Coda Posted March 27, 2008 Share Posted March 27, 2008 Thanks for your reply, Coda.Maybe you can check my new thread and maybe even tell that I would be better with the original Leopard installation? it's here:http://forum.insanelymac.com/index.php?showtopic=95982 Thanks again! I would do a retail install. The only thing is - if you don't have another intel mac/hac then you need another hard disk to install kaly or whatever on first. Once you have a working kaly (even in safe mode, it doesnt matter about the gfx drivers etc) you can do the retail DVD install method onto the right hard disk. Link to comment Share on other sites More sharing options...
yonyz Posted March 27, 2008 Share Posted March 27, 2008 I need another PC with Leopard installed on it, in order to install the retail Leopard on my PC? Link to comment Share on other sites More sharing options...
Cathul Posted March 27, 2008 Share Posted March 27, 2008 I need another PC with Leopard installed on it, in order to install the retail Leopard on my PC? Yes Link to comment Share on other sites More sharing options...
MR.Winmac Posted March 27, 2008 Share Posted March 27, 2008 if you look at the pre-patch file for the efi you will notice near the top a line something like -a /VOLUME/macintosh volume is the key word i dont know about your systems but i corrected the word volume to volumes as is t was on my system then efi went great and the Terminal install went fine if you read the very first post in this thread that is indeed the best and easiest way to do it i did not get any of the problems i see here i hope i saved some people some trouble coz that was my problem in the beginning but i had only been in this forum 3 or 4 days and found this guide and had leopard running retail a cpl hrs later Link to comment Share on other sites More sharing options...
Coda Posted March 27, 2008 Share Posted March 27, 2008 if you look at the pre-patch file... You got a '.' key on that keyboard? Link to comment Share on other sites More sharing options...
DNARNA Posted March 28, 2008 Share Posted March 28, 2008 Anybody tried New Q9450 with P 35 ds4 board ? Link to comment Share on other sites More sharing options...
jccar Posted March 28, 2008 Share Posted March 28, 2008 I would do a retail install. The only thing is - if you don't have another intel mac/hac then you need another hard disk to install kaly or whatever on first. Once you have a working kaly (even in safe mode, it doesnt matter about the gfx drivers etc) you can do the retail DVD install method onto the right hard disk. so can the same procedure be done with an imac, the disk hooked via USB and then install the disk on a pc (perhaps taking it out of the case, providing the disk is a SATA...)? Link to comment Share on other sites More sharing options...
Coda Posted March 29, 2008 Share Posted March 29, 2008 so can the same procedure be done with an imac, the disk hooked via USB and then install the disk on a pc (perhaps taking it out of the case, providing the disk is a SATA...)? Yes. Just make sure the USB disk is 'owners enabled' before you start the install. Link to comment Share on other sites More sharing options...
karaakeha1 Posted March 30, 2008 Author Share Posted March 30, 2008 Anybody tried New Q9450 with P 35 ds4 board ? I dont see any reason why it wont work Link to comment Share on other sites More sharing options...
yonyz Posted March 30, 2008 Share Posted March 30, 2008 Yes So if I will buy a new cheap Hard Disk drive and put it in the same PC where the HD I would like to install the Retail Leopard DVD on is, it will work? Or I'm gonna need a whole other PC with Leopard installed to do that? Link to comment Share on other sites More sharing options...
FrankT Posted March 30, 2008 Share Posted March 30, 2008 I've read through this thread, and made one attempt. When I try to boot into my prepared disk, I get the OSX kernel panic each time (see the gray apple screen with spinning progress wheel, then dark gray power button box telling me I must restart). Admittedly, my attempt seems different than others, so it's probably my setup: Dell Latitude D830 laptop Using an 8 gig USB flash drive, rather than regular hard drive. I found another thread talking about the D830, and pulled some integrated Intel video kext files that it talked about. Anyone have any additional insight to getting it running from an external USB drive on a D830? Anyone have a pointer as to what to troubleshoot for the kernel panic I'm seeing. Thanks in advance for any ideas. I don't have another machine to mess with right now, so if the D830 is a deal-breaker, I'll have to wait until I have a different machine to play with. Link to comment Share on other sites More sharing options...
jccar Posted March 30, 2008 Share Posted March 30, 2008 is there any kernel that has S3 sleep & speedstep working at the same time? Link to comment Share on other sites More sharing options...
thefinalprophecy Posted March 30, 2008 Share Posted March 30, 2008 No there is not, and supposedly it is not possible. I'm not really even sure what the big deal about SpeedStep is... I guess it's fine for notebooks if it helps them save power but does it really matter for the rest of us? Link to comment Share on other sites More sharing options...
tigerzzz Posted March 31, 2008 Share Posted March 31, 2008 Realtek has a new driver for the onboard RTL8111B http://www.realtek.com.tw/downloads/downlo...GetDown=false#7 Link to comment Share on other sites More sharing options...
DNARNA Posted April 3, 2008 Share Posted April 3, 2008 Realtek has a new driver for the onboard RTL8111B http://www.realtek.com.tw/downloads/downlo...GetDown=false#7 Have to u tried this Link to comment Share on other sites More sharing options...
LS8 Posted April 3, 2008 Share Posted April 3, 2008 Yes I have tried it. I cannot see any difference from the previous version. Old bugs persist. Link to comment Share on other sites More sharing options...
karaakeha1 Posted April 15, 2008 Author Share Posted April 15, 2008 Is anybody using 8800 or 8600 card with this board P35 DS4. Which GFX string or drivers they are using. I am upgrading my Graphic card any suggestions ? thanks Link to comment Share on other sites More sharing options...
LTL Posted April 15, 2008 Share Posted April 15, 2008 Is anybody using 8800 or 8600 card with this board P35 DS4. Which GFX string or drivers they are using. I am upgrading my Graphic card any suggestions ? thanks See the last few parts of my Install Thread.. some people are flashing 8800's with Apple BIOS I also have strings for 8800 if you need... PM me I'll be helpful as you always were with me Link to comment Share on other sites More sharing options...
karaakeha1 Posted April 15, 2008 Author Share Posted April 15, 2008 See the last few parts of my Install Thread.. some people are flashing 8800's with Apple BIOS I also have strings for 8800 if you need... PM me I'll be helpful as you always were with me Thanks , I saw you sign with ATI 3870 some people say its better than 8800 ?, I like the brilliant Idea of Apple Bios, After flashing still have to use GFX String , How is your Sleep with ATI 3870 Link to comment Share on other sites More sharing options...
karaakeha1 Posted April 16, 2008 Author Share Posted April 16, 2008 Any one using fingerprint Reader with Leopard Link to comment Share on other sites More sharing options...
Coda Posted April 16, 2008 Share Posted April 16, 2008 You have EFI strings for 8800 GTS (the G80 version, not G92)? I'm getting one of these cards, it's currently in a G5 Powermac... Link to comment Share on other sites More sharing options...
karaakeha1 Posted April 16, 2008 Author Share Posted April 16, 2008 You have EFI strings for 8800 GTS (the G80 version, not G92)? I'm getting one of these cards, it's currently in a G5 Powermac... I dont have EFI Sting is G92 version works Link to comment Share on other sites More sharing options...
Coda Posted April 16, 2008 Share Posted April 16, 2008 I dont have EFI Sting is G92 version works Huh? Link to comment Share on other sites More sharing options...
FavleX Posted April 16, 2008 Share Posted April 16, 2008 Las day I change my power supply.Then I remount everything, and i Launched the supdate. Everything is going well apart sleep..why? Even if I use different kernel (netkas family..) my sleep is gone??Anyone point me in the right direction?? Link to comment Share on other sites More sharing options...
karaakeha1 Posted April 16, 2008 Author Share Posted April 16, 2008 Las day I change my power supply.Then I remount everything, and i Launched the supdate.Everything is going well apart sleep..why? Even if I use different kernel (netkas family..) my sleep is gone??Anyone point me in the right direction?? This happened to me once , I took out the motherboard battery for 3-4 mins .After everthing worked fine for me Link to comment Share on other sites More sharing options...
Recommended Posts