Bronya Posted August 4, 2008 Author Share Posted August 4, 2008 So I installed AGPGart 2.7.1 (the latest) and my card is recognized as AGP as expected.Unfortunatly I can't get my Powercolor X1950PRO 256MB AGP dual DVI (7280 1002, revision 009a) to work properly and I don't know what to do. If I install the latest package from you Bronya 10.5.3(9D34), it boots up but then I'm left with a blue screen, I can see the mouse and move it around but no desktop. In order to get the desktop, if I press the power button of my computer, and then back on, I get the desktop but the screen is locked up and I can't interact with the desktop. I've tried many combinations, using previous versions of your drivers, using jccools drivers gives me control over the desktop, but no QE Can you help? From jccools work control over the desktop , ok . You no tried my ATINDRV.kext ? If you use my ATINDRV.kext , then should work QE/CI ))) Link to comment Share on other sites More sharing options...
MTZeon Posted August 4, 2008 Share Posted August 4, 2008 From jccools work control over the desktop , ok . You no tried my ATINDRV.kext ? If you use my ATINDRV.kext , then should work QE/CI ))) Well, it booted fine, but still no QE/CI. I'll try to remove AGPGart and see what happens. EDIT: nothing changed I don't get it... Link to comment Share on other sites More sharing options...
Bronya Posted August 4, 2008 Author Share Posted August 4, 2008 Well, it booted fine, but still no QE/CI. I'll try to remove AGPGart and see what happens. EDIT: nothing changed I don't get it... Probably that at you not the native: You should have original kext's from original dvd : 1)OpenGL.frameworks 2)ATIRNDRV.kext or ATINDRV.kext 3)ATIRadeonX1000.kext 4)ATIRadeonX1000GA.plugin 5)ATIRadeonX1000GLDriver.bundle 6)ATIRadeonX1000VADriver.bundle 7)IONDRVSupport.kext 8)IOGraphicsFamily.kext !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! You no should skip the it kext . P.S. If you delete natit.kext , then work qe/ci ???? Link to comment Share on other sites More sharing options...
MTZeon Posted August 5, 2008 Share Posted August 5, 2008 Probably that at you not the native:You should have original kext's from original dvd : 1)OpenGL.frameworks 2)ATIRNDRV.kext or ATINDRV.kext 3)ATIRadeonX1000.kext 4)ATIRadeonX1000GA.plugin 5)ATIRadeonX1000GLDriver.bundle 6)ATIRadeonX1000VADriver.bundle 7)IONDRVSupport.kext 8)IOGraphicsFamily.kext !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! You no should skip the it kext . P.S. If you delete natit.kext , then work qe/ci ???? Hum... i no longer have the original kext's since I removed them... Can you provide a package already built for AGP devices? Please Link to comment Share on other sites More sharing options...
hexxa Posted August 6, 2008 Share Posted August 6, 2008 What drivers are safe and stable to "Sapphire ati radeon X1950 pro" 0x7280? i think i sould install iatkos v4 10.5.4 to my computer what kernel sould i choose to get it stable with my ati card. i have try a lot of drivers and 1-2 have workt but they say "connect the cable to the card" when its in . Its work with Kalayway 10.5.2 sould i upgrade to 5.4 =/? Link to comment Share on other sites More sharing options...
Peter R. Posted August 7, 2008 Share Posted August 7, 2008 Bronya's 7280 drv installs fine on my Leo4AllV3 10.5.2 but NOT in iATKOSv4i. Peter R. Link to comment Share on other sites More sharing options...
themax Posted August 10, 2008 Share Posted August 10, 2008 Hi I installed this in 10.5.4 and all go fine, QE/CI, etc...but in games i get low fps p.ex: doom 3 or Wolfenstein ¿is this normal? This is a screen of the graphics setup, the ID Revision is 0x0000 ¿is all ok? Sorry for me bad english. Link to comment Share on other sites More sharing options...
Paul Gleeson Posted August 12, 2008 Share Posted August 12, 2008 I have an ATIx1950XT card running great on a dual screen extended dekstop (1680x1050 and 1280x1024) Only problem is the fan running at full speed all the time. Is there a fix for this? I used the Kalyway 10.5.2 driver on the install DVD, and upgraded to 10.5.3 using the combo update. Thanks Paul Asus P5W-DH Dual Core 2.4Ghz 2 GB DDR2 ATIx1950XT dual screen dual boot using ICH7R - XP running on intel matrix raid (2 x 250mb) - OSX running on non-raid SATA disk (1 x 250mb) ATI Radeon X1900 XT: Chipset Model: ATY,RadeonX1900 Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 512 MB Vendor: ATI (0x1002) Device ID: 0x7240 Revision ID: 0x0000 ROM Revision: ATYinject X1900 0.0.1 Displays: DELL E207WFP: Resolution: 1680 x 1050 @ 60 Hz Depth: 32-bit Color Core Image: Hardware Accelerated Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported Rotation: Supported L1710B: Resolution: 1280 x 1024 @ 60 Hz Depth: 32-bit Color Core Image: Hardware Accelerated Mirror: Off Online: Yes Quartz Extreme: Supported Rotation: Supported Link to comment Share on other sites More sharing options...
hikky Posted August 14, 2008 Share Posted August 14, 2008 I have an ATIx1950XT card running great on a dual screen extended dekstop (1680x1050 and 1280x1024) Only problem is the fan running at full speed all the time. Is there a fix for this? Take a look @ Bronyas first post: If fan noisy , download http://forum.insanelymac.com/index.php?act...st&id=18822 Should solve you problem and now my problem: I tried to get my Sapphire X1950 Pro 512MB AGP 7280 working with this, and combined with the Jcool methode and so on. I used the Lawless 10.5.4 AMD install but I got bluescreens, bluescreens with ATI power cord message, kernel panics and so on But there are a few 1950Pro 512 AGP owners with working setups out there.. so PLS can anyone tell me exactly how you got your cards working? THX Link to comment Share on other sites More sharing options...
raulb Posted August 14, 2008 Share Posted August 14, 2008 Hey Bronya, I have been out of the OSX86 thing for some time, The last time I checked this thread was 10.5.1 driver. It was 38 pages and you said you are retiring from driver. Was sad reading that because without you no good drivers and QI/CI for 1950 folks. Good to see you still here and supporting this driver. Good stuff. Just updated 10.5.4 and installed your driver for 10.5.3 from page 1, working out of the box without issues. Thanks. Link to comment Share on other sites More sharing options...
MTZeon Posted August 19, 2008 Share Posted August 19, 2008 so wormy would work through dvi>vga dual screens? Polymere, try this pack atiradeonx1950pro_dmitrik_Edited.zip If I use this files, I do get QE/CI working but my menu is completly transparent (like if its not there, I can read the letters and icons, but cannot see the menu), also the screensavers don't work... Any ideas? I'm not using natit or agpgart, if I do, MacOS doesn't even boot... PowerColor X1950PRO AGP dual DVI 0x72801002 : 009a Link to comment Share on other sites More sharing options...
wonderjacky Posted August 20, 2008 Share Posted August 20, 2008 Take a look @ Bronyas first post: If fan noisy , download http://forum.insanelymac.com/index.php?act...st&id=18822Should solve you problem Hello, In fact the problem of the noisy fan with the natit_prionace driver seems to be working only with the X1950 PRO ATI cards and not with the X1950XTX. Has anybody been able to have a silently working X1950XTX ???? I am desperate... Francois. Link to comment Share on other sites More sharing options...
BOBSONATOR Posted August 21, 2008 Share Posted August 21, 2008 Kalyway 10.5.2 AMD Help Is Appreciated load.command should be I am now But my screen looks like this ???? Anyone? Link to comment Share on other sites More sharing options...
karishbhr Posted August 21, 2008 Share Posted August 21, 2008 My HD videos have been running choppily lately... could it have to do with graphics drivers? I have CI and QE hardware accelerated. Link to comment Share on other sites More sharing options...
SSSAMMM Posted August 21, 2008 Share Posted August 21, 2008 grandmars 1950pro 512 get blank / black screen after installing this driver (the one that comes with leo4allv3 as well) any thoughts? Link to comment Share on other sites More sharing options...
MTZeon Posted August 21, 2008 Share Posted August 21, 2008 I've got PowerColor x1950pro AGP and so far I've been able to activate QE/CI but there are bugs... Here: As you can see, I've got no menu on the top, and also screensavers don't work. I've used dmitrik_Edited. What can be done to fix this? Link to comment Share on other sites More sharing options...
hikky Posted August 22, 2008 Share Posted August 22, 2008 I'm desperate....my Sapphire 1950Pro 512 is still not working (@ Kalway 10.5.2, Zeph 10.5.2, Leo4All v3, iAtkos v2i, Lawless 10.5.4, iDeneb 10.5.4) Help would be appreciated! Link to comment Share on other sites More sharing options...
Bronya Posted August 23, 2008 Author Share Posted August 23, 2008 I've got PowerColor x1950pro AGP and so far I've been able to activate QE/CI but there are bugs...Here: As you can see, I've got no menu on the top, and also screensavers don't work. I've used dmitrik_Edited. What can be done to fix this? Yes. You should install the driver for this version , no wrong version . One , you should install OpenGL.framework for this version system ! NO WRONG VERSION ... ! Link to comment Share on other sites More sharing options...
MTZeon Posted August 25, 2008 Share Posted August 25, 2008 Yes. You should install the driver for this version , no wrong version . One , you should install OpenGL.framework for this version system ! NO WRONG VERSION ... ! Hum... I see. So I should not mix drivers from 10.5.3 with 10.5.4... Ok, I'm downloading http://www.apple.com/support/downloads/mac...omboupdate.html and take from it the OpenGL.framework and install it in 10.5.4 and see if it works. Thanks for the help Link to comment Share on other sites More sharing options...
lewwcian Posted August 25, 2008 Share Posted August 25, 2008 Same X1950 GT ID 7288 not working yet, Sapphire X1950GT 512mb, external power adapter nag on screen, resolutions can set well but no QE/CI enabled, 72a8 primary 7288 secondry revision IdD 0x009a EFI driver version "01.00.140", tried the "natit update" still didn`t solve it tried all drivers, also my mac is 10.5.4 but drivers install well. Link to comment Share on other sites More sharing options...
amiga_forever Posted August 26, 2008 Share Posted August 26, 2008 Same X1950 GT ID 7288 not working yet, Sapphire X1950GT 512mb, external power adapter nag on screen, resolutions can set well but no QE/CI enabled, 72a8 primary 7288 secondry revision IdD 0x009a EFI driver version "01.00.140", tried the "natit update" still didn`t solve it tried all drivers, also my mac is 10.5.4 but drivers install well. same thing... ATI x1950 GT id 7288... no QE/CI both on 10.5.2 and 10.5.4 Link to comment Share on other sites More sharing options...
cBozo Posted August 26, 2008 Share Posted August 26, 2008 Hi, Bronya. Big thx for your work, but my 1950pro 256mb (7280) not work, I have resolution menu, but QE/CI not work. Kalyway 10.5.2. ------------------------ Bronya, all thx. All work. Install OS from 0, dont use any driver at installation. After choose right driver for build my OS 9C7010 and QE/CI begin work. Link to comment Share on other sites More sharing options...
upgradepro Posted August 27, 2008 Share Posted August 27, 2008 Kalyway 10.5.2 ATI 1950GT 256mb (7280) QE\CI not working too((( Link to comment Share on other sites More sharing options...
Nadeem Posted September 16, 2008 Share Posted September 16, 2008 Any 10.5.5 Support ? Link to comment Share on other sites More sharing options...
Endymion7 Posted September 16, 2008 Share Posted September 16, 2008 Any 10.5.5 Support ? After updating to 10.5.5 today, i have nog QE support anymore.... Does someone know how to fix this? I tried to put back the old drivers. ATIRadeonX1000.kext ATIRadeonX1000GA.plugin ATIRadeonX1000GLDriver.bundle ATIRadeonX1000VADriver.bundle ATIRNDRV.kext Natit.kext But it doesn't fix the problem. Link to comment Share on other sites More sharing options...
Recommended Posts