Asus P5W DH Deluxe thread for 10.5.x Leo - 10.9.x Mavericks

[bigpoppa206]

I tried to update to 10.5.7 via software update and separate download, but I get the "still waiting for root device" error

 

I did not change any of the kexts in the extra folder from 10.5.6 and these included ACHI kexts I required before.

 

Does anyone have any ideas, or a set of kexts that work with 10.5.7

Originally my system was from a Kalyway 10.5.2 install with updates.

 

thanks

 

Paul

 

Sounds like you aren't using the disabler.kext to bypass the AppleIntelCPUPowerManagement.kext

[aliab]

Hello

 

Retail install & update to 10.5.7

 

i do not recommend to use Chameleon-2.0-r431 with HDAEnabler

i have been back to old solution for Audio

see:

 

http://www.insanelymac.com/forum/index.php?showtopic=165071

[nicko_029]

Hello

 

Retail install & update to 10.5.7

 

i do not recommend to use Chameleon-2.0-r431 with HDAEnabler

i have been back to old solution for Audio

see:

 

http://www.insanelymac.com/forum/index.php?showtopic=165071

 

Thx, but can you translate that in english please

[bigpoppa206]

Thx, but can you translate that in english please

 

Translation through babelfish:

 

Here the new version of the file " Extra" for a install (Retail) in 10.5.7:

Contents; SMBIOSResolver.kext/infos system Sn dsmos.kext/one can l' to exchange by AppleDecrypt Disabler.kext/this version of Disabler inhibits from now on at the same time AppleHPET.kext (while waiting for better a soluce for FireWire) and AppleIntelCPUPowerManagement.kext IOAHCIBlockStorageInjector.kext/orange sata icon version of Chameleon-2.0 AHCIPortInjector.kext/infos system version of Chameleon-2.0 ATAPortInjector.kext/infos system version of Chameleon-2.0 Extensions.mkext to be used with Chameleon_v1012.pkg: Attached Spins P5WDHDeluxe.Chameleon_1.Extensions.mkext.zip (31.4K) off Number downloads: 23 EDICT: Chameleon-2.0-r431 does not function for l' moment with this d' type; installation Retail install on P5W DH Deluxe Pre necessary: A DVD Apple 10.5.x, a functional OSX (sufficient) on Mac or other, a disc formatted in GUID on a port sata or usb or FW etc. To assemble the DVD Apple and the disc coldly formatted on the desk then to open the terminal: Cd /Volumes/Mac \ OS \ X \ Install \ DVD/System/Installation/Packages/ open OSInstall.mpkg To select the disc targets then to personalize, remove the languages and the printers and to install (6 to 7 minutes) To make the update 10.5.7 combo To launch Chameleon_v1012.pkg on the target disc To deposit Extensions.mkext in the Extra file created previously by Chameleon For only modification on the system, it remains to publish com.apple. Boot.plist (Ethernet) with EFIStudio or the terminal (after the first boot) and d' to install the video one I recommend the " New universal Injector for ATI and nvidia, and multiple ATI cards enabler" of netkas which functions perfectly on my 7300GT, 8800GT and ATI 2600XT It n' is not necessary to repair the authorizations one can rebooter with F8 - v - F to view the sequence of boot About the configuration of the bios the necessary minimum is; Configuration IDE in AHCI and Carries out Sayable Function in Enabled (in any case, these 2 options are enough to have a functional system 100%) it is recommended d' to carry out its first boot with these minimal options then d' to adjust its adjustments perso thereafter in particular what relates to l' OC the disc of boot can be connected to the ports sata red or black or JMicron if l' option Controller mode is in AHCI thus qu" in RAID on the ports oranges with two similar hard drives. the bios is: P5W-DH-Deluxe-2801.ROM EDICT: Audio and update in 10.5.7; The version Realtek ALC882 Address 2: V4 BETA of Legacy AppleHDA for BOOT-132 causing a kernel Panic it is necessary to replace AppleHDA in the Extentions file while waiting for a revision. I returned to " l' obsolète" ALCInject.kext which functions perfectly here in attachment like AppleHDA.kext version 1.6.8 (10.5.7) patché (to be installed with Kext Helper but to also repair the authorizations with l' utility of disc) Attached Spins AUDIO_10.5.7_P5WDHDeluxe.zip (338.85K) off Number downloads: 31 L' another solution is d' to use VoodooHDA, but attention starting in verbose mode does not function with VoodooHDA.kext installed http://voodoohda.googlecode.com/files/VoodooHDA.kext.zip … What does not function or badly into 10.5.7 with this retail installation: Hot swap on a Sata port (functions on port eSata); the firewire turns at fallback speed (approximately 20 Mo/s) to note that all this functioned jusqu' perfectly; in 10.5.5 this chart which was really perfect l' is a little less currently what proves qu' as regards Hackintosh nothing n' is acquired with the liking of the updates …

[Derty]

possible reparation for hda enabler but not fuction for me.

 

 

For legacy HDA 10.5.7 to work.

 

HDAenabler needs edit in plisteditpro to work on 10.5.7

 

actual HDAenabler info.plist (open contents) says near end of file:

CODE <key>com.apple.kernel.iokit</key>

<string>6.9.9</string>

 

need to say:

CODE <key>com.apple.kernel.iokit</key>

<string>7.9.9</string>

 

ideas????

[kdp]

hello, i've been using my p5wdh for a while now, and i was just wondering if there was an extensions.mkext floating around or a good solid way to have EVERYTHING working yet without ever having to fix a driver again, like the alc882, i have to reinstall it with every update, and the original mkext for this board posted by macita doesn't have hpet disabler and DOES include nvinject which will totally stop your nvidia card from getting qe/ci, so what i would like to know is this:

is there a boot cd or mkext that keeps audio enabled, disables hpet and doesn't include anything for nvidia (use efi fix) , i also can't seem to get the retail disc to boot my 9800 card, if i swap cards its boots the disc just fine, anyone can help?

[bigpoppa206]

hello, i've been using my p5wdh for a while now, and i was just wondering if there was an extensions.mkext floating around or a good solid way to have EVERYTHING working yet without ever having to fix a driver again, like the alc882, i have to reinstall it with every update, and the original mkext for this board posted by macita doesn't have hpet disabler and DOES include nvinject which will totally stop your nvidia card from getting qe/ci, so what i would like to know is this:

is there a boot cd or mkext that keeps audio enabled, disables hpet and doesn't include anything for nvidia (use efi fix) , i also can't seem to get the retail disc to boot my 9800 card, if i swap cards its boots the disc just fine, anyone can help?

 

Sounds like you are not using the Chameleon 2.0 bootloader. Redo the hard drive from the ground up, reinstall OSX and then install the bootloader. All your changes, necessary kexts, EFI strings, etc, go in the Extras folder and you leave the original install clean and untouched. Should survive any updates from Apple and not break things.

 

Why do you want to disable HPET? PS I never use injectors, but YMMV.

[kdp]

Sounds like you are not using the Chameleon 2.0 bootloader. Redo the hard drive from the ground up, reinstall OSX and then install the bootloader. All your changes, necessary kexts, EFI strings, etc, go in the Extras folder and you leave the original install clean and untouched. Should survive any updates from Apple and not break things.

 

Why do you want to disable HPET? PS I never use injectors, but YMMV.

 

i am using the bootloader, i'm aware that you put the kexts in the extras folder, otherwise this wouldn't be working at all, but what i'm asking is, is there a way to make the onboard sound not disable with every update, i am unaware of a method of getting the alc882 to work with a kext in the extras folder, and the macita mkext has injectors built into it, i was just asking if anyone had made one with them out.

[bigpoppa206]

i am using the bootloader, i'm aware that you put the kexts in the extras folder, otherwise this wouldn't be working at all, but what i'm asking is, is there a way to make the onboard sound not disable with every update, i am unaware of a method of getting the alc882 to work with a kext in the extras folder, and the macita mkext has injectors built into it, i was just asking if anyone had made one with them out.

 

Oh now I see, what you need are the modified audio kexts to place in the extras folder that would survive an update. Let me dig around and see if I still have those as I switched to a Gigabyte board a while back.

[nutshell]

thats is my mkext for p5w dh with 10.5.7 for boot 132+retail, not ps2 support.

 

efi v9, only use pcwiz uinstaller for put efi+base system. if you like, chameleon 2 rc1-431 good too, but install after efi+base system.

 

run uinstaller

http://######.com/downloads/UInstaller_1.2.zip

 

select your hd leopard

 

set native resolution: your monitor resolution

 

install efi 9

 

apply ethernet efi

 

video efi string, select your video card.

 

ok install.

 

finaly

 

put in root extra/ "extensions.mkext"

 

only 10.5.7 need replace applehda for 10.5.6 kext, replace and repair permissons

 

download applehda here:

http://www.insanelymac.com/forum/index.php...st&id=49728

 

ok restart.

 

attach kext whith ps2 support revised.

 

guys, I've been using my P5-W based OSX machine for a long while. I started with Leo4all v3 and upgraded from 10.5.2 to 10.5.5 by carefully reading many many many posts here and elsewhere. It's time to upgrade to 10.5.7 and I'm getting confused with the discussion here. I don't fully understand all this stuff and made it this far by simply following instructions cobbled together from many sources -- there was much trial and error too. What's the easiest way to proceed? I'd use the instructions quoted here, but I have no idea if I meet the requirements in the first sentence. I didn't use retail (used leo4all v3 to start) and I don't know if I'm boot132 or now.

 

So my question is...how to I proceed? I'm uploading the instructions I used to get to 10.5.5. Can I simply re-do this for 10.5.7, are there additional steps, are some of my current steps out of date (I'm getting that impression from this discussion). I'm happy to be sent to other posts if the answer is there, but I honestly would appreciate a simply set of steps like the ones quoted here.

 

I appreciate it...I know it sucks having to constantly answer the same newbie questions.

My_Leo4all_OSX_update_process_v4.rtf

[Derty]

the function of boot 132 is use real osx disc installing.

 

efi 9 or chamaleon 2rc1 is create a sub extra folder for put yours kext and not touch original installation. "sorry for my english".

 

normally have the opportunity to update without problems, in 10.5.7 only replace applehda.kext for 10.5.6, i dont like this, but so far there is no other solution, or aliab idea, reinstall old audio kext.

[bigpoppa206]

I appreciate it...I know it sucks having to constantly answer the same newbie questions.

 

We were all noobs once. The EASIEST way seems to be just booting off of an existing install that works, format a second drive, install 10.5.6 (which is the retail disk now), install Chameleon so that it boots and then add whatever kexts you need to make your system work in the Extras/Extensions folder and make this new drive your first bootable drive in your system. Then upgrade to 10.5.7 and don't forget to save whatever working AppleHDA kexts you have that are working because you'll need them again. This method leaves the original installation completely untouched.

 

If you have never used PCWiz's installer program, try it out, works great.

[macita]

Any snow success boot?

[jricks92]

^^I was able to boot snow leo 10A354 in 32-bit mode. 64-bit did not work. also i did not have qe/ci on my graphics and sound drivers did not work.

 

i tried to boot 10A380 but i got a kernel panic right off the bat.

[Derty]

I be boot perfectly snow 380 and upgrade 394.

 

not use chameleon and efi 10 dont work.

 

use efi 9, dsdt, and first boot create for netkas "60 kb".

 

only with -f.... but all works.

 

snow run correctly now.... "402"

 

i be works in bios parched complet with dsdt......

 

 

 

edit: no more flags. now run retail perfect. im wait alc882 taruga 64bits....

[stifflers]

hi folks,

 

i am completely new with mac. so, what i need is really a step by step instruction to install mac osx on a new, clean harddisk. i am a bit confused, because in this thread you seem to have already a system running, ontop you put osx?!? i am running an p5w dh deluxe too... so you guys know best what to do.

can someone please point me to the most important things to do an install? in some short headwords?

its much appreciated!

 

thanks a lot in advance

[avian]

Hey guys, with those needing to delete AppleHPET to get full speed usb etc - have any of you tried mucking around with their DSDT to find an alternate solution?

 

Tried creating a new DST using the --newhpet option or similar in the patcher your using? Can you keep AppleHPET.kext in then? Anyone looking through their DST code to remove multiple APIC methods? (I saw this on another thread with an AMI bios, this was his solution to fixing HPET properly)?

 

 

Also with those that want to swap kext's less between version upgrades, try using voodoohda for sound, works fine between 10.5.x versions, and even works fine in snow leopard (if your really concerned about not needing to change kexts in the future hehe).

[Sereno]

I be boot perfectly snow 380 and upgrade 394.

 

not use chameleon and efi 10 dont work.

 

use efi 9, dsdt, and first boot create for netkas "60 kb".

 

only with -f.... but all works.

 

snow is a bit unstable, sometime kernel panic for unzip file, or preview image.... but normaly run correctly.

 

i be works in bios parched complet with dsdt......

 

please post your Extensions.mkext or all kexts used

[Derty]

is not possible in insanely sereno i send you a PM.

 

sound for snow for alc883, someone can repair for 882???

 

works from netkas and taruga

ALC883_SnowLeopard.zip

[marliwahoo]

please post your Extensions.mkext or all kexts used

 

To get it to work you don't need much. Dsmos for Snow Leopard (not the same as dsmos for Leopard) and remove AppleIntelCPUPowerManagement.kext or have it disabled with NullCPUPowerManagement.kext. It will boot fine with just that. Boot first in x32, then use kext utility and then x64 should work. Oh ya, Chameleon2 with efi v10 or is a must.

 

It is better to use x64 kexts because they will work in both x32 and x64. I recommend you find these x64 kexts (they must be the "special recompiled" x64 versions:

 

NullCPUPowerManagement.kext

dsmos.kext

VoodooHDA.kext

JMicronATA.kext

 

Here's some stuff: http://www.mediafire.com/?sharekey=7d252c6...2db6fb9a8902bda

[Derty]

kext...64...

Archivo_comprimido.zip

[jricks92]

Hey all, i finallly got Snow Leopard 10A411 working!

well at least in 32-bit mode. When i boot up in 64-bit, it says "Waiting for DSMOS.." For some reason it doesn't load dsmos.kext and Disabler.kext. Is this due to the fact that in my Extra folder i have them in an Extensions.mkext?

 

hmm i'll try it without the mkext and see what happens. And yes, i have the 64-bit dsmos.kext.

 

 

 

 

EDIT: Got 64-bit working! sooo much faster in finder, etc.!

[marliwahoo]

Do not update to 10a421. The decryption has changed. It needs a new dsmos.

[Derty]

see netkas blog snow 421.

 

http://netkas.org/?p=121

 

if you change original files return before install new decr

 

http://heliacal.net/~solar/mac/original_10A421.tar

 

repair mkext kextcache

 

sudo -s

 

pass....

 

sudo kextcache -v 1 -t -l -m /System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext /System/Library/Extensions

[Wing123]

Greetings, all:

 

Recently I upgraded my fully working 10.5.6 outfit to 10.5.7 using patches found on this site and at www.mystiquemac.com.

 

All went well, and everything was back up after a few common tweaks except for a persistent problem with audio input. HD Audio Output is recognized, but nothing at all is picked up for audio input. My 10.5.6 install recognized an internal microphone, and line-in on my mbo and output for internal speakers, headphones, line out and digital out. Now, only HD Audio Output is available and nothing else.

 

I've been up and down this forum and others looking for a fix. Any help on this would be appreciated. Others seem to have issues getting audio output, and there are some fixes out there for that. The problem of audio input doesn't seem to be addressed anywhere... at least not that I can find.

 

Thanks in advance for pointing me in the right direction.