CardBus/PCMCIA PC Cards for Leopard

[Jim Fish]

Hi Mitch_de,

 

You were correct in that the kalway AppleACPIPlatform.kext from the DVD was already patched or it had come from somewhere else on my system. Mine was 693162 bytes and reported V1.0.3.

 

So I tried the orig. Apple AppleACPIPlatform.kext from the Apple 10.5.2 Combo Update showing: 582961 Bytes, Version 1.2.1)

 

Now my system is not starting at all - I get a "You need to restart your computer. Hold down the power button for serveral seconds" error. I guess I will have to boot from the DVD and puit the original one back.

 

Thanks for the idea anyway.

 

Regards, Jim

[EqUaTe]

Jim: You should always boot with -v

 

Are you sure you installed the kext correctly? And had you previously updated to 10.5.2 ?

What hardware do you have?

 

 

 

I've attached the beta2 kext installer here, as per the latest release from Chun-Nan. I'll leave him to post details of what's changed

This replaces ONLY IOPCIFamily and IOPCCardFamily.

I'll be doing a stock kext thing later.

 

 

For reference, what release is everyone using?

 

 

 

PCCard.10.5.2.Beta2.pkg.zip

[~Eureka]

Hi all,

 

Many thanks to EqUaTe for the installation package.

 

Here is the beta2 PCCard Package for 10.5.2. In this edition, IOPCIFamily will try to fix devices/bridges misconfigured by BIOS, including pccards, ethernet, etc.

 

It doesn't require assigning computer name, memory ranges, or i/o ranges on IOPCCardFamily. IOPCIFamily will try to assign resources automatically.

 

Please help test it and post the result under singleuser mode if possible, especially for those have reported "checkBridgeBusIDs invalid sub/cardbus/pci settings of 0x0" error while using the IOPCIFamily.10.5.2.beta. Thanks.

 

Chun-Nan

[Max For]

Hi Chun Nan,

I'm so glad to you for your work!! This is my case.= I've installed Iatkos v 1.0r2 and your patch rev 8, I've an Option Pc Card Fusion and after your patch it is detected, the blu light is on but I can't see anything in the network preferences and so I can't connect to internet.

I've tried with some software like Option connection manager for mac or Launch2net but they don't recognize the card. Have you a solution for this? Many thanks in advance and very very compliments for your great work.

[Jim Fish]

Hi All,

 

Thanks EqUaTe for the advice. After my last post I had to restore the AppleACPIPlatform.kext from my backup to get the machine to reboot.

 

I downloaded your new PCCard.10.5.2.eta2.pkg.zip and it started to run automatically. I was a bit reluctant to continue the install as there is a warning about needing the original AppleACPIPlaform.kext file and as we know, I haven't got it. But in for a penny in for a pound and I opted to continue. A reboot was required and so I did that.

 

Well good news. Before my system was taking several minutes to reboot. But now it seems to be very very much quicker - no longer a big start-upp delay .

 

Also the output from sudo dmesg | grep PC is much better - no more errors :-

 

sudo dmesg | grep PC

Password:

Extension "com.apple.driver.ApplePCIConfigurator" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.

Checking PCI bus 3

Checking PCI bus 6

Checking PCI bus 1

Checking PCI bus 2

PCI configuration changed (bridge=1 device=13 yenta=2)

IOPCCard info: Mac OS X PCMCIA Card Services 3.1.22

IOPCCard info: options: [pci] [cardbus] [pnp]

IOPCCard info: Intel PCIC probe:

IOPCCard info: Ricoh RL5C476 rev aa PCI-to-CardBus phys mem 0x40200000 virt mem 0x20981000

IOPCCard info: host opts [0]: [pci only] [io 4/6/1] [mem 3/6/1] [pci irq 11] [lat 64/64] [bus 3/5]

IOPCCard info: PCI card interrupts, PCI status changes

IOPCCard info: Intel PCIC probe:

IOPCCard info: Ricoh RL5C476 rev aa PCI-to-CardBus phys mem 0x40201000 virt mem 0x20f7c000

IOPCCard info: host opts [0]: [pci only] [io 4/6/1] [mem 3/6/1] [pci irq 11] [lat 64/64] [bus 6/8]

IOPCCard info: PCI card interrupts, PCI status changes

FireWire (OHCI) VendorID 1180 ID 552 PCI now active, GUID 00061b031004c70b; max speed s400.

Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IDE0@1F,1/AppleIntelPIIXATARoot/PRIM@0/AppleIntelPIIXPATA/ATADeviceNub@0/AppleATADiskDriver/IOATABlockStorageDevice/IOBlockStorageDriver/IC25N040ATMR04-0 IC25N040ATMR04-0/IOGUIDPartitionScheme/Untitled@2

IOPCCard info: cs: cb_alloc(bus 3): vendor 0x1814, device 0x0201

IOPCCard info: cs: cb_alloc(bus 3): found 1 functions

IOPCCard info: cs: cb_config(bus 3)

IOPCCard info: fn 0 bar 1: mem 0x40002000-0x40003fff

IOPCCard info: irq 11

 

 

I feel I am very close now to getting my wireless PCMCIA card working - A Comtrend 802.11 b/g Model GN-WMKG.

 

The System Profiler shows this now:-

 

pci1814,201:

 

Function: Network Controller

Vendor: Unknown

Type: CardBus

Vendor ID: 6164

Device ID: 513

 

 

 

Thanks again for your excellent help. What comes next???

 

 

Regards, Jim

[nchellzz]

hi Chun Nan and everyone else, i've some spare time so i've manage to re-install leopard 10.5.1, based on AMD, and here's the panic i got after i install both IOPCIFamily and IOPCCardFamily rev.8:

 

note: already chown, chmod, clear kextcache, and repairpermissions afterwards..

 

PCI Configuration changed (bridge=0 device=0 yenta=1)
mbinit: done
Security auditing service present
BSM auditing present
From path: "uuid"
Waiting for boot volume with UUID 838557A5-763C-3B3C-B550-1563C3AA8D8E
Waiting on <dict ID="0"><key>IOProvideClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>

IOPCCard info:		Intel PCIC Probe:	Ricoh RL5C475 Rev 81

Machine check capabilities (cpu 0) 0x0000000000000105:
5 error-reporting banks
Control MSR present

Machine check status 0x0000000000000004
machine check in progress

MCA error-reporting registers:
IA32_MC0_STATUS (0x401):	0x0000000000000000	invalid
IA32_MC1_STATUS (0x405):	0x0000000000000000	invalid
IA32_MC2_STATUS (0x409):	0x0000000000000000	invalid
IA32_MC3_STATUS (0x40d):	0x0000000000000000	invalid
IA32_MC4_STATUS (0x411):	0xb200000000070f0f	valid

MCA error code		: 0x0f0f
Model specific error code	: 0x0007
Other information		: 0x00000000

Status bits:
Processor context corrupt
Error enabled
Uncorrected error

panic (cpu 0 caller 0x001A7717): Machine-check at 0x348n001b, thread: 0x45c54f0, code 0x12, registers;
CRO: 0x8001003b,	 CR2: 0x348b9000,	CR3: 0x01a01000,	 CR4: 0x000006e0
EAX: 0x000000ff,	EBX: 0x348b9040,	ECX: 0x00000000,	EDX: 0x00000008
ESP: 0x2eb63bd8,	EBP: 0x2eb63bd8,	ESI: 0x0461c80c,	EDI: 0x046acb08
EFL: 0x00000202,	EIP: 0x348b001b

debugger called: <panic>
Backtrace, format-frame: Return Address (4 potential args on stack)

0x4edf18:	0x12b0e1 (0x456a2c	0x4edf4c	0x1332a3		0x0)
0x4edf68:	0x1a7717 (0x45f27c	0x348b001b	0x45c54f0	0x12)
0x4edfe8:	0x19f825 (0x12		0x0	0x0	0x0)

Backtrace terminated-invalid frame pointer 0

BSD process name corresponding to current thread: kernel_task

MacOS Version:
not yet set

Kernel Version:
Darwin Kernel Version 9.1.0: Fri Nov 16 14.50:43 SCT 2007; made by ToH; xnu-1228.0.2~1/BUILD/obj/RELEASE_I386

 

greatly appreciated if anyone can direct me on how to overcome this error..

i really need this UMTS card to work...

 

nb: when the panic happens, the LEDS on my UMTS card's already lit (it's a Sierra Wireless 875)

 

my device ID:

 

plus, i did not replace any other kexts in order to this work..

 

n should i try that PCCard.10.5.2.Beta2.pkg.zip posted by eQuate although i run 10.5.1?

[~Eureka]

Hi Chun Nan,

I'm so glad to you for your work!! This is my case.= I've installed Iatkos v 1.0r2 and your patch rev 8, I've an Option Pc Card Fusion and after your patch it is detected, the blu light is on but I can't see anything in the network preferences and so I can't connect to internet.

I've tried with some software like Option connection manager for mac or Launch2net but they don't recognize the card. Have you a solution for this? Many thanks in advance and very very compliments for your great work.

 

Hi Max For,

 

It seemed that you didn't have the proper driver for the ethernet pccard. I will suggest yout o search it on the forum to see if there is any information on the driver. Thanks.

 

Chun-Nan

 

Hi All,

 

Thanks EqUaTe for the advice. After my last post I had to restore the AppleACPIPlatform.kext from my backup to get the machine to reboot.

 

I downloaded your new PCCard.10.5.2.eta2.pkg.zip and it started to run automatically. I was a bit reluctant to continue the install as there is a warning about needing the original AppleACPIPlaform.kext file and as we know, I haven't got it. But in for a penny in for a pound and I opted to continue. A reboot was required and so I did that.

 

Well good news. Before my system was taking several minutes to reboot. But now it seems to be very very much quicker - no longer a big start-upp delay .

 

Also the output from sudo dmesg | grep PC is much better - no more errors :-

 

......

 

I feel I am very close now to getting my wireless PCMCIA card working - A Comtrend 802.11 b/g Model GN-WMKG.

 

The System Profiler shows this now:-

 

pci1814,201:

 

Function: Network Controller

Vendor: Unknown

Type: CardBus

Vendor ID: 6164

Device ID: 513

 

 

 

Thanks again for your excellent help. What comes next???

 

 

Regards, Jim

 

Hi Jim,

 

Your pccard contorller seems to be detected and be activated. What you need to do next is find the proper driver for your ethernet pccard. I will suggest yout o search it on the forum to see if there is any information on the driver. Thanks.

 

Chun-Nan

 

 

hi Chun Nan and everyone else, i've some spare time so i've manage to re-install leopard 10.5.1, based on AMD, and here's the panic i got after i install both IOPCIFamily and IOPCCardFamily rev.8:

 

note: already chown, chmod, clear kextcache, and repairpermissions afterwards..

 

PCI Configuration changed (bridge=0 device=0 yenta=1)
mbinit: done
Security auditing service present
BSM auditing present
From path: "uuid"
Waiting for boot volume with UUID 838557A5-763C-3B3C-B550-1563C3AA8D8E
Waiting on <dict ID="0"><key>IOProvideClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>

IOPCCard info:		Intel PCIC Probe:	Ricoh RL5C475 Rev 81

Machine check capabilities (cpu 0) 0x0000000000000105:
5 error-reporting banks
Control MSR present

Machine check status 0x0000000000000004
machine check in progress

MCA error-reporting registers:
IA32_MC0_STATUS (0x401):	0x0000000000000000	invalid
IA32_MC1_STATUS (0x405):	0x0000000000000000	invalid
IA32_MC2_STATUS (0x409):	0x0000000000000000	invalid
IA32_MC3_STATUS (0x40d):	0x0000000000000000	invalid
IA32_MC4_STATUS (0x411):	0xb200000000070f0f	valid

MCA error code		: 0x0f0f
Model specific error code	: 0x0007
Other information		: 0x00000000

Status bits:
Processor context corrupt
Error enabled
Uncorrected error

panic (cpu 0 caller 0x001A7717): Machine-check at 0x348n001b, thread: 0x45c54f0, code 0x12, registers;
CRO: 0x8001003b,	 CR2: 0x348b9000,	CR3: 0x01a01000,	 CR4: 0x000006e0
EAX: 0x000000ff,	EBX: 0x348b9040,	ECX: 0x00000000,	EDX: 0x00000008
ESP: 0x2eb63bd8,	EBP: 0x2eb63bd8,	ESI: 0x0461c80c,	EDI: 0x046acb08
EFL: 0x00000202,	EIP: 0x348b001b

debugger called: <panic>
Backtrace, format-frame: Return Address (4 potential args on stack)

0x4edf18:	0x12b0e1 (0x456a2c	0x4edf4c	0x1332a3		0x0)
0x4edf68:	0x1a7717 (0x45f27c	0x348b001b	0x45c54f0	0x12)
0x4edfe8:	0x19f825 (0x12		0x0	0x0	0x0)

Backtrace terminated-invalid frame pointer 0

BSD process name corresponding to current thread: kernel_task

MacOS Version:
not yet set

Kernel Version:
Darwin Kernel Version 9.1.0: Fri Nov 16 14.50:43 SCT 2007; made by ToH; xnu-1228.0.2~1/BUILD/obj/RELEASE_I386

 

greatly appreciated if anyone can direct me on how to overcome this error..

i really need this UMTS card to work...

 

nb: when the panic happens, the LEDS on my UMTS card's already lit (it's a Sierra Wireless 875)

 

my device ID: .....

 

plus, i did not replace any other kexts in order to this work..

 

n should i try that PCCard.10.5.2.Beta2.pkg.zip posted by eQuate although i run 10.5.1?

 

Hi nchellzz,

 

It is the first time I saw this error. I am sorry to say that I don't have AMD machine right now to test and I don't know if it has something to do with the error. Maybe you can google it on the internet for more information or try 10.5.2.beta2 to see if it works. Thanks.

 

Chun-Nan

[EqUaTe]

Hi Chun Nan,

I'm so glad to you for your work!! This is my case.= I've installed Iatkos v 1.0r2 and your patch rev 8, I've an Option Pc Card Fusion and after your patch it is detected, the blu light is on but I can't see anything in the network preferences and so I can't connect to internet.

I've tried with some software like Option connection manager for mac or Launch2net but they don't recognize the card. Have you a solution for this? Many thanks in advance and very very compliments for your great work.

 

Exactly which option card is it? I helped someone else (kizwan? I forget) get one working. Not ideal, but it worked.

The exact model is VERY important.

 

Hi All,

 

Thanks EqUaTe for the advice. After my last post I had to restore the AppleACPIPlatform.kext from my backup to get the machine to reboot.

 

I downloaded your new PCCard.10.5.2.eta2.pkg.zip and it started to run automatically. I was a bit reluctant to continue the install as there is a warning about needing the original AppleACPIPlaform.kext file and as we know, I haven't got it. But in for a penny in for a pound and I opted to continue. A reboot was required and so I did that.

 

Well good news. Before my system was taking several minutes to reboot. But now it seems to be very very much quicker - no longer a big start-upp delay .

 

I feel I am very close now to getting my wireless PCMCIA card working - A Comtrend 802.11 b/g Model GN-WMKG.

 

The System Profiler shows this now:-

 

pci1814,201

 

Regards, Jim

 

Checking these details on pcidatabase.com - this card is using the ralink chipset. Possibly RT2560.

I don't know if this works in leopard - you should hunt around for RT25xx / RT2500 drivers for osx in general, preferably leopard specifically. ralink themselves may be a good starting point.

 

 

hi Chun Nan and everyone else, i've some spare time so i've manage to re-install leopard 10.5.1, based on AMD, and here's the panic i got after i install both IOPCIFamily and IOPCCardFamily rev.8:

 

note: already chown, chmod, clear kextcache, and repairpermissions afterwards..

 

 

greatly appreciated if anyone can direct me on how to overcome this error..

i really need this UMTS card to work...

 

plus, i did not replace any other kexts in order to this work..

 

n should i try that PCCard.10.5.2.Beta2.pkg.zip posted by eQuate although i run 10.5.1?

 

It's probably worth a shot. Which release did you install for AMD?

I can probably try and work with you to get things working, but it's likely to be an extended process.

Also, who is the manufacturer of your UMTS card? Do they have OSX drivers? This alone won't fix it - you still need a kext for the specific hardware..

 

 

 

EqUaTe

[nchellzz]

i use Zephyroth's 10.5.1 release, my UMTS card is Sierra Wireless AC875, and they do have a .pkg software that we use to connect

 

i appreciate it if you can look into this

[EqUaTe]

i use Zephyroth's 10.5.1 release, my UMTS card is Sierra Wireless AC875, and they do have a .pkg software that we use to connect

 

i appreciate it if you can look into this

 

Do you see the panic with 10.5.2 beta2 ?

 

 

Have Sierra Wireless issued leopard drivers for the card?

Does the panic occur only if the card is connected, or always?

 

EqUaTe

[nchellzz]

hi EqUaTe,

 

i actually haven't try 10.5.2beta just yet, i'll try it in a couple of hours, do you think there's any chance it might work since i use 10.5.1?

 

and the newest version of sierrawatcher 2.0.4 added support for leopard so i think yes they should be supported

 

here's the release notes

 

the panic always happened with or without the card inserted

 

i'll be back with the result from 10.5.2beta

[twobunnyrabbit]

Hi Chun-Nan.

 

Had a chance to try out the latest 10.5.2 beta today (through the installation package). Everything seems to work. It also fixed the broken bluetooth prior to this when I updated the IOPCIFamily.kext.

 

Let me know if you want me to post a copy of my ioreg or dmesg log.

 

Thanks again.

[applehacker]

Hi. I think this may work for my bcm4311 minipcie card (2 have told me it does). I replaced thos two at the same time, and after reboot, i get kernal panic. what did I do wrong? thanks!

 

*EDIT* fixed panic, did everything right, but I still dont see anything bout a TI xx. what should I do?

got a Compaq Presario C571NR with a non-working minipci-e slot. really want my bcm4311 card to work. thanks!

[~Eureka]

Hi. I think this may work for my bcm4311 minipcie card (2 have told me it does). I replaced thos two at the same time, and after reboot, i get kernal panic. what did I do wrong? thanks!

 

*EDIT* fixed panic, did everything right, but I still dont see anything bout a TI xx. what should I do?

got a Compaq Presario C571NR with a non-working minipci-e slot. really want my bcm4311 card to work. thanks!

 

Hi applehacker,

 

Thanks for your interest on PCCard driver. However, I am sorry to say that you didn't offer enough information on your machine so I really don't know how to help you slove the problem. Perhaps you can offer some information on your machine such as ioreg, demsg or specificaiton of the machine.

 

I did some research about your Compaq Presario C571NR but I was not sure if it is what you have right now. http://h10025.www1.hp.com/ewfrf/wc/documen...71&lang=en#

According to that link (and I asume that you have the same notebook as it showed), I didn't see any information that that model has TI chip pccard controller. Therefore, I think that is why you didn't see any TI information after trying the pccard driver.

 

What IOPCIFamily included in the package does is just try to correct those devices misconfigured by BIOS so that those devices can be detected and recognized by the system. After that, you still need the proper drivers to make the devices work. IOPCIFamily itself doesn't offer the drivers for any devices.

 

Let me know if you have further question. Thanks.

 

Chun-Nan

[applehacker]

Oh, I see. Thank You for your answer. My PCI-E Bcm4311 card is not being recognized in OS X, even though it uses the same exact chipset as regular Mac cards. I thought this would allow it to see it. Uphuck himself said that my card should be natively supported, so I thought the driver was already provided in the OS, and this would just let it recognize it. Ive got that dammed kill switch on my C571NR, and its really bugging me. If you have any suggestions on what to do, please let me know. Here are my system specs if this helps.The message from the mesg | grep PC stated all the kernel dependencies, nothing else.

 

Compaq Presario C500 (C571NR)

Intel GM945 Chipset

Realtek Ethernet Card

Bcm4311 Mini pci-e wireless card

Intel Pentium Dual-Core Processor @ 1.73 ghz SSE2+SSE3(can this support EFI?)

 

If the mini pci-e is an unsolveable problem, what can I do to replace it and get a fully working Hackbook Pro. Thanks for your input!

[shemozzle]

total Noob here

been following the posts - how many people with ACPI problems have installed Power Management patch?

[Jim Fish]

Hi All,

 

Back with a quick update. I tried latest 10.5.2 beta and that gets my Comtrend PCMCIA card working (RT2500). I downloaded the driver from http://www.ralinktech.com/ralink/Home/Support/Macintosh.html and it installed fine. The wireless utility runs, I add my WEP code and shows the device as connected. The lights flash and all looks good. My router shows that MAC address as connected so all should be wonderfull! I used the Network utility to allocate a manual IP address, subnet mask and gateway as I read sometimes DHCP does not work correctly.

 

BUT...

 

I just can't get on the Internet with it. If I leave the wired NIC connected it, Internet access if fine. However, If I unplug the wired NIC no go anymore.

 

IFCONFIG shows two active NICS, two IP addresses on the correct subnet.

 

I have editied NetworkPreferences.plist and changed en0 to en1 etc. but no go.

 

Any ideas?

 

Thanks, Jim

[Leandruz08]

Please HELPME!, i forgot to backup the original files and after applied the newones the rev8 , my system crash

PLEASE can anyone send me the original files, also cant boot in single user $#"!$#"!$

 

Many Thanks!!!

[EqUaTe]

Oh, I see. Thank You for your answer. My PCI-E Bcm4311 card is not being recognized in OS X, even though it uses the same exact chipset as regular Mac cards. I thought this would allow it to see it. Uphuck himself said that my card should be natively supported, so I thought the driver was already provided in the OS, and this would just let it recognize it. Ive got that dammed kill switch on my C571NR, and its really bugging me. If you have any suggestions on what to do, please let me know. Here are my system specs if this helps.The message from the mesg | grep PC stated all the kernel dependencies, nothing else.

 

Compaq Presario C500 (C571NR)

Intel GM945 Chipset

Realtek Ethernet Card

Bcm4311 Mini pci-e wireless card

Intel Pentium Dual-Core Processor @ 1.73 ghz SSE2+SSE3(can this support EFI?)

 

If the mini pci-e is an unsolveable problem, what can I do to replace it and get a fully working Hackbook Pro. Thanks for your input!

 

Are you positive it's mini-pcie ? Not mini-pci?

Regardless, neither are related to this project really.

Your best bet would be to get device id's and make sure they're in

/System/Library/Extensions/IO80211Family.kext/Contents/PlugIns/AppleAirPortBrcm4311.kext/Contents/Info.plist

 

If they're not, add them. (Read the file first before making any changes).

 

 

 

total Noob here

been following the posts - how many people with ACPI problems have installed Power Management patch?

 

Which power management patch are you referring to? If it's the bundle, it's unrelated.

It's mostly people using old versions of acpi kexts.

 

Hi All,

 

Back with a quick update. I tried latest 10.5.2 beta and that gets my Comtrend PCMCIA card working (RT2500). I downloaded the driver from http://www.ralinktech.com/ralink/Home/Support/Macintosh.html and it installed fine. The wireless utility runs, I add my WEP code and shows the device as connected. The lights flash and all looks good. My router shows that MAC address as connected so all should be wonderfull! I used the Network utility to allocate a manual IP address, subnet mask and gateway as I read sometimes DHCP does not work correctly.

 

BUT...

 

I just can't get on the Internet with it. If I leave the wired NIC connected it, Internet access if fine. However, If I unplug the wired NIC no go anymore.

 

IFCONFIG shows two active NICS, two IP addresses on the correct subnet.

 

I have editied NetworkPreferences.plist and changed en0 to en1 etc. but no go.

 

Any ideas?

 

Thanks, Jim

 

I believe that's a common issue with the ralink drivers.

It seems they don't work very well on non-mac's. No idea why.

It's not an issue with this project.

 

There is a thread somewhere on IM where someone was customising the driver - I'd try to hunt it down and have a look.

 

 

Please HELPME!, i forgot to backup the original files and after applied the newones the rev8 , my system crash

PLEASE can anyone send me the original files, also cant boot in single user $#"!$#"!$

 

Many Thanks!!!

 

I'll try and get them to you tomorrow, but your best bet may be to get them off your osx install dvd..

You'll also need that to restore them.

[applehacker]

yes im ABSOLUTLY SURE ITS MINIPCIE. really, i am. and this card is supposed to be natively supported, hence its already in that file. and it is relavent, becases mini-pci-e is a cardbus. any suggestions?

[shemozzle]

I don't know if the new added devices will work or not. However, you can give it a try and let me know the result. In addition, if your pccard slot works under linux and it is not listed on the above the list (and if you believe it may work under mac), let me know the device id and I will try to add it to the next revision.

 

hi Chun-Nan

 

Would first like to offer my thanks for all your investment of time and effort.

 

Believe this might be a new device for you to add, TI7420 built-in chip on my Sony Vaio VGN-A series laptop and also on many other Sony's ie. FS FE FJ series.

 

Noticed in the device id capture below that it is linked in with flash mermory - a bit different.

 

Reports in windows device manager as TI17420 Integrated FlashMedia Controller.

 

It is recognised and useable under Linux.

 

 

If you need furture info please PM me.

 

Thanks again.

[applehacker]

Hey, Ive got an update. I installed that kext. I ran the command, and it scanned, nothing bout a Tixx12, but it say 3 things about 3 different pci ports. does this mean this laptop has pci ports I can use!!?!?!

[~Eureka]

I don't know if the new added devices will work or not. However, you can give it a try and let me know the result. In addition, if your pccard slot works under linux and it is not listed on the above the list (and if you believe it may work under mac), let me know the device id and I will try to add it to the next revision.

 

 

hi Chun-Nan

 

Would first like to offer my thanks for all your investment of time and effort.

 

Believe this might be a new device for you to add, TI7420 built-in chip on my Sony Vaio VGN-A series laptop and also on many other Sony's ie. FS FE FJ series.

 

Noticed in the device id capture below that it is linked in with flash mermory - a bit different.

 

Reports in windows device manager as TI17420 Integrated FlashMedia Controller.

 

It is recognised and useable under Linux.

 

.....

 

If you need furture info please PM me.

 

Thanks again.

 

Hi shemozzle,

 

I've been busy with school recently. I will try to add your pccard controller to the list this weekend. Thanks.

 

Chun-Nan

 

Hey, Ive got an update. I installed that kext. I ran the command, and it scanned, nothing bout a Tixx12, but it say 3 things about 3 different pci ports. does this mean this laptop has pci ports I can use!!?!?!

 

Hi applehacker,

 

Can you show the demsg result under singleuser mode (or standard mode)? Thanks.

 

Chun-Nan

[nchellzz]

PCI Configuration changed (bridge=0 device=0 yenta=1)
 mbinit: done
 Security auditing service present
 BSM auditing present
 From path: "uuid"
 Waiting for boot volume with UUID 838557A5-763C-3B3C-B550-1563C3AA8D8E
 Waiting on <dict ID="0"><key>IOProvideClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>

 IOPCCard info:		Intel PCIC Probe:	Ricoh RL5C475 Rev 81

 Machine check capabilities (cpu 0) 0x0000000000000105:
 5 error-reporting banks
 Control MSR present

 Machine check status 0x0000000000000004
 machine check in progress

 MCA error-reporting registers:
 IA32_MC0_STATUS (0x401):	0x0000000000000000	invalid
 IA32_MC1_STATUS (0x405):	0x0000000000000000	invalid
 IA32_MC2_STATUS (0x409):	0x0000000000000000	invalid
 IA32_MC3_STATUS (0x40d):	0x0000000000000000	invalid
 IA32_MC4_STATUS (0x411):	0xb200000000070f0f	valid

 MCA error code		: 0x0f0f
 Model specific error code	: 0x0007
 Other information		: 0x00000000

 Status bits:
 Processor context corrupt
 Error enabled
 Uncorrected error

 panic (cpu 0 caller 0x001A7717): Machine-check at 0x348n001b, thread: 0x45c54f0, code 0x12, registers;
 CRO: 0x8001003b,	 CR2: 0x348b9000,	CR3: 0x01a01000,	 CR4: 0x000006e0
 EAX: 0x000000ff,	EBX: 0x348b9040,	ECX: 0x00000000,	EDX: 0x00000008
 ESP: 0x2eb63bd8,	EBP: 0x2eb63bd8,	ESI: 0x0461c80c,	EDI: 0x046acb08
 EFL: 0x00000202,	EIP: 0x348b001b

 debugger called: <panic>
 Backtrace, format-frame: Return Address (4 potential args on stack)

 0x4edf18:	0x12b0e1 (0x456a2c	0x4edf4c	0x1332a3		0x0)
 0x4edf68:	0x1a7717 (0x45f27c	0x348b001b	0x45c54f0	0x12)
 0x4edfe8:	0x19f825 (0x12		0x0	0x0	0x0)

 Backtrace terminated-invalid frame pointer 0

 BSD process name corresponding to current thread: kernel_task

 MacOS Version:
 not yet set

 Kernel Version:
 Darwin Kernel Version 9.1.0: Fri Nov 16 14.50:43 SCT 2007; made by ToH; xnu-1228.0.2~1/BUILD/obj/RELEASE_I386

 

update for this error:

 

I've tried using beta PCCard.10.5.2.Beta2, no longer kernel panic, but the screen moves so fast i couldn't really read what's happening..

 

it's shows IOPCCard info: Intel PCIC Probe: Ricoh RL5C475 Rev 81

and then

something about bad mapping etc

then it boots into osx

 

does anyone knows what is happening here?

[~Eureka]

update for this error:

 

I've tried using beta PCCard.10.5.2.Beta2, no longer kernel panic, but the screen moves so fast i couldn't really read what's happening..

 

it's shows IOPCCard info: Intel PCIC Probe: Ricoh RL5C475 Rev 81

and then

something about bad mapping etc

then it boots into osx

 

does anyone knows what is happening here?

 

Hi nchellzz,

 

Try to boot with "-s" to enter singleuser mode and post the dmesg result on the forum. Thanks.

 

Chun-Nan