Maulwurfi Posted November 16, 2007 Share Posted November 16, 2007 Tristen's thing worked here for 10.5.1 as well (but for X1950Pro and of course it's 10.5 driver). Link to comment Share on other sites More sharing options...
OlivDS Posted November 16, 2007 Share Posted November 16, 2007 Hi everyone! Is anyone using Keynote with the Bronya's drivers? Because when I quit the slideshow the mouse is replaced by a blinked horyzontal line and it's quite boring xD The only way I found to fix this problem is to restart..... I've the Sapphire x1950pro 256mo with CI/QE fully working on 10.4.10 Any help? thanks! Link to comment Share on other sites More sharing options...
gev2006 Posted November 17, 2007 Share Posted November 17, 2007 Hi Bronya, I've a Radeon X1950Pro 256Mb (7280) and your drivers works very well, QE/CI/OpenGL/Rotation/ on dual DVI, but I've a problem... When I start the system (Leopard 10.5.1), I must reboot it a lot of time because it crashes with a white screen, like White Screen Of Death in linux... This problem is the same with Leo 10.5 and Tiger 10.4.10... I try everytime to repair permission and check the disk during the boot (fsck -fy...), but nothing change... What can I do?... There is a solution?... Thanks. Link to comment Share on other sites More sharing options...
schneeleopard Posted November 17, 2007 Share Posted November 17, 2007 I Love you. Link to comment Share on other sites More sharing options...
thefinalprophecy Posted November 19, 2007 Share Posted November 19, 2007 Upgraded to 10.5.1 and lost QE/CI support. Tried re-installing your driver package but nothing. What happened? Sucks cuz now I can't use VLC Media Player! Qe/Ci works with 1950gt(0x7288) on 10.5.1 If you update from 10.5.0 to 10.5.1 Qe/Ci won't work Here is What I did Delete /System/Library/Extensions/ATIRadeonX1000 , ATIRadeonX1000GA, ATINDRV, ATIRadeonX1000GLDriver, ATIRadeonX1000VADrvier, and Natitthen reinstall the 1950gt package for 7288This works with 7280 too. Thanks! Link to comment Share on other sites More sharing options...
Maulwurfi Posted November 19, 2007 Share Posted November 19, 2007 For some reason I see interference on screen especially with some colours. I mean crawling diagonal lines. I don't see this on Windows side, and I am using DVI on my X1950Pro. Can this be driver related? Link to comment Share on other sites More sharing options...
Trauma! Posted November 19, 2007 Share Posted November 19, 2007 Hey Tristen's method works here to!!!! On Sapphire X1950 pro Dev Id 7280. Delete /System/Library/Extensions/ATIRadeonX1000 , ATIRadeonX1000GA, ATINDRV, ATIRadeonX1000GLDriver, ATIRadeonX1000VADrvier, and Natit. I've also deleted the Extensions.mkext then reinstall the 1950gt package for 7280. And it's all right now. Link to comment Share on other sites More sharing options...
Scrizz Posted November 19, 2007 Share Posted November 19, 2007 x1950pro users don't use the "1950gt package for 7288" Link to comment Share on other sites More sharing options...
zhenyu Posted November 20, 2007 Share Posted November 20, 2007 why? I can`t download? anyone can send to me? thanks. fengfeng0823@gmail.com I need 7288.zip for osx 10.4.10 Link to comment Share on other sites More sharing options...
Korich Posted November 20, 2007 Share Posted November 20, 2007 Hello, I instal Leo and after first start instal patch and video drivers from arhiv and system was always reboot ( what me do? Link to comment Share on other sites More sharing options...
Scrizz Posted November 20, 2007 Share Posted November 20, 2007 did you install efi/ Link to comment Share on other sites More sharing options...
Korich Posted November 21, 2007 Share Posted November 21, 2007 did you install efi/ no I forgot Today try it install Link to comment Share on other sites More sharing options...
Goron Posted November 21, 2007 Share Posted November 21, 2007 I´m a bit confused after reading this thread: which package should be fine for x1950 gt 512MB PCI-E on leopard ??? Link to comment Share on other sites More sharing options...
foxping Posted November 21, 2007 Share Posted November 21, 2007 Hello, i´ve a short question understanding the Installation - process... My OS is 10.4.9 like mentioned in my sig. My Card is a Club 3d X1950pro Pci-E 1.deletet all ATI and GEforce Files in /system/library/Extensions 2. Installed jccools files for 10.4.10 3. Installed (Dmitrik´s) Ati_x1950GT_Pro.mpkg package without ATINDRV.kext I can change resolution on my Samsung 19" TFT to 1280 x 1024, on DVI , but i don´t have QE / Ci (and rotation) ... can someone tell me whether my installation procedure is correct? Would make me very happy.. the 3rd day installing/ reinstalling without success foxping Link to comment Share on other sites More sharing options...
Scrizz Posted November 22, 2007 Share Posted November 22, 2007 @foxping: don't install jccools drivers just install bronyas driver Link to comment Share on other sites More sharing options...
foxping Posted November 22, 2007 Share Posted November 22, 2007 thx Scrizz & Bronya watch my sig ! Link to comment Share on other sites More sharing options...
grodecki Posted November 24, 2007 Share Posted November 24, 2007 Just installed 10.4.10... tried to install the X1950 Pro driver and I get full resolution change but no CI/QE. Card is a Sapphire X1950pro 256mb with 7280 devid, any kind sole able to help me out? Link to comment Share on other sites More sharing options...
ziggypop1234 Posted November 24, 2007 Share Posted November 24, 2007 after reading this post from start to finish! i was able to get CI/QE to work on my sapphire ATI 1950 pro 512mb AGP card device id 7280, with full res etc. Yesterday I upgrade my system to 10.4.11 and i am no longer getting CI/QE support. Any ideas guys? Ive tried deleting and re-installing ATI_x1950gt_pro package made by BRONYA but to no avail. Whats also really strange is when i had 10.4.10 the vram total was showing 256mb now on 10.4.11 its showing my full 512mb. Any help on this would be greatly appreciated. Link to comment Share on other sites More sharing options...
foxping Posted November 25, 2007 Share Posted November 25, 2007 i would need help too, upgraded my system too 10.4.11 and now only one resolution (1024 * 768) with absolutely no support with bronyas 10.4.10 version.. what can I / we do? bye and thx in advance Link to comment Share on other sites More sharing options...
ziggypop1234 Posted November 26, 2007 Share Posted November 26, 2007 i seem to have somehow fixed it on 10.4.11, pop in Mac nub`s 10.4.10 dvd in, deselect "all" except for ati 1900 driver do not select jccool driver. Reboot, install Bronya 7280 drivers, repair permissions and back to full res and hardware support. I still seem to have a problem on choppy video in vlc especially with mkv hd files. My winxp flys in vlc on mkv hd files. Link to comment Share on other sites More sharing options...
bymclaugh Posted November 29, 2007 Share Posted November 29, 2007 Ok, this is my first time posting here, so bear with me. I've run into an issue that I just can't seem to resolve. I have a Dell XPS 400 with an ATI Radeon 1950 Pro card. I can get the card working just fine with Bronya's drivers (Thanks Bronya!), however, as soon as I do get that working, the audio on my machine gets screwed up. I end up getting a whole lot of pops and cracks, and it's quite annoying. I've tried several different installs, a few different versions of Uphuck's 10.4.9, as well as Kalyway's 10.4.10, and it happens the same way every time. Before the Video display drivers are installed, the audio works fine (I'm using a Sound Blaster USB 24 bit for sound), but as soon as Bronya's graphics drivers are installed (and I get full QE and CI), the sound goes batty. It's worst when I'm trying to watch video, as then the sound pops and cracks all of the time, but if I'm listening to just audio, it still does it, just not nearly as often or as loud. Can anyone out there help, or at least point me in the right direction, as I've tried searching online several times, and just can't seem to find the answer. Of course, it doesn't help that I'm new to all of this Mac stuff, and don't really understand it all yet. Thanks in advance for any help! BY Link to comment Share on other sites More sharing options...
ziggypop1234 Posted November 30, 2007 Share Posted November 30, 2007 lost qe ci after 10.5.1 upgrade on my ati x1950pro agp 512mb card device id 7280. The leopard installer seems to only work with 10.5 is there going to be an update for 10.5.1? Link to comment Share on other sites More sharing options...
Bronya Posted November 30, 2007 Author Share Posted November 30, 2007 Hi ALL !!! I Fix Driver and How WORK FULL DRIVER FOR x1950 ! Work dual two monitors and TV !!! Wait !!! SOON ! Link to comment Share on other sites More sharing options...
Gbone Posted November 30, 2007 Share Posted November 30, 2007 Bronya You are a GOD! TV-out support, I've been waiting for this for a long time. I love my ATI card (ASUS X1950Pro - Working like a charm with your driver.) Thank You very much. I am looking forward to trying it on my Leo. Link to comment Share on other sites More sharing options...
Bronya Posted November 30, 2007 Author Share Posted November 30, 2007 The driver tomorrow ! Link to comment Share on other sites More sharing options...
Recommended Posts