BlackCH Posted June 14, 2009 Share Posted June 14, 2009 Its a specific version of PCEFI...I uploaded a snow leopard pack here: http://www.mediafire.com/blackchxxx Link to comment Share on other sites More sharing options...
Hassan Rai Posted June 14, 2009 Share Posted June 14, 2009 Great work BlackCH! You people are really helping to take this forward! I would just like to report that my 10.5.7 retail is working flawlessly. Not a single KP so far (touch wood)! I'm looking forward to Nvidia GTX-285... i intend to buy the Windows (regular) version and use it in my Hackintosh build. I haven't seen any working guides for it thus far. I hope by the time Snow Leopard is released properly there will be a new guide from you guys that us noobs can follow! Cheers! Link to comment Share on other sites More sharing options...
BlackCH Posted June 14, 2009 Share Posted June 14, 2009 Great work BlackCH! You people are really helping to take this forward! I would just like to report that my 10.5.7 retail is working flawlessly. Not a single KP so far (touch wood)! I'm looking forward to Nvidia GTX-285... i intend to buy the Windows (regular) version and use it in my Hackintosh build. I haven't seen any working guides for it thus far. I hope by the time Snow Leopard is released properly there will be a new guide from you guys that us noobs can follow! Cheers! http://netkas.org/?p=109 Link to comment Share on other sites More sharing options...
Hassan Rai Posted June 15, 2009 Share Posted June 15, 2009 Thanks BlackCH... i have looked at that thread. I have a questions; Currently I'm running my 7800GTX using a string (as opposed to drivers or injectors). Is the string method more stable than the driver method??(considering that i'm running retail and i used to have KPs earlier when i was not on retail and using nvinject).?? Also it sems like DVI ports are not working for most users on Nvidia 200 series without using DVI to VGA converters... that's a big no no for me. I'm just trying to check everything before i go ahead and buy an expensive card... i might even go for the GTX 260, i expect it will be a HUGE improvement on my current card. Link to comment Share on other sites More sharing options...
sipov Posted June 15, 2009 Share Posted June 15, 2009 Hi! At me it is frequent kernel panic at various times. It can be in consequence weak a power unit? My 350w I use Extensions.mkext Post #394 Link to comment Share on other sites More sharing options...
bikinifarm Posted June 15, 2009 Share Posted June 15, 2009 Its a specific version of PCEFI...I uploaded a snow leopard pack here: http://www.mediafire.com/blackchxxx Great thanks. I did get it to boot and work fine. I have not spent much time with audio, as I have an external USB audio device that I can use for the moment. Do not have the folder / drive issue, so far. Haven't tested sleep, but everything else seems to work fine. Based on the activity monitor, most of the processes are running in 64 bit mode. Thanks dude... Link to comment Share on other sites More sharing options...
omv Posted June 16, 2009 Share Posted June 16, 2009 ...Also it sems like DVI ports are not working for most users on Nvidia 200 series without using DVI to VGA converters... that's a big no no for me. ... People were having DVI problems with the 200 series?? I'm running an older GTX 260 without any problems. There did seem to be problems with dual-DVI, but I believe netkas's latest injector solved that, as I'm now able to run a dual-link + single-link display simultaneous which didn't work before. Only reason I went with ATY_Inject was lack of information on how to make an EFI string for the GTX2xx when the drivers were released -- but the system seems pretty well behaved - no KP's, and at this point I'd rather not break things. Link to comment Share on other sites More sharing options...
BlackCH Posted June 16, 2009 Share Posted June 16, 2009 I have not spent much time with audio, as I have an external USB audio device that I can use for the moment. I made some new legacyHDA kexts I uploaded a few post ago. those should give you the same functionality as stickpin's ones do under 10.5 Link to comment Share on other sites More sharing options...
bikinifarm Posted June 17, 2009 Share Posted June 17, 2009 I made some new legacyHDA kexts I uploaded a few post ago. those should give you the same functionality as stickpin's ones do under 10.5 Thanks, much appreciated. Snow Leopard audio does work now using the kexts you provided. I had to re-loop once to figure out the difference between the LegacyAppleHDAHardwareConfigDriver.kext s in ALC883_LegacyHDA_SnowLeopard vs. P5k-VM_SnowLeopard. The verdict is that the one in P5k-VM_SnowLeopard works. The other one does not. (No, they are not the same.) I do have the same sleep issue. But I am not too worried about it. If you ever figure it out, lemme know. Thanks. Link to comment Share on other sites More sharing options...
BlackCH Posted June 17, 2009 Share Posted June 17, 2009 Thanks, much appreciated. Snow Leopard audio does work now using the kexts you provided. I had to re-loop once to figure out the difference between the LegacyAppleHDAHardwareConfigDriver.kext s in ALC883_LegacyHDA_SnowLeopard vs. P5k-VM_SnowLeopard. The verdict is that the one in P5k-VM_SnowLeopard works. The other one does not. (No, they are not the same.) My mistake; I might have mixed up the files Link to comment Share on other sites More sharing options...
Hassan Rai Posted July 10, 2009 Share Posted July 10, 2009 Guys, based on your help I have a retail install of 10.5.7 running flawlessly since my last post. No kernel panics thus far etc. What I did was that I installed this on a 120GB 'test' hard drive. Now I would like to clone this install to a new 500GB hard drive (i do not want to repeat the whole process again). How can I clone this? can someone please give me some pointers? Carbon Copy Cloner? and then what? Thanks! Link to comment Share on other sites More sharing options...
colean Posted July 13, 2009 Share Posted July 13, 2009 Hi guys, today i decided to put a iATKOSv7 on my Asus P5K-VM G33 Barbone. after some trouble with the Marvell Yukon Lan-Driver i still have nearly everything nicely setup and working stable. But, one really needed thing isnt working. The Displaydriver. :-( With the integrated GMA X3100 there is only VESA (1024x768) avalible. I also have a Ati Radeon HD4550, but there is the same problem - no matching drivers. I was searching for hours thru the internet to find a solution for the problem, and at least i landet here. It seems that there is no chance to bring the intel oder ati card to work, so i am willing to buy a new grafikcard. Can someone let me know what would be the best buy for me - i need a "low profile" for my barebone! Maybe there is a good buy around 50-80 Euro? best regards, colean Link to comment Share on other sites More sharing options...
leo333 Posted July 13, 2009 Share Posted July 13, 2009 It seems that there is no chance to bring the intel oder ati card to work, so i am willing to buy a new grafikcard. Can someone let me know what would be the best buy for me - i need a "low profile" for my barebone! Maybe there is a good buy around 50-80 Euro? If you really just need a nice resolution image on your screen, you could go my route and buy a cheap nVidia 7xxx card. You can get the lower range 7200 and 7300 passively cooled (no noise) and low profile for 30€ (new!) these days. If you want to go a bit higher, there are the 8xxx and 9xxx cards. Any is ok I think, except for a few that don't work. The ones in the genuine Macs (8600 I believe) are usually a good choice. I don't know about price or low-profile avaiability with those models, the last time I bought a graphics card was last year when I got my P5K-VM and was as surprised as you to find the graphics didn't work. I went the cheapo route, got a used 7900 from a friend for 35 Hope that helped a bit, Leon Link to comment Share on other sites More sharing options...
flux88 Posted July 14, 2009 Share Posted July 14, 2009 Hello everyone, In summary, I installed a like retail as follows: 1. Download XxX_x86_10.5.6_Install_Disc_Universal_Final.v2 and burn DVD. 2. Download on USB drive Chameleon 2 RC1, kexts of bikinifarm (post #364, thank you for your work) and the 10.5.7 update 3. For my installation, I need ViaRhine.kext because my onboard network card does not work (lost connection) I installed a D-Link network card. 4. Install Mac OS X 10.5.6 from XxX_x86_10.5.6_Install_Disc_Universal_Final.v2 DVD. Just install the Essential System Software and X11, nothing else, on GUID disk. 5. Before final install reboot, make a backup of AppleHDA.kext on the USB drive. Install, from a terminal, Chameleon 2 RC1, kexts from bikinifarm (/Extra on EFI partition), 10.5.7 update and ViaRhine.kext. 6. Reboot. 7. Once Leopard is functional (in one shot!), I changed the IOUSBFamily.kext (post #416), move /System/ Library/Extensions/ViaRhine.kext on the Desktop/tmp/ unpacked the Extensions.mkext of bikinifarm on Desktop/tmp/ add VoodooUSBEHCI.kext in /Desktop/tmp and recreate Extensions.mkekts with MKext Tool. Move Extensions.mkext in /Extra folder on the EFI partition. 8. Crate smbios file into the /Extra folder on EFI partition. 9. Create EFI String (EFI Studio) and add it to /Extra/Boot.plist file on EFI partition. 10. In a terminal, chmod-R 755 /Extra and /System/Library/Extensions 11. In a terminal, chown-R root: wheel /Extra and /System/ Library/Extensions Like BlackCH, I have sleep-restart issue. Another issue for me, I use a aggregate audio device for my 5.1 speaker. I am unable to change the volume from leopard. Voilà When the how-to will be done (change the video card and add an extra network card), I'm interested. Thank you for your work. That's very helpful. Thank you. How can I get the sleep-restart and audio problems solved nice and simply? This is the first day I've explored running OSX and havent even booted the DVD. I was first going with iPC now I'm downloading the xxx 10.5.6. So many guides out there saying different things! Hope this isnt going to be a headache. Link to comment Share on other sites More sharing options...
colean Posted July 21, 2009 Share Posted July 21, 2009 now i use a nv 9600gt and everything worked fine. the only thing where i cant find a solution is the sleep mode. if anyone fixed that, please post! Link to comment Share on other sites More sharing options...
popophobia Posted July 27, 2009 Share Posted July 27, 2009 Just want to check, does anyone have problem enabling both wifi card (PCI) and ethernet at the same time? I'm using EFI method on vanilla (a few page back). If I boot normally, ethernet works but not wifi. If I boot with flag -f, wifi works, but not ethernet. Any idea why? The card is Asus WL-138g V2, supposedly working OOB (it does, when I boot with flag -f). Thanks guys. Link to comment Share on other sites More sharing options...
popophobia Posted July 27, 2009 Share Posted July 27, 2009 found the culprit. I was using the old IONetworkingFamily in EFI Extra folder. Updated to the new one and everything is smooth again. Link to comment Share on other sites More sharing options...
Jagull Posted July 29, 2009 Share Posted July 29, 2009 is there a guide on how to update this? I cant seem to get past 10.5.5 I've done a retail install via the boot-132 Link to comment Share on other sites More sharing options...
bikinifarm Posted July 31, 2009 Share Posted July 31, 2009 @BlackCH I updated to the latest Snow Leopard update that came through the System Update, and it hangs at boot time with: acpi smc platform plugin timeout. Was running fine before the update. I am still using the kexts you provided in this forum a while back. Any ideas? Thanks. Link to comment Share on other sites More sharing options...
omv Posted August 6, 2009 Share Posted August 6, 2009 Just tried a 10.5.8 update. Audio broke (crash upon bootup), though swapping to my saved 10.5.6 AppleHDA.kext seems to work. However, my network adapter seems to be *gone* now. Anyone got any suggestions on this part? Link to comment Share on other sites More sharing options...
popophobia Posted August 7, 2009 Share Posted August 7, 2009 If your network adapter is gone, try to copy the network adapter kext (IONetworkingFamily.kext) from S/L/E to /E/E folder (assuming you're doing retail installation and made a back-up of this file). If that doesn't work, do the opposite (you'd want to have the latest working driver) I haven't pull the trigger yet, if it's aint broke.... Link to comment Share on other sites More sharing options...
omv Posted August 7, 2009 Share Posted August 7, 2009 Oddlly enough, the network adapter came back on next boot. Unfortunately, sleep looks busted again (might be IOUSBFamily again - going to try reverting that) Link to comment Share on other sites More sharing options...
BlackCH Posted August 8, 2009 Share Posted August 8, 2009 @BlackCH I updated to the latest Snow Leopard update that came through the System Update, and it hangs at boot time with: acpi smc platform plugin timeout. Was running fine before the update. I am still using the kexts you provided in this forum a while back. Any ideas? Thanks. I havent updated my SL install... but I heard theres problems with the old decryption kexts. You need a new one. See netkas.org for more info EDIT: I updated it and I get the same error as you have. I removed old dsmos/appledecrypt kexts and installed the new decrypter pkg from netkas before restart (but I dont know if is working as it should).... Right now I dont have time to track it down.... Just tried a 10.5.8 update. Audio broke (crash upon bootup), though swapping to my saved 10.5.6 AppleHDA.kext seems to work. However, my network adapter seems to be *gone* now. Anyone got any suggestions on this part? Guys/girls, here are new Legacy audio kexts to work with the new AppleHDA.kext from 10.5.8 (version 1.7.1 , I think). I've also included the stock HDA.kext in case you replaced it. In that case put AppleHDA.kext onto yout /S/L/Extensions folder, repair permissions. The Legacy...kexts goes into /Extra/Extensions.mkext LegacyHDA1058.zip For network you have to edit the plist on IONetworkingFamily.kext/Contents/PlugIns/AppleYukon2.kext/Contents/Info.Plist with the right values (is what I do) or use your old patched kext Link to comment Share on other sites More sharing options...
dudu_qc Posted August 9, 2009 Share Posted August 9, 2009 Guys/girls, here are new Legacy audio kexts to work with the new AppleHDA.kext from 10.5.8 (version 1.7.1 , I think). I've also included the stock HDA.kext in case you replaced it. In that case put AppleHDA.kext onto yout /S/L/Extensions folder, repair permissions.The Legacy...kexts goes into /Extra/Extensions.mkext LegacyHDA1058.zip For network you have to edit the plist on IONetworkingFamily.kext/Contents/PlugIns/AppleYukon2.kext/Contents/Info.Plist with the right values (is what I do) or use your old patched kext Thanks for your kext and help. Link to comment Share on other sites More sharing options...
popophobia Posted August 24, 2009 Share Posted August 24, 2009 Is it just me or everyone is waiting for a guide to install 10.6 onto this board? If it's just me, please, someone post a guide Thanks Link to comment Share on other sites More sharing options...
Recommended Posts