Bronya Posted July 11, 2008 Author Share Posted July 11, 2008 Hey,I'm completely new to this item, I've installed Leo4AllV2, and the 10.5.2 driver for X1950Pro, got the files, but wjere do I put them? The're now in my download-folder. I read the CLI-lines on page#1 of this topic, but I guess I have to put the files somewhere else then the download folder?You download driver and unpack package , open folder and open file "load.command" and write password in terminal . Auto run reboot .Very nice, i've seen that on the "boot cd" topic! Congratulations.I've tryed to load your drivers with DFE but it dont work. Do you think you can do something about that?omg . i try gfx string . If no work , maybe conflict lol . Link to comment Share on other sites More sharing options...
Charon123 Posted July 11, 2008 Share Posted July 11, 2008 You download driver and unpack package , open folder and open file "load.command" and write password in terminal . Auto run reboot .omg . i try gfx string . If no work , maybe conflict lol . Hey Bronya, It works! (had to run the load.command in both folders) Only thing: I've got two Acer AL2016W's (dual monitor 1680x1050), primary is detected well (as Acer AL2016W) and gives right resolution, secondary is detected as VGA screen, no option to choose 1680x1050 in a list with many other resolutions. How can I change it? And QE is not supported according to system information. Any way to change that? Thanks in advance! You did a great job. Link to comment Share on other sites More sharing options...
Bronya Posted July 11, 2008 Author Share Posted July 11, 2008 Hey Bronya, It works! (had to run the load.command in both folders) Only thing: I've got two Acer AL2016W's (dual monitor 1680x1050), primary is detected well (as Acer AL2016W) and gives right resolution, secondary is detected as VGA screen, no option to choose 1680x1050 in a list with many other resolutions. How can I change it? And QE is not supported according to system information. Any way to change that? Thanks in advance! You did a great job. Your system version ??? Link to comment Share on other sites More sharing options...
syn909 Posted July 12, 2008 Share Posted July 12, 2008 Can someone please post one of there working GFX strings for this card, I have the PCI Express 256mb version of the x1950 pro. Also how do I stop this error from my console log with natit: Jul 11 23:31:52 localhost kernel[0]: Natit: Starting. Jul 11 23:31:52 localhost kernel[0]: device-id: 0x72A0 Jul 11 23:31:52 localhost kernel[0]: Natit: Setting @0,compatible=ATY,Prionace Jul 11 23:31:52 localhost kernel[0]: Natit: Setting @1,name=ATY,Prionace Jul 11 23:31:52 localhost kernel[0]: Natit: Setting @0,display-connect-flags=0x00000400 Jul 11 23:31:52 localhost kernel[0]: Natit: Setting @1,ATY,EFIDisplay=TMDSA Jul 11 23:31:52 localhost kernel[0]: Natit: Setting @0,AAPL,boot-display=0x00000001 Jul 11 23:31:52 localhost kernel[0]: Natit: Setting @0,name=ATY,Prionace Jul 11 23:31:52 localhost kernel[0]: Natit: Setting @1,compatible=ATY,Prionace Jul 11 23:31:52 localhost kernel[0]: Natit: Setting AAPL,slot-name=Slot-1 Jul 11 23:31:52 localhost kernel[0]: Natit: Setting @0,ATY,EFIDisplay=TMDSB Jul 11 23:31:52 localhost kernel[0]: Natit: Setting @1,device_type=display Jul 11 23:31:52 localhost kernel[0]: Natit: Setting @0,device_type=display Jul 11 23:31:52 localhost kernel[0]: Natit: Setting @1,display-connect-flags=0x00000400 Jul 11 23:31:52 localhost kernel[0]: Natit: Setting ATY,DeviceID=29320 Jul 11 23:31:52 localhost kernel[0]: Natit: Setting ATY,EFIVersion="01.00.140" Jul 11 23:31:52 localhost kernel[0]: Natit: Setting device_type=Display Jul 11 23:31:52 localhost kernel[0]: Natit: Setting name=ATY,PrionaceParent Jul 11 23:31:52 localhost kernel[0]: Natit: Setting @1,AAPL,boot-display=0x00000001 Jul 11 23:31:52 localhost kernel[0]: Natit: Setting AAPL,aux-power-connected=0x00000001 Jul 11 23:31:52 localhost kernel[0]: Natit: Setting ATY,MemVendorID=0x00000001 Jul 11 23:31:52 localhost kernel[0]: Natit: Setting ATY,EFIOrientation=2 Jul 11 23:31:52 localhost kernel[0]: Natit: Setting ATY,VendorID=0x00001002 Jul 11 23:31:52 localhost kernel[0]: Natit: Setting model=ATI unknown card Thanks, Taylor Link to comment Share on other sites More sharing options...
Charon123 Posted July 12, 2008 Share Posted July 12, 2008 Your system version ??? System 7.5.2 from Leo4allV2, clean install. Resolution solved with DisplayConfigX, are there other methods? QE not solved. Solutions are still welcome! Link to comment Share on other sites More sharing options...
Bronya Posted July 13, 2008 Author Share Posted July 13, 2008 System 7.5.2 from Leo4allV2, clean install.Resolution solved with DisplayConfigX, are there other methods? QE not solved. Solutions are still welcome!You please update to 10.5.4 ! No problem !Can someone please post one of there working GFX strings for this card, I have the PCI Express 256mb version of the x1950 pro.Also how do I stop this error from my console log with natit:Jul 11 23:31:52 localhost kernel[0]: Natit: Starting.Jul 11 23:31:52 localhost kernel[0]: device-id: 0x72A0Jul 11 23:31:52 localhost kernel[0]: Natit: Setting @0,compatible=ATY,PrionaceJul 11 23:31:52 localhost kernel[0]: Natit: Setting @1,name=ATY,PrionaceJul 11 23:31:52 localhost kernel[0]: Natit: Setting @0,display-connect-flags=0x00000400Jul 11 23:31:52 localhost kernel[0]: Natit: Setting @1,ATY,EFIDisplay=TMDSAJul 11 23:31:52 localhost kernel[0]: Natit: Setting @0,AAPL,boot-display=0x00000001Jul 11 23:31:52 localhost kernel[0]: Natit: Setting @0,name=ATY,PrionaceJul 11 23:31:52 localhost kernel[0]: Natit: Setting @1,compatible=ATY,PrionaceJul 11 23:31:52 localhost kernel[0]: Natit: Setting AAPL,slot-name=Slot-1Jul 11 23:31:52 localhost kernel[0]: Natit: Setting @0,ATY,EFIDisplay=TMDSBJul 11 23:31:52 localhost kernel[0]: Natit: Setting @1,device_type=displayJul 11 23:31:52 localhost kernel[0]: Natit: Setting @0,device_type=displayJul 11 23:31:52 localhost kernel[0]: Natit: Setting @1,display-connect-flags=0x00000400Jul 11 23:31:52 localhost kernel[0]: Natit: Setting ATY,DeviceID=29320Jul 11 23:31:52 localhost kernel[0]: Natit: Setting ATY,EFIVersion="01.00.140"Jul 11 23:31:52 localhost kernel[0]: Natit: Setting device_type=DisplayJul 11 23:31:52 localhost kernel[0]: Natit: Setting name=ATY,PrionaceParentJul 11 23:31:52 localhost kernel[0]: Natit: Setting @1,AAPL,boot-display=0x00000001Jul 11 23:31:52 localhost kernel[0]: Natit: Setting AAPL,aux-power-connected=0x00000001Jul 11 23:31:52 localhost kernel[0]: Natit: Setting ATY,MemVendorID=0x00000001Jul 11 23:31:52 localhost kernel[0]: Natit: Setting ATY,EFIOrientation=2Jul 11 23:31:52 localhost kernel[0]: Natit: Setting ATY,VendorID=0x00001002Jul 11 23:31:52 localhost kernel[0]: Natit: Setting model=ATI unknown cardThanks,TaylorWhat id card ?You copy from natit from 10.5.4 . Link to comment Share on other sites More sharing options...
Nadeem Posted July 14, 2008 Share Posted July 14, 2008 this is the third time i post this issue , After wake from sleep the fan is spinning like crazy ( At full speed ). is there a solution ? am using your latest package with Leo 10.5.4 Link to comment Share on other sites More sharing options...
Charon123 Posted July 14, 2008 Share Posted July 14, 2008 You please update to 10.5.4 ! No problem ! Hallo Bronya, problem(s) solved. Fixed resolution with DisplayConfigX. Fixed no CI/QE with jccool and your drivers. (First the jccools one, then the bronya right over it). But, the last time I forgot to put the original (jccool) ATINDRV.kext back in place, so stayed with Bronya's, but no problem whatsoever! What does the ATINDRV exactly do, e.g. what's the difference between jccool's and bronya's? FYI, also changed from Leo4all to kalyway10.5.2 (I do like the spinning wheel startup!) The update to 10.5.4 stops at est. 75% with no warning at all, just the update screen and nothing more.... Link to comment Share on other sites More sharing options...
colordeficiency Posted July 15, 2008 Share Posted July 15, 2008 After Installing I only get blue screen and nothing but cursor. i am also facing the same problem... x1950 pro pci-e... AMD.. anyone can shed some lights Link to comment Share on other sites More sharing options...
colordeficiency Posted July 15, 2008 Share Posted July 15, 2008 On a fresh install of Leo4Allv3, installed latest for 7280 with the load.command reboot and stuck at bluescreen with cursor. System was booting up fine before. Link to comment Share on other sites More sharing options...
Endymion7 Posted July 17, 2008 Share Posted July 17, 2008 Hi all, Running Fresh Retail leopard 10.5.4 with (All Updates) and changed the following kexts (dsmos, Intelcpudisabler, Alcinject+applehda, applesmbios, jmicronata), MOBO= Ga-ep35-Ds3R, F2 bios, pentium dualcore e2180 After figuring that the videocard was a 1950pro 256mb, tried to install your (ati9e17 1054) package: This package made 2 monitors work (dvi+hdmi) but NO QE and NO CI. After that, tried your (ati9d34 1053 package) put the kexts OVER the 1054 ones, This package made 2 monitors work (dvi+hdmi) and QE and CI + Sleep/wake <<<<<<<< ALMOST GOOD Only problem is that videoplayback is very CHOPPY, from mov to avi, from 480p to 1080p h264, ONLY DVDplayer plays DVD good. The difference between the two packages is that the 9e17 packages LACKS 2 files compared to the 9d34package: IONDRVSupport.kext AppleNDRV=folder Do you have any idea? Link to comment Share on other sites More sharing options...
rqrqrq Posted July 18, 2008 Share Posted July 18, 2008 Can the driver(Ati_9e17) work on X1650XT?I installed the drivers(9D34),QE /CI fine but menu Transparent.How can i do? Link to comment Share on other sites More sharing options...
BOBSONATOR Posted July 23, 2008 Share Posted July 23, 2008 Kalyway 10.5.2 AMD X1950 Pro 512mb Card PCI-E , but i get this after install ATI Radeon X1950 Series: Chipset Model: ATI Radeon X1950 Series Type: Display Bus: PCIe Slot: Slot-1 PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: ATI (0x1002) Device ID: 0x7280 Revision ID: 0x009a ROM Revision: ATYinject X1900 0.0.1 EFI Driver Version: "01.00.140" Displays: Display: Resolution: 1024 x 768 Depth: 32-bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported Display Connector: Help Is Appreciated NVM, fixed it, lazy ass error by the creator, load.command should be #/bin/sh LOCPATH=`/usr/bin/dirname "$0"` cd "$LOCPATH" sudo cp -r -v ATIRNDRV.kext /System/Library/Extensions sudo cp -r -v ATIRadeonX1000.kext /System/Library/Extensions sudo cp -r -v ATIRadeonX1000GA.plugin /System/Library/Extensions sudo cp -r -v Natit.kext /System/Library/Extensions sudo rm -rf /System/Library/Extensions.mkext sudo rm -rf /System/Library/Extensions.kextcache sudo chown -R root:wheel /System/Library/Extensions sudo chmod -R 755 /System/Library/Extensions sudo reboot I am now ATI Radeon X1950 Series: Chipset Model: ATI Radeon X1950 Series Type: Display Bus: PCIe Slot: Slot-1 PCIe Lane Width: x16 VRAM (Total): 512 MB Vendor: ATI (0x1002) Device ID: 0x7280 Revision ID: 0x009a ROM Revision: ATYinject X1900 0.0.1 EFI Driver Version: "01.00.140" Displays: M24EI5: Resolution: 1920 x 1200 @ 60 Hz Depth: 32-bit Color Core Image: Hardware Accelerated Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported Rotation: Supported Display Connector: Status: No display connected But my screen looks like this Link to comment Share on other sites More sharing options...
Peter R. Posted July 24, 2008 Share Posted July 24, 2008 Ok, this is my experience Bronya. The Machine is an Intel E2200 on a Gigabyte G31 mobo with X1950Pro PCIe graphics, Leo4All Distro. Full specs below. I'd run into problems with GL errors when starting second Life. The Leo4All V3 was installed with : 9.2.2 Modbin Kernel, 800 MHz hardcoded SMB, ICH chipset option, Built in 19X0 support, Azalea codec, no NIC kext installed. NIC driver downloaded from Realtek website. I did the removes as stated in your first post, and installed the driver for 7280 and OSX 10.5.2, as Leo4All is 10.5.2. After the machine rebooted, I got a blue screen, two black lines on top, and a mouse cursor. Everything else was gone. After swearing a lot and damning Bronya to hell (several times), I reinstalled Leo4All V3, this time selecting 9.2.2 modbin, 800Mhz Hardcoded SMB, and only ICH and Azalea as supplemental drivers. Predictably the system booted in 1024*768 with no GL support whatsoever. I then just clicked the .command on Bronya's driver pack, and rebooted. I changed nothing else whatsoever. The system rebooted and came back with full accelerated GL support and no glitches whatsoever. I then installed OSX tools and Netkas' serial code kext, NIC kext and that was it. Since then SL works brilliantly, Toast 9 Ti causes no more issues, all my harware works and the software for my camera and multifunctional installed with no issues. The system is fast and very responsive, no artifacts or driver issues whatsoever. Now I wonder what would happen if I took it to 10.5.4, but I daren't Thanks Bronya ! Peter R. Link to comment Share on other sites More sharing options...
Endymion7 Posted July 24, 2008 Share Posted July 24, 2008 Hi all, Running Fresh Retail leopard 10.5.4 with (All Updates) and changed the following kexts (dsmos, Intelcpudisabler, Alcinject+applehda, applesmbios, jmicronata), MOBO= Ga-ep35-Ds3R, F2 bios, pentium dualcore e2180 After figuring that the videocard was a 1950pro 256mb, tried to install your (ati9e17 1054) package: This package made 2 monitors work (dvi+hdmi) but NO QE and NO CI. After that, tried your (ati9d34 1053 package) put the kexts OVER the 1054 ones, This package made 2 monitors work (dvi+hdmi) and QE and CI + Sleep/wake <<<<<<<< ALMOST GOOD Only problem is that videoplayback is very CHOPPY, from mov to avi, from 480p to 1080p h264, ONLY DVDplayer plays DVD good. The difference between the two packages is that the 9e17 packages LACKS 2 files compared to the 9d34package: IONDRVSupport.kext AppleNDRV=folder Do you have any idea? Found a bug in the 9e17 package from Bronya. You have to edit the info.plist ATIRadeonX1000GA.plugin search for "10027280-0000-0000-0000-000a27898d3e.aside" > change into "10027280-0000-0000-0000-000a27898d3e" then the 9e17 driver is working fine in 10.5.4 without the 10.5.3 package one BUG left only movies played in quicktime are very slow. Playing movies with VLC player or Front row in combination with Perian 1.1 works smooth , even 1080p movies coded with h264. .mov, mkv, avi Link to comment Share on other sites More sharing options...
nama2g Posted July 27, 2008 Share Posted July 27, 2008 am having issues with quitime playback too though not as mentioned above. i got an efi string for this card and i get full support with the atiradeon100.kext from the 9e17 package but quicktime playback is lacking some color quality(like 256). everythings else works fine jus quicktime. if i use natit it works fine alround. anyone have an idea what i need to change? see attatched files, am running 10.5.4 retail the 9e17 package works perfect when installed. juss like the added boot upspeed from the efi string plus the spinning wheel is show properly. got the string from the bottom of this link;;;; http://www.insanelymac.com/lofiversion/ind...hp/t113967.html traumacleanPrionace.hex.zip Link to comment Share on other sites More sharing options...
Bronya Posted July 27, 2008 Author Share Posted July 27, 2008 sorry , i dunno . Link to comment Share on other sites More sharing options...
nama2g Posted July 27, 2008 Share Posted July 27, 2008 sorry , i dunno . quicktime 7.5 doesnt like my efi string but 7.4.1 works just fine. thanks for the great work. Link to comment Share on other sites More sharing options...
Schrabikus Posted July 28, 2008 Share Posted July 28, 2008 Hi everyone! My Sapphire AGP Radeon x1950GT 256mb (7288 1002) is working with QE/CI hardware acc. in full resolution, but there is no OpenGL accel. in Adobe AfterEffects, Photoshop, etc. driver: Bronya's http://rapidshare.com/files/91667875/10 _5_2_9c31.zip, OS: iATKOS Leopard 10.5.2 9C31 What i have to do to turn on Hardware OpenGL acc.? Link to comment Share on other sites More sharing options...
Bladel Posted July 29, 2008 Share Posted July 29, 2008 On a fresh install of Leo4Allv3, installed latest for 7280 with the load.command reboot and stuck at bluescreen with cursor. System was booting up fine before. Same problem here with Leo4All V3. Found any solution? Link to comment Share on other sites More sharing options...
Bronya Posted July 31, 2008 Author Share Posted July 31, 2008 Same problem here with Leo4All V3. Found any solution? Yes. You eject disk dvd ))) and work . i same have problem ))) Link to comment Share on other sites More sharing options...
MTZeon Posted August 2, 2008 Share Posted August 2, 2008 Do I need to install AGPGart for my X1950PRO AGP? Link to comment Share on other sites More sharing options...
Deryugin Posted August 3, 2008 Share Posted August 3, 2008 Yes. You eject disk dvd ))) and work . i same have problem ))) no results. blue screen appears again. after all i boot with -s and delete all ATI*.kext in /system/library/extensions/ then it shows 1024x768 again, but video became identified as Ati Radeon x1950 series (natit works) Link to comment Share on other sites More sharing options...
Bronya Posted August 3, 2008 Author Share Posted August 3, 2008 no results. blue screen appears again.after all i boot with -s and delete all ATI*.kext in /system/library/extensions/ then it shows 1024x768 again, but video became identified as Ati Radeon x1950 series (natit works) Sorry , i dunno . Maybe your dvd it is problem. If blue screen , then problem it is no original update from 10.5.4 ! Your should update original mac os x 10.5.4 combo update from apple.com ! Link to comment Share on other sites More sharing options...
MTZeon Posted August 4, 2008 Share Posted August 4, 2008 Do I need to install AGPGart for my X1950PRO AGP? So I installed AGPGart 2.7.1 (the latest) and my card is recognized as AGP as expected. Unfortunatly I can't get my Powercolor X1950PRO 256MB AGP dual DVI (7280 1002, revision 009a) to work properly and I don't know what to do. If I install the latest package from you Bronya 10.5.3(9D34), it boots up but then I'm left with a blue screen, I can see the mouse and move it around but no desktop. In order to get the desktop, if I press the power button of my computer, and then back on, I get the desktop but the screen is locked up and I can't interact with the desktop. I've tried many combinations, using previous versions of your drivers, using jccools drivers gives me control over the desktop, but no QE Can you help? Link to comment Share on other sites More sharing options...
Recommended Posts