ddrdark Posted February 20, 2008 Share Posted February 20, 2008 again I'm trying to get sleep work, but I can't... I don't know why but I can't..... f*ck!!!!!!, when I go to the apple menu > sleep after 5 seconds the pc shutdown and restart automatically Link to comment Share on other sites More sharing options...
FavleX Posted February 20, 2008 Share Posted February 20, 2008 again I'm trying to get sleep work, but I can't... I don't know why but I can't..... f*ck!!!!!!, when I go to the apple menu > sleep after 5 seconds the pc shutdown and restart automatically Have you checked every bios related config? Have tried every smbios avalaible? Have you repaired each time you permission and ownership? Have you tried with kaly and retail way installation? Have you changed different cmos version? Link to comment Share on other sites More sharing options...
FavleX Posted February 20, 2008 Share Posted February 20, 2008 HandBrake ) Yes good tip , with it cpu loaded @98% for around 1and half hour, temperature never gone over 58 celsius degree..opinions? Link to comment Share on other sites More sharing options...
bigcid10 Posted February 24, 2008 Share Posted February 24, 2008 I installed the updated alc889a kext files from the kext folder and reboted now I have digital 5.1 dolby sound from my alc889a card Thanks so much ,bigcid10 Link to comment Share on other sites More sharing options...
LS8 Posted February 24, 2008 Author Share Posted February 24, 2008 bigcid10: really? You used kexts from my pack? I think other users reported that 5.1 audio doesn't work (I have 2.0 speakers so I cannot verify that). Link to comment Share on other sites More sharing options...
bigcid10 Posted February 25, 2008 Share Posted February 25, 2008 yes IS8,I have Z-680's with dd encoder using optical out from the 889a in pref ,you have to set "Play sound effects and alerts to digital" and output to"digital out" the digital out will have no output controls though I was watching a dvd movie in dd in dvd player Link to comment Share on other sites More sharing options...
DesertFox Posted February 25, 2008 Share Posted February 25, 2008 Has anyone upgraded to Leo Server 10.5.2 successfully? Is it the same procedure as with regular Leopard? Link to comment Share on other sites More sharing options...
doob Posted February 25, 2008 Share Posted February 25, 2008 I have revision 2.1 of the GA-P35-DS4 motherboard. I have installed Leopard 10.5.2, guid, efi and almost everything works great. I have one IDE hard disk that Leopard is installed on and 7 NTFS SATA disks. The problem I have is that the same NTFS disks end up with different names almost every time I boot the computer. I also have NTFS 3g installed. And is it possible to rename the disks to something other than Untitled 1, 2 and so on. Link to comment Share on other sites More sharing options...
bigcid10 Posted February 26, 2008 Share Posted February 26, 2008 yes ,you have to name them in windows Link to comment Share on other sites More sharing options...
nathandw Posted February 26, 2008 Share Posted February 26, 2008 Hi every1, I got the system running for a while now. Now I'm looking for an airport compatible pci-wlan-card to work with Leo 10.5.2. Which one can be recommended? Which is natively supported (that would be nice). Thanx in advance Nathan Link to comment Share on other sites More sharing options...
LS8 Posted February 26, 2008 Author Share Posted February 26, 2008 ...I'm looking for an airport compatible pci-wlan-card to work with Leo 10.5.2. Which one can be recommended? Which is natively supported (that would be nice)... ASUS WL-138g v2 Link to comment Share on other sites More sharing options...
theyoung Posted February 26, 2008 Share Posted February 26, 2008 yes IS8,I have Z-680's with dd encoder using optical out from the 889ain pref ,you have to set "Play sound effects and alerts to digital" and output to"digital out" the digital out will have no output controls though I was watching a dvd movie in dd in dvd player Confirmed this is working, also DD5.1/DTS passthrough woohoo!!! Link to comment Share on other sites More sharing options...
~pcwiz Posted February 27, 2008 Share Posted February 27, 2008 Does this pack work for the DS3P as well? EDIT: Some other questions: (I'm really confused) 1) Question above, does this work with the DS3P. The hardware seems to be exactly the same 2) I am running Kalyway 10.5.1 with EFI, Vanilla, on an MBR partition soon to be updated to 10.5.2 with Kalyway Combo Updater + 10.5.2 Vanilla kernel + Leopard graphics update 1.0 + Probably AppleSMBIOS by netkas or mac.nub. What would I do? I already have sound, networking, video fully working. 3) What are the IOAHCIFamily, IOATAFamily, JMicronATA, IONetworkingFamily, AppleACPIPlatform, and AppleAHCIPort kexts for? Link to comment Share on other sites More sharing options...
Coda Posted February 27, 2008 Share Posted February 27, 2008 Does this pack work for the DS3P as well? Yes. And DS3L, DS3R. Probably the EP35 and P35C boards too. Link to comment Share on other sites More sharing options...
DesertFox Posted February 28, 2008 Share Posted February 28, 2008 bigcid10, can you elaborate on your rocketraid setup a bit? All all the drives internal? Are you booting leopard from the raid? How easy was it to install efi / leopard on the raid set? Was it recognized automatically by the installers? How much faster is it compared to software raid (via Disk Utility). I've been looking for a compatible raid card for a while. This might be a winner! Link to comment Share on other sites More sharing options...
mafiasilk Posted February 28, 2008 Share Posted February 28, 2008 Hi Guys, I've been trying all day to get sound working on this Gigabyte GA-P35-DS4 board. I know it's Realtek ALC 889 chipset, but I have tried various things from various posts to get it working, I would appreciate a real link and info to a file that works for this sound card on 10.5.2....... Please please help! This is my 2st post - Hi to all hackintoshers! Link to comment Share on other sites More sharing options...
Professor Posted February 28, 2008 Share Posted February 28, 2008 Hi Guys, I've been trying all day to get sound working on this Gigabyte GA-P35-DS4 board. I know it's Realtek ALC 889 chipset, but I have tried various things from various posts to get it working, I would appreciate a real link and info to a file that works for this sound card on 10.5.2....... Please please help! This is my 2st post - Hi to all hackintoshers! Given, that you have installed the patch from ls8, you can use the attached file (a codec dump which i took under linux for the sound of the Gigabyte board) for AppeHDAPatcher 1.1.8. It should work. Restart after that. Then choose in sound system preferences Internal Speakers in Output, and put the speakers into the right socket at the back at your computer. It works for me. (It took me a while to find out, which socket is the right one. Startup iTunes and play a song for trying until you found the right socket) codec_dump.txt.zip Link to comment Share on other sites More sharing options...
doob Posted February 28, 2008 Share Posted February 28, 2008 yes ,you have to name them in windows Thanks, that worked Link to comment Share on other sites More sharing options...
AiRLAC Posted February 29, 2008 Share Posted February 29, 2008 I just want to say: THANK YOU for this guide! Check my sig. Link to comment Share on other sites More sharing options...
karol Posted February 29, 2008 Share Posted February 29, 2008 ? additional SAS Raid Card booting Leopard within Gigabyte P35-DS4 ? what do you think - is it possible? the main question is : are that motherboard allow booting from additional card in bios ? like badexe2 allow I'd like use HighPoint RocketRAID 3520 with 8 drives SAS 36GB 15000RPM in Raid5 as boot drive to macOSX and use any gigabyte mobo (like GA-X48-DQ6) together with overclocked Q6600 or QX9650 any suggestions ... please ------------------------------------------------------------- Motherboard: Gigabyte GA-P35-DS4 rev. 2.0 BIOS: F7, F8, F10, F11 Built in LAN & Sound - OK Processor: Q6600 @ 3.6 GHz 9*400 -1,36V- temperature idle 38 overnight load 69 - OK Air Cooling CPU: Thermalright Ultra-120 eXtreme + 2x Noctua NF-P12P fan Drives: Seagate 160GB 7200K SATA - OK Optical: Samsung ST-203N SATA DVD RW DL - OK RAM: Kingston 800MHz CL5- 4x1GB - OK Graphic: EVGA 8800 GTX 768MB flashed to Quadro5600 - NVinject & v.bios by "aqua-mac.com" - OK Display: HP LP3065 2560x1600 - OK Geekbench 32: 7103 ; Openmark: 33216 ; Xbench: 307.65 without HD and 180.63 including slow Seagate HD OS X 10.5.2 (genuie retail DVD with "Is8 guide" and later "Davin guide") Link to comment Share on other sites More sharing options...
mafiasilk Posted February 29, 2008 Share Posted February 29, 2008 Given, that you have installed the patch from ls8, you can use the attached file (a codec dump which i took under linux for the sound of the Gigabyte board) for AppeHDAPatcher 1.1.8. It should work. Restart after that. Then choose in sound system preferences Internal Speakers in Output, and put the speakers into the right socket at the back at your computer. It works for me. (It took me a while to find out, which socket is the right one. Startup iTunes and play a song for trying until you found the right socket) You certianly are the Professor! It worked like a dream, now I see from your sig you got Sleep and Shutdown working, could you share the info again! Thanks for your help so far, im nearly there! This is the last bit I think! Oh and the About this mac still says Unknown...maybe later with that one Link to comment Share on other sites More sharing options...
Psykonaut Hitman Posted February 29, 2008 Share Posted February 29, 2008 I've been running Kalyway 10.5.1 on my P35-DS4 rev2.1 with one 7300GT Sonic 256mb DDR3. Recently, I got an exact video card and installed it in the second pci-e slot so that I can install more than 4 projectors. I cant seem to make it work as I am having boot problems. What would you guys recommend? Has anybody successfully installed more than one videocard on any hackintosh? Link to comment Share on other sites More sharing options...
3phemeral Posted February 29, 2008 Share Posted February 29, 2008 Hi Guys, I've been trying all day to get sound working on this Gigabyte GA-P35-DS4 board. I know it's Realtek ALC 889 chipset, but I have tried various things from various posts to get it working, I would appreciate a real link and info to a file that works for this sound card on 10.5.2....... Please please help! This is my 2st post - Hi to all hackintoshers! You could also try the instructions I wrote here, which has a (working) link to the kexts. This should make your sound work properly, including mic in.If you need any additional help/if things are unclear, give me a shout All the best, 3phemeral Link to comment Share on other sites More sharing options...
raamendeii Posted March 1, 2008 Share Posted March 1, 2008 I have a hard drive problem. I have three 750GB hard drives, but only one is being detected at 698GB, one at 128GB, and one not at all. I actually used the Kalyway disc to install my system, so I'm not sure if that's the source of the problem or not. Any insight? Oh and thanks for all the support on this thread. It's been really helpful. I apologize if this is an issue that was covered earlier. I scanned all the post topics and I didn't see anything that seemed relevant so I thought I'd make a post to cry out for help. Link to comment Share on other sites More sharing options...
carlos228 Posted March 1, 2008 Share Posted March 1, 2008 Hello, first: may many thanks for this thread and support here! :-) solved lots of problems, but my last problem isn´ t fixed yet: my Gigabyte P35-DS4 / Kalyway 10.5.2 + all updates crashes with > 3 GByte RAM. With only 3 Gigs it works perfect. I aleady installed the IOATAFamily.kext from this thread: http://forum.insanelymac.com/index.php?sho...=88335&st=0 but it doesn´t make any difference, nor in ACHI or IDE mode. I have CD-ROM & 160 GByte system disc on IDE, some other HDs on S-ATA. Crash (black screen of death, not only the app) appears e.g. when rendering a motion project to Ram (Crtl-R) I tried all combinations (4GByte, 5GByte, 6 GByte Dual & Single Channel, Boot IDE or ACHI), but it´ s alwas the same: more then 3 Gigs -> sooner or later crash, always crash with motion. 3 Gigs: rockstable. I underclocked the RAM and set very slow timings for testing to be shure it´ s not the RAM itself. Has anybody an Idea how to fix this ? config: Gigabyte P35-DS4, install method: Kaly 10.5.1 DVD / option vanilla kernel / GUID 2 MSI NX 7600 cards with NVInject ( version from the Kaly DVD, I guess 1.0 ) update to 10.5.2 with the kaly updater Leo Graphics update 1 Link to comment Share on other sites More sharing options...
Recommended Posts