MarcP Posted July 16, 2008 Share Posted July 16, 2008 sleep works for you karaa? if so with what kext. I'm on vanilla kernel I have the same mobo as you. See my sig, sleep works fine (wake-up by power button). Not sure which kext it is, but I'd say the general recommendation is: the fewer replaced kexts, the better. If you install vanilla 10.5.4 and karaakeha1's kexts you should have a stable hack. Link to comment Share on other sites More sharing options...
karaakeha1 Posted July 16, 2008 Author Share Posted July 16, 2008 Sadly, that didn't work. I was able to get the exact EFI string from that beta pkg on this site (and I tried the EFI string from the 2400 out of EFI Studio). I added that, copied the vanilla ATI kexts back, removed natit, and repaired permissions. I got black and white vertical bars on screen 1 and black and white checkboard on screen 2. I get correct visuals when I move the natit and modified kexts back. My device id is in the vanilla kext. Is there something else that is in the those for it to work correctly? Looks like your Video Card may be the cause or motherboard ? For most of the Gigabyte Sleep works and wake up is by power button. Link to comment Share on other sites More sharing options...
TorqueX86 Posted July 19, 2008 Share Posted July 19, 2008 On some Gigabyte board what hinders the sleep function is either a VERY pushed up FSB and voltage or the overclock via bios of the gfx card... Try to disable the whole set of overclocking options and try again... Link to comment Share on other sites More sharing options...
karaakeha1 Posted July 19, 2008 Author Share Posted July 19, 2008 Also consider BIOS F7 on (P35-DS4) for this is the best So far if anything than this system fails to wake up from sleep (S3).than it goes into endless restart cycles. . Link to comment Share on other sites More sharing options...
Menacie Posted July 21, 2008 Share Posted July 21, 2008 Anyone know if this works on a P5B with a Q6600? Thanks! Link to comment Share on other sites More sharing options...
karaakeha1 Posted July 21, 2008 Author Share Posted July 21, 2008 Anyone know if this works on a P5B with a Q6600? Thanks! Should work ,just use Specific Audio kext for your board Link to comment Share on other sites More sharing options...
karaakeha1 Posted July 21, 2008 Author Share Posted July 21, 2008 Since system now is running close to perfect. for fun here is my modified system profile Link to comment Share on other sites More sharing options...
DrDeelay Posted July 21, 2008 Share Posted July 21, 2008 thx very much for your great guide. I installed the 3-disk-raid Version on a Asus P5K, and it really works great and is amazingly stable and fast. :censored2: take care, DrDeelay! Link to comment Share on other sites More sharing options...
Jumbie Posted July 22, 2008 Share Posted July 22, 2008 Leopard retail instillation Updated 19 June for Chameleon EFI & EFI v8 simplified guide( See Below After RAID Guide) 11 July, For Restart fix -Open AppleACPIPlatform Binary in hex Editor & replace E8 A0 FF FF FF with B0 FE E6 64 F4 ( thanks to CharlesB ) attached below latest AppleACPIPlatform.kext 25 June :Latest Audio Apple HDA kext Show up in profile with HDAenabler.kext UPDATE 5 July. Still the best is OLD APPLEHDA.kext with String , This new one produces lot of unwanted hisses when draging n droping Hi karaakeha1, thanks for your guide. I'm in the process of trying it out now on my DS3R board. One quick question though - are all the latest kexts already in the Installer directory or do we need to download them from this post and replace them ourselves? Thanks. PS I'm still waiting for my second HD to arrive in the mail so I'm installing this using a Sandisk Extreme III SDHC card and a USB reader as my installer. lol, it's working but slow as all hell. Link to comment Share on other sites More sharing options...
one9092002 Posted July 22, 2008 Share Posted July 22, 2008 Anyone know if this works on a P5B with a Q6600? Thanks! noob here will leopard retail work with these specs p5wdh deluxw with q6600 2gb memory xfx 8600 gt 1tb seagate hard drive Link to comment Share on other sites More sharing options...
jrangles Posted July 22, 2008 Share Posted July 22, 2008 karaakeha1 " system now is running close to perfect. for fun here is my modified system profile" How Modified your system profile? Sorry my english Link to comment Share on other sites More sharing options...
karaakeha1 Posted July 22, 2008 Author Share Posted July 22, 2008 noob herewill leopard retail work with these specs p5wdh deluxw with q6600 2gb memory xfx 8600 gt 1tb seagate hard drive yes would work Link to comment Share on other sites More sharing options...
BNO Posted July 22, 2008 Share Posted July 22, 2008 Thanks karaakeha1 for this great guide. I just setup a Leopard Server using Chameleon EFI and your Install Package. Hardware: CPU: Intel Celeron Dual-Core E1200 Mainboard: ASUS P5KPL (Intel G31/ICH7) RAM: 2GB DDR2-800 MDT The only extension I made to the Install Package was the Time Machine fix. Now my machine is running OS X 10.5.4 Server and everything works fine. Link to comment Share on other sites More sharing options...
karaakeha1 Posted July 22, 2008 Author Share Posted July 22, 2008 Hi karaakeha1, thanks for your guide. I'm in the process of trying it out now on my DS3R board. One quick question though - are all the latest kexts already in the Installer directory or do we need to download them from this post and replace them ourselves? Thanks. PS I'm still waiting for my second HD to arrive in the mail so I'm installing this using a Sandisk Extreme III SDHC card and a USB reader as my installer. lol, it's working but slow as all hell. here is attached latest package Latest_Kext_package.zip Link to comment Share on other sites More sharing options...
Jumbie Posted July 22, 2008 Share Posted July 22, 2008 Thanks karaakeha1. Link to comment Share on other sites More sharing options...
karaakeha1 Posted July 22, 2008 Author Share Posted July 22, 2008 thx very much for your great guide. I installed the 3-disk-raid Version on a Asus P5K, and it really works great and is amazingly stable and fast. take care, DrDeelay! Glad worked for you karaakeha1 " system now is running close to perfect. for fun here is my modified system profile" How Modified your system profile? Sorry my english If your are using AppleSMBIOS-28 included in package and latest AppleACPIplatform.kext modify file Localizable.strings at location Do the following changes to localizable.strings To make the changes Drag copy of SPPlatformReporter.spreporter on desktop , Aftermodification put back(over write original) logout and you can see the changes in the profiler Link to comment Share on other sites More sharing options...
jrangles Posted July 22, 2008 Share Posted July 22, 2008 Thanks karaakeha1 Link to comment Share on other sites More sharing options...
one9092002 Posted July 22, 2008 Share Posted July 22, 2008 can i use your guide with these specs p5w dh deluxe q6600 2 gb mem xfx 8600 gt ..what settting should i have in the bios ?...i have try to install vanilla but no luck....i can install nektas kernel but not vanillia what im i doing wrong Link to comment Share on other sites More sharing options...
karaakeha1 Posted July 23, 2008 Author Share Posted July 23, 2008 can i use your guide with these specs p5w dh deluxe q6600 2 gb mem xfx 8600 gt ..what settting should i have in the bios ?...i have try to install vanilla but no luck....i can install nektas kernel but not vanillia what im i doing wrong Yes , Just need to use required kext for your motherboard. in Bios SATA should be set to AHCI mode Link to comment Share on other sites More sharing options...
karaakeha1 Posted July 24, 2008 Author Share Posted July 24, 2008 For P35 DS Board new BIOS F13 works well Sleep is Working with this, Wake up is fine. , And latency issue is fixed too For Shut ,restart patch as usual. Link to comment Share on other sites More sharing options...
eclau Posted July 24, 2008 Share Posted July 24, 2008 Interestingly, with F13, only 3 cores is detected. Maybe that's why wake up from sleep does not work for me. Any idea, karaakeha1? EDIT: OK, problem solved... by loading optimized BIOS settings once, then reconfigure to the desired settings. All 4 cores are detected now, and sleep, restart, shutdown all work with F13. Link to comment Share on other sites More sharing options...
susu2k Posted July 24, 2008 Share Posted July 24, 2008 sorry maby im just stupid. but, do you know if this works for me? i have asus p5k pro, 3.16ghz intel core duo cpu. will this work? i tried updating from 10.5.2 to 10.5.4, but it crashed at 33%. how can i install it, so i don't neet to patch anymore. I took the vanilla kernel, was this am misstake? I just wanna get updates without patching, is this possible with this realease? How about support for the radeon x4870? regards Link to comment Share on other sites More sharing options...
Fresh1 Posted July 25, 2008 Share Posted July 25, 2008 All right wondering if someone can send me in the right direction. Here is what I have currently done and I am not sure if I am going about the process right. 1. Loaded Osx to external usb drive. Using the new 132 loader. 2. Installed two Sata drives on my P5w DH (Not the EZ-RAID. 3. Booted osx retail using osx bootloader. 4. Opened Utility and set striped raids on the two internal Sata Drives. 5. Booted to OSX on external usb drive. What do i need to do next to the Raid drive in order to boot to it using the new Kaly Cham loader? Or do i not need that particular loader? Thanks Link to comment Share on other sites More sharing options...
tomazzzi Posted July 25, 2008 Share Posted July 25, 2008 Thanks a lot for this guide That s incredible, i managed to install retail leopard on my gigabyte GA965p-dq6 then updated to 10.5.4 it with software update. Everything works like a charm ! Thanks again ! Chameleon is the best things i v seen in osx86 for a long time Link to comment Share on other sites More sharing options...
karaakeha1 Posted July 25, 2008 Author Share Posted July 25, 2008 All right wondering if someone can send me in the right direction. Here is what I have currently done and I am not sure if I am going about the process right. 1. Loaded Osx to external usb drive. Using the new 132 loader. 2. Installed two Sata drives on my P5w DH (Not the EZ-RAID. 3. Booted osx retail using osx bootloader. 4. Opened Utility and set striped raids on the two internal Sata Drives. 5. Booted to OSX on external usb drive. What do i need to do next to the Raid drive in order to boot to it using the new Kaly Cham loader? Or do i not need that particular loader? Thanks 1.After installing OS on the Striped RAID Follow guide in the first post. 2.FIRST Add the RAID ID to com.boot.apple.plist than ,Chameleon EFI (make sure this is done after ) Link to comment Share on other sites More sharing options...
Recommended Posts