 Leopard (Retail) DVD Perfect Guide 10.5.6 Chameleon 2.0 RC1 April 7,2009

tj_jackson · November 7, 2008

Excuse the English, is that I'm using Google Translate translation for the Portuguese to English, the more you can understand a little, sorry!

All have ACHI as set

I am a Aid, or rather, a boost here to hit my system, well before explaining, my system this way:

I RAID-0 (striped) here, all operating normally,'m just not know that he is getting the boot, not detect it, most within the kalyway which is on another HD, he sees normal, copy files, delete, etc. .. . as does any hd.

I used the Diskutil to see the details:

Disk0

- Disk0s2 (partition) is part of the assembly of RAID

- Disk0s3 (BOOT OSX)

Disk1

- Disk1s2 (partition) is part of the assembly of RAID

- Disk1s3 (BOOT OSX)

Disk2

- Disk2s0 (RAID) here is the partition of the RAID set up on shows that are part of it

Disk3 (this HD is to help set up and make boot and repairs)

- Disk3s0 (EFI) - 200MB, here 's EFI partition that comes installed on the menu that gives you the option of partitions for esolher, unfortunately just not okay with the partition RAID I wanted

- Disk3s2 (BOOT) - 1gb, this is a partition configuration if you need, I created an opportunity to have the most to configure, or EXTRA and it is all right here to set up RAID.

- Disk3s3 (KALYWAY) - 10GB, here is installed Kalyway 10.5.2, I am using him to set all this part of boot, to test the RAID, etc. ....

- Disk3s4 (Leopart Retail) - 9gb, is the image of the DVD LEOPARD RETAIL

Well the probloma is simple, does not detect the partition RAID to boot, so I can not enter the RAID that is installed Leopard RETAIL, it's OK installed on the partition RAID, more after the first reboot failed to access it to boot again and continue installing that would be part of registering your name and login, only by kalyway that normally access the RAID like any other HD, and you can see that the files are usually installed there.

Notes: bios on the HDS 's set as AHCI, the boot in the bios' s configured for HD (disk3), which is the kalyway and partitions and EFI BOOT so I can configure.

there when I give the Boot, I apararece 3 options to choose

1 - BOOT

2 - KALYWAY

3 - Leopard Retail

and the RAID nothing for me to choose, I would like to resolve it, would go a step by step? and the files needed to redirect the boot?

My idea was to set the boot partition to load the RAID, adding ID information identifying raid, I noticed that on information from diskutil, it shows 2 IDs, a more up and one more down, to using low (RAID IDENTIFY)

I tried to do what the guide teaches the first page has no more right, just not view the partition RAID

Can you give me a light show or doing a step by step, it should be simple to do this.

To Kalyway to do with the successes, the more will be fixed RAID that is installed RETAIL

I made a video again, now more setei the hd 1, which is part of the raid as boot, both seting the hd 1 as the hd 2, gives the same error in the boot!

check here I made the whole process, pointing out that I had done and repeat again.

uping...... in rapidshare....

karaakeha1 · November 7, 2008

there when I give the Boot, I apararece 3 options to choose
1 - BOOT

2 - KALYWAY

3 - Leopard Retail

and the RAID nothing for me to choose, I would like to resolve it, would go a step by step? and the files needed to redirect the boot?

First of all read the Guide again .You need to add RAID UUID to the com.apple.Boot.plist

Also need to install Chameleon MANUALLY only as per guide,

Probably You couldn't follow the guide

tj_jackson · November 8, 2008

Thanks for your help guys! The mistake here is mine that I made this UUID in the RAID boot partition and the RAID, then blacked out and came to the RAID first.

could make a raid here, after many attempts worked, and it set the boot partition to show RAID partition and boot the system, with more to a problem in the boot of micro he will not!

I tried 500 times to install the EFI v8 here, but not boot, turn the PC with hd1 (BOOT is the partition) and Boot primary, but not loads, only able to boot from the CD BOOT132 here, without him I can not run Mac , The LEOPARD RETAIL is installed on the partition RAID created by adding the two HDS and the BOOT urged the EFI V8 that 's not working properly.

Follow the tutorial for installation of EFI, more micro not see the boot partition as the first case and as shown in the video below here

Look:

http://rapidshare.com/files/161883320/not_boot.wmv.html

karaakeha1 · November 8, 2008

The mistake here is mine that I made this UUID in the RAID boot partition and the RAID, then blacked out and came to the RAID first.

co

Follow the tutorial for installation of EFI, more micro not see the boot partition as the first case and as shown in the video below here

Look:

http://rapidshare.com/files/161883320/not_boot.wmv.html

Again You are following guide thats why its happening with you.Me & many other tired and it worked

Best thing you try the Chameleon Method Manual Install as per guide .

tj_jackson · November 10, 2008

Again You are following guide thats why its happening with you.Me & many other tired and it worked
Best thing you try the Chameleon Method Manual Install as per guide .

I tried to do by Chameleon a lot of time and not satisfied, then tried by EFI v8 and it worked, for this reason that trying to hit, I hit correctly by EFI v8 even gave the Chameleon, more if I try bothered me turn, be sorry to torment you.

ValKov · November 11, 2008

Hi, all.

I have installed Retail Leo and Combo Update 10.5.5. Everything was fine, but in the end i had this error: Error encountered attempting to verify/repair permissions on disk1s2 Leo: Permissions are not enabled on this disk (-9973). Anyway, new Leo starts loading, but then hangs... Help me, please.

karaakeha1 · November 11, 2008

Hi, all.

I have installed Retail Leo and Combo Update 10.5.5. Everything was fine, but in the end i had this error: Error encountered attempting to verify/repair permissions on disk1s2 Leo: Permissions are not enabled on this disk (-9973). Anyway, new Leo starts loading, but then hangs... Help me, please.

Way to Do.

1.From working Leopard you install Leopard to Another SATA or USB Or Firewire Hard Drive

2. Than from same working Leopard you apply the 10.5.5 update to Hard Drive you just installed Leopard

3.Apply Kext package

4.Chameleon or EFI8 to 10.5.5

Should be working without any problem.

Good luck and try again

ValKov · November 11, 2008

Way to Do.

1.From working Leopard you install Leopard to Another SATA or USB Or Firewire Hard Drive

2. Than from same working Leopard you apply the 10.5.5 update to Hard Drive you just installed Leopard

3.Apply Kext package

4.Chameleon or EFI8 to 10.5.5

Should be working without any problem.

Good luck and try again

Hi, karaakeha1.

Thanks for fast response, but stil no go... First time I installed Chameleon on GUID partition, then Retail Leo and Combo Update, copy/remove/add some kext - reboot - start loading and it hangs... Second time I did as you adwiced - the same. In both installations I was unable to repair permissions...

For information - my rig: GA-EP45-DS3L, E8400, 2 Gb KingMax RAM, GF7300GT, Seagate 80 Gb SATA, Pioneer DVR-215 SATA, Plextor PX-116 IDE.

karaakeha1 · November 12, 2008

Hi, karaakeha1.
Thanks for fast response, but stil no go... First time I installed Chameleon on GUID partition, then Retail Leo and Combo Update, copy/remove/add some kext - reboot - start loading and it hangs... Second time I did as you adwiced - the same. In both installations I was unable to repair permissions...

For information - my rig: GA-EP45-DS3L, E8400, 2 Gb KingMax RAM, GF7300GT, Seagate 80 Gb SATA, Pioneer DVR-215 SATA, Plextor PX-116 IDE.

Destination partition should be GUID

ValKov · November 12, 2008

Destination partition should be GUID

Yes, it's a single GUID partition...

ValKov · November 12, 2008

This is system.log:

bash-3.2#cat /Volumes/Leo/var/log/system.log
Nov 12 06:17:51 localhost com.apple.launchctl.System[2]: fsck_hfs: Volume is journaled.  No checking performed.
Nov 12 06:17:51 localhost com.apple.launchctl.System[2]: fsck_hfs: Use the -f option to force checking.
Nov 12 06:17:54 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Nov 12 06:17:54 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
Nov 12 06:17:54 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
Nov 12 06:18:00 localhost kernel[0]: npvhash=4095
Nov 12 06:17:55 localhost kextd[10]: 402 cached, 0 uncached personalities to catalog
Nov 12 06:18:00 localhost kernel[0]: hi mem tramps at 0xffe00000
Nov 12 06:17:59 localhost fseventsd[26]: event logs in /.fseventsd out of sync with volume.  destroying old logs. (230 10 17029)
Nov 12 06:18:00 localhost kernel[0]: PAE enabled
Nov 12 06:18:00 localhost kernel[0]: 64 bit mode enabled
Nov 12 06:18:00 localhost kernel[0]: Darwin Kernel Version 9.5.0: Wed Sep  3 11:29:43 PDT 2008; root:xnu-1228.7.58~1/RELEASE_I386
Nov 12 06:18:00 localhost kernel[0]: standard timeslicing quantum is 10000 us
Nov 12 06:18:00 localhost kernel[0]: vm_page_bootstrap: 510656 free pages and 13632 wired pages
Nov 12 06:18:01 localhost kernel[0]: mig_table_max_displ = 79
Nov 12 06:18:01 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
Nov 12 06:18:01 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Nov 12 06:18:01 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Nov 12 06:18:01 localhost kernel[0]: AppleACPICPU: ProcessorApicId=2 LocalApicId=2 Disabled
Nov 12 06:18:01 localhost kernel[0]: AppleACPICPU: ProcessorApicId=3 LocalApicId=3 Disabled
Nov 12 06:18:01 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
Nov 12 06:18:01 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
Nov 12 06:18:01 localhost fseventsd[26]: log dir: /.fseventsd getting new uuid: 6CB6472F-55BE-4CC7-A83C-8AE014F6143A
Nov 12 06:18:01 localhost kernel[0]: calling mpo_policy_init for mb
Nov 12 06:18:01 localhost kernel[0]: Seatbelt MACF policy initialized
Nov 12 06:18:01 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
Nov 12 06:18:01 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
Nov 12 06:18:01 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
Nov 12 06:18:01 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Nov 12 06:18:01 localhost kernel[0]: Copyright © 1982, 1986, 1989, 1991, 1993
Nov 12 06:18:01 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Nov 12 06:18:01 localhost kernel[0]: MAC Framework successfully initialized
Nov 12 06:18:01 localhost kernel[0]: using 10485 buffer headers and 4096 cluster IO buffer headers
Nov 12 06:18:01 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Nov 12 06:18:02 localhost kernel[0]: ACPI: System State [s0 S3 S4 S5] (S3)
Nov 12 06:18:02 localhost kernel[0]: --- AppleSMBIOS-28 --
Nov 12 06:18:02 localhost kernel[0]: Default BIOS Version: IM71.88Z.007A.B01.0707251237
Nov 12 06:18:02 localhost kernel[0]: Default Serial Number: CK034KMHK5B
Nov 12 06:18:02 localhost kernel[0]: Default Memory Type (Auto-Detected)
Nov 12 06:18:02 localhost kernel[0]: Default Memory Speed: 800 MHz
Nov 12 06:18:02 localhost kernel[0]: Default Memory Type (Auto-Detected)
Nov 12 06:18:02 localhost kernel[0]: Default Memory Speed: 0 MHz
Nov 12 06:18:02 localhost kernel[0]: Default Memory Type (Auto-Detected)
Nov 12 06:18:02 localhost kernel[0]: Default Memory Speed: 800 MHz
Nov 12 06:18:02 localhost kernel[0]: Default Memory Type (Auto-Detected)
Nov 12 06:18:02 localhost kernel[0]: Default Memory Speed: 0 MHz
Nov 12 06:18:02 localhost kernel[0]: --- AppleSMBIOS-28 --
Nov 12 06:18:02 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
Nov 12 06:18:02: --- last message repeated 1 time ---
Nov 12 06:18:02 localhost kernel[0]: mbinit: done
Nov 12 06:18:02 localhost kernel[0]: Security auditing service present
Nov 12 06:18:02 localhost kernel[0]: BSM auditing present
Nov 12 06:18:02 localhost kernel[0]: From path: "uuid", 
Nov 12 06:18:02 localhost kernel[0]: Waiting for boot volume with UUID 9BEE41E2-CB2E-3CC9-AD48-400E2FF29DC5
Nov 12 06:18:02 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Nov 12 06:18:02 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IDE1@1F,2/AppleAHCI/SECD@1/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/ST380013AS Media/IOGUIDPartitionScheme/Untitled@2
Nov 12 06:18:02 localhost kernel[0]: BSD root: disk1s2, major 14, minor 6
Nov 12 06:18:02 localhost kernel[0]: jnl: unknown-dev: replay_journal: from: 3784704 to: 4740608 (joffset 0x254000)
Nov 12 06:18:02 localhost kernel[0]: jnl: unknown-dev: journal replay done.
Nov 12 06:18:02 localhost kernel[0]: HFS: Removed 3 orphaned unlinked files or directories 
Nov 12 06:18:02 localhost kernel[0]: Jettisoning kernel linker.
Nov 12 06:18:02 localhost kernel[0]: Resetting IOCatalogue.
Nov 12 06:18:02 localhost kernel[0]: display: family specific matching fails
Nov 12 06:18:02 localhost kernel[0]: Matching service count = 1
Nov 12 06:18:02 localhost kernel[0]: Matching service count = 2
Nov 12 06:18:04: --- last message repeated 4 times ---
Nov 12 06:18:04 localhost socketfilterfw[37]: _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
Nov 12 06:18:05 localhost DirectoryService[31]: Launched version 5.5 (v514.23)
Nov 12 06:18:05 localhost DirectoryService[31]: Improper shutdown detected
Nov 12 06:18:07 localhost rpc.statd[17]: statd.notify - no notifications needed
Nov 12 06:18:09 localhost DirectoryService[31]: WARNING - dsTouch: file was asked to be opened </var/run/.DSRunningSP1>: (File exists)
Nov 12 06:18:11 localhost kernel[0]: AppleRTL8169Ethernet: Ethernet address 00:1f:d0:88:b7:79
Nov 12 06:18:11 localhost bootlog[35]: BOOT_TIME: 1226499469 0
Nov 12 06:18:12 localhost kernel[0]: NVDANV40HAL loaded and registered.
Nov 12 06:18:12 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[22]: Login Window Application Started
Nov 12 06:18:12 localhost kernel[0]: display: family specific matching fails
Nov 12 06:18:12: --- last message repeated 1 time ---
Nov 12 06:18:12 localhost kernel[0]: dsmos: Initializing...
Nov 12 06:18:12 localhost kernel[0]: dsmos: Hook and decryption contexts set!
Nov 12 06:18:12 localhost kernel[0]: dsmos: Starting...
Nov 12 06:18:12 localhost configd[33]: _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
Nov 12 06:18:12 localhost DirectoryService[31]: _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
Nov 12 06:18:12 localhost diskarbitrationd[30]: _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
Nov 12 06:18:12 localhost securityd[18]: _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
Nov 12 06:18:13 localhost mDNSResponder mDNSResponder-176.2 (Aug 15 2008 14:58:54)[21]: starting
Nov 12 06:18:12 localhost mds[20]: _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
Nov 12 06:18:13 localhost kernel[0]: jnl: disk0s1: replay_journal: from: 1998848 to: 2366976 (joffset 0xf3000)
Nov 12 06:18:13 localhost fseventsd[26]: log dir: /Volumes/Untitled/.fseventsd getting new uuid: B1BE48E4-7E68-4D50-981E-2E303098152B
Nov 12 06:18:12 localhost loginwindow[22]: _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
Nov 12 06:18:13 localhost kernel[0]: jnl: disk0s1: journal replay done.
Nov 12 06:18:13 localhost /System/Library/CoreServices/coreservicesd[39]: /dev/fsevents filter failed! (Bad file descriptor)
Nov 12 06:18:13 localhost backupd-helper[55]: _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
Nov 12 06:18:13 localhost mds[20]: (/Volumes/Untitled/.Spotlight-V100/Store-V1/Stores/600BA6A6-6E5A-4BDA-AE22-E9C91A3B7865)(Error) IndexCI in ContentIndexOpenBulk:Unclean shutdown of /Volumes/Untitled/.Spotlight-V100/Store-V1/Stores/600BA6A6-6E5A-4BDA-AE22-E9C91A3B7865/live.2.; needs recovery
Nov 12 06:18:13 localhost ifcstart[24]: _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
Nov 12 06:18:14 localhost CoreRAIDServer[32]: _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
Nov 12 06:18:14 localhost fseventsd[26]: log dir: /Volumes/Untitled 1/.fseventsd getting new uuid: CA9E670C-B705-4944-B055-23150D56C640
Nov 12 06:18:14 localhost WindowServer[79]: _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
Nov 12 06:18:14 localhost /usr/sbin/ocspd[84]: starting
Nov 12 06:18:14 localhost mDNSResponder[21]: _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
Nov 12 06:18:14 localhost mDNSResponder[21]: WARNING: sandbox_init error Could not set Mach lookup policy for service com.apple.bsd.dirhelper err=1100Could not set Mach lookup policy for service com.apple.distributed_notifications.2 err=1100Could not set Mach lookup policy for service com.apple.ocspd err=1100Could not set Mach lookup policy for service com.apple.mDNSResponderHelper err=1100Could not set Mach lookup policy for service com.apple.SecurityServer err=1100Could not set Mach lookup policy for service com.apple.SystemConfiguration.configd er
Nov 12 06:18:14 localhost ATSServer[86]: _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
Nov 12 06:18:15 localhost mdworker[83]: _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
Nov 12 06:18:15 localhost com.apple.coreservicesd[39]: 2008-11-12 06:18:15.010 lsregister[85:807] _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
Nov 12 06:18:15 localhost lsregister[85]: _CFGetHostUUIDString: unable to determine UUID for host. Error: 35
Nov 12 06:18:15 localhost mds[20]: (/Volumes/Untitled 1/.Spotlight-V100/Store-V1/Stores/D62CD69A-9725-4B71-9FE8-BAB85963159F)(Error) IndexCI in ContentIndexOpenBulk:Unclean shutdown of /Volumes/Untitled 1/.Spotlight-V100/Store-V1/Stores/D62CD69A-9725-4B71-9FE8-BAB85963159F/live.2.; needs recovery
Nov 12 06:18:15 localhost configd[33]: InterfaceNamer: no network interfaces, could not update platform UUID
bash-3.2#

I houpe, it helps to solve the problem... It seems like wrong driver for net installed, should be 8168, not 8169...

karaakeha1 · November 12, 2008

I am not sure something wrong with your Hard Drive Etc

William Parker · November 13, 2008

Hi Kraakeeha1

Thanks for all the hard work. I am using Chameleon EFI and 10.5.5 and SMBIOS from your postpatch kexts. How do I change the Model Name & Model Identifier? It is just Mac and .# respectively. Please help.

Thank you

Kind regards

Next time I will post requests in the forum as you asked instead of PM. Really appreciate your work. Meantime I of course found that modding by DMICFG the bios on board helped clear our all problems. I needed to hex edit inside of the AppleSMBIOS.kext file the item AppleSMBIOS. Everything okay now.

Thanks all you good people.http://forum.insanelymac.com/style_emoticons/default/smile.gif

WP

karaakeha1 · November 13, 2008

Hi Kraakeeha1
Thanks for all the hard work. I am using Chameleon EFI and 10.5.5 and SMBIOS from your postpatch kexts. How do I change the Model Name & Model Identifier? It is just Mac and .# respectively. Please help.

Thank you

Kind regards

Next time I will post requests in the forum as you asked instead of PM. Really appreciate your work. Meantime I of course found that modding by DMICFG the bios on board helped clear our all problems. I needed to hex edit inside of the AppleSMBIOS.kext file the item AppleSMBIOS. Everything okay now.

Thanks all you good people.http://forum.insanelymac.com/style_emoticons/default/smile.gif

WP

This is already answered, Probably within last 2 months in this tread, Refer it

JaE-V · November 13, 2008

*Cloning*

JaE-V · November 14, 2008

Someone wanna cleanup the process to manually install chameleon on the raided drives? I'm just stuck here, not understanding the instructions at all. I've downloaded the needed files.

DNARNA · November 14, 2008

Someone wanna cleanup the process to manually install chameleon on the raided drives? I'm just stuck here, not understanding the instructions at all. I've downloaded the needed files.

Me and many others followed the guide quite easily. Of-course Raid instillation is for little advance user, If you don't understand UUID and how to add or Don' understand where to put chameleon files before using terminal than its little I think Too much for you to follow.

If you have any specific question post in the forum.

JaE-V · November 14, 2008

Me and many others followed the guide quite easily. Of-course Raid instillation is for little advance user, If you don't understand UUID and how to add or Don' understand where to put chameleon files before using terminal than its little I think Too much for you to follow.
If you have any specific question post in the forum.

Blah blah..

Once i figure it out i'll post a guide everyone can follow for this portion.

JaE-V · November 14, 2008

*Edit*

http://aquamac.proboards106.com/index.cgi?...&thread=613

Much easier guide to follow for those getting caught up on installing the chameleon-raid portion like i was. I'm now up and running.

DNARNA · November 15, 2008

*Edit*

http://aquamac.proboards106.com/index.cgi?...&thread=613

Much easier guide to follow for those getting caught up on installing the chameleon-raid portion like i was. I'm now up and running.

SAME as This guide

Only difference placed chameleon files at desktop instead in the User Root folder

I was right you probably couldn't figure out where to place files and run Terminal.

HAVE FUN

JaE-V · November 15, 2008

SAME as This guide
Only difference placed chameleon files at desktop instead in the User Root folder

I was right you probably couldn't figure out where to place files and run Terminal.

HAVE FUN

All that matters is that i figured it out, wow at you tooting your own horn lol...Your immaturity reeks and i'm 100% sure that if this guide was a simple as the one in the link i posted this thread would be filled with more "thanks and praise" then irritating questions....Later

DNARNA · November 15, 2008

if this guide was a simple as the one in the link i posted this thread would be filled with more "thanks and praise" then irritating questions....Later

I think every little or big guide complement the whole Insanely mac Idea.

I am very thankful and up for all persons who took time and posted here rather demanding and complaining.

enjoy

JaE-V · November 15, 2008

I think every little or big guide complement the whole Insanely mac Idea.
I am very thankful and up for all persons who took time and posted here rather demanding and complaining.

enjoy

as we all are....i'm a simple person i like things simplified neither demanding or complaining at all. your just rude as hell. lol@ you saying "too much for you to follow" and "Of-course Raid instillation is for little advance user" like your king hackintoshness lmaooo seriously did you go back and read what you wrote? lol

Barcode · November 15, 2008

Since my last visit here my system has worked perfectly. I've made a disk image of my Leopard partition and tested restoring the system with it, then reinstalled Chameleon. Worked 100% OK

The only question I have now is about timed sleep (via the Energy Saver options in System Preferences): the system will not sleep after the set time if the system is inactive; it will sleep at a set time of day, e.g. 11:00 PM. Has anyone using Karaakeha1's guide got timed inactivity sleeping to work? Could Time Macine be interfering with that?

karaakeha1 · November 15, 2008

Since my last visit here my system has worked perfectly. I've made a disk image of my Leopard partition and tested restoring the system with it, then reinstalled Chameleon. Worked 100% OK

The only question I have now is about timed sleep (via the Energy Saver options in System Preferences): the system will not sleep after the set time if the system is inactive; it will sleep at a set time of day, e.g. 11:00 PM. Has anyone using Karaakeha1's guide got timed inactivity sleeping to work? Could Time Macine be interfering with that?

Glad Cloning works for you , I do the same for restoration or Cloning

Yes timed Sleep is working , After I uninstalled software to read Write NTFS( i.e; Paragon Or MacFuse).

This issue even affects the MacBook Pro Or others apple Macs I read some where.

I updated about this on First Post ( Sep 18 Update)

 Leopard (Retail) DVD Perfect Guide 10.5.6 Chameleon 2.0 RC1 April 7,2009

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites