foureight84 Posted January 3, 2008 Share Posted January 3, 2008 Do you use vanilla or patched kernel? Do you use PC EFI? just patched. but i've installed the vanilla with the pc_efi patches. i'm guessing i should install vanilla and then use your patch huh? Link to comment Share on other sites More sharing options...
LS8 Posted January 3, 2008 Author Share Posted January 3, 2008 You should try that at least. I use vanilla kernel and sleep works for me (see my sig for details). Link to comment Share on other sites More sharing options...
aliab Posted January 3, 2008 Share Posted January 3, 2008 I'm not able to get wake-from-sleep working with vanilla install. Worked fine though with ToH RC2.Any tips, ls8? I just have this problem because i updated my mobo (DS3 rev1) to F8 BIOS I have return to F7 and that is perfect TO IS8 As i read in your script my install is slighty different # Remove incompatible vanilla kexts sudo rm -r /Volumes/$DESTINATION/System/Library/Extensions/AppleEFIRuntime.kext i do not remove this kext # ICH9R ATA drivers - without these kexts internal drivers are displayed as external sudo cp -r kext/IOATAFamily.kext /Volumes/$DESTINATION/System/Library/Extensions/ I do not use this kext not needed for my board I use to install all the updates before to run my post script Regards Link to comment Share on other sites More sharing options...
karaakeha1 Posted January 6, 2008 Share Posted January 6, 2008 I just have this problem because i updated my mobo (DS3 rev1) to F8 BIOS I have return to F7 and that is perfect TO IS8 As i read in your script my install is slighty different # Remove incompatible vanilla kexts sudo rm -r /Volumes/$DESTINATION/System/Library/Extensions/AppleEFIRuntime.kext i do not remove this kext # ICH9R ATA drivers - without these kexts internal drivers are displayed as external sudo cp -r kext/IOATAFamily.kext /Volumes/$DESTINATION/System/Library/Extensions/ I do not use this kext not needed for my board I use to install all the updates before to run my post script Regards Try F10 Just released !! Link to comment Share on other sites More sharing options...
LS8 Posted January 7, 2008 Author Share Posted January 7, 2008 i updated to BIOS F10, I can't see any difference in performance or functionality. Link to comment Share on other sites More sharing options...
DesertFox Posted January 8, 2008 Share Posted January 8, 2008 ls8, is your Shutdown working? I read this thread a week ago and back then you had an "OK" next to "Shutdown". What did you change? I have bought the same components that are mentioned in your sig. Link to comment Share on other sites More sharing options...
ddrdark Posted January 8, 2008 Share Posted January 8, 2008 i updated to BIOS F10, I can't see any difference in performance or functionality. BIOS F9 and F10 are giving problems with some memorys and memtest. Please read this post: http://forums.tweaktown.com/showthread.php?t=25765 I'm on F8... by the time... by the way I can't get to work sleep (even with your installation pack of kexts) and the BIOS settings of karaakeha1..maybe it's for my mobo REV (1.0) thanks! Link to comment Share on other sites More sharing options...
LS8 Posted January 8, 2008 Author Share Posted January 8, 2008 ls8, is your Shutdown working? I read this thread a week ago and back then you had an "OK" next to "Shutdown". What did you change? I have bought the same components that are mentioned in your sig.After I switched from NVInject to GFX EFI string, shutdown worked for me a few times. I thought problem is solved. But shutdown works only ocassionally, appox. in 50%....I can't get to work sleep...maybe it's for my mobo REV (1.0)...Maybe, but I think people with rev.1.0 reported sleep works on rev.1.0 Link to comment Share on other sites More sharing options...
Findibulator Posted January 8, 2008 Share Posted January 8, 2008 I'm up and running - EFI gave me boot problems so I'm on MBR. Everything is functional now, but I noticed I can't see the one IDE drive I have. 3 SATA drives and a SATA burner are showing up fine. Any thoughts on what's up with my IDE? I'm using the kexts included in the pack. Link to comment Share on other sites More sharing options...
FavleX Posted January 8, 2008 Share Posted January 8, 2008 BIOS F9 and F10 are giving problems with some memorys and memtest. Please read this post: http://forums.tweaktown.com/showthread.php?t=25765 I'm on F8... by the time... by the way I can't get to work sleep (even with your installation pack of kexts) and the BIOS settings of karaakeha1..maybe it's for my mobo REV (1.0) thanks! HI Everywhere , the ds4 ,owners are reporting as the best bios release , the F7 , why do u prefer the F8 instead ? Link to comment Share on other sites More sharing options...
LS8 Posted January 8, 2008 Author Share Posted January 8, 2008 I'm up and running - EFI gave me boot problems so I'm on MBR.EFI has nothing to do with MBR. You can use EFI with both MBR and GUID PT.Everything is functional now, but I noticed I can't see the one IDE drive I have.You need JMicron (JMB363) driver. I don't use any IDE device but I think the driver exists. Hopefully someone can provide a link? If someone confirms it works, I can release updated drivers pack.HIEverywhere , the ds4 ,owners are reporting as the best bios release , the F7 , why do u prefer the F8 instead ?It looks like F8 is latest stable BIOS, many users have problems with F9 and F10. F10 works fine for me so far, but I will downgrade to F8 if I find any problem. Link to comment Share on other sites More sharing options...
DesertFox Posted January 9, 2008 Share Posted January 9, 2008 Im using the WD5000AAKS HD and it only recognized as a 128GB drive in the Kalyway installer. I also deleted/partitioned it as a Mac OS Extended (Journaled) but still only see 128GB. Any suggestions? Should I change something in the BIOS? Link to comment Share on other sites More sharing options...
LS8 Posted January 9, 2008 Author Share Posted January 9, 2008 BIOS Settings: SATA RAID/AHCI Mode: AHCI SATA Port 0-3 Native Mode: Enabled Onboard SATA/IDE Device: Enabled Onboard SATA/IDE Ctrl Mode: AHCI ACPI Suspend Type: S3 (STR) SATA HDD and SATA DVD connected to the orange ports (ICH9R), not to the purple (violet) ports (Gigabyte GBB363) Link to comment Share on other sites More sharing options...
DesertFox Posted January 9, 2008 Share Posted January 9, 2008 ls8, Question about your pre-patch.sh file. Are these settings correct of my disk Identifier reads as "Disk Identifier : disk1s3" from Disk Utility. sudo diskutil umount /dev/disk1s3 cd pc_efi_v80/ sudo ./startupfiletool /dev/rdisk1s3 ./boot_v8 sudo dd if=./guid/boot1h of=/dev/rdisk1s3 bs=512 count=1 sudo dd if=./guid/boot0 of=/dev/disk1 bs=400 count=1 Here is the output from the terminal (Im doing this on a powerbook g4 tiger) system:~/Desktop/LEO-GA-P35-DS4 kristen$ /Users/kristen/Desktop/LEO-GA-P35-DS4/pre-patch.sh Disk Utility Tool Utility to manage local disks and volumes. Most options require root access to the device Usage: diskutil <verb> <options> <verb> is one of the following: list (List the partitions of a disk) information | info (Get information on a disk or volume) unmount (Unmount a single volume) unmountDisk (Unmount an entire disk (all volumes)) eject (Eject a disk) mount (Mount a single volume) mountDisk (Mount an entire disk (all mountable volumes)) rename (Rename a volume) enableJournal (Enable HFS+ journaling on a mounted HFS+ volume) disableJournal (Disable HFS+ journaling on a mounted HFS+ volume) verifyVolume (Verify the structure of a volume) repairVolume (Repair the structure of a volume) verifyPermissions (Verify the permissions of a volume) repairPermissions (Repair the permissions of a volume) repairOS9Permissions (Repair the permissions for the current Classic boot volume) eraseDisk (Erase an existing disk, removing all volumes) eraseVolume (Erase an existing volume) reformat (Reformat an existing volume) eraseOptical (Erase an optical media (CD/RW, DVD/RW, etc.)) zeroDisk (Erase a disk, writing zeros to the media) randomDisk (Erase a disk, writing random data to the media) secureErase (Securely erase a disk or freespace on a volume) resizeVolume (resize a volume, increasing or decreasing its size) partitionDisk ((re)Partition a disk, removing all volumes) createRAID (Create a RAID set on multiple disks) destroyRAID (Destroy an existing RAID set) checkRAID (Check a RAID set for errors) enableRAID (Convert a disk to a degraded RAID mirror set) convertRAID (Convert a RAID 1.x (pre-Tiger) to a RAID 2.x (Tiger)) updateRAID (Update the settings of an existing RAID) addToRAID (Add a spare or member disk to an existing RAID) removeFromRAID (Remove a spare or member disk from an existing RAID) repairMirror (Repair a damaged RAID mirror set) diskutil <verb> with no options will provide help on that verb ./startupfiletool: ./startupfiletool: cannot execute binary file 1+0 records in 1+0 records out 512 bytes transferred in 7.293329 secs (70 bytes/sec) dd: /dev/disk1: Resource busy Also in the pre-patch.sh file you mention that you "prefer instalation from another Leopard partition, using original unpatched genuine retail DVD)". Do you mean that you being installation from an existing Leopard partition and then boot into the installer? or is there some other method. Is it possible to do the whole install by having the HD attached to my powerbook and once install completes, just moving over to the hackintosh and replacing the kexts? Is this the way you have done it? Atm i have used the pre-patch.sh and now im going to boot from kalyway... Do I just deselect all patches and apply your post-patch.sh? Thanks in advance! PS my HD and DVD was connected to the yellow ports... thx. Link to comment Share on other sites More sharing options...
rhalls Posted January 9, 2008 Share Posted January 9, 2008 o.k,., i didnt read your entire posts nor the whole thread. But: "dd: /dev/disk1: Resource busy" means that you have to unmount your drive before applying the EFI Patch. Link to comment Share on other sites More sharing options...
DesertFox Posted January 9, 2008 Share Posted January 9, 2008 i unmounted the drive and applied the pre-patch.sh ./startupfiletool: ./startupfiletool: cannot execute binary file 1+0 records in 1+0 records out 512 bytes transferred in 0.131921 secs (3881 bytes/sec) 1+0 records in 1+0 records out 400 bytes transferred in 0.225570 secs (1773 bytes/sec) should i be worried about the line "./startupfiletool: ./startupfiletool: cannot execute binary file" ? Link to comment Share on other sites More sharing options...
LS8 Posted January 9, 2008 Author Share Posted January 9, 2008 ...Im doing this on a powerbook g4 tiger...AFAIK PC EFI can only be installed from Intel machines....should i be worried about the line "./startupfiletool: ./startupfiletool: cannot execute binary file" ?Yes. That means PC EFI cannot be installed. Link to comment Share on other sites More sharing options...
DesertFox Posted January 9, 2008 Share Posted January 9, 2008 Is it possible to install EFI from Kalyway 10.5.1 installer, which will function with your setup method? Edit: I applied the pre-patch.sh on a G4 machine and EFI was not installed. Then I continued installing from the Kalyway disc, from which i chose vanilla kernel, nvinject, efi. Everything seemed to go smooth. After the install i also applied the post-patch.sh, but sound did not work. Restart didnt work either. After I did the Software Update and turned the machine on, I get a DISK boot failure. Seems like I will have to prob install from the retail dvd. Link to comment Share on other sites More sharing options...
firewire_666 Posted January 9, 2008 Share Posted January 9, 2008 I have difficulties with my gigabit ethernet. I installed Kalyway 10.5.1 with EFI/vanilla - no lan. I installed the post-install files from this pack - no ethernet. Card is listed but status is: cable unplugged Link to comment Share on other sites More sharing options...
LS8 Posted January 9, 2008 Author Share Posted January 9, 2008 You probably have Windows also? You need to set "Wake from LAN = enabled" in Windows. Link to comment Share on other sites More sharing options...
LS8 Posted January 9, 2008 Author Share Posted January 9, 2008 ...EFI was not installed...I continued installing from the Kalyway disc...I did the Software Update and turned the machine on, I get a DISK boot failure... You cannot use software update if you don't have PC EFI installed !!! Link to comment Share on other sites More sharing options...
foureight84 Posted January 9, 2008 Share Posted January 9, 2008 BIOS F9 and F10 are giving problems with some memorys and memtest. Please read this post: http://forums.tweaktown.com/showthread.php?t=25765 I'm on F8... by the time... by the way I can't get to work sleep (even with your installation pack of kexts) and the BIOS settings of karaakeha1..maybe it's for my mobo REV (1.0) thanks! actually i'm on F9 right now and it seems more rock solid than F8. I had 2gb when using F8 and it would fail memtest. however, when i moved to F9, I upgraded my ram to 4GB (4 slots) and memtest does not give any errors even with the old sticks. I don't really see any difference in terms of perfomance with these bios releases. they only add compatibility. you should always make note that if your hardware is perfect on the current bios, don't upgrade unless you have to. also, i can't get sleep to work either. been trying the install pack with vanilla kernel. i'm on the rev. 2.0 p35-ds4. i have no idea why it's not working for me. moreover, sometimes i can't even shutdown. it just hangs. Link to comment Share on other sites More sharing options...
firewire_666 Posted January 9, 2008 Share Posted January 9, 2008 You probably have Windows also? You need to set "Wake from LAN = enabled" in Windows. Thanks Link to comment Share on other sites More sharing options...
LS8 Posted January 9, 2008 Author Share Posted January 9, 2008 details: http://forum.insanelymac.com/index.php?showtopic=70065 Windows by default disables the NIC at Windows shutdown time in order to disable Wake-On-Lan, and the NIC will remain disabled until the next time Windows turns it on. The driver does not know how to turn the NIC on from this disabled state when starting up in another OS; therefore, the device will not respond, even if the driver loads and reports that the device is up. To work around this problem, simply enable the feature "Wake-on-lan after shutdown." You can set this option through Windows' device manager. Here's how: - Boot up Windows - Right click on My Computer - Click on Properties -- Hardware -- Device Manager - Expand your network card section and double click on your network card - Set "Wake-on-lan after shutdown" to 'enabled' Link to comment Share on other sites More sharing options...
DesertFox Posted January 10, 2008 Share Posted January 10, 2008 Is RAID possible with this p35-ds4 board under Leopard? Link to comment Share on other sites More sharing options...
Recommended Posts