FAQ & RULES

Taruga · December 5, 2007

Rules - Don´t create new threads (or they will be deleted), post on the already created ones. Thanks

How do I install a .kext ?

Copy files to /System/Library/Extensions/
Then open /Applications/Utilities/Terminal and do the following:

sudo -s	  (then enter your root password)
chown -R root:wheel /System/Library/Extensions/AppleHDA.kext
chown -R root:wheel /System/Library/Extensions/ALCinject.kext
chmod -R 755 /System/Library/Extensions/AppleHDA.kext
chmod -R 755 /System/Library/Extensions/ALCinject.kext
mv /System/Library/Extensions/AppleAzaliaAudio.kext /		 (If you have AppleAzaliaAudio.kext, then do this commando also)
rm -f /System/Library/Extensions.*
rm -Rf /System/Library/Extensions/Caches
reboot

How do I use AppleHDA Patcher ?

First download a codec dump for your own sound card vendor and model
After having a codec dump, drag it into the AppleHDA Patcher
(the patcher will start after this, asking for your root password)

Don´t run the patcher, you always have to drag and drop the codec dump into the patcher icon. It cannot be running when you do that

Why does the Patcher say I have an unsupported codec when I know it´s supported ?

The reason is that the Patcher works with Plain Text and Unix Line Breaks formating.

(Rich Text Format and DOS Line Breaks are not interpreted by the patcher)

You can use, for ex. BBEdit to open and convert the dump to the right format.

Open the dump with BBEdit, choose File -> Save As - choose Options and select Unix as Line Breaks

How do I make a linux codec dump ? - By Metajames

OK, this is for everyone who is confused about how to get the linux codec dump. This is how I did it, you can do it other ways but basiclly you need to boot linux, cat /proc/asound/card0/codec#1 and save the output so you can feed it to the patcher on OSX.

I saved mine directly to a USB stick, make sure to make it writable by right clicking on it and selecting the option if you do that. I will describe a email method below since I think it is a bit more straightforward. If anyone has problems with these steps let me know and I can revise this post.

1) Download Knoppix Live CD Linux Distro

http://www.kernel.org/pub/dist/knoppix/KNO...07-01-04-EN.iso

2) Burn the Knoppix iso to a CD-R

3) Boot your Hackintosh from the Knoppix CD you just burned (press enter at the prompt to fully boot into gui)

4) Open a terminal session from the dock, the icon looks really similar to the OSX one, black screen with a ">"

5) Type in the following command

cat /proc/asound/card0/codec#1 > ~/Desktop/codec_dump.txt

6) Now you have a file on your desktop called "codec_dump.txt"

7) Launch the web browser (Konqueror) and use web based email to email the file to yourself.

8) Reboot the computer and remove the Knoppix CD

9) Boot into OSX86 from your HDD

10) Download the appropriate patcher from post #1 of this thread

11) Download your codec_dump.txt from you email account

12) Drag and drop codec_dump.txt onto the patcher (Taruga frog icon) Turtle! Not a frog.

13) Follow patcher prompts and reboot

14) Post your results into the results thread (include your codec_dump.txt but please rename it to something appropriate ie, chipset and mobo make/model)

Hey everybody! It´s a Turtle, not a Frog. Don´t drag the codec dump into the Frog (the Frog might be evil :censored2:)

Look at my avatar... see ? It´s a turtle. Look at the full patcher pic:

macgirl · December 6, 2007

Yeah, your avatar looks alot like a frog, but frogs don't have tails

tchow · December 7, 2007

THANKS THANKS TARUGA. You are the Hero

Thanks

wmarsh · December 8, 2007

5) Type in the following command
cat /proc/asound/card0/codec#1 > ~/Desktop/codec_dump.txt

For SuSE 10.3 on Dell E520, the correct command for codec dump is:

cat /proc/asound/Intel/codec#2 > codec_dump.txt

macgirl · December 8, 2007

for some reason mine was with codec#0 on kunbuntu.

MACinized · December 11, 2007

in ubuntu edgy eft, it's codec#2. here's the codec dump for my audio controller onboard my intel dp35dp mobo: SigmaTel STAC9271D

sadly, it didn't work in my rig (i used the v1.20 patcher). what's more frustrating is it messed up w/ my network controller settings & lost my i-net connection.

hope u can help me out Taruga & hope further that u can point me to the right direction on how to make my onboard intel 82566dc-2 gigabit lan controller work in my osx86 leopard. tia.

Edited December 12, 2007 by Taruga
The Patcher has nothing to do with the network. To revert patcher changes, just delete ALCinject.kext and AppleHDA.kext.

MACinized · December 12, 2007

so it means that it was just a coincidence that i can't (re)connect to i-net. anyway, hope u can help me out make my onboard audio controller work in my osx86 leopard. i have the download link for the codec dump in my post above. tnx.

Solique · December 12, 2007

I had some trouble with Knoppix in that it didn't present the codec file. I used an Ubuntu 7.10 live CD instead and that was fine.

And one for the hard of understanding, like myself - don't launch the app then drag the file to the icon in the dock, drag the codec file directly onto the application file.

kazer · December 13, 2007

Hi people. I'm new to this, so please excuse my lameless

I tried the procedure, which seemed to work.

The head of my codec dump looks like this :

Codec: Realtek ALC861-VD
Address: 0

Vendor Id: 0x10ec0862

And here is the result of patching :

AppleHDA Patcher - 2006/2007 by Taruga v1.20

* Patching AppleHDA.kext to 0x10ec0862 Done

* Checking AppleHDA for patch Done

0001f4a0 cmpl $0x10ec0862,%eax

00020584 cmpl $0x10ec0862,%eax

* Checking for SPDIF Out Not Detected

* Checking for SPDIF In Not Detected

* Using the following nodes in pathmap

Speaker :

* Copying new config to destination Done

* Repairing Permissions Done

* Deleting Extensions Cache Done

** Done patching - You can reboot now **

Unfortunately, i have no sound, should it be right after patching or after reboot.

Can anyone help?

Thanks in advance.

Edited December 22, 2007 by Taruga
Not working yet with your codec, you´ll need to wait.

KlyX · December 16, 2007

seens that knoppix didn't found my card on my HP 6710b. Command tells me, that there is no directory or file. checked it... There's only oss and seq folders + some files (card, devices, modules, etc.)

Any ideas?

Using Knoppix 5.1

colombodk · December 18, 2007

I, I also have trouble with Knoppix and try to use Ubuntu 7.10 live cd.

What exactly did you type in the terminal to get the output? I keep getting an error 'No such

file or directory' which leaves the file codec_dump.txt on the Desktop but with nothing in it...

When comparing the output you got to the info in the Device Manager -> your audio device, which lines, if any, were similar?

Any suggestion would be appreciated.

/Peter

I had some trouble with Knoppix in that it didn't present the codec file. I used an Ubuntu 7.10 live CD instead and that was fine.

And one for the hard of understanding, like myself - don't launch the app then drag the file to the icon in the dock, drag the codec file directly onto the application file.

biird · December 20, 2007

I, I also have trouble with Knoppix and try to use Ubuntu 7.10 live cd.

What exactly did you type in the terminal to get the output? I keep getting an error 'No such

file or directory' which leaves the file codec_dump.txt on the Desktop but with nothing in it...

When comparing the output you got to the info in the Device Manager -> your audio device, which lines, if any, were similar?

Any suggestion would be appreciated.

/Peter

I am having the same issue. My codec seemed to be codec97#0 when I tried a ls command, but my codec_dump.txt is still blank

stronzo · December 22, 2007

Worked like a charm Taruga! Many thanks mate.

Cheers.

babgolis · January 5, 2008

No luck for me with SigmaTel STAC9274D

Here are results:

* Patching AppleHDA.kext to 0x83847621 Done

* Checking AppleHDA for patch Done

0001f4a7 cmpl $0x83847621,%eax

0002058b cmpl $0x83847621,%eax

* Checking for SPDIF Out Detected

* Checking for SPDIF In Not Detected

* Using the following nodes in pathmap

Back Mic: 7 27 24 21 12

Line In : 28 25 22 16

Speaker : 13 2

Spdif Out: 33 30

* Copying new config to destination Done

* Repairing Permissions Done

* Deleting Extensions Cache Done

** Done patching - You can reboot now **

astrosexy · February 19, 2008

By the way, Knoppix distro link is broken. You can delete the last part of the link and you'll go into the directory though.

blinpa · February 20, 2008

I had the exact same problem with knopix in a Dell vostro 1700 . Im downloading Ubuntu 7.10 to see if that works.

agrafuese · February 21, 2008

Hey guys, I was having the same problem with the Knoppix command, but this seemed to work for me:

cat /proc/asound/card0/codec97#0/ac97#0-0 > ~/Desktop/codec_dump.txt

This gave me a dump with lots of info in it, but I have not gone past this point yet, so I can't say if everything works for me after this step. Hope this helped someone at least.

EDIT: after all that it looks like my codec (ALC850) isn't even supported by the patcher. oh well.

-agra

Lazy Jones · March 3, 2008

cat /proc/asound/card0/codec#1 > ~/Desktop/codec_dump.txt

in Ubuntu 7.10 ("Gutsy Gibbon") it's codec#0 -

- Lazy Jones

a6d9cmro · March 10, 2008

I did a google search and found out the new iMac 24" uses ALC885 audio. Here is what I found. Asterisks denote different sections of the linux codec dump. I hope this helps anyone out there. I have a DFI Lanparty Dark P35-T2RS. If anyone has this board and gotten audio to work correctly, drop me a line.

00:00.0 0600: 8086:2a00 (rev 03)

Subsystem: 106b:00a0

Flags: bus master, fast devsel, latency 0

Capabilities: [e0] Vendor Specific Information

00:01.0 0604: 8086:2a01 (rev 03) (prog-if 00 [Normal decode])

Flags: bus master, fast devsel, latency 0

Bus: primary=00, secondary=01, subordinate=01, sec-latency=0

I/O behind bridge: 00003000-00003fff

Memory behind bridge: 90600000-906fffff

Prefetchable memory behind bridge: 0000000080000000-000000008fffffff

Capabilities: [88] Subsystem: 8086:0000

Capabilities: [80] Power Management version 3

Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-

Capabilities: [a0] Express Root Port (Slot+) IRQ 0

00:1a.0 0c03: 8086:2834 (rev 03) (prog-if 00 [uHCI])

Flags: bus master, medium devsel, latency 0, IRQ 20

I/O ports at 40c0

00:1a.1 0c03: 8086:2835 (rev 03) (prog-if 00 [uHCI])

Subsystem: 106b:00a0

Flags: bus master, medium devsel, latency 0, IRQ 16

I/O ports at 40a0

00:1a.7 0c03: 8086:283a (rev 03) (prog-if 20 [EHCI])

Subsystem: 106b:00a0

Flags: bus master, medium devsel, latency 0, IRQ 19

Memory at 90704c00 (32-bit, non-prefetchable)

Capabilities: [50] Power Management version 2

Capabilities: [58] Debug port

00:1b.0 0403: 8086:284b (rev 03)

Subsystem: 106b:00a0

Flags: bus master, fast devsel, latency 0, IRQ 20

Memory at 90700000 (64-bit, non-prefetchable)

Capabilities: [50] Power Management version 2

Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-

Capabilities: [70] Express Unknown type IRQ 0

00:1c.0 0604: 8086:283f (rev 03) (prog-if 00 [Normal decode])

Flags: bus master, fast devsel, latency 0

Bus: primary=00, secondary=02, subordinate=02, sec-latency=0

Memory behind bridge: 90500000-905fffff

Capabilities: [40] Express Root Port (Slot+) IRQ 0

Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-

Capabilities: [90] Subsystem: 0000:0000

Capabilities: [a0] Power Management version 2

00:1c.3 0604: 8086:2845 (rev 03) (prog-if 00 [Normal decode])

Flags: bus master, fast devsel, latency 0

Bus: primary=00, secondary=03, subordinate=03, sec-latency=0

Memory behind bridge: 90400000-904fffff

Capabilities: [40] Express Root Port (Slot+) IRQ 0

Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-

Capabilities: [90] Subsystem: 0000:0000

Capabilities: [a0] Power Management version 2

00:1c.4 0604: 8086:2847 (rev 03) (prog-if 00 [Normal decode])

Flags: bus master, fast devsel, latency 0

Bus: primary=00, secondary=04, subordinate=04, sec-latency=0

Memory behind bridge: 90300000-903fffff

Prefetchable memory behind bridge: 0000000090000000-00000000900fffff

Capabilities: [40] Express Root Port (Slot+) IRQ 0

Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-

Capabilities: [90] Subsystem: 0000:0000

Capabilities: [a0] Power Management version 2

00:1c.5 0604: 8086:2849 (rev 03) (prog-if 00 [Normal decode])

Flags: bus master, fast devsel, latency 0

Bus: primary=00, secondary=05, subordinate=05, sec-latency=0

I/O behind bridge: 00002000-00002fff

Memory behind bridge: 90200000-902fffff

Prefetchable memory behind bridge: 0000000090800000-00000000908fffff

Capabilities: [40] Express Root Port (Slot+) IRQ 0

Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-

Capabilities: [90] Subsystem: 0000:0000

Capabilities: [a0] Power Management version 2

00:1d.0 0c03: 8086:2830 (rev 03) (prog-if 00 [uHCI])

Subsystem: 106b:00a0

Flags: bus master, medium devsel, latency 0, IRQ 16

I/O ports at 4080

00:1d.1 0c03: 8086:2831 (rev 03) (prog-if 00 [uHCI])

Subsystem: 106b:00a0

Flags: bus master, medium devsel, latency 0, IRQ 21

I/O ports at 4060

00:1d.2 0c03: 8086:2832 (rev 03) (prog-if 00 [uHCI])

Subsystem: 106b:00a0

Flags: bus master, medium devsel, latency 0, IRQ 19

I/O ports at 4040

00:1d.7 0c03: 8086:2836 (rev 03) (prog-if 20 [EHCI])

Subsystem: 106b:00a0

Flags: bus master, medium devsel, latency 0, IRQ 20

Memory at 90704800 (32-bit, non-prefetchable)

Capabilities: [50] Power Management version 2

Capabilities: [58] Debug port

00:1e.0 0604: 8086:2448 (rev f3) (prog-if 01 [subtractive decode])

Flags: bus master, fast devsel, latency 0

Bus: primary=00, secondary=06, subordinate=06, sec-latency=32

Memory behind bridge: 90100000-901fffff

Capabilities: [50] Subsystem: 0000:0000

00:1f.0 0601: 8086:2815 (rev 03)

Subsystem: 106b:00a0

Flags: bus master, medium devsel, latency 0

Capabilities: [e0] Vendor Specific Information

00:1f.1 0101: 8086:2850 (rev 03) (prog-if 8a [Master SecP PriP])

Subsystem: 106b:00a0

Flags: bus master, medium devsel, latency 0, IRQ 19

I/O ports at 01f0

I/O ports at 03f4

I/O ports at 0170

I/O ports at 0374

I/O ports at 40e0

00:1f.2 0101: 8086:2828 (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])

Subsystem: 106b:00a0

Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 21

I/O ports at 40f8

I/O ports at 4114

I/O ports at 40f0

I/O ports at 4110

I/O ports at 4020

I/O ports at 4000

Capabilities: [70] Power Management version 3

00:1f.3 0c05: 8086:283e (rev 03)

Subsystem: 106b:00a0

Flags: medium devsel, IRQ 10

Memory at 90705000 (32-bit, non-prefetchable)

I/O ports at efa0

01:00.0 0300: 1002:94c8 (prog-if 00 [VGA])

Subsystem: 106b:0084

Flags: bus master, fast devsel, latency 0, IRQ 11

Memory at 80000000 (64-bit, prefetchable)

Memory at 90620000 (64-bit, non-prefetchable)

I/O ports at 3000

Expansion ROM at 90600000 [disabled]

Capabilities: [50] Power Management version 3

Capabilities: [58] Express Legacy Endpoint IRQ 0

Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-

03:00.0 0c00: 11c1:5901 (rev 05) (prog-if 10 [OHCI])

Subsystem: 11c1:5900

Flags: bus master, fast devsel, latency 0, IRQ 17

Memory at 90400000 (64-bit, non-prefetchable)

Capabilities: [44] Power Management version 3

Capabilities: [4c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-

Capabilities: [60] Express Endpoint IRQ 0

04:00.0 0280: 14e4:4328 (rev 03)

Subsystem: 106b:0088

Flags: bus master, fast devsel, latency 0, IRQ 5

Memory at 90300000 (64-bit, non-prefetchable)

Memory at 90000000 (64-bit, prefetchable)

Capabilities: [40] Power Management version 2

Capabilities: [58] Vendor Specific Information

Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-

Capabilities: [d0] Express Endpoint IRQ 0

05:00.0 0200: 11ab:436a (rev 13)

Subsystem: 11ab:00ba

Flags: bus master, fast devsel, latency 0, IRQ 18

Memory at 90200000 (64-bit, non-prefetchable)

I/O ports at 2000

Expansion ROM at 90800000 [disabled]

Capabilities: [48] Power Management version 3

Capabilities: [50] Vital Product Data

Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-

Capabilities: [e0] Express Legacy Endpoint IRQ 0

**cat /proc/asound/version

**Advanced Linux Sound Architecture Driver Version 1.0.14.

**Compiled on Oct 12 2007 for kernel 2.6.22-14-generic (SMP).

cat /proc/asound/card0/codec#0

Codec: Realtek ALC885

Address: 0

Vendor Id: 0x10ec0885

Subsystem Id: 0x106b3000

Revision Id: 0x100103

Default PCM:

rates [0x560]: 44100 48000 96000 192000

bits [0xe]: 16 20 24

formats [0x1]: PCM

Default Amp-In caps: N/A

Default Amp-Out caps: N/A

Node 0x02 [Audio Output] wcaps 0x11: Stereo

PCM:

rates [0x560]: 44100 48000 96000 192000

bits [0xe]: 16 20 24

formats [0x1]: PCM

Node 0x03 [Audio Output] wcaps 0x11: Stereo

PCM:

rates [0x560]: 44100 48000 96000 192000

bits [0xe]: 16 20 24

formats [0x1]: PCM

Node 0x04 [Audio Output] wcaps 0x11: Stereo

PCM:

rates [0x560]: 44100 48000 96000 192000

bits [0xe]: 16 20 24

formats [0x1]: PCM

Node 0x05 [Audio Output] wcaps 0x11: Stereo

PCM:

rates [0x560]: 44100 48000 96000 192000

bits [0xe]: 16 20 24

formats [0x1]: PCM

Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital

PCM:

rates [0x5e0]: 44100 48000 88200 96000 192000

bits [0x1e]: 16 20 24 32

formats [0x1]: PCM

Node 0x07 [Audio Input] wcaps 0x10011b: Stereo Amp-In

Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1

Amp-In vals: [0x00 0x00]

PCM:

rates [0x560]: 44100 48000 96000 192000

bits [0xe]: 16 20 24

formats [0x1]: PCM

Connection: 1

0x24

Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In

Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1

Amp-In vals: [0x00 0x00]

PCM:

rates [0x560]: 44100 48000 96000 192000

bits [0xe]: 16 20 24

formats [0x1]: PCM

Connection: 1

0x23

Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In

Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1

Amp-In vals: [0x00 0x00]

PCM:

rates [0x560]: 44100 48000 96000 192000

bits [0xe]: 16 20 24

formats [0x1]: PCM

Connection: 1

0x22

Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital

PCM:

rates [0x560]: 44100 48000 96000 192000

bits [0x1e]: 16 20 24 32

formats [0x1]: PCM

Connection: 1

0x1f

Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In

Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1

Amp-In vals: [0x93 0x93] [0x00 0x00] [0x1b 0x1b] [0x00 0x00] [0x00 0x00] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97]

Connection: 10

0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17

Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-In vals: [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0

Amp-Out vals: [0x40 0x40]

Connection: 2

0x02 0x0b

Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-In vals: [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0

Amp-Out vals: [0x40 0x40]

Connection: 2

0x03 0x0b

Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-In vals: [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0

Amp-Out vals: [0x40 0x40]

Connection: 2

0x04 0x0b

Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-In vals: [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0

Amp-Out vals: [0x00 0x00]

Connection: 2

0x05 0x0b

Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono

Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x00 0x00]

Pincap 0x08373c: IN OUT HP Detect

Pin Default 0x90100140: [Fixed] Speaker at Int N/A

Conn = Unknown, Color = Unknown

Pin-ctls: 0x40: OUT

Connection: 5

0x0c* 0x0d 0x0e 0x0f 0x26

Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x00 0x00]

Pincap 0x08373c: IN OUT HP Detect

Pin Default 0x012b4050: [Jack] HP Out at Ext Rear

Conn = Comb, Color = Green

Pin-ctls: 0xc0: OUT HP

Connection: 5

0x0c* 0x0d 0x0e 0x0f 0x26

Node 0x16 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x00 0x00]

Pincap 0x083c: IN OUT HP Detect

Pin Default 0x90100141: [Fixed] Speaker at Int N/A

Conn = Unknown, Color = Unknown

Pin-ctls: 0x40: OUT

Connection: 5

0x0c 0x0d 0x0e* 0x0f 0x26

Node 0x17 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x80 0x80]

Pincap 0x083c: IN OUT HP Detect

Pin Default 0x400000f0: [N/A] Line Out at Ext N/A

Conn = Unknown, Color = Unknown

Pin-ctls: 0x20: IN

Connection: 5

0x0c 0x0d 0x0e 0x0f* 0x26

Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x80 0x80]

Pincap 0x08373c: IN OUT HP Detect

Pin Default 0x90a00110: [Fixed] Mic at Int N/A

Conn = Unknown, Color = Unknown

Pin-ctls: 0x24: IN

Connection: 5

0x0c* 0x0d 0x0e 0x0f 0x26

Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x80 0x80]

Pincap 0x08373c: IN OUT HP Detect

Pin Default 0x400000f0: [N/A] Line Out at Ext N/A

Conn = Unknown, Color = Unknown

Pin-ctls: 0x20: IN

Connection: 5

0x0c* 0x0d 0x0e 0x0f 0x26

Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x80 0x80]

Pincap 0x08373c: IN OUT HP Detect

Pin Default 0x018b3020: [Jack] Line In at Ext Rear

Conn = Comb, Color = Blue

Pin-ctls: 0x20: IN

Connection: 5

0x0c* 0x0d 0x0e 0x0f 0x26

Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0

Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-Out vals: [0x80 0x80]

Pincap 0x08373c: IN OUT HP Detect

Pin Default 0x400000f0: [N/A] Line Out at Ext N/A

Conn = Unknown, Color = Unknown

Pin-ctls: 0x20: IN

Connection: 5

0x0c* 0x0d 0x0e 0x0f 0x26

Node 0x1c [Pin Complex] wcaps 0x400001: Stereo

Pincap 0x0820: IN

Pin Default 0x400000f0: [N/A] Line Out at Ext N/A

Conn = Unknown, Color = Unknown

Pin-ctls: 0x20: IN

Node 0x1d [Pin Complex] wcaps 0x400000: Mono

Pincap 0x0820: IN

Pin Default 0x400000f0: [N/A] Line Out at Ext N/A

Conn = Unknown, Color = Unknown

Pin-ctls: 0x20: IN

Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital

Pincap 0x0810: OUT

Pin Default 0x014be060: [Jack] SPDIF Out at Ext Rear

Conn = Comb, Color = White

Pin-ctls: 0x40: OUT

Connection: 1

0x06

Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital

Pincap 0x0820: IN

Pin Default 0x01cbe030: [Jack] SPDIF In at Ext Rear

Conn = Comb, Color = White

Pin-ctls: 0x20: IN

Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono

Node 0x21 [Volume Knob Widget] wcaps 0x600080: Mono

Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In

Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]

Connection: 11

0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b

Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In

Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]

Connection: 11

0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b

Node 0x24 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In

Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]

Connection: 11

0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b

Node 0x25 [Audio Output] wcaps 0x11: Stereo

PCM:

rates [0x560]: 44100 48000 96000 192000

bits [0xe]: 16 20 24

formats [0x1]: PCM

Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out

Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1

Amp-In vals: [0x00 0x00] [0x00 0x00]

Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0

Amp-Out vals: [0x40 0x40]

Connection: 2

0x25 0x0b

**amixer

Simple mixer control 'Headphone',0

Capabilities: pvolume pswitch

Playback channels: Front Left - Front Right

Limits: Playback 0 - 64

Mono:

Front Left: Playback 64 [100%] [0.00dB] [on]

Front Right: Playback 64 [100%] [0.00dB] [on]

Simple mixer control 'PCM',0

Capabilities: pvolume

Playback channels: Front Left - Front Right

Limits: Playback 0 - 255

Mono:

Front Left: Playback 255 [100%] [0.00dB]

Front Right: Playback 255 [100%] [0.00dB]

Simple mixer control 'Front',0

Capabilities: pvolume pswitch

Playback channels: Front Left - Front Right

Limits: Playback 0 - 64

Mono:

Front Left: Playback 64 [100%] [0.00dB] [on]

Front Right: Playback 64 [100%] [0.00dB] [on]

Simple mixer control 'Surround',0

Capabilities: pvolume pswitch

Playback channels: Front Left - Front Right

Limits: Playback 0 - 64

Mono:

Front Left: Playback 64 [100%] [0.00dB] [on]

Front Right: Playback 64 [100%] [0.00dB] [on]

Simple mixer control 'Line',0

Capabilities: pvolume pswitch

Playback channels: Front Left - Front Right

Limits: Playback 0 - 31

Mono:

Front Left: Playback 27 [87%] [6.00dB] [on]

Front Right: Playback 27 [87%] [6.00dB] [on]

Simple mixer control 'Mic',0

Capabilities: pvolume pswitch

Playback channels: Front Left - Front Right

Limits: Playback 0 - 31

Mono:

Front Left: Playback 19 [61%] [-6.00dB] [off]

Front Right: Playback 19 [61%] [-6.00dB] [off]

Simple mixer control 'IEC958',0

Capabilities: pswitch pswitch-joined cswitch cswitch-joined

Playback channels: Mono

Capture channels: Mono

Mono: Playback [off] Capture [off]

Simple mixer control 'Capture',0

Capabilities: cvolume cswitch

Capture channels: Front Left - Front Right

Limits: Capture 0 - 46

Front Left: Capture 0 [0%] [-16.00dB] [on]

Front Right: Capture 0 [0%] [-16.00dB] [on]

Simple mixer control 'Capture',1

Capabilities: cvolume cswitch

Capture channels: Front Left - Front Right

Limits: Capture 0 - 46

Front Left: Capture 0 [0%] [-16.00dB] [on]

Front Right: Capture 0 [0%] [-16.00dB] [on]

Simple mixer control 'Capture',2

Capabilities: cvolume cswitch

Capture channels: Front Left - Front Right

Limits: Capture 0 - 46

Front Left: Capture 0 [0%] [-16.00dB] [on]

Front Right: Capture 0 [0%] [-16.00dB] [on]

Simple mixer control 'Input Source',0

Capabilities: enum

Items: 'Mic' 'Line'

Item0: 'Mic'

Simple mixer control 'Input Source',1

Capabilities: enum

Items: 'Mic' 'Line'

Item0: 'Mic'

Simple mixer control 'Input Source',2

Capabilities: enum

Items: 'Mic' 'Line'

Item0: 'Mic'

pds1974 · March 19, 2008

Hello! First I want to say Taruga you are the greatest for creating all this and I will be glad to make a donation if I can get My laptop working. I am new to this forum and new to Mac. I have never used a Mac before but I have a Dell XPS M1530 which I installed Leopard on using iATKOS v1.0ir2 and now I am trying to get my sound working so I downloaded AppleHDA Patcher v1.17 and I also have the Linux Codec for my Sigmatel 9228. I have tried several times to get the patcher going but have not been able to get it working mostly because I am sure I am doing something wrong. It seems that all the instructions on how to use AppleHDA Patcher are more gearded to someone that is familiar on how Mac's work. Taruga I have tried to follow your instructions but I think there are other steps that I am missing for example you say in step one to copy files to /System/Library/Extensions but when I unzip the AppleHDA Patcher file I get the Icon on the desktop and when I open that there is a Contents folder with many other sub folders so i have no idea what files you are talking about. If there are more detailed instructions that would be very helpful. Thank you in advance for any help you can give me.

macgirl · March 20, 2008

AppleHDA Patcher 1.17 does not work with your Laptop, download and install STAC9228_0x83847616.zip with kexthelper.

Mebster · March 20, 2008

Why is this thread called FAQ & RULES?

Makes it look like on of the Rules thread.

macgirl · March 20, 2008

Well this should be closed since posted, becaus rules are rules, and there are no discussions of them, also the FAQ.

Kangaroos · January 8, 2009

Knoppix don't work on my EP45-DS3LR (can't boot on SATA drive and don't detect sound card)

Ubuntu 8.10 work very well.

Nanael · January 29, 2009

appleHADPatcherv,20 sayes that my codec is unsupported... I have save with bbedit and the same... did you know why??

I'm on a toshiba satellite laptop.

thanks in advance.

Antaeus

conexant_ID_5045.txt

FAQ & RULES

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites