Jump to content

KALYWAY 10.5.1 DVD release (the official)

kaly

By kaly,
in OSx86 10.5 (Leopard)

 Share
2,627 posts in this topic

Recommended Posts

spanakorizo
spanakorizo
Posted
Posted

if somebody is at kalyway now please check something..

i need to short out why it crash

so i noticed a folder in root (c:) named backup

and inside there were some important kexts

then i went to ../extensions and i noticed that those kexts are not there!

kexts like: appleSMBIOS.kext should not been in extensions??

or this happened only in me?

another important kext :intelcpupowermanagement.kext ...do you have it in extensions?

plz reply

Link to comment
Share on other sites
-DuNe-
-DuNe-
Posted
Posted
if somebody is at kalyway now please check something..

i need to short out why it crash

so i noticed a folder in root (c:) named backup

and inside there were some important kexts

then i went to ../extensions and i noticed that those kexts are not there!

kexts like: appleSMBIOS.kext should not been in extensions??

or this happened only in me?

another important kext :intelcpupowermanagement.kext ...do you have it in extensions?

plz reply

 

All the kext in the drawer backup are the "original" kext of leo , they are replaced in the extensions system by patched one.

Of course there's a AppleSmbios in your Extension folder. btw, AppleCpuPowermanagement need to be deleted from the system

for avoid cpu heating. It is why you don't see it in Extensions.

 

I don't know what you choose at install but for your P5K premium (witch is very similar to the P5K-E/wifiap used for developement)

the best choices are:

 

Vanilla_Kernel

Vanilla_ACPI_Fix

 

AZALIA_ADI1988B

Realtek_WIFI

EFI(guid or mbr depending from your choice in diskutil)

 

and you bios setting:

 

Cpu Configuration:

 

Max CPUID Value Limit [Disabled]

Execute Disable Bit [Enabled]

 

SatA Configuration:

 

Configure SATA as [AHCI]

 

Onboard Device Configuration:

 

JMicron controller Mode [AHCI]

 

 

Power:

 

Suspend Mode [AUto] or [s3 only]

Repost Video on S3 Resume [Disabled]

ACPI 2,0 Support [Enabled]

ACPI APIC Support [Enabled]

 

PCIPnP:

 

Plug And Play Os [Yes]

 

Advanced Chipset Settings:

 

Memory Remap Feature [Enabled]

 

 

Don't forget after install to uncheck the disk sleep feature in prefs. This feature is the source of a lot of problems.

 

Leopard is extremely stable on these boards P5K-E, Premium, and Deluxe. So you have one of the best mobo for running leopard.

Link to comment
Share on other sites
chival4ry
chival4ry
Posted
Posted

To Dune31

I need your support. ( BJMoose` question : http://forum.osx86scene.com/viewtopic.php?...62&start=60 ) ^^

And, I could not use the from_vmware6_to_native installation. Is it possible in the next version?

( http://img137.imageshack.us/my.php?image=k...lvmware6ww1.jpg )

 

To defiacnenl

Sound[AppleAzaliaAudio.kext] works fine (2 channel), but internet don`t work. ( http://forum.osx86scene.com/viewtopic.php?f=16&t=2566 )

 

To InsanelyOne

( This may be a stupid question, but can I do an Archive and Install over an existing 10.4.11 installation? )

I upgrade-installed a leopard-beta(9a499) over a 10.4.10, and it worked fine, so it is likely to work. ( but, in your risk )

Link to comment
Share on other sites
Jazzwitherspoon
Jazzwitherspoon
Posted
Posted

Ok, I'm begging you guys.

 

Can someone tell me if there's any solution to the /com.apple.boot.plist not found error when trying to boot the installation DVD, meaning the initial boot, and not after installation?

 

I am using a USB DVD drive, and I don't believe my mobo has the JMicron controller, as I have a P4 on 478 socket mobo.

 

 

Dune or Kaly, can one of you please answer this question?

Link to comment
Share on other sites
justvisiting
justvisiting
Posted
Posted
Ok, I'm begging you guys.

 

Can someone tell me if there's any solution to the /com.apple.boot.plist not found error when trying to boot the installation DVD, meaning the initial boot, and not after installation?

 

I am using a USB DVD drive, and I don't believe my mobo has the JMicron controller, as I have a P4 on 478 socket mobo.

Dune or Kaly, can one of you please answer this question?

 

*) can your USB DVD drive boot other CDs?

*) can your Kalyway disc boot other computers?

*) Is your BIOS configured to enable USB boot devices?

Link to comment
Share on other sites
MuffinFlavored
MuffinFlavored
Posted
Posted

I obtained Kalyway 10.5.1, and burnt it to a SL DVD-RW.

When I do a regular bootup, I create my one MBR partition, select EFI MBR, and select Vanilla kernel, and I get an "Error installing the "Essentials" package", asking me to restart.

 

When I do a "vanilla -v", I succeed all the way until the text gets white, the resolution gets higher, and within 2 seconds, it reboots back to BIOs.

 

What am I doing wrong?

Gigabyte P35-DQ6 AHCI 0-3 Native

Intel Core 2 Quad Q6700

Link to comment
Share on other sites
defiacnenl
defiacnenl
Posted
Posted
All the kext in the drawer backup are the "original" kext of leo , they are replaced in the extensions system by patched one.

Of course there's a AppleSmbios in your Extension folder. btw, AppleCpuPowermanagement need to be deleted from the system

for avoid cpu heating. It is why you don't see it in Extensions.

 

I don't know what you choose at install but for your P5K premium (witch is very similar to the P5K-E/wifiap used for developement)

the best choices are:

 

Vanilla_Kernel

Vanilla_ACPI_Fix

 

AZALIA_ADI1988B

Realtek_WIFI

EFI(guid or mbr depending from your choice in diskutil)

 

and you bios setting:

 

Cpu Configuration:

 

Max CPUID Value Limit [Disabled]

Execute Disable Bit [Enabled]

 

SatA Configuration:

 

Configure SATA as [AHCI]

 

Onboard Device Configuration:

 

JMicron controller Mode [AHCI]

 

 

Power:

 

Suspend Mode [AUto] or [s3 only]

Repost Video on S3 Resume [Disabled]

ACPI 2,0 Support [Enabled]

ACPI APIC Support [Enabled]

 

PCIPnP:

 

Plug And Play Os [Yes]

 

Advanced Chipset Settings:

 

Memory Remap Feature [Enabled]

 

 

Don't forget after install to uncheck the disk sleep feature in prefs. This feature is the source of a lot of problems.

 

Leopard is extremely stable on these boards P5K-E, Premium, and Deluxe. So you have one of the best mobo for running leopard.

 

 

Hi Dune

Quick question,

i cannot put the sata in ahci, only the jmicron sata can be configured as ahci.

 

Funny thing tho, when i hook the dvd rom sata to jmicron

and hdd 2, the install is very fast, ake about 20 mins

 

when the sata dvd is on the other controller install takes ages (1h40m)

 

 

also, i managed to install a couple of times but i cannot get into the system, it keeps telling me to reboot (get a grey screen with a black square with text in 4 languages wich tells me to reboot)

Link to comment
Share on other sites
b:z
b:z
Posted
Posted

After downloaded the zip torrent from thepiratebay, i got CRC error when tried to unzip by winzip/7zip/powerarchiver. Then, i tried with unzip application in Leopard, it works well.

Burn ISO DVD with Toast, but i got following error:

 

Loading Darwin/x86
EBIOS read error: Device timeout
Block 8939856 Sectors 64
EBIOS read error: Device timeout
 Block 8939856 Sectors 64
.....

 

I also tried with another burning software like: nero, magiciso, but still the same situation.

Please help me to fix this problem.

Thank you very much.

Link to comment
Share on other sites
apooo
apooo
Posted
Posted

HI Dune31,

 

I´ve sucessfully installed kalyway but my drives , connected at a marvell sata controller, are not recognized. i have a badaxe2 intel. (Marvell 88SE6145 SATA). In a former installation with uphuck, all drives were recongnized.

 

Do you have any ideas, kexts ....btw, which kext is it?

 

thank you for doing for us all this things!

 

apooo

Link to comment
Share on other sites
defiacnenl
defiacnenl
Posted
Posted
HI Dune31,

 

I´ve sucessfully installed kalyway but my drives , connected at a marvell sata controller, are not recognized. i have a badaxe2 intel. (Marvell 88SE6145 SATA). In a former installation with uphuck, all drives were recongnized.

 

Do you have any ideas, kexts ....btw, which kext is it?

 

thank you for doing for us all this things!

 

apooo

can you tell me why the hell you post the same question over and over ?

this thread is already big enough to wade through info

 

 

@ dune, if you need webspace + domain let me know, i will hook you up

Link to comment
Share on other sites
greythorne
greythorne
Posted
Posted

I understand that only core cpus need vanilla kernel and those pentium 4 3.0GHz w/HT should not select vanilla kernel! But my question is do i need to press F8 during boot and type "vanilla"? does that mean i will be using the vanilla kernel to boot? What happen if i just let the boot to continue does that mean i am using a patched kernel?

 

Thank you.

Link to comment
Share on other sites
mike-ukr
mike-ukr
Posted
Posted

Hi,there computer geniuses,yes you are,i've got some questions is there any possible way to change about this mac like an original apple logo,

to write mac os x leopard and so on.thank you guy's in advance.mac is like harley .... if you understand me.thank's again.

Link to comment
Share on other sites
defiacnenl
defiacnenl
Posted
Posted

there has to be something wrong with Kalyway and P5K combination

 

no matter what install option i try it doesnt matter

vanilla or not etc, it doesnt make a difference, i can install succesfully , then boot into osx, and then the fun is over, i get a grey screen with a black square within in 4 languages telling me i need to reboot.

 

@ Kalaway

i can boot into single user mode , how can i check whats preventing me from booting through osx ?

 

can it be that the device id's are different on the p5k comparing to the ds3 and if so, how can i correct this issue ?

Link to comment
Share on other sites
kiwinux
kiwinux
Posted
Posted

Success intallation on P35-DS3R (rev1). Thanks to Kaly and Dune.

 

I used the version posted by Wenecon on the usenet (thanks to him). I used the last 7Zip software, no error.

 

Installation on yellow port, mode ACHI. Hard Drive and DVD.

Purple port (JMicron) are not used and off in bios.

 

Vanilla_Kernel

Vanilla ACPI fix

NVinject

EFI_mbr

 

Network works out of the box.

Sound needs an additionnal kext, the ALC889A kext.

Link to comment
Share on other sites
spanakorizo
spanakorizo
Posted
Posted
All the kext in the drawer backup are the "original" kext of leo , they are replaced in the extensions system by patched one.

Of course there's a AppleSmbios in your Extension folder. btw, AppleCpuPowermanagement need to be deleted from the system

for avoid cpu heating. It is why you don't see it in Extensions.

 

I don't know what you choose at install but for your P5K premium (witch is very similar to the P5K-E/wifiap used for developement)

the best choices are:

 

Vanilla_Kernel

Vanilla_ACPI_Fix

 

AZALIA_ADI1988B

Realtek_WIFI

EFI(guid or mbr depending from your choice in diskutil)

 

and you bios setting:

 

Cpu Configuration:

 

Max CPUID Value Limit [Disabled]

Execute Disable Bit [Enabled]

 

SatA Configuration:

 

Configure SATA as [AHCI]

 

Onboard Device Configuration:

 

JMicron controller Mode [AHCI]

Power:

 

Suspend Mode [AUto] or [s3 only]

Repost Video on S3 Resume [Disabled]

ACPI 2,0 Support [Enabled]

ACPI APIC Support [Enabled]

 

PCIPnP:

 

Plug And Play Os [Yes]

 

Advanced Chipset Settings:

 

Memory Remap Feature [Enabled]

Don't forget after install to uncheck the disk sleep feature in prefs. This feature is the source of a lot of problems.

 

Leopard is extremely stable on these boards P5K-E, Premium, and Deluxe. So you have one of the best mobo for running leopard.

 

dune thankz for the reply

i think that for some reason i messed with the extensions and all the crashes caused of AppleSmbios not been there

something else ... shouldn't the cpu recognized as intel quad?

cause it says just macpro ,there is not the other table with supported stuff (SSE2,SSE3 etc etc)

i still blv that this release is the best for this mobo ,i just need to fix the crashes ..i'm gonna install again

and why do you say uncheck sleep? sleep works perfect

another thing is that you don't need to set AHCI for the disks ,it works ok even with IDE

Link to comment
Share on other sites
defiacnenl
defiacnenl
Posted
Posted

does anyone know how to contact kalyway directly outside of this forum ?

 

 

@Kalyway

the error im getting is this one

http://docs.info.apple.com/article.html?pa....5/en/8965.html

 

wich refers to a kernel panic.

 

I did a boot in single user mode and mounted the filesystem, i went trough the logs but could not find a hint whats causing the panic.

 

As stated before my hardware should support the release

 

Intel C2D E6300 Conroe (yes its a conroe not a allendale)

Asus p5k (Intel p35/Intel ICH9)

Sapphire Radeon X1950Pro PCI-E

2 x SATA-DVD

1 x IDE - DVD

2 x SATA-HD

20 sata cables

 

i have this panic happen on every install

 

Vanilla kernel ? Yes (incl fix)

Non-Vanilla Kernel ? Yes

 

Including Ati X1950 Drivers ? Yes

Withouth Ati X1950 Dirvers ? Yes

 

With Ati Driver ? yes (this is the other ati driver)

Withouth ati driver ? yes

 

 

With ALC833 ? yes

withouth ? yes

 

and then various combinations.

on all occasions i did not select SSE2

however i did try this once to, and still got the same result

 

i switched so many onboard sata ports im getting dizzy

i cannot lay my finger on whats causing it.

 

Could it be that the hardware id's on the P5k ICH9/P35 differ from the DS3 ? and this is causing it ?

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...