ziggypop1234 Posted November 30, 2007 Share Posted November 30, 2007 this is excellent news Bronya! hope this includes fix for 10.5.1 too. Can`t wait for this..tv output wow! Link to comment Share on other sites More sharing options...
Scrizz Posted November 30, 2007 Share Posted November 30, 2007 wow excellent news bronya, i might have to go buy an agp board just so I can use my x1950GT AGP n e one interested in buying my x1950GT agp? pm me if you are Link to comment Share on other sites More sharing options...
Bronya Posted December 1, 2007 Author Share Posted December 1, 2007 Thanks ! In post #1 updated news ! For other version system and id 7288 soon . Link to comment Share on other sites More sharing options...
ziggypop1234 Posted December 1, 2007 Share Posted December 1, 2007 getting a system extension cannot be used error quote the system extension "/system/library/extensions/atitvout.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the products`s vendor for an update. on 10.4.11 after I performed the upgrade using your ATI_TV_X1950_Tiger pkg for 10.4.11 any ideas Bronya? Link to comment Share on other sites More sharing options...
Bronya Posted December 2, 2007 Author Share Posted December 2, 2007 You download driver x1900 from www.ati.com for mac pro and install and reboot . Link to comment Share on other sites More sharing options...
shellcoder Posted December 2, 2007 Share Posted December 2, 2007 Bronya, I have one question. I have installed ATI X1950Pro (id 7280 by ASUS) on my Leopard 10.5.1 (AMD based system). It works like a charm and many thanks for that! But I wondering if I mess something wrong, coz I couldn't find the window like on the screen below: Could you (or anyone on that forum) tel me how to do it. Link to comment Share on other sites More sharing options...
ysndnz Posted December 2, 2007 Share Posted December 2, 2007 can ı update 10.5.0 to 10.5.1 with this? Link to comment Share on other sites More sharing options...
Kevin Email Posted December 2, 2007 Share Posted December 2, 2007 Yeah (Almost there) I just installed the new Lep Drivers on 10.5.1 and DUal monitors works great over DVI but I have lost hardware acceleration. Any Hints? Link to comment Share on other sites More sharing options...
thefinalprophecy Posted December 3, 2007 Share Posted December 3, 2007 Bronya can you link me to the Intel MacPro driver on ATI's site? I can only find the one that says for G5. Also, how do you get rid of mouse tearing? Trying to edit video with Final Cut Pro and the mouse keeps jumping Link to comment Share on other sites More sharing options...
Scrizz Posted December 3, 2007 Share Posted December 3, 2007 @thefinal: the only one available is for the G5; just google around and you will see the way to make it install in intel EDIT: here's a link http://www.macgeekery.com/hacks/software/a...ty_on_a_mac_pro Link to comment Share on other sites More sharing options...
mydograft Posted December 3, 2007 Share Posted December 3, 2007 I have no words, only, thanks Bronya. Edit: I have found some words. x1950pro pci-e 256mb Tv-out is great and working on 10.5.1 I have got more then a few new resolutions(all working),above the limit of my 19" lcd,such as 1600x1200 1600x1280 and more. Bugs: when I press "Detect Displays" my main lcd screen loses input,and only my tv is working,only after restart all is ok. when I try to mirror resolutions that only my tv support , I get this blue cover on my lcd,(I can see the desktop ,but can't change anything,and again only restart helps. Thanks a million. Link to comment Share on other sites More sharing options...
Sasch Posted December 4, 2007 Share Posted December 4, 2007 I have install Leo new. PC_Evi v8 and 10.5.1 update. I had the problem that my resolution are Ok but the Qe and Ci not working after the installation of the driver from Bronya . Then i have delete the ATIRadeonX1000.kext - restart - the install again the driver from Bronya - and it works the 0x7280 with Qc and Ci on 10.5.1 . I hope it help you Link to comment Share on other sites More sharing options...
Bronya Posted December 5, 2007 Author Share Posted December 5, 2007 I have install Leo new.PC_Evi v8 and 10.5.1 update. I had the problem that my resolution are Ok but the Qe and Ci not working after the installation of the driver from Bronya . Then i have delete the ATIRadeonX1000.kext - restart - the install again the driver from Bronya - and it works the 0x7280 with Qc and Ci on 10.5.1 . I hope it help you :censored2: You in single user -f -v -s and delete /system/library/extensions.kextcache and extensions.mkext !!! And reboot ! Link to comment Share on other sites More sharing options...
Kevin Email Posted December 5, 2007 Share Posted December 5, 2007 YAHOOOOOOOOOOOO.. WOrking perfectly! Thanks Sasch for your suggestion! I must have deleted something so I restored the kexts from when I freshly installed 10.5.1 (Thank goodness for backups) and then re-installed the driver from post 1. VOILA Dual DVI Monitors working with HW Accel!! I am in heaven!! This rock's. No need to boot into windows again!!! Kevin PS.. BRONYA thank you SO MUCH for keeping working on this!!! Link to comment Share on other sites More sharing options...
Bronya Posted December 5, 2007 Author Share Posted December 5, 2007 Enjoy ! Link to comment Share on other sites More sharing options...
^kaneda Posted December 6, 2007 Share Posted December 6, 2007 cant wait for 7288 !!!!!!!!! Link to comment Share on other sites More sharing options...
Maulwurfi Posted December 6, 2007 Share Posted December 6, 2007 Thank you again for the drivers. I still have the crawling interference lines on some coloured backgrounds (middle gray in Logic for example). I don't have this on Vista side. I wonder what the reason could be? Using DVI. EDIT: I now tried with VGA and I don't see that "interference on some grey colours" problem, but the picture isn't quite as sharp as DVI... Link to comment Share on other sites More sharing options...
bushd Posted December 6, 2007 Share Posted December 6, 2007 cant wait for 7288 !!!!!!!!! me too, please hurry! its the last missing piece of my AMD-Leopard Link to comment Share on other sites More sharing options...
docd Posted December 6, 2007 Share Posted December 6, 2007 Hello there! First of all, thank you for your good work, Bronya! But I have a problem now, and I cannot figure out what's going on. The drivers worked fine on 10.4.8. I then upgraded to 10.4.9 and then 10.4.10, with 10.4.10 kernel. After the upgrade, i had the following problem: http://forum.insanelymac.com/index.php?showtopic=54131 (Graphics were corrupted under wow.) I then installed the 10.4.10 driver from the first page (the installer file). After that I had no more OpenGL support. System Profiler says that I have QE/CI support, but if I open up WoW or Google Earth or anything else that uses OpenGL (even the screensaver!) the area where the graphic should be stays black or white, and theres no graphics. Any Idea would be appreciated! So long, docd Edit: Graphics Card is an x1950pro Link to comment Share on other sites More sharing options...
Maulwurfi Posted December 7, 2007 Share Posted December 7, 2007 The picture is OK on VGA so I don't have that "interference" problem anymore, but: For some reason a couple of audio plugins crash with your driver on Leopard. This doesn't happen in Tiger. I suspect that it has something to do with the display driver, because the crash happens just before the user interface comes up. Strange? The plugins work fine on a normal Mac - also on Leopard. Link to comment Share on other sites More sharing options...
Korich Posted December 7, 2007 Share Posted December 7, 2007 in Tiger 10.4.10 Driver not correct work when start screen saver - all drawing in white color in quiketime - video is whtite too replace on old drivers - video is slow Link to comment Share on other sites More sharing options...
ziggypop1234 Posted December 8, 2007 Share Posted December 8, 2007 I have install Leo new.PC_Evi v8 and 10.5.1 update. I had the problem that my resolution are Ok but the Qe and Ci not working after the installation of the driver from Bronya . Then i have delete the ATIRadeonX1000.kext - restart - the install again the driver from Bronya - and it works the 0x7280 with Qc and Ci on 10.5.1 . I hope it help you I tried this method on 10.5.1 with the leopard drivers 7280, but didn`t work for me still no qe and ci What is also really strange is Im getting a video card symbol in the centre of the screen showing my power connector is not connected when it is. Any ideas guys? Link to comment Share on other sites More sharing options...
Bronya Posted December 8, 2007 Author Share Posted December 8, 2007 1 post updated... If you update to 10.5.1 , driver replaced ... If no work QE/CI and OpenGL <-- The problem OpenGL.framework for Tiger ! You download OpenGL.framework for Tiger ! Reboot ! Link to comment Share on other sites More sharing options...
^kaneda Posted December 8, 2007 Share Posted December 8, 2007 intalled and ci and qe report running in system profiler, but it feels like they dnt, and opengl dont work anymore, even with the fixou posted, im with tiger .10 Link to comment Share on other sites More sharing options...
Kevin Email Posted December 8, 2007 Share Posted December 8, 2007 The new drivers work great too!! Link to comment Share on other sites More sharing options...
Recommended Posts