Wig72 Posted May 31, 2008 Share Posted May 31, 2008 Works like a charm - Sapphire ATI1950pro - But after wake up from sleep, vga fan rotating and a small ATI Icon is shown in the middle of the desktop ?!? Link to comment Share on other sites More sharing options...
halsaman Posted May 31, 2008 Share Posted May 31, 2008 Hi !I added driver in post #1 ! The one driver support for ID's 7288 and 7280 . Result here . I'm using dual displays. QE/CI are working well with the new driver. 10.5.3 is the first release that can do the sleep/wake correctly for me. I was very happy with it yesterday, but without QE/CI. However, after updating the video driver with Bronya's , after wake I have the same ATI Icon as Wig72 with a flashing part (it looks like the additional power connector failing), and one of my displays isn't working. After restart everything is fine. Link to comment Share on other sites More sharing options...
Trauma! Posted May 31, 2008 Share Posted May 31, 2008 Probably you have overwritted both, new (and problably improved) Ati drivers and new (and probably improved) OpenGL framework...I wouldn't had done that if I were you. Is nothing but a potential source of problems. No problems at all about that man, if i said it working well....then it is working. But i'm totally agree with you about the drivers and framework improvement Now i'm going to install the new bronya stuff, thanks again bronya!!!! You are really fast. EDIT: The new driver seems to work perfectly, with little improvement!!! My Xbench scores : 10.5.2 = 190 / 10.5.3 + driver from 10.5.2 = 194 / 10.5.3 + latest driver = 196 Link to comment Share on other sites More sharing options...
padman Posted May 31, 2008 Share Posted May 31, 2008 Bronya! Thanks so much for your help! I am still having trouble getting QE post update. What should I do to try to fix. Thanks ATI Radeon X1950 Series: Chipset Model: ATI Radeon X1950 Series Type: Display Bus: PCIe Slot: Slot-1 PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: ATI (0x1002) Device ID: 0x7280 Revision ID: 0x0000 EFI Driver Version: "01.00.140" Displays: L226WT: Resolution: 1680 x 1050 @ 60 Hz Depth: 32-bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported DELL E196FP: Resolution: 1024 x 768 @ 75 Hz Depth: 32-bit Color Core Image: Software Mirror: Off Online: Yes Quartz Extreme: Not Supported Link to comment Share on other sites More sharing options...
Jhero Posted May 31, 2008 Share Posted May 31, 2008 Works like a charm Bronya, Thanks! Link to comment Share on other sites More sharing options...
VooD Posted May 31, 2008 Share Posted May 31, 2008 Wake/Sleep is not an important feature...osx boots in about 20 seconds in nowadays hardare. Link to comment Share on other sites More sharing options...
johnnyftw Posted May 31, 2008 Share Posted May 31, 2008 I have a visiontek x1950pro agp 256mb is this card supported? and How do I install this? Link to comment Share on other sites More sharing options...
Aries326 Posted May 31, 2008 Share Posted May 31, 2008 Bronya, I lost my serial number to displayconfigx and with the new update, I still need the program to get 1360x768 to work with OSX. The author of the program hasn't emailed me back with a new serial number. Is there anyway you can edit your driver using the info I provided in one of my other posts so that 1360x768 is supported in your driver without having to use displayconfigx? Thanks. If not, I'll just pay the guy for another license. Link to comment Share on other sites More sharing options...
johnnyftw Posted May 31, 2008 Share Posted May 31, 2008 I find it hard to believe that no one knows how to install drivers? Do i just add these files to System/Library and then go to Terminal and do the commands? Link to comment Share on other sites More sharing options...
Aries326 Posted June 1, 2008 Share Posted June 1, 2008 I find it hard to believe that no one knows how to install drivers? Do i just add these files to System/Library and then go to Terminal and do the commands? I just double click the load command and that seems to work. Link to comment Share on other sites More sharing options...
Trauma! Posted June 1, 2008 Share Posted June 1, 2008 I find it hard to believe that no one knows how to install drivers? Do i just add these files to System/Library and then go to Terminal and do the commands? Just download the driver, then unzip it. After what you just have to double click the "load.command" file.... That's all. Link to comment Share on other sites More sharing options...
johnnyftw Posted June 1, 2008 Share Posted June 1, 2008 ^ after do the sudo -s and so on from the ops post? Link to comment Share on other sites More sharing options...
James Hall Posted June 1, 2008 Share Posted June 1, 2008 Bronya! Thanks so much for your help! I am still having trouble getting QE post update. What should I do to try to fix. Thanks ATI Radeon X1950 Series: Core Image: Software Quartz Extreme: Not Supported I'm having the same issue - downloaded the latest for 9d34, ran load.command, it popped open Terminal as expected, I gave it my pw and saw the scrolly lines as expected, and rebooted as expected - but still no CI/QE.Are there any boot options that might help this? EDIT: THANK YOU. :censored2: I went back to the original post and followed the instructions at the end - the set that begin with sudo -s.After entering these commands and restarting my system, I have full CI/QE!THANKS! :censored2: Padman, if you're still having trouble, look at the first post in this thread and try the instructions at the bottom. Link to comment Share on other sites More sharing options...
johnnyftw Posted June 1, 2008 Share Posted June 1, 2008 Just download the driver, then unzip it. After what you just have to double click the "load.command" file....That's all.Hey, um I did that and I got the "grey restart screen of death".. does anyone know if the Visiontek ATI X1950 Pro AGP (256) is supported? its ID is 7280. and This is what I did..Installing Leopard (went fine) Downloaded the 10.5.2 updated drivers in this threadRan the "Load.command" then it Restarted automaticallyand when it Rebooted I got that Grey screen telling me I need to Reboot my Mac. Which Drivers do I need for my card? Running Leopard 10.5.2 Link to comment Share on other sites More sharing options...
johnnyftw Posted June 1, 2008 Share Posted June 1, 2008 ^ Anybody? Link to comment Share on other sites More sharing options...
padman Posted June 1, 2008 Share Posted June 1, 2008 I'm still having trouble with the latest drivers, but the drivers that Bronya posted on 8-May work like a charm and even sleep works without the ATI icon coming up in the center of the screen. Link to comment Share on other sites More sharing options...
nikeita Posted June 1, 2008 Share Posted June 1, 2008 mmm.. it's not a boot race problem, but with all that explosion in costs of energy it's very usefull to put in sleep/energy save mode at night or while not using "the beast". don't you think? Wake/Sleep is not an important feature...osx boots in about 20 seconds in nowadays hardare. Link to comment Share on other sites More sharing options...
halsaman Posted June 1, 2008 Share Posted June 1, 2008 mmm.. it's not a boot race problem, but with all that explosion in costs of energy it's very usefull to put in sleep/energy save mode at night or while not using "the beast". don't you think? The fast sleep/wake is a sign of OSX superiority for me... I dig it on my Macbook, and the moment it started to work on my Hackintosh was a red letter day. I appreciate Bronya's work very much, and hope this small problem can be treated somehow... The may8 update on 10.5.3 caused serious errors for me, system hung. Link to comment Share on other sites More sharing options...
Bronya Posted June 2, 2008 Author Share Posted June 2, 2008 Hi . Try the ATIRNDRV.kext . Copy to folder /system/library/extensions and repair permissions . The driver work or no work after sleep ... Link to comment Share on other sites More sharing options...
halsaman Posted June 2, 2008 Share Posted June 2, 2008 Hi .Try the ATIRNDRV.kext . Copy to folder /system/library/extensions and repair permissions . The driver work or no work after sleep ... It works! It works!!! Everything's working fine the first time since I use osx on pc. Bronya, thank you. You rule! Now I feel I have a real Mac Pro, with a slightly different chassis. Link to comment Share on other sites More sharing options...
Trauma! Posted June 2, 2008 Share Posted June 2, 2008 Hello, I've tested the new ATIRNDRV.kext, that's work fine here too !!! It's solved the ATI logo problem when waking up from sleep. (when using Prionace) There"s no problem when i use the PrionaceB. I still have problems with USB, it's waking up my computer alone. Link to comment Share on other sites More sharing options...
johnnyftw Posted June 2, 2008 Share Posted June 2, 2008 Still getting a Grey Screen saying I need to restart after Installing.. am I doing this right? What I do is.. I copy all the files (from the zip) into System/Library/Extensions Then I run those commands in Terminal and then Reboot? right? also I get a popup when i put those files into Extensions saying something It could not be replaced or something (but they do) Please help! Link to comment Share on other sites More sharing options...
themax Posted June 2, 2008 Share Posted June 2, 2008 Hi Im a totally newbie,after some try i can`t get QE Active. Finally i get this at this way. 1-Install Kalyway 10.5.2 whitout any drivers active on installation. 2-Simply doble click load.command archive of the drivers package,put your user password (you need a password,first time i install leopard whitout root password and can`t install),reboot,enjoy. Link to comment Share on other sites More sharing options...
Trauma! Posted June 2, 2008 Share Posted June 2, 2008 Still getting a Grey Screen saying I need to restart after Installing.. am I doing this right? What I do is.. I copy all the files (from the zip) into System/Library/Extensions Then I run those commands in Terminal and then Reboot? right? also I get a popup when i put those files into Extensions saying something It could not be replaced or something (but they do) Please help! Delete manually all files related to X1000 in the System/Library/Extensions (the sames that in the zip) then double click the command file, or place the files in the System/Library/Extensions folder. If you place the files manually run the terminal commands of the first post. That's sould be ok after that. Link to comment Share on other sites More sharing options...
djwild Posted June 2, 2008 Share Posted June 2, 2008 The driver works great!!!! Bronya, we love you!!! Link to comment Share on other sites More sharing options...
Recommended Posts