Jump to content

Need testers for one of the components of next v2.00 Patcher

Taruga

By Taruga,
in AppleHDA

 Share
314 posts in this topic

Recommended Posts

New2OSx
New2OSx
Posted
Posted

here are my results with HDAudio3.kext

 

HDAudio[0x3c7cc00]::CodecDetection-started(0x3960480) by Taruga

/HDAudio::D27:F0 Irq: 22 Vid: 8086 Pid: 27d8

:HDAudio::Cad Address: 0

HDAudio::Vid/Pid : 0x10ec0861 0x00000000 0x00000000

HDAudio::Subsystem : 0x11791205

HDAudio::Revision : 0x00100300

HDAudio[0x3c7cc00]::CodecDetection-ended(0x1)

Link to comment
Share on other sites
NeSuKuN
NeSuKuN
Posted
Posted

[specs in signature]

localhost:/ root# kextload -v HDAudio.kext
HDAudio[0x4e84200]::CodecDetection-started(0x4ad7000) by Taruga
HDAudio::D27:F0 Irq 16 Vid: 8086 Pid: 27d8
HDAudio::Cad Address: 0
HDAudio::Vid/Pid: 0x10ec0888 0x000000 0x000000
HDAudio::Subsystem: 0x18491e01
HDAudio::Revision: 0x00100001
HDAudio[0x4e84200]::CodecDetection-ended(0x1)

Link to comment
Share on other sites
seskanda
seskanda
Posted
Posted

For some strange reason, now whenever i load it [0x2a3f400] came back in the first and last lines... :) Anyhow, i wanted to try the HDAudio2.kext ,but it disappeared...so i want ahead and tried HDAudio3.kext. Now, all i get is:

 

kextload: /HDAudio.kext loaded succesfully

 

 

And that's it! If i try again it says this:

 

kextload: extension /HDAudio.kext is already loaded

 

Another attempt brings back the first message. I'm NO programmer, but maybe Address 1,2 has to do with the difference between Desktops and Laptops, right? I really hope all this gets sorted out by Christmas.....

Link to comment
Share on other sites
OcciJano
OcciJano
Posted
Posted

Intel D945GTPLR SigmaTel STAC9223 page info from Intel http://www.intel.com/design/motherbd/tp/tp_available.htm

HDAudio[0x3e88e00]::CodecDetection-started(0x3bec980) by Taruga

HDAudio::D27:F0 Irq: 22 Vid: 8086 Pid: 27d8

HDAudio::Cad Address: 0

HDAudio::Vid/Pid : 0x00000000

HDAudio::Subsystem : 0x00000000

HDAudio::Revision : 0x00000000

HDAudio[0x3e88e00]::CodecDetection-ended(0x1)

 

Linux Codec from http://psykopat.free.fr/apple/AppleHDA/

 

Codec: SigmaTel STAC9220D/9223D A2

Address: 2

Vendor Id: 0x83847681

Subsystem Id: 0x80860303

Revision Id: 0x103201

Greetings from México City

Link to comment
Share on other sites
wmarsh
wmarsh
Posted
Posted
Hi guys, I need some testers for a component of my next patcher. (This test is very important for the release of the new patcher)

 

Stac 9227 on Dell E520 (linux codec posted on other thread)

http://forum.insanelymac.com/index.php?s=&...st&p=532235

 

The Linux dump starts as follows:

Codec: SigmaTel STAC9227

Address: 2

Vendor Id: 0x83847618

Subsystem Id: 0x102801dd

Revision Id: 0x100201

 

Therefore, I believe its one of those Taruga is having problems with.

 

On mine it just says "kext loaded successfully" -- No output as at top or as posted on other threads.

This is also true if I move it to /System/Library/Extensions, unload Tiger kexts (which I am currently using for sound), then kextload ./HDAudio.kext

 

kextload -v gives:

kextload: extension /HDAudio.kext appears to be loadable

kextload: loading extension /HDAudio.kext

kextload: /HDAudio.kext loaded successfully

kextload: sending personalities to kernel:

kextload: from extension /System/Library/Extensions/IOPCIFamily.kext:

kextload: IOPCI2PCIBridge-Name

kextload: IOPCI2PCIBridge-i386

kextload: IOPCI2PCIBridge-PCI

kextload: from extension //DAudio.kext:

kextload: HDAudio

kextload: sending 4 personalities to the kernel

kextload: matching started for /HDAudio.kext

 

In gui, kext loads, but no output devices are found.

 

We do all appreciate your hard work Taruga.

Link to comment
Share on other sites
Taruga
Taruga
Posted
  • Author
Posted
For some strange reason, now whenever i load it [0x2a3f400] came back in the first and last lines... :blink: Anyhow, i wanted to try the HDAudio2.kext ,but it disappeared...so i want ahead and tried HDAudio3.kext. Now, all i get is:

 

kextload: /HDAudio.kext loaded succesfully

And that's it! If i try again it says this:

 

kextload: extension /HDAudio.kext is already loaded

 

Another attempt brings back the first message. I'm NO programmer, but maybe Address 1,2 has to do with the difference between Desktops and Laptops, right? I really hope all this gets sorted out by Christmas.....

 

Taruga: Well, the HD Audio Bus can support multiple devices, Audio, Modem, HDMI, etc

At the moment, it seems I can only communicate with the audio codec if it´s in address 0.

I have to get access to a pc with an audio codec in a different address to improve the code or else I´ll have to make a manual option for codecs at other addresses as I need to know where they are to program the codec right.

 

Why is this important ? For ex. for codecs that show input and output devices but don´t work at all, they need some code to modify codec parameters so they can work properly. And this is only one example.

Link to comment
Share on other sites
SticMAC™
SticMAC™
Posted
Posted

MAYBE????????

 

I ran Ubuntu 7.10 64bit, and where i told you a lot of 2's came up!? (hotplug etc.) there are a lot of 4's coming up!

Could it be that the search has to go as deep as 4?

 

 

SticMAN

 

 

Taruga: Well, the HD Audio Bus can support multiple devices, Audio, Modem, HDMI, etc

At the moment, it seems I can only communicate with the audio codec if it´s in address 0.

I have to get access to a pc with an audio codec in a different address to improve the code or else I´ll have to make a manual option for codecs at other addresses as I need to know where they are to program the codec right.

 

Why is this important ? For ex. for codecs that show input and output devices but don´t work at all, they need some code to modify codec parameters so they can work properly. And this is only one example.

Link to comment
Share on other sites
ToTzliar
ToTzliar
Posted
Posted (edited)

Compaq v3148TU notebook:conexant hdaudio 14f1 5047

 

HDAudio[0x3ede00]::CodecDetection-started(0x2cec000) by Taruga

/HDAudio::D27:F0 Irq: 22 Vid: 8086 Pid: 27d8

:HDAudio::Cad Address: 0

HDAudio::Vid/Pid : 0x14f15047 0x00000000 0x00000000

HDAudio::Subsystem : 0x103c30b2

HDAudio::Revision : 0x00100000

HDAudio[0x30ede00]::CodecDetection-ended(0x1)

 

seems no problem exept 0x00000000 0x00000000, can i use yours HDAudio.kext to replace the one in /System/Library/Extensions now?

 

ATTENTION This kext is only for reporting info, it doesn´t do anything else. Don't put it in Extensions folder.

Edited by Taruga
Link to comment
Share on other sites
guilliamo
guilliamo
Posted
Posted

HP DV9230US notebook:conexant hdaudio

 

kextload: /HDAudio.kext loaded successfully

HDAudio[0x3833800]::CodecDetection-started(0x3580700) by Taruga

/HDAudio::D27:F0 Irq: 22 Vid: 8086 Pid: 27d8

localhost:/ root# HDAudio::Cad Address: 0

HDAudio::Vid/Pid : 0x14f15045 0x00000000 0x00000000

HDAudio::Subsystem : 0x103c30bb

HDAudio::Revision : 0x00100100

HDAudio[0x3833800]::CodecDetection-ended(0x1)

 

Thanks Taruga !!

 

G :wacko:

Link to comment
Share on other sites
lebidou
lebidou
Posted
Posted

Fujitsu-Siemens Amilo Pi 1556 / Realtek ALC 880

 

HDAudio[0x3C48400]::CodecDetection-started(0x397a080) by Taruga
HDAudio::D27:F0 Irq: 22 Vid: 8086 PiD: 27D8
HDAudio::Cad Adress: 0
HDAudio::Vid/Pid		: 0x10573055 0x10573055 0x10573055
HDAudio::Subsystem : 0x10573055
HDAudio::Revision	 : 0x00100700
HDAudio::[0x3c48400]::CodecDetection-ended(0x1)

 

Linux Dump:

Codec: Realtek ALC880
Address: 1
Vendor Id: 0x10ec0880
Subsystem Id: 0x8800000
Revision Id: 0x100800

Link to comment
Share on other sites
aylamrin
aylamrin
Posted
Posted

Hallo Taruga,

I'm using a Desktop and Intel DG33FB mobo. The output is:

kextload: can't contact kextd (continuing anyway)
kextload: extension /HDAudio.kext/ appears to be loadable
kextload: loading extension /HDAudio.kext/
kextload: /HDAudio.kext/ loaded successfully
kextload: sending personalities to kernel:
kextload:     from extension /System/Library/Extensions/IOPCIFamily.kext:
kextload:         IOPCI2PCIBridge-Name
kextload:         IOPCI2PCIBridge-i386
kextload:         IOPCI2PCIBridge-PCI
kextload:     from extension //DAudio.kext:
kextload:         HDAudio
kextload: sending 4 personalities to the kernel
kextload: matching started for /HDAudio.kext/

 

I'm also attaching the codec dump for ALC888... It is an address 2 codec.

Link to comment
Share on other sites
lebidou
lebidou
Posted
Posted
Taruga: Well, the HD Audio Bus can support multiple devices, Audio, Modem, HDMI, etc

At the moment, it seems I can only communicate with the audio codec if it´s in address 0.

I have to get access to a pc with an audio codec in a different address to improve the code or else I´ll have to make a manual option for codecs at other addresses as I need to know where they are to program the codec right.

 

Why is this important ? For ex. for codecs that show input and output devices but don´t work at all, they need some code to modify codec parameters so they can work properly. And this is only one example.

 

What kind of info about the systems with different address do you need? Could it be grabbed with dumps from win or a linux distro ? Do you mean physical access or an access via ARD or so could be enough ?

Link to comment
Share on other sites
Solique
Solique
Posted
Posted
What kind of info about the systems with different address do you need? Could it be grabbed with dumps from win or a linux distro ? Do you mean physical access or an access via ARD or so could be enough ?

 

I've had the same result (no output) yet the Linux codec dump shows address 0.

Link to comment
Share on other sites
inferno0270
inferno0270
Posted
Posted

For ALC268

 

HDAudio[0x28e7800]::CodecDetection-started(0x269cf80) by Taruga
HDAudio::D27:F0 Irq: 21 Vid: 8086 Pid: 27d8
HDAudio::Cad Address: 0
HDAudio::Vid/Pid    : 0x10ec0268 0x00000000 0x00000000
HDAudio::Subsystem  : 0x1025012b
HDAudio::Revision   : 0x00100003
HDAudio[0x28e7800]::CodecDetection-ended(0x1)

Link to comment
Share on other sites
BuXb
BuXb
Posted
Posted

Hi Taruga,

 

wow that looks awesome ;) !!

 

So here's what your kext says about my Conexant HD Audio (in Windows & Linux: 0x14f15047):

 

HDAudio[0x29e0c00]::CodecDetection-started(0x269cd80) by Taruga
HDAudio::D27:F0 Irq: 22 Vid: 8086 Pid: 27d8
:/root# HDAudio::Cad Address: 0
HDAudio::Vid/Pid	: 0x14f15047 0x00000000 0x00000000
HDAudio::Subsystem  : 0x1179ff31
HDAudio::Revision   : 0x00100000
HDAudio[0x00000000]::CodecDetection-ended(0x1)

 

What do you think - does it look as if your final patcher v.2 can enable sound here?

 

Also attached you find my Linux codec dump and the Windows Conexant Driver's inf file for comparison, in case if needed.

 

Thanks a lot, and looking forward to donate soon,

 

Bugs

BD1HDAa.inf.zip

codec_0_CONEXANT_Toshiba_BugsBunny.txt.zip

Link to comment
Share on other sites
mactist
mactist
Posted
Posted

Thanks Taruga for all your efforts. ;)

 

I have Sigmatel 9205 on my Dell Latitude D630 (linux codec dump attached and also windows driver). And what I get from your new HDAudio3.kext is:

 

bash-3.2# kextload -v /HDAudio.kext

kextload: can't contact kextd (continuing anyway)

kextload: extension /HDAudio.kext appears to be loadable

kextload: loading extension /HDAudio.kext

kextload: /HDAudio.kext loaded successfully

kextload: sending personalities to kernel:

kextload: from extension /System/Library/Extensions/IOPCIFamily.kext:

kextload: IOPCI2PCIBridge-Name

kextload: IOPCI2PCIBridge-i386

kextload: IOPCI2PCIBridge-PCI

kextload: from extension //DAudio.kext:

kextload: HDAudio

kextload: sending 4 personalities to the kernel

kextload: matching started for /HDAudio.kext

 

Is there any way to make this soundcard work. I tried the HDAPatchers 1.17,1,18 also but no luck.

sigmatel9205.txt

92XXM4_3.INI.txt

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...