denisstroru1 Posted January 29, 2010 Share Posted January 29, 2010 Ok so far I tried reading all 14 pages of this thread but can't find any perfect solution for my display. This is my first attempt of getting OSX running on PC. Here are my display specs and I hope someone can help me to find correct procedure to get my display working properly.Currently Installed Leo4AllV3 (10.5.2). So far I am able to boot up. Got my USB wireless working. But still working on rest of the stuff step by step. So here is my display configuration on laptop under system profler. Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: ATI (0x1002) Device ID: 0x9581 Revision ID: 0x0000 Kernel Extension Info: No Kext Loaded Displays: Display: Resolution: 1024 x 768 Depth: 32-bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported According Gateway my display is ATI Mobility Radeon™ HD 2600 XT PCI Express Graphics 512 MB GDDR3 Dedicated Memory with 1280 x 800. I will really appreciate if someone can point me or suggest me what need to get proper resolution on my laptop. Thanks in advance -AJ у меня нокаяже карта как ее завести ид 9581 Link to comment Share on other sites More sharing options...
denisstroru1 Posted January 30, 2010 Share Posted January 30, 2010 у меня токаяже карта как ее завести ид 9581 Link to comment Share on other sites More sharing options...
RitoN Posted March 5, 2010 Share Posted March 5, 2010 I have Quartz Extreme Issue with my ATI Radeon 2600 HD PRO PCI-E after 10.5.7 update (QE not supported now).Can anybody help me? use iDeneb 10.5.8. It's perfectly working for my radeon 2600 XT PCI-e Link to comment Share on other sites More sharing options...
hardcore89 Posted April 12, 2010 Share Posted April 12, 2010 did the mobility radeon hd2600xt now working? Link to comment Share on other sites More sharing options...
calindesired Posted June 1, 2010 Share Posted June 1, 2010 I HAVE ATI HD MOBILITY 2600 512 MB an everything's working just fine it was hard but I did it Link to comment Share on other sites More sharing options...
Neolo Posted June 1, 2010 Share Posted June 1, 2010 calindesired And what you did? Simple native resolution? I already did this few monts ago. Where is QE? Link to comment Share on other sites More sharing options...
HomdfK Posted June 27, 2010 Share Posted June 27, 2010 Hi, I have 10.5.6 and a ATI HD2600 XT device 0x9588. Everything works perfeect with my Eizo at resolution 1920x1200. The display is connected via DVI. I've just tried to install my Final Cut on the hackintosg aswell but it says that there's no VRAM and no QE supported. System-Profiler displays 512 MB VRAM. Below the section "display" there's listed my EITO and the point QE says not supported. How can I turn QE on?? Link to comment Share on other sites More sharing options...
kocoman Posted October 21, 2010 Share Posted October 21, 2010 For anyone with a ATI Radeon HD 2600 with AGP Device id 9587 i fixed it for anyone with agp Download Use Kext Helper to install the kexts You still need to download the natit from IRC #RadeonHD ..The first link in the topic Also report back if Dual DVI works should work fine i just need confirmed report of it Does anyone still have this file? I tried the one at http://www.insanelymac.com/forum/index.php?showtopic=107526 but it only gives me a black screen with live mouse cursor. Link to comment Share on other sites More sharing options...
Recommended Posts