CardBus/PCMCIA PC Cards for Leopard

snam11 · February 12, 2008

Hi snam11,

Here is another test.only5 IOPCIFamily. Try it and let me know the dmesg result under singleuser mode. If kernel panic happens, show me the picture if possible or let me know where it stops. Thanks a lot.

Again, don't forget to backup your original files while trying it.

Chun-Nan

IOPCIFamily.test.only5.zip

hi chun-nan

i've tested your latest rel

here is the dmesg:

tage-5]
[stage-6]
 I/O: allocated block 1000:8
 I/O: allocated block 1008:4
 I/O: allocated block 1010:8
 I/O: allocated block 100c:4
 I/O: allocated block 1020:10
 MEM: allocated block 80000000:100000
 BUS: allocated block 3:1
 MEM: allocated block 80100000:200000
 I/O: allocated block 3000:1000
 BUS: allocated block 5:1
pciBridgeAllocateResource(bus 10, state 3)
Allocating resources on bus 10
[stage-0]test.only5
[stage-1]
[stage-2]
[stage-3]
[stage-4]
 MEM: 4 sub-range limited to 40000 each
 BUS: 2 sub-range limited to 0 each
[stage-5]
[stage-6]
 MEM: allocated block d0400000:1000
 MEM: allocated block d0401000:800
 MEM: allocated block d0402000:1000
 BUS: allocated block b:1
 MEM: allocated block d0403000:1000
pciBridgeAllocateResource(bus 7, state 3)
pciBridgeAllocateResource(bus 6, state 3)
pciBridgeAllocateResource(bus 3, state 3)
Allocating resources on bus 3
[stage-0]test.only5
[stage-1]
[stage-2]
[stage-3]
[stage-4]
 MEM: 1 sub-range limited to 100000 each
[stage-5]
[stage-6]
 MEM: allocated block 80000000:1000
pciBridgeAllocateResource(bus 4, state 3)
pciBridgeAllocateResource(bus 5, state 3)
Allocating resources on bus 5
[stage-0]test.only5
[stage-1]
[stage-2]
[stage-3]
[stage-4]
 MEM: 2 sub-range limited to 100000 each
 I/O: 1 sub-range limited to 1000 each
[stage-5]
[stage-6]
 MEM: allocated block 80100000:20000
 MEM: allocated block 80200000:100000
 I/O: allocated block 3000:20
pciBridgeAllocateResource(bus 2, state 3)
pciBridgeAllocateResource(bus 1, state 3)
Allocating resources on bus 1
[stage-0]test.only5
[stage-1]
[stage-2]
[stage-3]
[stage-4]
 MEM: 2 sub-range limited to 80000 each
 PFM: 1 sub-range limited to 10000000 each
 I/O: 1 sub-range limited to 1000 each
[stage-5]
[stage-6]
 PFM: allocated block c0000000:10000000
 I/O: allocated block 2000:100
 MEM: allocated block d0200000:10000
 MEM: allocated block d0220000:20000
pciBridgeAllocateResource(bus 12, state 3)
pciBridgeAllocateResource(bus 11, state 3)
PCI configuration changed (bridge=2 device=14 yenta=1)
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
mbinit: done
Security auditing service present
BSM auditing present
Starting AppleACPIPS2Nub
Found mouse PNP device
AppleACPIPS2Nub startup complete
From path: "uuid", 
Waiting for boot volume with UUID F4EDFD34-C9E7-3FF1-A157-8A7E8C92493B
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
IOPCCard info:   Intel PCIC probe: 
IOPCCard notice:   Bad bridge mapping at 0xd0401000!
not found.
IOPCCardBridge::start failed
IOPCCard info:   Intel PCIC probe:   O2Micro OZ711MP1/MS1 rev 21
FireWire (OHCI) VendorID 1217 ID f7 PCI now active, GUID 009fc0001a119e00; max speed s400.
IOPCCard info:   cs: cb_alloc(bus 11): vendor 0x104c, device 0x8025
IOPCCard info:   cs: cb_alloc(bus 11): found 1 functions
IOCardBusDevice: binding socket 0 function 0 to card services.
IOPCCard info:   cs: cb_config(bus 11)
IOPCCard info:     fn 0 bar 1: mem 0xa0004000-0xa00047ff
IOPCCard info:     fn 0 bar 2: mem 0xa0000000-0xa0003fff
IOPCCard info:     irq 20
FireWire (OHCI) TI ID 8025 CardBus now active, GUID 000108000000fbf8; max speed s800.
Extension "com.apple.driver.iTunesPhoneDriver" has no explicit kernel dependency; using version 6.0.
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/USB7@1D,7/AppleUSBEHCI/NOONTEC USB Storage@fd410000/MSC Bulk-Only Transfer@0/IOUSBMassStorageClass/IOSCSIPeripheralDeviceNub/IOSCSIPeripheralDeviceType00/IOBlockStorageServices/IOBlockStorageDriver/Maxtor 6 AD1G Media/IOFDiskPartitionScheme/Untitled 1@1
BSD root: disk1s1, major 14, minor 3

like previous releases, if i try to load manually lan kext; it works fine.

this rel won't boot in standard version.it hangs on windows application started.

regards

lele40 · February 12, 2008

Hi Lele40,

If possible, can you go to Post #364 , download the IOPCIFamily.info.only, load it, and show me the dmesg? I need some information from it. Thanks.

Chun-Nan

Hi Chun-Nan,

here is the dmesg with the IOPCIFamily.info.only you asked me. I Hope it will help you.

Thanks!

dmesg.zip

k2k2 · February 12, 2008

Tried rev8 on 10.5.2 -- was a "no go" for IOPCIFamily.kext; system would crash early on startup. Perhaps needs be recompiled against the latest kernel? Be warned.

kuntz · February 13, 2008

some news about 10.5.2?.. i wanna try but yesterday i installed the update

neos · February 13, 2008

No crash for me, running fine here using Vanilla Kernel.......

Also updated the graphic update had to replace back the AppleIntelIntegratedFrameBuffer.kext

Only one thing , i can't use any of my PCMCIA Cards

Tried DWL-G650+ (unknown vendor) and also 3com 3CRWE62092B WIFI.... seems there's no driver for it

Sony Vaio TX-57

Vanilla Kernel 10.5.2

GMA945 QE and CI

TIXXXX12 using chun nan rev8

ALC 262 working using Bronx kext

Powermanagement working w/ Battery indicator (sleep not working)

kizwan · February 13, 2008

Hi snam11 and kizwan,

Here is the test IOPCIFamily. Try it and let me know the dmesg result under singleuser mode. If kernel panic happens, show me the picture if possible or let me know where it stops. Thanks a lot.

Again, don't forget to backup your original files while trying it.

Chun-Nan

IOPCIFamily.test.only.zip

Hi Chun-Nan,

Sorry for late reply. I was outstation for last two days for work. I attached here the dmesg taken under single user mode. I'm able to get to single user mode, however my machine freeze when I try to load into normal mode. I attached here the picture where it freeze.

dmesg_kizwan_single5.txt

kizwan · February 13, 2008

Hi snam11 and kizwan,

Here is another test IOPCIFamily. Try it and let me know the dmesg result under singleuser mode. If kernel panic happens, show me the picture if possible or let me know where it stops. Thanks a lot.

Again, don't forget to backup your original files while trying it.

Chun-Nan

IOPCIFamily.test.only2.zip

==========================

Hi guys,

I would like to help you find out solutions to the problems. However, it will be helpful if you can also attach the dmesg result or other information (i.e. photos, etc.) instead of just telling me the pccard doesn't work. Otherwise, I won't know where the problem is and where I need to start. Thanks for understanding.

Chun-Nan

Hi Chun-Nan,

Here is the dmesg for this IOPCIFamily under single user mode. Freeze when try to boot into normal mode.

dmesg_kizwan_single6.txt

kizwan · February 13, 2008

Hi snam11, kizwan and elchile,Here is another test.only3 IOPCIFamily. Try it and let me know the dmesg result under singleuser mode. If kernel panic happens, show me the picture if possible or let me know where it stops. Thanks a lot.Again, don't forget to backup your original files while trying it.Chun-NanIOPCIFamily.test.only3.zip

Hi Chun-Nan,Here is the dmesg for this IOPCIFamily under single user mode. Also freeze if I tried to boot under normal mode.

Hi lele40,Thanks for the information. According to the demsg, your pccard controller seems to be activated. I think you are using the wireless PC Cards. If you do, what wifi card are you using now (vender id and product id)? What driver for the wireless device are you using now? If possible, can you let me know what extra kexts you are using are not from Leopard originally? Thanks.Chun-Nan=====================Hi snam11,Here is another test.only4 IOPCIFamily. Try it and let me know the dmesg result under singleuser mode. If kernel panic happens, show me the picture if possible or let me know where it stops. Thanks a lot.Again, don't forget to backup your original files while trying it.Chun-NanIOPCIFamily.test.only4.zip

Hi Chun-Nan,Here is the dmesg for this IOPCIFamily under single user mode. This also freeze if I tried to boot under normal mode. :moil:

Hi snam11,Here is another test.only5 IOPCIFamily. Try it and let me know the dmesg result under singleuser mode. If kernel panic happens, show me the picture if possible or let me know where it stops. Thanks a lot.Again, don't forget to backup your original files while trying it.Chun-NanIOPCIFamily.test.only5.zip

Hi Chun-Nan,Here is the dmesg for IOPCIFamily test.only5 under single user mode. With this rev, my notebook also freeze when I tried to boot under normal mode.

dmesg_kizwan_single6.txt

dmesg_kizwan_single8.txt

dmesg_kizwan_single9.txt

~Eureka · February 14, 2008

Hi snam11 and kizwan,

Here is another test.only6 IOPCIFamily. Try it and let me know the dmesg result under singleuser mode. If kernel panic happens, show me the picture if possible or let me know where it stops. Thanks a lot.

Again, don't forget to backup your original files while trying it.

Chun-Nan

IOPCIFamily.test.only6.zip

kuntz · February 14, 2008

hi,

i tried to replace the files in rev8 but nothing change.. how to get my reader works? what i neeed to do now.. after rebooti get this from terminal with command in the 1st port:

bash-3.2# dmesg | grep PC
AppleIntelPIIXPATA: Secondary PCI IDE channel is disabled

Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IDE0@1F,2/AppleAHCI/PRI@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/TOSHIBA MK1637GSX Media/IOFDiskPartitionScheme/Untitled 2@2

elchile · February 14, 2008

Hi snam11 and kizwan,

Here is another test.only6 IOPCIFamily. Try it and let me know the dmesg result under singleuser mode. If kernel panic happens, show me the picture if possible or let me know where it stops. Thanks a lot.

Again, don't forget to backup your original files while trying it.

Chun-Nan

IOPCIFamily.test.only6.zip

Hi Chun-Nan,

I ran IOPCIFamily.test.only6.kext

here the dmesg output (relevant part)

   bus 12
 BIOS config retained
  pciBridgeCheckConfiguration(bus 9, state 0)
  Checking PCI bus 9
 BIOS config retained
  pciBridgeCheckConfiguration(bus 3, state 0)
  Checking PCI bus 3
 MEM: new range size 100000 align 100000 flags 0
 PFM: new range size 0 align 100000 flags 0
 I/O: new range size 0 align 1000 flags 0
 BUS: new range size 2 align 1 flags 0
  pciBridgeAllocateResource(bus 0, state 0)
  Allocating resources on bus 0
  root bridge resource MEM fee10000 len cf0000
  root bridge resource MEM fed40000 len 5000
  root bridge resource MEM fed00400 len 1fc00
  root bridge resource MEM fec10000 len f0000
  root bridge resource MEM f400c000 len abf4000
  root bridge resource MEM f4007000 len 1000
  root bridge resource MEM 80000000 len 70000000
  root bridge resource MEM d0000 len 10000
  root bridge resource MEM a0000 len 20000
  root bridge resource I/O d00 len f300
  root bridge resource I/O 0 len cf8
  root bridge resource BUS 0 len 100
 clipped bridge I/O range head to 400:8f8 for 0:400 overlap 400
 clipped bridge MEM range head to d0000:0 for 0:100000 overlap 30000
 clipped bridge MEM range head to a0000:0 for 0:100000 overlap 60000
 I/O: sub-range outside parent range: 0x1f0:0x8
 I/O: sub-range outside parent range: 0x3f4:0x4
 I/O: sub-range outside parent range: 0x170:0x8
 I/O: sub-range outside parent range: 0x374:0x4
 MEM: 1 sub-range limited to 6b6b5800 each
 BUS: 1 sub-range limited to fc each
 MEM: allocated block 80000000:100000
 BUS: allocated block 1:2
  pciBridgeAllocateResource(bus 1, state 3)
  Allocating resources on bus 1
 MEM: 1 sub-range limited to 100000 each
 BUS: 1 sub-range limited to 1 each
 MEM: allocated block 80000000:1000
 BUS: allocated block 2:1
  pciBridgeAllocateResource(bus 9, state 3)
  pciBridgeAllocateResource(bus 12, state 3)
  pciBridgeAllocateResource(bus 11, state 3)
  pciBridgeAllocateResource(bus 2, state 3)
  PCI configuration changed (bridge=1 device=12 yenta=1)
  IOPCCardBridge::getOFConfigurationSettings: failed to configure the machine

snam11 · February 14, 2008

Hi snam11 and kizwan,

Here is another test.only6 IOPCIFamily. Try it and let me know the dmesg result under singleuser mode. If kernel panic happens, show me the picture if possible or let me know where it stops. Thanks a lot.

Again, don't forget to backup your original files while trying it.

Chun-Nan

IOPCIFamily.test.only6.zip

hi chun-nan

here is the dmesg:

source MEM d8000 len 4000
root bridge resource MEM d4000 len 4000
root bridge resource MEM d0000 len 4000
root bridge resource MEM a0000 len 20000
root bridge resource I/O d00 len f300
root bridge resource I/O 0 len cf8
root bridge resource BUS 0 len 100
 clipped bridge I/O range head to 400:8f8 for 0:400 overlap 400
 clipped bridge MEM range head to e0000:0 for 0:100000 overlap 20000
 clipped bridge MEM range head to dc000:0 for 0:100000 overlap 24000
 clipped bridge MEM range head to d8000:0 for 0:100000 overlap 28000
 clipped bridge MEM range head to d4000:0 for 0:100000 overlap 2c000
 clipped bridge MEM range head to d0000:0 for 0:100000 overlap 30000
 clipped bridge MEM range head to a0000:0 for 0:100000 overlap 60000
 MEM: 2 sub-range limited to 374fde00 each
 I/O: 6 sub-range limited to 2739 each
 BUS: 2 sub-range limited to 7b each
 I/O: allocated block 400:8
 I/O: allocated block 408:4
 I/O: allocated block 410:8
 I/O: allocated block 40c:4
 I/O: allocated block 420:10
 MEM: allocated block 80000000:100000
 BUS: allocated block 3:1
 MEM: allocated block 80100000:200000
 I/O: allocated block 3000:1000
 BUS: allocated block 5:1
pciBridgeAllocateResource(bus 10, state 3)
Allocating resources on bus 10
 clipped bridge MEM range head to d0401000:ff000 for d0400000:1000 overlap 1000
 MEM: sub-range outside parent range: 0xd0400000:0x1000
 MEM: 3 sub-range limited to 55000 each
 BUS: 1 sub-range limited to 0 each
 MEM: allocated block d0401000:1000
 MEM: allocated block d0402000:800
 MEM: allocated block d0403000:1000
pciBridgeAllocateResource(bus 7, state 3)
pciBridgeAllocateResource(bus 6, state 3)
pciBridgeAllocateResource(bus 3, state 3)
Allocating resources on bus 3
 MEM: 1 sub-range limited to 100000 each
 MEM: allocated block 80000000:1000
pciBridgeAllocateResource(bus 4, state 3)
pciBridgeAllocateResource(bus 5, state 3)
Allocating resources on bus 5
 MEM: 2 sub-range limited to 100000 each
 I/O: 1 sub-range limited to 1000 each
 MEM: allocated block 80100000:20000
 MEM: allocated block 80200000:100000
 I/O: allocated block 3000:20
pciBridgeAllocateResource(bus 2, state 3)
pciBridgeAllocateResource(bus 1, state 3)
Allocating resources on bus 1
 MEM: 2 sub-range limited to 80000 each
 PFM: 1 sub-range limited to 10000000 each
 I/O: 1 sub-range limited to 1000 each
 PFM: allocated block c0000000:10000000
 I/O: allocated block 2000:100
 MEM: allocated block d0200000:10000
 MEM: allocated block d0220000:20000
pciBridgeAllocateResource(bus 0, state 3)
pciBridgeAllocateResource(bus 11, state 3)
PCI configuration changed (bridge=2 device=14 yenta=0)

Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
mbinit: done
Security auditing service present
BSM auditing present
Starting AppleACPIPS2Nub
Found mouse PNP device
AppleACPIPS2Nub startup complete
Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
From path: "uuid", 
Waiting for boot volume with UUID F4EDFD34-C9E7-3FF1-A157-8A7E8C92493B
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
IOPCCardBridge::checkBridgeBusIDs invalid sub/cardbus/pci settings of 0x0
IOPCCard info:   Intel PCIC probe: 
IOPCCard notice:   Bad bridge mapping at 0xd0400000!
not found.
IOPCCardBridge::start failed
FireWire (OHCI) VendorID 1217 ID f7 PCI now active, GUID 009fc0001a119e00; max speed s400.
Extension "com.apple.driver.iTunesPhoneDriver" has no explicit kernel dependency; using version 6.0.
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/USB7@1D,7/AppleUSBEHCI/NOONTEC USB Storage@fd410000/MSC Bulk-Only Transfer@0/IOUSBMassStorageClass/IOSCSIPeripheralDeviceNub/IOSCSIPeripheralDeviceType00/IOBlockStorageServices/IOBlockStorageDriver/Maxtor 6 AD1G Media/IOFDiskPartitionScheme/Untitled 1@1
BSD root: disk1s1, major 14, minor 3

is now possible to boot in graphics mode and: THE LAN WORKS FLAWLESSLY!!!!!!!

the max speed is 100 instead of 1000 but is fair enough. (setting manually the speed to gbit will deconnect the ethernet lan)

internal firewire is detected and working with same issues as before, pcmcia and smartcard reader slot are not detected

good job!!

regards

kizwan · February 14, 2008

Hi snam11 and kizwan,

Here is another test.only6 IOPCIFamily. Try it and let me know the dmesg result under singleuser mode. If kernel panic happens, show me the picture if possible or let me know where it stops. Thanks a lot.

Again, don't forget to backup your original files while trying it.

Chun-Nan

IOPCIFamily.test.only6.zip

Hi Chun-Nan,

Here is the dmesg for IOPCIFamily test.only6. I can boot into normal mode, but my internal wireless still get "loaded unsuccessfully". However this time I get usefull information (boot with normal mode).

GFX0: family specific matching fails
GFX0: family specific matching fails
display: family specific matching fails
wl0: Broadcom BCM4318 802.11 Wireless Controller
4.170.25.8.2AirPort_Brcm43xx: Ethernet address 00:1a:70:71:0d:90
ath_attach: devid 0x1c
unable to attach hardware; HAL status 13
start [/sourceCache/AirPortDriverAtheros5424/AirPortDriverAtheros5424-300.22/src/driver/AtherosController.cpp:480] loaded unsuccessfully
GFX0: family specific matching fails
display: family specific matching fails
ApplePS2Trackpad: Synaptics TouchPad v6.2
GFX0: family specific matching fails
GFX0: family specific matching fails

Thank you.

dmesg_kizwan_iopci6info.txt

~Eureka · February 14, 2008

Tried rev8 on 10.5.2 -- was a "no go" for IOPCIFamily.kext; system would crash early on startup. Perhaps needs be recompiled against the latest kernel? Be warned.

Hi k2k2,

I don't know if it works on 10.5.2 or not because I am using 10.5.1 now.

Chun-Nan

hi,
i tried to replace the files in rev8 but nothing change.. how to get my reader works? what i neeed to do now.. after rebooti get this from terminal with command in the 1st port:

Hi kuntz,

As far as I know, IOPCCardFamily is only for pccard controller, not for flash media controller. You need extra driver to make your card reader work.

Chun-Nan

Hi Chun-Nan,

I ran IOPCIFamily.test.only6.kext

here the dmesg output (relevant part)

..........

Hi elchile,

I probably misunderstood what you said beofre. If possible, would you please tell me the issues/problems you have on you pccard again? Thanks.

Chun-Nan

=========================================

Hi guys,

To avoid confusing everyone, if you have ethernet issues due to IOPCIFamily, please check this link:

http://forum.insanelymac.com/index.php?showtopic=87592

Thanks.

Chun-Nan

spadge · February 15, 2008

I have a Toshiba M400 Tablet PC running OSX 10.5.2 with the 9.2.0 vanilla kernel. I am trying to get the Texas Instruments PCMCIA card bus drive to work. Before doing anything I backed up the following kext's and left them on the root user's desktop.

IOPCCardFamily

IOPCIFamily driver

AppleACPIPlatform

AppleAPIC

IOACPIFamily

I then extracted IOPCCardFamily_chunnan_Leopard_rev8 and replaced the files and restarted the machine. I now get a kernel panic immediately. I booted off the Kalyway 10.5.1 DVD and ran disk utility to repair permissons, this has made no difference. :wacko:

I am new to OSX and don't know how to copy the original kext's back within terminal. I would very much appreciate some assistance. I installed MacDrive on my Vista partition but I cannot find the root user desktop for the backed up files. Anyone know the path to the root users desktop?

Here is some information I got from running the terminal command from an Ubuntu 7.10 live cd.

ubuntu@ubuntu:~$ 03:0b.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller

bash: 03:0b.0: command not found

ubuntu@ubuntu:~$ Subsystem: Toshiba America Info Systems Unknown device 0001

bash: Subsystem:: command not found

ubuntu@ubuntu:~$ Flags: bus master, medium devsel, latency 168, IRQ 18

bash: Flags:: command not found

ubuntu@ubuntu:~$ Memory at ff800000 (32-bit, non-prefetchable)

bash: syntax error near unexpected token `('

ubuntu@ubuntu:~$ Bus: primary=03, secondary=04, subordinate=07, sec-late

bash: Bus:: command not found

ubuntu@ubuntu:~$ Memory window 0: 88000000-8bf

bash: Memory: command not found

ubuntu@ubuntu:~$

ubuntu@ubuntu:~$ I/O window 0: 00001000-000010ff

bash: I/O: No such file or directory

ubuntu@ubuntu:~$ I/O window 1: 00001400-000014ff

bash: I/O: No such file or directory

ubuntu@ubuntu:~$ 16-bit legacy interface ports at 0001

bash: 16-bit: command not found

ubuntu@ubuntu:~$

ubuntu@ubuntu:~$ 03:0b.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller (prog-if 1

bash: syntax error near unexpected token `('

ubuntu@ubuntu:~$ Subsystem: Toshiba America Info Systems

bash: Subsystem:: command not found

ubuntu@ubuntu:~$ Flags: bus master, medium dev

bash: Flags:: command not found

ubuntu@ubuntu:~$

ubuntu@ubuntu:~$ Memory at ff8f8000 (32-bit, non-prefetchable)

bash: syntax error near unexpected token `('

Have I done something incorrectly, do I need to change any values for these kext's to work with my Toshiba Tablet?

Here is the info I got from within the About this Mac section (don't know if this is of any help)

Type: Cardbus bridge

Driver Installed: No

Slot: PCI Slot 0

Bus: PCI

Vendor ID: 0x104c

Device ID: 0x8039

Revision ID: 0x000

Thanks for any help you can provide :blink:

Spadge

Dmytro · February 15, 2008

Chun-nan

Big thanks! IOPCIFamily.test.only6.zip now made my PCMCIA WORK on Latitude D620

spadge

If you want to restore your backedup kext do this:

boot with "-s" option

you will end up in a safe boot console, than type:

mount -uw /
cd /var/root/Desktop
cp -a whatever.kext /System/Library/Extensions/
chmod -R 755 /System/Library/Extensions/*.kext
chown -R root:wheel /System/Library/Extensions/*.kext
reboot

spadge · February 15, 2008

Chun-nan

Big thanks! IOPCIFamily.test.only6.zip now made my PCMCIA WORK on Latitude D620

spadge

If you want to restore your backedup kext do this:

boot with "-s" option

you will end up in a safe boot console, than type:
mount -uw /
cd /root/Desktop
cp -a whatever.kext /System/Library/Extensions/
chmod 755 /System/Library/Extensions/*.kext
chown root:wheel /System/Library/Extensions/*.kext
reboot

Thanks for your reply, I'm trying your suggestion.

when starting using -s I get the following output

extension "com.apple.iokit.IOPCIFamily" cannot be found

can't determine immediate dependencies for extension com.apple.driver.AppleACPIPlatform

Can't determine dependencies for com.apple.driver.AppleACPIPlatform.

Couldn't alloc class "AppleACPIPlatformExpert"

panic(cpu 0 caller 0x00430CE1): "Unable to find driver for this platform: \"ACPI\".\n"@/SourceCache/xnu/xnu-1228.3.13/iokit/Kernel/IOPlatfromExpert.cpp:1407

I am unable to do anything else, I cannot mount the filesystem etc

Do you have any other suggestions?

Spadge

Dmytro · February 15, 2008

thats bad...you cannot get into the console?

you can try all the flags "-s -f -v -x" during boot

~Eureka · February 15, 2008

Thanks for your reply, I'm trying your suggestion.

when starting using -s I get the following output

extension "com.apple.iokit.IOPCIFamily" cannot be found

can't determine immediate dependencies for extension com.apple.driver.AppleACPIPlatform

Can't determine dependencies for com.apple.driver.AppleACPIPlatform.

Couldn't alloc class "AppleACPIPlatformExpert"

panic(cpu 0 caller 0x00430CE1): "Unable to find driver for this platform: \"ACPI\".\n"@/SourceCache/xnu/xnu-1228.3.13/iokit/Kernel/IOPlatfromExpert.cpp:1407

I am unable to do anything else, I cannot mount the filesystem etc

Do you have any other suggestions?

Spadge

Hi Spadge,

It seems that the permission is not set right or the IOPCIFamily is missing. If you have installation DVD or other Mac system on your machine, boot with it and go the terminal. Try to fix the permission or copy IOPCIFamily file back to your folder.

Also, I am kinda confused. Can you tell me what files you exactly removed/replaced on your machine? Thanks.

Chun-Nan

Chun-nan

Big thanks! IOPCIFamily.test.only6.zip now made my PCMCIA WORK on Latitude D620

..........

Hi Dmytro,

Glad that your PCCard works with test.only6.

If possible, can you post your dmesg result under singleuser mode. Thanks.

Chun-Nan

collit99 · February 16, 2008

will these kext work on my card reader?

here are the infos using lspci.

0a:06.2 SD Host controller [0805]: O2 Micro, Inc. Integrated MMC/SD Controller [1217:7120] (rev 02)

0a:06.3 Mass storage controller [0180]: O2 Micro, Inc. Integrated MS/xD Controller [1217:7130] (rev 01)

pumbaster · February 16, 2008

Hi snam11 and kizwan,

Here is another test.only6 IOPCIFamily. Try it and let me know the dmesg result under singleuser mode. If kernel panic happens, show me the picture if possible or let me know where it stops. Thanks a lot.

Again, don't forget to backup your original files while trying it.

Chun-Nan

IOPCIFamily.test.only6.zip

woohoo! Thanks Chun-Nan! With test.only6 i've working cardbus on my Dell D620 !!!!!

~Eureka · February 16, 2008

Hi all,

Here is the beta IOPCIFamily for 10.5.2. In this edition, IOPCIFamily will try to fix devices/bridges misconfigured by BIOS, including pccards, ethernet, etc.

It doesn't require assigning computer name, memory ranges, or i/o ranges on IOPCCardFamily. IOPCIFamily will try to assign resources automatically.

Please help test it and post the result under singleuser mode if possible. Again, don't forget to backup your original file before trying it. Also, double check the file permissions before rebooting. Thanks a lot.

Chun-Nan

P.S. If your pccard originally is supported by Apple, you don't have to replace IOPCCardFamily. If it isn't, you have to replace both IOPCIFamily and IOPCCardFamily.

IOPCIFamily.10.5.2.beta.zip

EqUaTe · February 16, 2008

Before I try this one, I just want to make clear that rev8 works just _FINE_ on 10.5.2

Any errors are due to other kexts having been incorrectly replaced, or missing installation steps.

Also, I have working firewire on my setup as well as pcmcia, with no speed issues

AK-84 · February 16, 2008

Hi everyone!

I'm new to all this hackintosh thing. I downloaded the Kalaway Leo DVD and tried to install it on my laptop. But it does not work. My laptop is an ASUS X51R with the following details: Pentium Core Duo T2130, DVD SuperMulti, 120GB HDD, 2GB RAM, ATI X1100 VGA. Now as you can see it's an X200 chipset. So this is the problem. When I try to install Leo I get this error in -v mode: IOPCCardBridge::start failed. I know that a lot of people are having issues with the x200 chipset. I was redirected to this topic and I see that thankfuly with the help of Chun-Nan lot of you are getting it to work.

My question is (as I am a total noob regarding this and it's my first time) how do I install this files Chun-Nan uploaded? I have the kalaway dvd only. I don't have Tiger installed, only Vista.

A guide would be fantastic. Thank's for the help in advance!

EqUaTe · February 16, 2008

Works fine for me still

eb 16 13:15:22 localhost kernel[0]: IOPCCard info:   Intel PCIC probe: 
Feb 16 13:15:22 localhost kernel[0]: IOPCCard info:	 O2Micro OZ711EZ1 rev 21 PCI-to-CardBus phys mem 0x40100000 vir
t mem 0x213d9000
Feb 16 13:15:22 localhost kernel[0]: IOPCCard info:	   host opts [0]: [pci/way] [pci irq 19] [lat 64/32] [bus 2/2]
Feb 16 13:15:22 localhost kernel[0]: IOPCCard info:	   PCI card interrupts, PCI status changes
Feb 16 13:15:22 localhost kernel[0]: AppleIntelPIIXPATA: Secondary PCI IDE channel is disabled
Feb 16 13:15:22 localhost kernel[0]: FireWire (OHCI) VendorID 1217 ID f7 PCI now active, GUID 334fc00008260870; max sp
eed s400.
Feb 16 13:15:22 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IDE0@1F,
2/AppleAHCI/PRI@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/ST980813AS Media/IO
FDiskPartitionScheme/Untitled 3@3
Feb 16 13:15:22 localhost kernel[0]: BSD root: disk0s3, major 14, minor 3
Feb 16 13:15:22 localhost kernel[0]: IOPCCard info:   cs: cb_alloc(bus 2): vendor 0x14e4, device 0x4320
Feb 16 13:15:22 localhost kernel[0]: IOPCCard info:   cs: cb_alloc(bus 2): found 1 functions
Feb 16 13:15:22 localhost kernel[0]: IOCardBusDevice: binding socket 0 function 0 to card services.
Feb 16 13:15:22 localhost kernel[0]: IOPCCard info:   cs: cb_config(bus 2)
Feb 16 13:15:22 localhost kernel[0]: IOPCCard info:	 fn 0 bar 1: mem 0x40002000-0x40003fff
Feb 16 13:15:22 localhost kernel[0]: IOPCCard info:	 irq 19

CardBus/PCMCIA PC Cards for Leopard

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites