 and it works fine.

I have uploaded kext file for beta3 on the 1st post. http://forum.insanelymac.com/index.php?showtopic=81036

 

Chun-Nan

[applehacker]

sorry to be a nudge, but will there be any support for misconfigured mini pci e ports? ACPI, BIOS, and a bit of OS X brews a whole lot of misconfiguration.

[pere]

"Hi pere,

 

You still need to use IOPCCardFamily and IOPCIFamily from beta3 or it won't work.

 

Chun-Nan"

 

I used them...

I kept IOPCCard family from beta3 under extensions folder and mover IOPCIfamily from beta3 to my hd root and loaded it, then appeared that mesage.

You are right.... i was using the original one. Sorry. Now loads correctly but once its loaded the issue with firewire appears again.

 

[santoz]

hi people i'm exhausted to try the solution for PCMCIA card's in kaleway 10.5.2

i try with rev8 and your last beta ktext but my kernel start in panic , i tried to do this in a laptop HP 530

 

the ID of my PCMCIA reader is

PCI\VEN_1524&DEV_1410&SUBSYS_30D5103C&REV_01

PCI\VEN_1524&DEV_1410&SUBSYS_30D5103C

PCI\VEN_1524&DEV_1410&CC_060700

PCI\VEN_1524&DEV_1410&CC_0607

 

and the ID device card that am it try to connect is

 

PCI\VEN_1106&DEV_3044&SUBSYS_30441106&REV_46

PCI\VEN_1106&DEV_3044&SUBSYS_30441106

PCI\VEN_1106&DEV_3044&CC_0C0010

PCI\VEN_1106&DEV_3044&CC_0C00

 

this card is a Conceptronic PCMCIA firewire adapter

 

thx for your time

see you santoz

[THe KiNG]

Hi pere,

 

I saw you have TI chip for your pccard and firewire controller. It is kinda known issue.

 

You can try to move IOPCCardFamily outside Extensions (to '/' for example), repair premissions of IOPCCardFamily, reboot, and see if firewire works. If firewire works, then 'kextload /IOPCCardFamily.kext' from terminal (sudo -s mode).

 

Chun-Nan

Hi Chun-Nan!

Seems that i have the same configuration/problems like pere, but not the same lappie I have BenQ R55v...and you say that It is kinda known issue.

I did what you told and after restart IOPCCardFamily.kext seems to be loaded fine from terminal, also all are ok in system profiller, now what to do next?

Can this issue be fixed?

If u need me for "live" tests you can finde me on irc as XyZ

 

Thanks again for your work!

 

Here is my dump from terminal:

bash-3.2# kextload /IOPCCardFamily.kext 
kextload: /IOPCCardFamily.kext loaded successfully
bash-3.2# lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port [8086:27a1] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02)
00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02)
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02)
01:00.0 VGA compatible controller [0300]: nVidia Corporation G72M [GeForce Go 7400] [10de:01d8] (rev a1)
02:00.0 Ethernet controller [0200]: Atheros Communications, Inc. AR5006EG 802.11 b/g Wireless PCI Express Adapter [168c:001c] (rev 01)
04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 10)
05:01.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039]
05:01.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a]
05:01.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]
05:01.3 SD Host controller [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c]

 

Ohh I forgot...sometimes with both files on place my system just freeze on boot and dosent go to gui with this message:

"PM configd[35] Error: ioPublishedDriverCallback() failed to initDeviceFromService()", dunno what cause this...it is a random crush

 

For applehacker look here:

Try Superhai AppleSmbios.kext and the rest...--> www.superhai.com BTW Thanks Superhai

 

Ohh I almost forgot I'm on 10.5.3 also:

Joybook R55v CPU: Mobile Intel Core Duo CPU T2400 @ 1.83GHz [sSE3/PAE/XD/EST/VMX/DualCore] L2 Cache: 2MB FSB: 664MHz RAM Usage: 578.0MB/2.0GB [❙❙❙❙❙❙❙❙❙❙] Virtual: 0.00MB/64.00MB Disk Usage: 40.43GB/63.64GB Battery: 0.1% Display: GeForce 7400 Go [128 MB/QE/CI] 1280x800 Audio: Azalia OS: Mac OS X 10.5.3 (9D34)

[spacklewoof]

Hi Chu-Nan,

Is there a whitelist in the IOPCCardFamily.kext? I'm currently working on the nvidia shared memory video drivers and there appears to be a lookup table of PCI Id's in IOPCCardFamily.kext that correspond to video cards. I am running v8b2 of your kexts (dated 28-05-2008).

 

What specifically I am referring to is an occurence of 0x0244 inside IOPCCardFamily at offset 0x303ce inside the executable. The surrounding code to me looks like a lookup table.

 

Thank you for your time,

 

-w00f

[jul_k]

hi Chun-Nan!

 

I can't tell how greatfull I am for your work and this thread!!

 

I have 2 pcmcia cards and some issues with them.

 

The first is a delock usb adaptor, that gets recognized and pluging an usb-HD works ok.

but if i plug my usb soundcard to it doesn't load. leds on the soundcard go on but don't show as ready to work.

further unplugging the delock card makes the system freeze!

 

The second one is a d-link ethernet adaptor, that is showing in system profiler, but I don't get it as a network option.

booting up with this card causes KP while the other one doesn't!

unplugging the d-link one doesn't affect the system! funny!

 

I have a toshiba satellite A100 with TI PCIxx12 cardbus controller, kalyway 10.5.1+update

vanilla kernel and use IOPCcardfamily rev8.

 

help would be very very much appreciated!

regards

[Monofrio]

hello,

 

Can someone please make some kind of dummy guide. I am totally lost and my eyes hurt from reading all these posts.

 

I have a dv5000 series HP laptop, dual booting with windows vista and iatkos v2.0.

 

Here is my issue...

None of my usb ports work, I cant get my iphone or any other device recoginized. I would really like to get my usb ports working or at least in detial how to get my PCMCIA port working as I have a usd firewire card I can use untill my usb ports are fixed.

 

To mention: I have no control for legacy USB or plug and play settings in the BIOS.

 

here are some of my USB specs if anyone has any ideas I would really appreciate the help.

 

00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01)

00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01)

00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01)

00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01)

00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01)

 

 

 

these are the following errors:

43.858 EHCI Controller unable to take control from bios

43.868 AppleUSBEHCI[0x262e800]: unable to obtain ownership: 0x00002be

43.872 AppleUSBEHCI[0x262e800]: :UIMInitializing -error occurred (0x00002be)

43.897 AppleUSBEHCI[0x262e800]: :UIMfinialize inInactive(8) _pEHCIRegisters(0)

43.910 AppleUSBEHCI : unable to initializing UIM

PCCardBridge: :start failed

[~Eureka]

Chun beta 3 froze my osx86 install out. says about ionetwork in the error. Do you have any ideas on getting the ricoh card device working. I'll send you the IDs tomorrow.

 

Hi Hacktrix2006,

 

You need another drivers to make the card reader device work.

 

Chun-Nan

 

HI CHUN

 

These are the IDS for the laptop SD reader

05:09.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19)

05:09.2 System peripheral [0880]: Ricoh Co Ltd Unknown device [1180:0843] (rev 01)

05:09.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 0a)

05:09.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 05)

 

Hi Thanh Truong,

 

You need another drivers to make the card reader device work.

 

 

sorry to be a nudge, but will there be any support for misconfigured mini pci e ports? ACPI, BIOS, and a bit of OS X brews a whole lot of misconfiguration.

 

Hi applehacker,

 

I wish I could help you but I don't have the same notebook you have.

 

Chun-Nan

 

"Hi pere,

 

You still need to use IOPCCardFamily and IOPCIFamily from beta3 or it won't work.

 

Chun-Nan"

 

I used them...

I kept IOPCCard family from beta3 under extensions folder and mover IOPCIfamily from beta3 to my hd root and loaded it, then appeared that mesage.

You are right.... i was using the original one. Sorry. Now loads correctly but once its loaded the issue with firewire appears again.

 

 

Hi pere,

 

You need to make sure that IOPCCardFamily needs to kextloaded after IOPCIFamily.

 

Chun-Nan

 

hi people i'm exhausted to try the solution for PCMCIA card's in kaleway 10.5.2

i try with rev8 and your last beta ktext but my kernel start in panic , i tried to do this in a laptop HP 530

 

the ID of my PCMCIA reader is

PCI\VEN_1524&DEV_1410&SUBSYS_30D5103C&REV_01

PCI\VEN_1524&DEV_1410&SUBSYS_30D5103C

PCI\VEN_1524&DEV_1410&CC_060700

PCI\VEN_1524&DEV_1410&CC_0607

 

and the ID device card that am it try to connect is

 

PCI\VEN_1106&DEV_3044&SUBSYS_30441106&REV_46

PCI\VEN_1106&DEV_3044&SUBSYS_30441106

PCI\VEN_1106&DEV_3044&CC_0C0010

PCI\VEN_1106&DEV_3044&CC_0C00

 

this card is a Conceptronic PCMCIA firewire adapter

 

thx for your time

see you santoz

 

Hi santoz,

 

You can try PCCard.10.5.2.beta3 installation package.

 

Chun-Nan

 

Hi Chun-Nan!

Seems that i have the same configuration/problems like pere, but not the same lappie I have BenQ R55v...and you say that It is kinda known issue.

I did what you told and after restart IOPCCardFamily.kext seems to be loaded fine from terminal, also all are ok in system profiller, now what to do next?

Can this issue be fixed?

If u need me for "live" tests you can finde me on irc as XyZ

 

Thanks again for your work!

 

.....

 

Hi iullius,

 

May rewriting the whole pccard driver would fix the issue since Apple uses the old pccard driver (ported from 3.1.22).

 

Chun-Nan

 

Hi Chu-Nan,

Is there a whitelist in the IOPCCardFamily.kext? I'm currently working on the nvidia shared memory video drivers and there appears to be a lookup table of PCI Id's in IOPCCardFamily.kext that correspond to video cards. I am running v8b2 of your kexts (dated 28-05-2008).

 

What specifically I am referring to is an occurence of 0x0244 inside IOPCCardFamily at offset 0x303ce inside the executable. The surrounding code to me looks like a lookup table.

 

Thank you for your time,

 

-w00f

 

Hi spacklewoof,

 

Sorry that I don't quite understand the issue. Can you explain it more?

 

Chun-Nan

 

hi Chun-Nan!

 

I can't tell how greatfull I am for your work and this thread!!

 

I have 2 pcmcia cards and some issues with them.

 

The first is a delock usb adaptor, that gets recognized and pluging an usb-HD works ok.

but if i plug my usb soundcard to it doesn't load. leds on the soundcard go on but don't show as ready to work.

further unplugging the delock card makes the system freeze!

 

The second one is a d-link ethernet adaptor, that is showing in system profiler, but I don't get it as a network option.

booting up with this card causes KP while the other one doesn't!

unplugging the d-link one doesn't affect the system! funny!

 

I have a toshiba satellite A100 with TI PCIxx12 cardbus controller, kalyway 10.5.1+update

vanilla kernel and use IOPCcardfamily rev8.

 

help would be very very much appreciated!

regards

 

Hi jul_k,

 

Which version of IOPCCardFamily package are you using now? You can try PCCard.10.5.2.beta3 installation package to see if it makes difference.

 

Does your usb soundcard work on the regular usb port? You probably need to find the right drivers for the wireless work.

 

Chun-Nan

[santoz]

hi Chun-Nan thx for your attention , i tried PCCard.10.5.2.beta3 and nothing , the kernel stay in panic when i install the IOPCIFamily i gonna try to use your ktext with the update 10.5.3 , but if you have other idea to try tell me plz

when i test only the IOPCCardFamily.kext the kernel don´t start in panic but don't have any signal for pcmcia , he show me PCMCIA : start failed

thx and give me some news plz

best regards

[jul_k]

Hi jul_k,

 

Which version of IOPCCardFamily package are you using now? You can try PCCard.10.5.2.beta3 installation package to see if it makes difference.

 

Does your usb soundcard work on the regular usb port? You probably need to find the right drivers for the wireless work.

 

Chun-Nan

 

Hi Chun-Nan and thx for replying!

 

I've already tried PCCard.10.5.2beta3 before and ended with kernlpanic, but this time I managed getting it to work using the -f flag!

here I get except, intead of os-freeze when unplugging the delock card -> KP, the same behaviour!

 

I wanted to get the setup I had before, namely vanilla PCIfamily.kext and your PCCardfamily.kext dated with jannuary 2008(from rev.8), but it didn't work!! I backuped properly and replaced properly with permission, deleting .mkext and touch ...!

I'll have to do what I did last time when I installed PCCard.beta3! -> fresh install I really don't mind! Do you know a reason for this? is it because of using the installer?

 

btw. replacing both files from rev.8 doesn't work for me!

 

My d-link card is a usual gigabit ethernet conroller and not wireless, just in case it would make any difference, and finding a driver makes totally sense but I don't care about this!

 

WHAT really is important to me is the soundcard!

yes it works plugging it to the native usb port.

How could I get it loading through the pcmcia-card?

why isn't it automatically loading like e.g the usb HD?

 

thank you again and my appreciations!

[proosje]

Chun Nan,

 

I had my PCMCIA with IBM microdrive working on kalyway 10.5.2 with your Rev 8 installer.

 

After updating to 10.5.3 witth the Kalyway combo updater my system is working, but the pcmcia doesn't anymore.

After reapplying the rev8 version and repairing permissions I get a kp at bootup. sorry no pics.

 

Could only boot via dvd and restore from there the original kexts, so PCMCIA not working anymore.

 

Is there a version already for Leopard 10.5.3 ??

[~Eureka]

hi Chun-Nan thx for your attention , i tried PCCard.10.5.2.beta3 and nothing , the kernel stay in panic when i install the IOPCIFamily i gonna try to use your ktext with the update 10.5.3 , but if you have other idea to try tell me plz

when i test only the IOPCCardFamily.kext the kernel don´t start in panic but don't have any signal for pcmcia , he show me PCMCIA : start failed

thx and give me some news plz

best regards

 

Hi santoz,

 

If possible, can you post kernal panic picture on the forum? Thanks.

 

Chun-Nan

 

Hi Chun-Nan and thx for replying!

 

I've already tried PCCard.10.5.2beta3 before and ended with kernlpanic, but this time I managed getting it to work using the -f flag!

here I get except, intead of os-freeze when unplugging the delock card -> KP, the same behaviour!

 

I wanted to get the setup I had before, namely vanilla PCIfamily.kext and your PCCardfamily.kext dated with jannuary 2008(from rev.8), but it didn't work!! I backuped properly and replaced properly with permission, deleting .mkext and touch ...!

I'll have to do what I did last time when I installed PCCard.beta3! -> fresh install I really don't mind! Do you know a reason for this? is it because of using the installer?

 

btw. replacing both files from rev.8 doesn't work for me!

 

My d-link card is a usual gigabit ethernet conroller and not wireless, just in case it would make any difference, and finding a driver makes totally sense but I don't care about this!

 

WHAT really is important to me is the soundcard!

yes it works plugging it to the native usb port.

How could I get it loading through the pcmcia-card?

why isn't it automatically loading like e.g the usb HD?

 

thank you again and my appreciations!

 

Hi jul_k,

 

If you can boot with "-f" and don't get KP, it usually means the file permissions are not set correctly or the kextcache is not updated. Double check it.

 

If rev8 doesn't work with you, you can try beta3.

 

You may try another usb drivers to see if your usb sound card will work via USB PCCard.

 

If you still get KP, can you post kernal panic picture on the forum if possible? Thanks.

 

Chun-Nan

 

Chun Nan,

 

I had my PCMCIA with IBM microdrive working on kalyway 10.5.2 with your Rev 8 installer.

 

After updating to 10.5.3 witth the Kalyway combo updater my system is working, but the pcmcia doesn't anymore.

After reapplying the rev8 version and repairing permissions I get a kp at bootup. sorry no pics.

 

Could only boot via dvd and restore from there the original kexts, so PCMCIA not working anymore.

 

Is there a version already for Leopard 10.5.3 ??

 

Hi proosje,

 

Try beta3 and it should work on 10.5.3.

 

If you still get KP, can you post kernal panic picture on the forum if possible? Thanks.

 

Chun-Nan

[Thomas Morus]

Hi Chun-Nan,

 

Thanks for your work!

 

I´ve installed the 2 kexts via install package. My firewire, linked to the PCI bridge (a 02micro device) is working now, but the same did not happen to my card reader. With "ioreg -bls" I get the following result with some devices:

 

+-o CRDH@4,2 <class IOPCIDevice, registered, matched, active, bu$

| | | | {

| | | | "IOPCIResourced" = Yes

| | | +-o CRDH@4,2 <class IOPCIDevice, registered, matched, active, bu$

| | | | {

| | | | "IOPCIResourced" = Yes

| | | | "IOInterruptControllers" = ("io-apic-0")

| | | | "IOName" = "pci1217,7120"

| | | | "subsystem-id" = <7b900000>

| | | | "IODeviceMemory" = (({"address"=18446744073443223552,"lengt$

| | | | "class-code" = <00050800>

| | | | "IOPowerManagement" = {"CurrentPowerState"=2}

| | | | "revision-id" = <01000000>

| | | | "IOInterruptSpecifiers" = (<1200000007000000>)

| | | | "assigned-addresses" = <1022068200000000002820f000000000000$

| | | | "IOChildIndex" = 2

| | | | "device-id" = <20710000>

| | | | "vendor-id" = <17120000>

| | | | "acpi-path" = "IOACPIPlane:/_SB/PCI0@0/PCIB@1e0000/CRDH@400$

| | | | "subsystem-vendor-id" = <84150000>

| | | | "name" = "pci1217,7120"

| | | | "reg" = <00220600000000000000000000000000000000001022060200$

| | | | "compatible" = <"pci1584,907b","pci1217,7120","pciclass,080$

| | | | }

| | | |

| | | +-o CRDS@4,3 <class IOPCIDevice, registered, matched, active, bu$

| | | | {

| | | | "IOPCIResourced" = Yes

| | | | "IOInterruptControllers" = ("io-apic-0")

| | | | "IOName" = "pci1217,7130"

| | | | "subsystem-id" = <7b900000>

| | | | "IODeviceMemory" = (({"address"=18446744073443217408,"lengt$

| | | | "class-code" = <00800100>

| | | | "IOPowerManagement" = {"CurrentPowerState"=2}

| | | | "revision-id" = <01000000>

| | | | "IOInterruptSpecifiers" = (<1200000007000000>)

| | | | "assigned-addresses" = <1023068200000000001020f000000000001$

| | | | "IOChildIndex" = 3

| | | | "device-id" = <30710000>

| | | | "vendor-id" = <17120000>

| | | | "acpi-path" = "IOACPIPlane:/_SB/PCI0@0/PCIB@1e0000/CRDS@400$

| | | | "subsystem-vendor-id" = <84150000>

| | | | "name" = "pci1217,7130"

| | | | "reg" = <00230600000000000000000000000000000000001023060200$

| | | | "compatible" = <"pci1584,907b","pci1217,7130","pciclass,018$

| | | | }

 

"dmesg" doesn´t give any hint to me...

 

I´ve tried to add the devices listed (7130 and 7120) using an ex-editor but nothing has changed...

 

Any help? Thanks...

[proosje]

Chun Nan,

 

I tried the beta 3 package and this gets rid of the KP but now the microdrive doesn't show on the desktop anymore.

It gives its name still in the PCMCIA icon on top right. Greyed out (but that was the same on 10.5.2 with rev8) and an option to power off the card. (also the same on 10.5.2 with rev8)

The card doesn't show up in system profiler also with it did on 10.5.2

 

How can i get the card recognised by the system?

It worked fine before.

 

If you need logs or ioregtree logs please direct me how to create them.

Then I wil post them.

Hope you can help.