deepen Posted January 28, 2008 Share Posted January 28, 2008 Current OS X Version: 10.5.1Install method: Kalyway 10.5.1 , MBR partition map, EFI desktop Prebuilt: Yes Manufacturer: dell Model: xps 410 / dimension 9200 Motherboard Manufacturer: dell oem Bios Version:dell Chipset: intel 965 Audio: sigmatel 9227 working with taruga patcher LAN:intel gigabit ACPI unreliable CPU Model Number: q6600 Recognised as: core 2 qaud 2.4ghs, mac pro Memory/DDR: 2gb 667mhz ddr2 Video Manufacturer: Nvidia Model: nvidia 8300gs Bus Type: PCIe x16 (i think) Memory size: 128mb resolution: 1900 x 1200 x 32 with 8600gt driver from the drivers forum Dual screen: not tested QE/CI: works Resolution changeable: yes Required patches or bios flashing: SATA/IDE working: SATA dvd and drives working ich8r. no ide Wifi: realtek 8187b working sproadically with 10.4 driver, update promised from realtek end of feb canon ip6700d working capture one 4 installed ATI hdtv wonder not working, remote wonder not working can u tell me the steps how you start the sigmatel and using which tarunga patcher and configuration.....?? plz it's an request..... from the last 6th month I am trying so hardly to configure sigmatel to work but I am fail to do that... so, plz tell me steps to start an sigmatel audio.............. Link to comment Share on other sites More sharing options...
wolfvilleian Posted January 28, 2008 Share Posted January 28, 2008 Current OS X Version: 10.5.1 Install method: Kalyway, EFI working Desktop/Laptop? Prebuilt? Manufacturer: HP Model: DV6565CA Motherboard Manufacturer: Model: DV6000 Version: Bios Version: F.23 Chipset: Audio: Not working LAN: working CPU Model Number: Core 2 Duo T5450 Recognised as: 1.67Ghz Memory/DDR: 2GB DDR2 Video Manufacturer: Nvidia Model: 8400M Bus Type: onboard Memory size: 128mb QE/CI working? (not sure what this is) Resolution changeable: No Note: There is no native driver, waiting for 10.5.2 for native driver. Sata working Bluetooth working Still working on getting audio and wireless support, will update once issues have been fixed. Link to comment Share on other sites More sharing options...
kozakpawel Posted January 28, 2008 Share Posted January 28, 2008 Current OS X Version: 10.5.1 Install method: Kalyway, EFI working Laptop Manufacturer: Toshiba Model: A205-S7464 Motherboard Manufacturer: Toshiba Model: N/A Version: N/A Bios Version: Chipset: Intel 965GM Audio: Intel HDA working with Taruga Installer 2 (ALC268) LAN: Marvell Yukon Ethernet working with AppleYukon kext CPU Model Number: Core 2 Duo T5250 Recognised as: 1.5GHz Intel Core 2 Duo Memory/DDR: 2 GB DDR2 667MHz Video Manufacturer: Intel Model: X3100 Bus Type: onboard Memory size: 144MB VRAM Dual screen working - yes QE/CI working - yes Resolution changeable - yes I installed package with iATKOS installation SATA/IDE working: yes Wifi don't working (Intel 3945abg) card reader 5in1 don't working misc hardware: build-in camera working (Chicony USB 2.0) System recognized my laptop as "Mac Pro" Link to comment Share on other sites More sharing options...
fdisk Posted January 28, 2008 Share Posted January 28, 2008 Current OS X Version: 10.5.1 Install method: iatkos 1.0i Computer Prebuilt: Custom built Computer type: Desktop Motherboard Manufacturer: Intel Model: dg31pr Version: Bios Version: BIOS Revision 0038 Chipset: 3100 Audio: onboard, - after realtek alc888 patch mic/sound works LAN: not working, no patches yet USB: working PS/2: doesnt work with old IBM keyboard, need ps/2 to USB, if that is done- intel boot does not recognise it. CPU Model Number: Intel e2180 Socket: 775 Recognised as: 1.8GHz two core Memory/DDR: Bus Type: DDR2 800mhz Detected: 2GB Video Manufacturer: Onboard intel Model: 3100 Bus Type: Memory size: 128Mb Dual screen: only 1 analog outlet QE/CI: Works Resolution changeable: no Patches: INtel video driver (came with DVD) SATA/IDE working: SATA Working: perfect 2 hd PATA Working: could not get to recognise, didnt try that hard. monitor lcd; lg l226wtx only 1024x768 Link to comment Share on other sites More sharing options...
terpsy Posted January 28, 2008 Share Posted January 28, 2008 Current OSX Version: 10.5.1 Install Method: Kalyway 10.5.1 Intel (Booting with EFI/Vanilla) Desktop/Laptop? Desktop Motherboard: Maufacturer:Gigabyte Model: GA-G33M-S2 Chipset: G33 Express Chipset Audio: ALC889A LAN: Works Required Patches: ALC889A patch USB Ports: All working CPU Model: Intel Core 2 Duo E6750 Speed: 2.66 GHz RAM: 4x1GB Patriot Extreme 800 MHz Sticks Video: Manufacturer: Nvidia Model: Nvidia GeForce 8600GT XXX Bus Type: PCIe x16 Memory size: 256 Mb Dual screen working: Not Tested QE/CI working: Yes Resolution changeable: Yes Required patches: 10.5.2 Kext SATA/IDE: Both work. Using the JMicron patch from the Kalyway setup for SATA, but can work without it. DVD Burner: Samsung PATA 18X DVD/RW HDD: SATA Seagate 7200.10 250GB LAN: Onboard working Link to comment Share on other sites More sharing options...
theWANDERER Posted January 29, 2008 Share Posted January 29, 2008 Current OS X Version: 10.5.1 Install method: Kalyway Desktop/Laptop? Desktop PC Prebuilt? No, self-assembled Manufacturer: none Model: none Motherboard Manufacturer: Asus Model: P5KR Version: Bios Version: 0403 Chipset: P35 ICH9R Audio: Onboard audio not working (I do need it, so I just leave it. I did see a driver offered by others) I have another usb dac audio device, and it's working perfectly LAN: Onboard network not working, purchased a Realtek RTL8139 10/100 lan card to replace it. Required patches: None (Audio driver if you need.) CPU Model Number: Intel Core 2 Duo E6750 Recognised as: 2.67 Ghz Intel Core 2 Duo, one processor, two cores, 4mb L2 Memory/DDR: 4 GB (2x2mb UMAX DDR2 800) Video Manufacturer: Gigabyte Model: NVidia 8600GT Bus Type: PCIE Memory size: 256 Mb Dual screen working? Working with NVInject kext from 10.5.2 QE/CI working? Yes Resolution changeable? Yes Required patches: NVInject kext from 10.5.2 Known Issue: Random screen freeze happens when making modifications in system preference. I can only move the cursor over the screen. There's no response neither clicking anywhere on the screen nor pressing any button of the keyboard. All I can do is to press the reset button, and this problem has been confirmed as the video driver problem. http://forum.insanelymac.com/lofiversion/i...php/t82875.html IDE working: dont know, there's no ide devices in my computer SATA working : all working(2 SATA2 HD, 2 SATA HD, 1 SATA DVD-R) Wifi & patches? dont know, there's no wifi devices in my computer other peripherals/pci addon cards? Video card (see above) Realtek RTL8139 10/100 USB DAC audio device many USB Hubs Current OS X Version: 10.5.1 Install method: Kalyway Desktop/Laptop? Desktop PC Prebuilt? No, self-assembled Manufacturer: none Model: none Motherboard Manufacturer: ASUS Model: P5GDC Pro Version: unknown Bios Version: unknown Chipset: 915 Audio: Onboard audio not working LAN: Onboard network working without patch Required patches: None CPU Model Number: Intel 530 Recognised as: 3.2 Ghz unknown Memory/DDR: 1 GB (2x512mb DDR2 667) Video Manufacturer: MSI Model: NVidia 6200 Bus Type: PCIE Memory size: 256 Mb Dual screen working? no working QE/CI working? Yes Resolution changeable? Yes Required patches: NVInject/NATIT/Titan IDE working: All working(2 IDE HD, 1 IDE DVD-ROM) SATA working: No SATA dev Wifi & patches? dont know, there's no wifi devices in my computer other peripherals/pci addon cards? Video card (see above) USB DAC audio device many USB Hubs Link to comment Share on other sites More sharing options...
pierrot13 Posted January 30, 2008 Share Posted January 30, 2008 Hi everybody, So... Current OS X Version: 10.5.1 Install method: Kalyway 10.5.1, EFI working Desktop/Laptop? Prebuilt? Manufacturer: Dell? Model: Inspiron xxx? Motherboard Manufacturer: Gigabyte Model: GA-945GCMX-S2 Version: 6.6 Bios Version: ? Chipset: Intel 945 Audio: Audio is working with "skippyretard's patch" (Realtek ALC888) LAN: working 100% out of box CPU Model Number: Intel Pentium 4 2,8Ghz Recognised as: 2,8GHz unknown Memory/DDR: 2X1GB DDR2 800MHz Kingmax Video Manufacturer: Intel Model: GMA 950 Bus Type: onboard Memory size: 64 Mb max Dual screen working? I don't try but I think it works QE/CI working? Yes Resolution changeable? Yes Required patches or bios flashing? No SATA/IDE working: Both Wifi & patches? I don't know other peripherals/pci addon cards? No misc hardware: Sleep/Shut down/Restart fully working. Update works perfectly. It's really a very good mobo for osX ... Excuse me for my english, I'm french Bye Pierrot Link to comment Share on other sites More sharing options...
AcidRain9 Posted January 30, 2008 Share Posted January 30, 2008 Current OS X Version: 10.5.1 Install method: ToH Desktop/Laptop: Desktop Motherboard Manufacturer: MSI Model: K9N SLI Platinum Version: Bios Version: Chipset: nVidia nForce 570 SLI Audio: ALC883 - working used patch here Onboard LAN: works but froze often with Forcedeth (disabled) CPU Model Number: AMD Athlon X2 4800+ Recognised as: 2.4GHz Memory/DDR: 4Gb Corsair XMS2 800Mhz (1Gb x 4) Video Manufacturer: ATI Model: Radeon X1600 Bus Type: PCIe x16 Memory size: 512Mb QE/CI working? Yes Resolution changeable? Yes Resolution: 1600x1050@60Hz Required patches: BorisBadenov Method SATA/IDE: IDE / SATA - working with Medevils AppleNForceATA.kext booting from PATA - SATA gives me "IOATAController Device Blocking Bus" error on boot Other peripherals/pci addon cards: Startech 10/100-Mbps PCI Ethernet Card - Working without patch Microsoft Optical Desktop Elite for Bluetooth - working USB - working Firewire - working Link to comment Share on other sites More sharing options...
Fr0 Posted January 31, 2008 Share Posted January 31, 2008 Current OS X Version: 10.5.1 Install method: Kalyway DVD, EFI + Vanilla Kernel + Vanilla Kernel ACPI Prebuilt Laptop Manufacturer: Toshiba Model: Satellite A105-4211 Motherboard Manufacturer: Toshiba/Intel Model: N/A Version: N/A Bios Version: N/A Chipset: Mobile Intel 945GM, ICH7/M Audio: Realtek ALC861 working? yes - speakers and headphone jack both work patches? installed AZALIA_out kext on Kalyway disc during installation LAN: Intel PRO100/VE (1092 8086) working? yes patches? must add "-f" kernel flag at boot, otherwise AppleIntel8255x kext doesn't properly load CPU Model Number: Core Duo T2050 Recognised as: 1.6 GHz Memory/DDR: 2x 1GB DDR2-533 DIMMs (Crucial brand) Video Manufacturer: Intel Model: GMA950 Bus Type: Integrated Memory size: N/A Dual screen working? Untested QE/CI working? Yes Resolution changeable? Yes Resolution? 1280x800 Patches? None - Autodetected on booting the Kalyway disc, automatically set screen native resolution. SATA/IDE working: Yes - detects both DVD-RAM drive and internal HD, mounts Windows partitions. Wifi & patches? Intel 3945abg wifi card, does not function, patches completely untested other peripherals/pci addon cards? PCMCIA working with IOPCCardFamily and IOPCIFamily patches (found here) misc hardware: Using a Buffalo WLI-CB-G54L PCMCIA Wifi adapter, automatically detected as a "Broadcom 802.11bg" Wireless adapter, uses internal Apple drivers (GUI configuration and Airport menu all working). ACPI seems a bit iffy. CPU Fan seems to run more than it would in Windows, and the CPU does seem to run a bit hotter than in Windows (CPU temp monitor doesn't function, so I cannot tell for sure). Also, I get no battery meter or power-saving information/configuration options even though it is a laptop. Occasionally, the laptop locks up at the boot screen. I got one full BSOD-style crash and a few instances where the login screen doesn't appear after boot. External USB hard disks and such work fine. Leopard was installed onto and boots from an external USB disk (This is my wife's laptop, so I was completely forbidden from installing it on her internal HD for fear it would mess up her exisiting XP install) Link to comment Share on other sites More sharing options...
sbg Posted January 31, 2008 Share Posted January 31, 2008 Current OS X Version: 10.5.1 Install method: Kalyway EFI working Desktop Prebuilt? No Motherboard Manufacturer: Gigabyte Model: GA965P-DS3 Version:3.3 Bios Version: F12 Chipset:Intel 965 Audio: working? yes, patched with ALC888Audio LAN: working? yes, no patches necessary Required patches etc? CPU Model Number: Core 2 Duo E6750 Recognised as: e.g. 2.6GHz? Memory/DDR: CORSAIR XMS2, DDR2 800 Mhz Video Manufacturer: XFX Model:7600 GT Bus Type: PCIe x16 Memory size: 2GB Dual screen working? don't know, not tested QE/CI working yes Resolution changeable? yes Required patches or bios flashing? NVinject Had to move to monitor to 2nd DVI output (closest to motherboard plane) otherwise pixelated screen after wakeup from sleep SATA/IDE working: yes (AHCI enabled, native mode enable) 250 GB Seagate SATA HDD (orange port) Pioneer DVR-106 using IDE - SATA adapter (orange port) 60GB IBM IDE HDD (IDE port, mode set to IDE) Wifi & patches? N/A other peripherals/pci addon cards? NO Sleep working with PC-EFI HPET enabled, 64 bit ACPI suspend: S3 Link to comment Share on other sites More sharing options...
panki_86 Posted January 31, 2008 Share Posted January 31, 2008 Current OS X Version: 10.5.1 Install method: iatkos v1.0 ir2 Desktop Manufacturer: Costum Motherboard Manufacturer:Gigabyte Model:GA-G31MX-S2 Chipset:G31 Audio: Realtek HD 888 (realtek mac os driver) WLAN: Asus 167g (RT2500 replug) CPU Model Number: Core 2 Duo E6550 Recognised as: 2.33GHz Memory/DDR: 1GB kingston 800MHz+2GB Transcend 800Mhz Video Manufacturer:Gigabyte Model:8600GT Bus Type: PCIe x16 Memory size:256MB Resolution changeable: Yes Patch: 10.5.2 Nvida kexts SATA/IDE working: 320 GB WD sata2 fully working I have a dual boot Vista/leopard with EasyBCD 1.7.1 end everything working great! Link to comment Share on other sites More sharing options...
eastone Posted February 2, 2008 Share Posted February 2, 2008 Current OS X Version: 10.5.1 Install method: Kalyway 10.5.1 VANILLA+ EFI Guid Manufacturer: Acer Model: Extensa 5513 WLMi (5510 series) Chipet :Intel 945PM/GM without patches VGA :GMA 950 -64 MB shows system profiler- QE&CI FULL SUPPORT Ram :1 GB 667 Mhz CPU :Core2Duo 1.66 Ghz T5500 without patches Audio: ALC883 without patches :speakers ,audio out and internal&external mic LAN :Broadcom 4401 without patches SATA/IDE : without patches Battery Management:Does not work(yet) ENE CardReader: Does not Work(yet) Touchpad:without patches but not working midlle button WiFi :not working(yet ?) Link to comment Share on other sites More sharing options...
Sanddy Posted February 2, 2008 Share Posted February 2, 2008 Current OS X Version: 10.5.1 Install method: Kalyway 10.5.1 DVD. Not choosing the vanilla kernel, using the default kernel in the DVD. Desktop Motherboard: Intel Original 915GAV Manufacturer: Intel Model:915GAV Version: Bios Version: Chipset: 915GAV Audio: Working when selecting the audio drivers that come in the DVD while installation. LAN: working Required patches: no extra patch required, everything seems to be working. CPU Model Number: P4 3.0Ghz HT Memory/DDR: 1GB DDR-400 Video Manufacturer: Intel Model: GMA 900 Bus Type: Onboard Memory size: 256 MB Shared Dual screen: there are no dual ports on MB QE/CI working: I don't think so, but do not know where to check. System specs only show Quartz. Resolution changeable: yes Required patches or bios flashing: No, although my bios was previously upgraded to the latest version from Intel. SATA/IDE working: Yes, I have a SATA HDD and a PATA IDE DVD Drive. One thing that was causing issues while installation was that my DVD drive was not set as Master - it was a secondary slave. I read about the issue in this forum (I am not the original person to resolve the issue), and set my DVD drive as Secondary Master and then installation went fine. I would recommend that you start the installation using the -v switch after DVD booting so that if any errors occur you can view them. The first time I booted from the DVD there was an error (due to the DVD being Slave) and the HDD just kept spinning for 1 hour after which I rebooted with the -v switch to see the error. Thanks for release, hope it works for you all too. Link to comment Share on other sites More sharing options...
bidyut Posted February 2, 2008 Share Posted February 2, 2008 Current OS X Version: 10.5.1 Install method: Kalaway, EFI working: Yes Desktop/Laptop: Laptop Prebuilt: Yes Manufacturer: HP Model: Pavilion dv2000 Motherboard Manufacturer: Model: Version: Bios Version: F.23 Chipset: Intel 945GM Audio: Working with Azalia: Speakers only. Built-in mic don't work. LAN: Yes, needed to modify AppleIntel855x.kext to detect this model Required patches: No other patches were required. Software update worked fine. CPU Model Number: Core Duo T2300 Recognised as: 1.66Ghz Memory/DDR: 2048MB (OCZ) Video Manufacturer: Intel Model: GMA 950 Bus Type: onboard Memory size: 64MB Dual screen working: Have not tried QE/CI working? Resolution changeable? Required patches or bios flashing: None SATA/IDE working: Yes, both. WiFi: Not working. I noticed that someone is trying to get 3945 working. misc hardware: Built-in webcam: working. Note: Boot only works with MBR. GUID fails to boot. Doesn't boot with USB mouse plugged in. Link to comment Share on other sites More sharing options...
kxf Posted February 2, 2008 Share Posted February 2, 2008 Current OS X Version: 10.5.1 Install method: ToH with EFIv5 manually installed Desktop/Laptop: Desktop Prebuilt?: No Manufacturer: N/A Model: N/A Motherboard Manufacturer: ASROCK Model: Conroe 945G/DVI Version: Bios Version: 1.9 Chipset: North Bridge 945G - South Bridge ICH7 Audio: yes, no patches LAN: yes, no patches Required patches none CPU Model Number: Core 2 Duo E4500 Recognised as: 2.19GHz Memory/DDR: 2GB DDR2 Video Manufacturer: Intel Model: GMA950 Bus Type: onboard Memory size: 64 MB Dual screen working (Worked at one point, inconsistent. May be do to unrelated hw issues) QE/CI working? Yes Resolution changeable? Yes Required patches or bios flashing? Flashed to latest bios for mobo SATA/IDE working: Yes Wifi & patches? No wifi installed other peripherals/pci addon cards? no misc hardware: logitech quickcam pro 5000 used to support all mac apps requiring image and for audio in Link to comment Share on other sites More sharing options...
pguanyj1983 Posted February 2, 2008 Share Posted February 2, 2008 Current OS X Version: 10.5.1 Install method: Kalyway+Vanilla kernel+GUID+AHCI Desktop/Laptop: desktop Prebuilt: no Manufacturer: Model: Motherboard: GA-p35-DS3L Manufacturer: Gigabyte Model: Version: rev. 2 Bios Version: F7 Chipset: p35 Audio: working with AppleHDA.kext and ALCinject.kext LAN: working out of box Required patches: no CPU Model Number: E2140 Recognised as: 3GHz by overclocking Memory/DDR: 4GB at 667Hz all detected Video XXX 8600GT Manufacturer: XXX Model: Bus Type: PCIe x16 Memory size: 256 Dual screen: not tested QE/CI: QE supported and CI hardware accelerated Resolution changeable: yes Required patches or bios flashing: only patched by NVinstaller v.31 SATA/IDE: working Wifi & patches: abit airpace pci 1x cannot even be detected other peripherals/pci addon cards? misc hardware: no restart works, shutdown worked once right after I installed the system, after that not working anymore. Link to comment Share on other sites More sharing options...
letsgo Posted February 2, 2008 Share Posted February 2, 2008 Current OS X Version: 10.5.1 Install method: Kalyway; EFI Working: Yes Desktop/Laptop? Desktop Prebuilt? No Motherboard Manufacturer: Gigabyte Model: GA-945GZM-S2 Version: rev. 3.0 Bios Version: unknown Chipset: Intel 945GZ Audio: working, select 883 option at install LAN: working, no patches needed CPU Model Number: Intel Core 2 Duo E4400 2.0GHz Recognised as: 2 GHz Intel Core 2 Duo Memory/DDR: (x1) G.SKILL Extreme Series 1GB 240-Pin DDR2 SDRAM DDR2 533 Video Manufacturer: Asus Model: 7300GT Silent Bus Type: PCIe Memory size: 256 MB Dual screen working? unknown QE/CI working? Yes/Yes Resolution changeable? Yes Required patches or bios flashing? Select Gfnvidia at install SATA/IDE working: IDE working SATA unknown other peripherals/pci addon cards? Pioneer DVR-112D (working but must flash firmware fix in Windows) LaCie Firewire 400 PCI card misc hardware: LaCie FireWire 400 HD (F.A. Porsche) misc software: Dualboot with XP using Acronis OS Selector Link to comment Share on other sites More sharing options...
rogerk Posted February 2, 2008 Share Posted February 2, 2008 Current OS X Version: 10.5.1 Install method:KalywayDVD ToH, etc, EFI working??? Desktop Prebuilt? NO Manufacturer: Home brew Model: Motherboard Gigabyte P35 DQ6 Manufacturer:Gigabyte Model: P35 DQ6 Version: 1 Bios Version: 6 Chipset: P35 Audio: working? patches? Not yet, made a mistake with 10.4.9 and installed too many patches, never worked LAN: working? Yes Straight off DVD, patches? None Required patches etc? none yet CPU Model Number: e.g. Core 2 Duo E6600? Recognised as: e.g. 3.4GHz (was 2400) Memory/DDR: 2GB 1033 Dominator Video GeForce 7600 GT Manufacturer:GeForce Model:7600GT Bus Type: PCIe x16 onboard? No Memory size:256 Dual screen working? Not tested yet, but probably QE/CI working? Resolution changeable? running 1600 x 1200 Required patches or bios flashing? No SATA/IDE working: SATA2 working OK, ATA working OK, SATA2 DVD working OK Wifi & patches? other peripherals/pci addon cards? misc hardware: VISTA 2 x 500GB raid not found, XP drive found, Link to comment Share on other sites More sharing options...
korhojoa Posted February 2, 2008 Share Posted February 2, 2008 Current OS X Version: 10.5.1 Install method: ToH 10.5.1 + Software Update Laptop Prebuilt Manufacturer: IBM/Lenovo Model: Thinkpad x60 Motherboard Manufacturer: IBM Model:17065KG Version: Dunno Bios Version: Haven't checked. Chipset: 945GM Audio: yes, with intel hda patch LAN: yes, no patches Required patches etc? CPU Model Number: Core Duo Recognised as: 1.83 GHz, 1 core, activity monitor however shows both cores, and apparently it uses both Memory/DDR: 1.5 Gb, ddr2 Video Manufacturer: Intel Model: GMA 950 Bus Type: Built In Memory size: 8mb (reported by bootloader) Dual screen: yes QE/CI working: yes Resolution changeable: yes Required patches or bios flashing: no SATA/IDE working: yes, full sata function Wifi doesn't work, as there is still no driver for the Intel A/B/G chipset. misc hardware: It boots off a buffalo usb hdd, using efi with native kernel. Modem isn't detected, but who uses one anyway. No clue if there is a driver for it. Battery charge status is displayed just fine, and FireWire also works natively. PCMCIA support i have not installed, as i didn't need it. Link to comment Share on other sites More sharing options...
drumthrasher109 Posted February 3, 2008 Share Posted February 3, 2008 Current OS X Version: 10.5 Install method: JaH 10.4.8 Tiger, then ToH 10.5 over that. Desktop (Gateway GT4016 with another HD, updated Video Card) Prebuilt: Yes Manufacturer: Gateway Model: GT4016 Motherboard Manufacturer: First International Computer, Inc Model: KTBC51G (http://www.fic.com.tw/product/motherboard/AMD/KTBC51G.aspx) Version: n/a Bios Version: n/a Chipset: nForce 4 Audio: working? patches? Working (with ALC880 kext/AppleHDAaudio) LAN: working? patches? Working (with forcedethno blabla kext) CPU Model Number: AMD Athlon 64 3700+ 2.2GHz Recognised as: 2.2GHz Unknown (something lke that) Memory/DDR: 2048GB PC3200 DDR400 184-pin Video Manufacturer: ATI Model: 2600PRO 512MB Bus Type: PCIe x16 Memory size: 512 Dual screen working? n/a QE/CI working? not sure what that is Resolution changeable? Yes Required patches or bios flashing? Patches, 2xxx HowTo SATA/IDE working: Yes Wifi & patches? No other peripherals/pci addon cards? Wireless PCI card, don't use it though. Link to comment Share on other sites More sharing options...
Grim Reaper Posted February 3, 2008 Share Posted February 3, 2008 Please add to my previous information about installing Kalway Leopard 10.5.1 Intel SSE2 & SSE3 efi V8 post in the Leopard 10.5.1 HCL for Dell Latitude D600 I got the PCMCIA/Cardbus slot working on the Dell Latitude D600 by following the driver installation instructions at: http://forum.insanelymac.com/lofiversion/i...php/t81036.html Login as Root Follow the instructions at: http://forum.insanelymac.com/lofiversion/i...php/t81036.html to replace the IOPCCardFamily and IOPCIFamily drivers Reboot Insert a PCMCIA/Cardbus card Enjoy! Here's the proof of my Dell Latitude D600 PCMCIA/Cardbus slot working with an Adaptec DuoConnect AUA-1411 USB 2.0/1394 Cardbus card with a USB Flashdrive inserted into it and mounted on the desktop: pci104c,8024: Function: FireWire Controller Vendor: Unknown Type: CardBus Vendor ID: 4172 Device ID: 32804 pci1033,35: Function: USB Controller Vendor: Unknown Type: CardBus Vendor ID: 4147 Device ID: 53 pci1033,35: Function: USB Controller Vendor: Unknown Type: CardBus Vendor ID: 4147 Device ID: 53 pci1033,e0: Function: USB Controller Vendor: Unknown Type: CardBus Vendor ID: 4147 Device ID: 224 SmartCardBus Reader: Function: Unknown Vendor: O2Micro Type: PC Card Vendor ID: 65535 Device ID: 1 USB Bus: Host Controller Location: CardBus Slot Host Controller Driver: AppleUSBOHCI PCI Device ID: 0x0035 PCI Revision ID: 0x0043 PCI Vendor ID: 0x1033 Bus Number: 0xfe Flash Disk: Capacity: 125 MB Removable Media: Yes Detachable Drive: Yes BSD Name: disk1 Version: 1.10 Bus Power (mA): 500 Speed: Up to 12 Mb/sec Manufacturer: USB Mac OS 9 Drivers: No Partition Map Type: MBR (Master Boot Record) Product ID: 0x6828 Serial Number: 312Fxxxxxxxxxxx... S.M.A.R.T. status: Not Supported Vendor ID: 0x0ea0 Volumes: FLASHDRIVE: Capacity: 125 MB Available: 5.3 MB Writable: Yes File System: MS-DOS FAT32 BSD Name: disk1s1 Mount Point: /Volumes/FLASHDRIVE Now, if I could get Sleep, Wake, etc. working I would be elated! D600_Hackintosh_VolksMac.tiff Link to comment Share on other sites More sharing options...
sage Posted February 3, 2008 Share Posted February 3, 2008 Current OS X Version: 10.5.1 Install method: iATKOS 1.0irc2 Desktop/Laptop? Desktop Prebuilt? No Motherboard Manufacturer: Asrock Model: 775i65GV Version: 1.90 Bios Version: Dunno Chipset: 865GV / ICH5 Audio: CMI9739A - Working out-of-the-box, AC'97, no need to switch output jack. LAN: RTL8101 - Working with Realtek 8169 patch. Required patches: EFI Emulation SSE2-SSE3 Patch Remove CPUPowerManagement CPU Model Number: Celeron D 326 (2,53 GHz) Recognised as: Intel® Celeron® CPU 2,53 GHz Memory/DDR: 1,5 GB DDR400 Video Manufacturer: NVIDIA Model: 6200 A1 Bus Type: AGP8x Memory size: 256 MB Dual screen working? N/A QE/CI working? Yes Resolution changeable? Yes Required patches? Working with NVInject included with iATKOS. SATA/IDE working: Out of the box. Maxtor PATA 160 GB Samsung SATA 250 GB WDC SATA 250 GB HL-DT-ST DVDRAM GSA-H10A (Haven't tried burning yet, I guess it works) Wifi & patches? N/A other peripherals/pci addon cards? N/A misc hardware: Genius PS2 keyboard and mouse, all working fine. Notes: - Formatted unused space on my (MBR) IDE disk (already had 1 NTFS partition) as HFS+ (no actual dualboot, the other partition was for storage only), installation went smoothly. - LAN needs 8169 patch. - Audio output says line out, regular speakers jack is used, but global Volume control doesn't work (it's probably ICH5 driver's fault, the same thing happens in Linux with that driver). - "About this Mac" closes all applications and reboots the GUI. - I used the SSE2 patch, but this processor is SSE3-enabled so it should work without patch, maybe I will try installing without SSE2 patch next time. - NVInject driver wrongly detects the card as 128MB, but 6200A doesn't use TurboCache so it should be 256MB instead. Tried with NVInject patch included with iAtkos 1.0irc2, will test latest NVInject V31 later to see if it can be fixed. **UPDATE** NVInject V31's 9C20 drivers correctly detect 256MB! Yay!!! EDIT: 200th post in the thread yay! Link to comment Share on other sites More sharing options...
Rich_S14 Posted February 5, 2008 Share Posted February 5, 2008 Current OS X Version: 10.5.1 Install method: Kalyway 10.5.1 Desktop/Laptop: Laptop Prebuilt: Yes Manufacturer: Dell Model: Vostro 1500 Motherboard Manufacturer: Dell Model: (Update pending) Version: (Update pending) Bios Version: (Update pending) Chipset: Intel GME965 Audio: Not working LAN: Working (no patches) CPU Model Number: Intel Core 2 Duo T5470 @ 1.6 GHz Recognised as: 1.6 GHz Intel Core 2 Duo Memory/DDR: 2 GB 667 MHz DDR SDRAM Video Manufacturer: NVidia Model: GeForce 8600M GT (Vendor_ID: 0x10DE Device_ID: 0x0407) Bus Type: PCIe x16 Memory size: 256 MB Dual screen working: (Update pending) QE/CI working: Supported/Hardware Accelerated Resolution changeable: Yes Required patches or bios flashing: Yes, 10.5.2 kexts used. See NVInstaller v.31 from ScottDAngel.com/blog. SATA/IDE working: Yes Wifi & patches: WiFi recognized as "Third Party Wireless Card" other peripherals/pci addon cards: (Test of eSATA ExpressCard pending) misc hardware: None Link to comment Share on other sites More sharing options...
ferre Posted February 5, 2008 Share Posted February 5, 2008 Current OS X Version: 10.5.1 Install method: Kalyway GUID 10.5.1 EFI working Motherboard Manufacturer: ASUS Model: P5B Deluxe Version: ¿? Bios Version:¿? Chipset: 965 Audio: working but no audio In LAN: 1st ethernet working out of the box Required patches Jmicron require Patch CPU Model Number: Core 2 Duo E6600? Recognised as: 2.4GHz? Memory/DDR 2 GHz two dimm's Video Manufacturer:Asus Model: ATI x1600pro 512 mhz Bus Type: PCIe x16 Memory size: 512 Dual screen working QE/CI working Resolution changeable SATA/IDE working: IDE mode whit Jmicron patch included in Kalyway DVD Link to comment Share on other sites More sharing options...
Doug the Impaler Posted February 5, 2008 Share Posted February 5, 2008 Current OS X Version: 10.5.1 Install method: Kalyway EFI GUID Motherboard: Manufacturer: ASUS Model: P5B-Plus Version: unknown PCB Bios Version: 1002 Chipset: P965/ICH8R Audio: ADI1988 (not B, just regular 1988), line-out with patched AppleAzaliaAudio.kext LAN: Attansic Gig-E, not working CPU Model Number: Intel Pentium Dual Core E2140 overclocked to 2.93GHz Recognised as: Intel Core2 Duo Memory/DDR: 3GB DDR 733 (366MHz bus) Video Manufacturer: MSI Model: GeForce 8800GT Bus Type: PCI express Memory size: 512MB QE/CI working? Yes, Resolution changeable? yes Required patches? Used newest nVinject with 10.5.2 kexts SATA/IDE working: yes (no patches, used SATA DVD and HDD in AHCI mode, J-Micron IDE and eSATA ports detected, untested.) Other: Realtek 8139 LAN card Link to comment Share on other sites More sharing options...
Recommended Posts