LS8 Posted February 14, 2008 Author Share Posted February 14, 2008 Even DS4 rev 1.0 has alc889a Link to comment Share on other sites More sharing options...
nylock10 Posted February 14, 2008 Share Posted February 14, 2008 So pretty much any rev of the GA-P35-DS4 will work OK? The board seems like a nice one, it even supports 1333MHz FSB for future processor upgrades. Link to comment Share on other sites More sharing options...
LS8 Posted February 14, 2008 Author Share Posted February 14, 2008 I have one piece rev.1.0 and one rev.1.1, both work great. Other people in this forum reported that also rev.2.0 and rev.2.1 are OK. Link to comment Share on other sites More sharing options...
aliab Posted February 15, 2008 Share Posted February 15, 2008 Hi Installed from genuine retail DVD: P35-DS3P rev 1 Bios F7 10.5.2 update In bold kexts being updated by 10.5.2 Mod IOAHCIFamily.kext AppleACPIPlatform.kex AppleAHCIPort.kext AppleSMBIOS.kext AppleHDA.kext Missing AppleIntelCPUPowerManagement.kext Add dsmos.kext Mod file(EFI Strings: 7300GT, TM, ALC889a) com.apple.Boot.plist Could you owners of P35-DSx publish it Link to comment Share on other sites More sharing options...
FavleX Posted February 15, 2008 Share Posted February 15, 2008 yes u right Coda, but the nylock10 question was related about the board got any differnces involved on installing osx86 with the retail mode, then eht answer is No Differences. Link to comment Share on other sites More sharing options...
LTL Posted February 15, 2008 Share Posted February 15, 2008 Will this tutorial work with this motherboard: http://www.newegg.com/Product/Product.aspx...N82E16813128064 It's the GA-P25-DS4, but it is the rev.2.0 version. Will that make a difference at all, or can I just install Leopard right away (via this tutorial)? I'm relatively very happy with my board .. P35-DS3P v2.1 Link to comment Share on other sites More sharing options...
FavleX Posted February 15, 2008 Share Posted February 15, 2008 My com.appleBoot.plist with strings for Quadro fx3500, alc889,tm http://www.divshare.com/download/3790720-3fa Link to comment Share on other sites More sharing options...
LS8 Posted February 15, 2008 Author Share Posted February 15, 2008 ...Installed from genuine retail DVD: P35-DS3P rev 1 Bios F7 10.5.2 update... Thank you! Link to comment Share on other sites More sharing options...
fredouille Posted February 15, 2008 Share Posted February 15, 2008 @ Professor : I own you a beer man ! My shutdown works since I tryed out you tip (I tested it 3 time, after I cleared the DMI) So far so good ! Thanks to all of you guys, this Forum really rocks, because of you ! hello mowglibook, what do you mean by " i tried out your tip" ; you deleted jmicron.kext or you used sleep_mach kernel powered by the shell command ? thanks ( merci !!!) fred Link to comment Share on other sites More sharing options...
karol Posted February 15, 2008 Share Posted February 15, 2008 My P35-DS4 rev 2.0 works stable with Q6600 @3.6 for last month only problems are shutdown, slip, reboot - I have not try F8 bios jet the other solutions form that forum failed - any suggestions ? please ------------------------------------------------------------- Motherboard: Gigabyte GA-P35-DS4 v 2.0 BIOS: F10 Built in LAN & Sound - OK Processor: Q6600 @ 3.6 GHz 9*400 -1,36V- temperature idle 38 load 69 - OK Drives: Seagate 160GB 7200K SATA - OK Optical: Samsung ST-203N SATA DVD RW DL - OK RAM: Kingston 800MHz CL5- 4x1GB - OK Graphic: EVGA 8800 GTX 768MB flashed to Quadro5600 - NVinject & bios by aqua-mac - OK Display: HP LP3065 2560x1600 - OK Geekbench 32: 7103 ; Openmark: 33216 ; Xbench: 307.65 without HD and 180.63 including slow Seagate HD OS X 10.5.2 (genuie retail DVD with "Is8 guide" and later "Davin guide") Link to comment Share on other sites More sharing options...
LS8 Posted February 15, 2008 Author Share Posted February 15, 2008 Adddsmos.kext Do I really need to add dsmos.kext again, if I had it installed before 10.5.2 update? Does the update installer remove it? Link to comment Share on other sites More sharing options...
aliab Posted February 15, 2008 Share Posted February 15, 2008 No you have not of course i mean only take care of the bold's one because they are remplaced by 10.5.2 update the kext i managed are in fine the same in 10.5.1 and 10.5.2 PS:There is a good tool in TOAST 8 for comparison of files or folders just do ALT-C My P35-DS4 rev 2.0 works stable with Q6600 @3.6 for last monthonly problems are shutdown, slip, reboot - I have not try F8 bios jetthe other solutions form that forum failed - any suggestions ? please -------------------------------------------------------------Motherboard: Gigabyte GA-P35-DS4 v 2.0 BIOS: F10Built in LAN & Sound - OK Processor: Q6600 @ 3.6 GHz 9*400 -1,36V- temperature idle 38 load 69 - OKDrives: Seagate 160GB 7200K SATA - OKOptical: Samsung ST-203N SATA DVD RW DL - OKRAM: Kingston 800MHz CL5- 4x1GB - OKGraphic: EVGA 8800 GTX 768MB flashed to Quadro5600 - NVinject & bios by aqua-mac - OKDisplay: HP LP3065 2560x1600 - OKGeekbench 32: 7103 ; Openmark: 33216 ; Xbench: 307.65 without HD and 180.63 including slow Seagate HDOS X 10.5.2 (genuie retail DVD with "Is8 guide" and later "Davin guide") First BIOS F7 Link to comment Share on other sites More sharing options...
LS8 Posted February 15, 2008 Author Share Posted February 15, 2008 OK, thanks. I have updated the first post with your comments, please read it and tell if it is OK. Thanks! Link to comment Share on other sites More sharing options...
aliab Posted February 15, 2008 Share Posted February 15, 2008 Yes it's ok thank's to you Notice that if you manage a fresh install with terminal you can apply 10.5.2 combo then manage kext and efi boot & string only a with -v -f single reboot EDIT/ i have test the time machine recovery under 10.5.2 during the account set up and everything run fine EDIT PS ; i have just read your script and i would say that if you're using modded (i do not ) IOATAFamily.kext IONetworkingFamily.kext JMicronATA.kext they would be also replaced by 10.5.2 AppleIntelCPUPowerManagement.kext is also added so you have to trash it again i hope i do not forget some other Link to comment Share on other sites More sharing options...
LS8 Posted February 15, 2008 Author Share Posted February 15, 2008 Thank you, first post updated. AppleIntelCPUPowerManagement.kext is taken care of in step 2/. Link to comment Share on other sites More sharing options...
nylock10 Posted February 15, 2008 Share Posted February 15, 2008 Okay, I'll go with the GA-P35-DS4 rev.2.0. If it doesn't ship with BIOs F7, where can I download it? The Gigabyte website only lists BIOs F8 - F11? Thanks for the replies Link to comment Share on other sites More sharing options...
MowgliBook Posted February 15, 2008 Share Posted February 15, 2008 Here, same adress than the other...only change the version id. http://europe.giga-byte.com/FileList/BIOS/...-p35-ds4_f7.exe Link to comment Share on other sites More sharing options...
Stellair Posted February 15, 2008 Share Posted February 15, 2008 The rev 2.1 has energy saver and 2.0 hasn't. That's the only difference http://www.giga-byte.com/FileList/WebPage/..._080104_des.htm Link to comment Share on other sites More sharing options...
Nitramusa Posted February 15, 2008 Share Posted February 15, 2008 LS8 can u help me out? I have a new PC with P35-DS4 and an external eSATA HD. So can i first install Leopard on the external HD, then apply the patch on the intern HD of my computer while i run Leopard of my External HD? I dont really get it When you say 'Make Partitions' this includes other partitions too for my Tri Boot for example? and data partition? Thank you for the good work Link to comment Share on other sites More sharing options...
DesertFox Posted February 15, 2008 Share Posted February 15, 2008 The rev 2.1 has energy saver and 2.0 hasn't. That's the only difference http://www.giga-byte.com/FileList/WebPage/..._080104_des.htm Is the GA-P35-DS4 rev2.1 and GA-EP35-DS4 rev 2.1 the same card? has anyone got the EP35 rev 2.1? http://www.giga-byte.com/Products/Motherbo...=2745,2624,2744 Link to comment Share on other sites More sharing options...
LS8 Posted February 15, 2008 Author Share Posted February 15, 2008 They are different motherboards. http://tw.giga-byte.com/Products/Motherboa...?ProductID=2744 http://tw.giga-byte.com/Products/Motherboa...?ProductID=2745 Link to comment Share on other sites More sharing options...
DesertFox Posted February 15, 2008 Share Posted February 15, 2008 They are different motherboards. http://tw.giga-byte.com/Products/Motherboa...?ProductID=2744 http://tw.giga-byte.com/Products/Motherboa...?ProductID=2745 Yah, on paper they are different, but in actuality? Both of em got exactly the same spec. Link to comment Share on other sites More sharing options...
LS8 Posted February 15, 2008 Author Share Posted February 15, 2008 You're right. The technical specifications seem to be totally equal. Link to comment Share on other sites More sharing options...
rootroot Posted February 16, 2008 Share Posted February 16, 2008 I just bought one of this mobo (and a complete e8400 setup to play with) to install my copy of kalyway, I was just wondering if anybody has been able to get the raid function o work. thx Link to comment Share on other sites More sharing options...
karol Posted February 16, 2008 Share Posted February 16, 2008 thanks, F7 & F8 bios help a little - reboot works OK but still shutdown not switch off all fans... and after overnight sleep - Built in LAN forgot it's IP address... any suggestions ? please in my opinion best mobo for Quad + LEO = GA-P35-DQ6 between GA-P35-DS4 and GA-P35-DQ6 difference is only within quality of power to CPU when quad extremely overclocked currently all DS3R, DS4, DQ6 are build on the same board... only volume and quality of chips and condenser are different ------------------------------------------------------------- Motherboard: Gigabyte GA-P35-DS4 v 2.0 BIOS: F7, F8, F10 Built in LAN & Sound - OK Processor: Q6600 @ 3.6 GHz 9*400 -1,36V- temperature idle 38 load 69 - OK Cooling CPU: Thermalright Ultra-120 eXtreme + 2x Noctua NF-P12P fan Drives: Seagate 160GB 7200K SATA - OK Optical: Samsung ST-203N SATA DVD RW DL - OK RAM: Kingston 800MHz CL5- 4x1GB - OK Graphic: EVGA 8800 GTX 768MB flashed to Quadro5600 - NVinject & v.bios by "aqua-mac.com" - OK Display: HP LP3065 2560x1600 - OK Geekbench 32: 7103 ; Openmark: 33216 ; Xbench: 307.65 without HD and 180.63 including slow Seagate HD OS X 10.5.2 (genuie retail DVD with "Is8 guide" and later "Davin guide") Link to comment Share on other sites More sharing options...
Recommended Posts