Mastablasta Posted October 27, 2008 Share Posted October 27, 2008 I get to the setup great and do all the instructions perfect from where I found at http://www.youtube.com/watch?v=nNZi5fLpqus That video is great omg! Acronis works so good! When I get to setup though my mouse ownt move.. keyboard works but I have to have running mouse to get to ckick on partitions and finish install. Any suggestiosn for why my mouse isnt working? I have tried 2 different types of mouses now.. My mouses work in xp fine! nEED HELP PLEASE SO CLOSE!!!!!!!!!!!!! got mouse to work finnaley does mac accept usb mouses only and no green shaped pc mouses? Link to comment Share on other sites More sharing options...
fertigo Posted November 14, 2008 Share Posted November 14, 2008 hey kaly when you release a new version?it would be cool to have the newest version of leopard, im still under 10.5.2 my last update try to 10.5.3 failed so im using the stable 10.5.2 version. thx for the great work cheers! Link to comment Share on other sites More sharing options...
AJF355 Posted November 23, 2008 Share Posted November 23, 2008 Hi guys! I was stupidly ex[erimenting on my laptop that I desperately need for school tomorrow. I installed kalyway with no problems although, when I tried to start it up, I get the apple loading screen then it goes away and i have 2/3 of the screen white then another bit is a very faded mac leopard background, and some grey. I really need to get it working so that I can reset my MBR to vista again (the vista install disc is scratched so, i need to restore it another way. If anyone has any ideas, please let me know ASAP thank you Andrew Link to comment Share on other sites More sharing options...
Khiron Posted November 23, 2008 Share Posted November 23, 2008 I really need to get it working so that I can reset my MBR to vista again (the vista install disc is scratched so, i need to restore it another way. If anyone has any ideas, please let me know ASAP thank you Andrew I'm not sure just how much you can accomplish if you manage to get leopard working. I think the bootloader is capable to boot other devices, but don't take my word for it, I haven't really messed up with it. You seriously must get a working copy of Vista, or at the least (if you're not worried of a couple more experiments) get a Gparted cd. Gparted is a partition manager you can use to make modifications to your partitions, including fixing the MBR. Link to comment Share on other sites More sharing options...
megaboem Posted December 18, 2008 Share Posted December 18, 2008 hey i would like to know if bootcamp is inculde with kalyway 10.5.5? greets Link to comment Share on other sites More sharing options...
tracksleepy Posted December 19, 2008 Share Posted December 19, 2008 i downloaded and burned the kalyway disc but every time when i boot it stops and says: still waiting for root divice i left it like that for hours and it kept saying the same thing so i burned another copy and it said the same thing My processor is AMD Athalon 64 x2 dual Core Processer 4400+ Memmory 2.00GB i am not even sure if kalyway will work on my computer pls help!!!! Link to comment Share on other sites More sharing options...
Racer436 Posted December 29, 2008 Share Posted December 29, 2008 i downloaded and burned the kalyway disc but every time when i boot it stops and says: still waiting for root divice i left it like that for hours and it kept saying the same thing so i burned another copy and it said the same thing My processor is AMD Athalon 64 x2 dual Core Processer 4400+ Memmory 2.00GB i am not even sure if kalyway will work on my computer pls help!!!! PLEASE HELP! I know this is probably a N00B Question, but wen I try to boot from this I get "Still looking for root device" Please help. System: Processor BrandIntel® Processor PlatformIntel® Centrino® ProcessorIntel® Core™2 Duo Mobile Processor Speed2.0GHz Display TypeWXGA TFT-LCD widescreen with TruBrite technology (1280 x 800) Screen Size15.4" System Bus800MHz Cache Memory2MB on die Level 2 System Memory (RAM)4GB Type of Memory (RAM)PC6400 DDR2 SDRAM Hard Drive TypeSerial ATA (5400 rpm) Hard Drive Size320GB Optical DriveDouble-layer DVD±RW/CD-RW Optical Drive Speeds8x DVD+R DL; 6x DVD-R DL; 8x8x8 DVD+RW; 8x6x8 DVD-RW; 5x DVD-RAM; 24x16x24 CD-RW Direct-Disc LabelingYes Digital Media Reader or SlotsYes, digital media card reader GraphicsATI Mobility RADEON HD 3470 Video Memory256MB discrete and up to 1790MB dynamically allocated memory (2046MB total) Personal Video Recorder (PVR)No TV TunerNo MPEGYes Built-in WebcamYes Modem56 Kbps* *Capable of receiving 56 Kbps downloads. However, current regulations limit download speed to 53 Kbps. NetworkingBuilt-in 10/100 Mbps Ethernet LAN (RJ-45 connector) Wireless NetworkingWireless-A+B+G+N Bluetooth-EnabledNo S-Video Outputs1 Additional Audio/Video ConnectorsHDMI AudioHarman/Kardon SpeakersBuilt-in PCMCIA Slots1 ExpressCard/34/54 USB 2.0 Ports3 IEEE 1394 FireWire Ports1 Parallel PortsNone Serial PortsNone Game PortsNone Laptop WeightStandard (more than 5.5 lbs.) Battery TypeLithium-ion Pointing DeviceTouchpad Operating SystemWindows Vista Home Premium 64-bit with SP1 Link to comment Share on other sites More sharing options...
mike-ukr Posted January 10, 2009 Share Posted January 10, 2009 PLEASE HELP! I know this is probably a N00B Question, but wen I try to boot from this I get "Still looking for root device" Please help. System: Processor BrandIntel® Processor PlatformIntel® Centrino® ProcessorIntel® Core™2 Duo Mobile Processor Speed2.0GHz Display TypeWXGA TFT-LCD widescreen with TruBrite technology (1280 x 800) Screen Size15.4" System Bus800MHz Cache Memory2MB on die Level 2 System Memory (RAM)4GB Type of Memory (RAM)PC6400 DDR2 SDRAM Hard Drive TypeSerial ATA (5400 rpm) Hard Drive Size320GB Optical DriveDouble-layer DVD±RW/CD-RW Optical Drive Speeds8x DVD+R DL; 6x DVD-R DL; 8x8x8 DVD+RW; 8x6x8 DVD-RW; 5x DVD-RAM; 24x16x24 CD-RW Direct-Disc LabelingYes Digital Media Reader or SlotsYes, digital media card reader GraphicsATI Mobility RADEON HD 3470 Video Memory256MB discrete and up to 1790MB dynamically allocated memory (2046MB total) Personal Video Recorder (PVR)No TV TunerNo MPEGYes Built-in WebcamYes Modem56 Kbps* *Capable of receiving 56 Kbps downloads. However, current regulations limit download speed to 53 Kbps. NetworkingBuilt-in 10/100 Mbps Ethernet LAN (RJ-45 connector) Wireless NetworkingWireless-A+B+G+N Bluetooth-EnabledNo S-Video Outputs1 Additional Audio/Video ConnectorsHDMI AudioHarman/Kardon SpeakersBuilt-in PCMCIA Slots1 ExpressCard/34/54 USB 2.0 Ports3 IEEE 1394 FireWire Ports1 Parallel PortsNone Serial PortsNone Game PortsNone Laptop WeightStandard (more than 5.5 lbs.) Battery TypeLithium-ion Pointing DeviceTouchpad Operating SystemWindows Vista Home Premium 64-bit with SP1 Hi,Dune and Kally,installed 10.5.2 on toshiba nb 100,can't get resolution change sinse the card id 0x27ae gma 950 maybe you can help me Link to comment Share on other sites More sharing options...
Panasa Posted January 10, 2009 Share Posted January 10, 2009 anyone know what the torrent DVD size..! It's about 3.5gb Link to comment Share on other sites More sharing options...
PhAsR Posted January 10, 2009 Share Posted January 10, 2009 i first want to say hi to every1 on this forum cause i am new to this community! soooo i installed kalway and i used easy bcd to dual boot my vista and kalway , when i try to load osx everything goes fine until i get the loading screen with the logo, it keeps loading forever... i hope some1 can help me out Link to comment Share on other sites More sharing options...
hascosx Posted January 11, 2009 Share Posted January 11, 2009 how to update 10.5.4 up to 10.5.6? i have kalyway 10.5.3 and how instal driver nvidia 9600 gt 1024? (1g memori) ASAP have a nice day Link to comment Share on other sites More sharing options...
quadrafox888 Posted January 11, 2009 Share Posted January 11, 2009 can you update this to 10.5.6 using the software update utilitie? because i don't want to do it if it would brick my system. lewisp running kalyway 10.5.2 Link to comment Share on other sites More sharing options...
planlos1 Posted January 25, 2009 Share Posted January 25, 2009 when i choose MAC OS X on boot it says NTLDR missing? Can anyone help? Link to comment Share on other sites More sharing options...
dan7637 Posted January 29, 2009 Share Posted January 29, 2009 i have an HP a6330f PC with stock configuration (desktop) HOW CAN I INSTALL KALYWAY 10.5.2 AMD/INTEL ON MY COMPUTER? AMD Athlon 64 X2 Dual-Core 5600+ 2.8 Ghz NVIDIA GeForce 6150SE with these motherboard specs: Motherboard description Motherboard manufacturer's name: Asus M2N68-LA HP/Compaq name: Narra2-GL8E CPU/Processor Socket: AM2 Supports the following processors: Athlon 64 X2 with Dual Core technology Athlon 64 Sempron Front-side bus (FSB) 2000MT/s (2.0 GT/s) Chipset NVIDIA GeForce 6150SE nForce 430 BIOS features System BIOS core brand: Award Keyboard combination to used to enter BIOS: F10 Form factor Micro-ATX: 9.6 in X 9.6 in Memory Dual channel memory architecture Four 240-pin DDR2 DIMM sockets Supported DIMM types: PC2-4200 (533 MHz) PC2-5300 (667 MHz) PC2-6400 (800 MHz) [*]Non-ECC memory only, unbuffered [*]supports 2GB DDR2 DIMMs [*] Supports up to 8 GB on 64 bit PCs [*]Supports up to 4 GB* on 32 bit PCs NOTE: *Actual available memory may be less Expansion slots Two PCI One PCI Express x16 graphics (for a graphics card) One PCI Express x1 (for cards such as network, sound, tv-tuner) Video graphics Integrated graphics using nVidia GeForce 6150SE Up to 256MB (with 512MB or more PC memory) Also supports PCI Express x16 graphics cards* NOTE: *Either integrated graphics or the PCI Express x16 slot are usable at one time; they are not usable concurrently. Parallel ATA One 40-pin UltraDMA 100/66/33 connector Supports PIO, multi-word DMA modes Supports two PATA disk drives on one PATA ribbon cable (two drives total) Serial ATA Four SATA connectors: SATA1 = Black SATA2 = White SATA3 = Blue SATA4 = Yellow Supports 1 SATA-150 or SATA-300 disk drive on each SATA connector Speed up to 1.5Gb/sec or 3.0Gb/sec, complying with SATA 1.0 and SATA 2.0 specifications NOTE: The faster rate of 3.0Gb/sec requires that both the hard drive and the motherboard support it. If one or the other does not support 3.0 Gb/sec, the PC negotiates down to the slower 1.5 Gb/sec. RAID Some Narra2 models ship with RAID (model dependent) nVidia's onboard RAID solution is called nVidia MediaShield Storage RAID modes supported*:RAID 0 RAID 1 NOTE: RAID 5 and 10 are not supported by this motherboard. Onboard audio 8 channel high-definition audio Audio CODEC: ALC888S Onboard LAN PCI Realtek RTL8201N 10/100 Mbps LAN PHY Onboard USB USB 2.0 Ten ports total Four connectors on back panel additional headers on motherboard support 6 additional ports/devices NOTE: Some USB ports may not be available externally for customer use. For more information, see model specifications. Onboard 1394 Type: IEEE 1394a 400Mb/s Agere LFW3226-100 (or equivalent) controller chip Two ports total One port on back panel One header on motherboard supporting one additional port/device Back panel I/0 One PS/2 mouse port (green) One PS/2 keyboard port (purple) One Coaxial SPDIF out port One VGA port Four USB 2.0 One IEEE 1394a One RJ-45 networking port Six audio ports support 8-channel audio: Line-in (light blue) Microphone-in (pink) Line-out (lime) Center/Subwoofer-out (yellow-orange) Side speaker-out (gray) Rear speaker-out (black) Internal connectors One 24-pin ATX power connector One 4-pin ATX power connector One PATA connector Four SATA connectors One floppy drive connector Two 12v fan connectors for CPU fan and PC fan One 9-pin header for power button, reset button, power LED, and HDD LED One SPDIF digital audio output header One front line input connector (interupts line input on back panel, Vista capable, requires matching front audio jack module) One 9-pin audio header for headphone-out and microphone-in (yellow, Vista capable, requires matching front audio jack module) Four USB headers supporting 6 additional USB 2.0 ports or devices One 1394a header One Intel high-definition Audio/Modem Link (not used by HP) One jumper for resetting BIOS settings One jumper to disable BIOS password checking if you have an answer email me at daniel7637@live.com Link to comment Share on other sites More sharing options...
zyberstrom Posted February 12, 2009 Share Posted February 12, 2009 guys had a still waiting for root device here already tried playing with bios disabled sata,lan usb etc but no use pc specs http://h10025.www1.hp.com/ewfrf/wc/documen...product=3198158 added nvidia 8400gs 2gb =1x1gb trancend ddr2 ram 1lgdvd burner to the original system irc chat is not coming it just displays a white screen on all browsers with java runtime installed so help would be appreciated NOTE tried new kaly's dvd it gave a kernel panic same with iatkos5i jaS gave the same still waiting for root device Link to comment Share on other sites More sharing options...
birdster Posted February 13, 2009 Share Posted February 13, 2009 thanx Link to comment Share on other sites More sharing options...
Lor-ron Posted March 18, 2009 Share Posted March 18, 2009 I have tried Unsuccessfully to upgrade my Kalyway Leopard from 10.5.3 to 10.5.6 Countless Times and has Always ended with a System Boot Freeze on StartUp but with the help of a Self Modified Version of LTL's Post Patcher and some Custom Kext Files for my Asus P5K-E Wifi AP Motherboard I was able to get it Done! 1.) Use Kalyway's Method to Upgrade to 10.5.3 if you are not using this Version already... (I used the Vanilla Kernel) 2.) Download and Install the 10.5.6 Combo Update from Apple (668Mb)... Do Not Reboot!!! http://www.apple.com/downloads/macosx/appl...omboupdate.html 3.) Edit the Post-Patch.sh File Located in the v4.4 Folder with the Name of Your Leopard Install Hard Drive (Located at the Top of the Page) (Ex; Destination=yourharddrivename) Save and use the Following Command Lines to Run the Program from Terminal... . Open Terminal . TYPE or cut n past into Terminal: sudo -s . enter your password . TYPE or cut n paste into Terminal: /usr/sbin/vsdbutil -a /Volumes/Leopard320 <==== (Rename this to your Hard Drive Volume) . TYPE or cut n paste into Terminal (change yourusernamehere to your username): cd /users/yourusernamehere/desktop/v4.4 . TYPE or cut n paste into Terminal: ./post-patch.sh . after it finishes TYPE: Exit and Press Enter. . Reboot Your PC and Press F8 at the Darwin Prompt and Type: Update -v and Hit Enter. Download My Modified PostPatch Prog Here: http://rapidshare.com/files/210680288/v4.4.zip.html Link 2: http://www.mediafire.com/file/dgnj21ygmnt/v4.4.zip Congratulations you are now running Leopard 10.5.6!!! Link to comment Share on other sites More sharing options...
satyanjoy Posted March 20, 2009 Share Posted March 20, 2009 KALYWAY LEOPARD 10.5.1 intel SSE2 and SSE3 Only (with 512 MB of RAM)!!! efi v8 follow link for kalyway 10.5.2 intel amd sse2 sse3 DVD Please stop endlessly re-posting the following questions AND READ THE THREAD (or at least do a thread search) All IchX and Jmicron compatible !!! but still problem with ide dvdrom on jmicron controller! Read carefully !!! designed and repacked by KALYWAY! additionnal scripting and customs drivers by DUNE ! you can try vanilla kernel at dvd boot ! just type vanilla after f8 !!! you can use Diskutility to format the whole hd as you want ( guid or mbr)! then select custom install !!! this installer will set hd bootable for you ! just have to select boot guid or boot mbr depending on what partition map you have chosen before with diskutility ! CAUTION for mbr choice: we advise you to use an empty disk but if you have no other choice than installing Leo on a disk where windows is already installed, you should be aware of that the installer will active the leo partition, so to be able to boot again on your windows, you should install a bootloader (eg. Grub) , or you can active back the windows partition with fdisk and use chain0 (if your leo partition is under the 200gb of the HD). FIXES include : x11 update (resolve issue wit gimp and some x11 app! ; directoryservices ; otools (resolve packages maker crashes) Some drivers extras setting are present (Only select one driver for each section!! ) sleep kernel 9.1 install by default ! intel sse2 system video drivers audio drivers network drivers Vanilla kernel and acpi vanilla (wit reboot fix and ps2 support) ( you must select both of them) ACPIPlatform with new PS2Fix (PS2 KB/USB Mouse) ACPIPlatform with new PS2Fix (PS2 KB/USB Mouse) bootloader guid or mbr Additionnals applications ! fairmount (dvd decript that work with vlc) VLC (video players for divx and various format) perian codec for quicktime (divx and various unsupported quicktime formats) Better zip (archive utility) Pacifist (pkg extractor and installer) kexthelper ( kext installer for noobz) transmission ( light weight torrent client) Google notifier (menubar notifier for your gmail account) PPF-O-Matic ( utility for applying ppf patch) stuffit expander ( for extract sit rar and zip archives) Change finder ( make visible or invisible system files) Colloquy (irc client) Solarseek (soulseek client) i have make a restore app ! for Restore_Factory_Desktop_finder_settings Restore_Factory_Desktop_Finder_settings (default background,icons,dock) for change orange colour in window finder! right click on orange colour then Show view options and select background white !! use by default ! new users accounts will be virgin ! CAN BE USED ON ALL 10.5.x DISTRO !!! it's all !! KALYWAY DVD DONATIONS (contribute to leo osx86 developpement dvd) MD5 for KALYWAY_LEO_10.5.1_intell_SSE2_SSE3.zip aff692cfe4daaae471f528974f5bac07 MD5 for kalyway_leo_10.5.1.iso f8546bde2a5b3c7dff47f2aab31862a9 THANKS TO ALL OSX86 COMMUNITY and TEAM OF HACKINTOSH !! IRC irc.osx86.hu #Kalyway.DVD Specials thanks to netkas , def , turbo ; asap , jccool ,joblo,dan , rofl , joe75 , kabyl , Chiva4ry and all the others !!! Please stop endlessly re-posting the following questions AND READ THE THREAD (or at least do a thread search) To Apple: Think of this as of a demo version and as of a free marketing campaign. Therefore, let it be ENJOY ! if you love MacOSX think to buy it !!! This DVD should only be used to preview Mac OS X Leopard. If you really like Mac OS X Leopard and you want to use it, you should get a real Mac. If buying a real Mac is too much, you can, at least, buy a license for Mac OS X Leopard.[ thanks Link to comment Share on other sites More sharing options...
sailershen Posted March 22, 2009 Share Posted March 22, 2009 what's the link of download max ox 10.5.1? Link to comment Share on other sites More sharing options...
virgo123 Posted March 28, 2009 Share Posted March 28, 2009 Hi I am trying to install this on my laptop i have vgnfj78gp sony vaio, with 2GB ram and 2Ghz processor, i am stuck at a point at the time if beginning to install see attached file, i have pre installed OS on my laptop i.e. windows XP , fedora 7 i have following partition NTFS for xp and ext2 for fedora, i have prepared fat32 for this mac OSX but not sure why i am stuck at this point whenever i am trying to install OS Link to comment Share on other sites More sharing options...
dimiszk Posted April 1, 2009 Share Posted April 1, 2009 thanksss Link to comment Share on other sites More sharing options...
jades Posted May 10, 2009 Share Posted May 10, 2009 i downloaded and burned the kalyway disc but every time when i boot it stops and says: still waiting for root divice i left it like that for hours and it kept saying the same thing so i burned another copy and it said the same thing My processor is AMD Athalon 64 x2 dual Core Processer 4400+ Memmory 2.00GB i am not even sure if kalyway will work on my computer pls help!!!! iT WORKED FOR ME aTHLON 4400-2.3 GHZ DYNET-3 GB RAM Gigabyte motherboard m61sme-s31 nforce ethernet(had to use forcedeth) sound is working too Its perfect to install.. iam now proceeding to update it to 10.5.5 Dont update using apple software update... kernel panicks Applications dont run(quicktime/itunes) So go ahead and grab one...go for 10.5.2 Link to comment Share on other sites More sharing options...
JaDz Posted June 2, 2009 Share Posted June 2, 2009 I am getting this error. Can anyone please help? Link to comment Share on other sites More sharing options...
MaximusPrime23 Posted June 10, 2009 Share Posted June 10, 2009 Quick question for anyone! I don't understand the "add kext to dvd boot" process. Can someone throw me a bone here! Maybe (most likely) a quick step by step. Please and thank you! Link to comment Share on other sites More sharing options...
williamsims1313 Posted July 20, 2009 Share Posted July 20, 2009 still keep getting "looking for root device" any help? Link to comment Share on other sites More sharing options...
Recommended Posts