Shanems3 Posted October 15, 2007 Share Posted October 15, 2007 2 Xeon 3.2Ghz processors se7525GP2 intel motherboard 2gb ddr333 ram ati 1900gt (not working) sata dvd-rw (works like a champsata 160gb seagate (reads but very very slow) mac sees it as a ata , not sata SCSI Mac Card(not working yet) with 3 74gb hdds scsi SB 24bit sound card usb version (working out box) would installing the 10.4.5 atidrv.kext help any, i see that is an option on the install disk.. Link to comment Share on other sites More sharing options...
Scrizz Posted October 16, 2007 Share Posted October 16, 2007 what version are you on right now? Link to comment Share on other sites More sharing options...
Shanems3 Posted October 17, 2007 Share Posted October 17, 2007 trying t o install XxX 10.4.10 Link to comment Share on other sites More sharing options...
raulb Posted October 17, 2007 Share Posted October 17, 2007 Gergo I had the exact same issue you are facing. I resolved it by installing afresh, not just the drivers but the whole OS. First the Bronya drivers didn't work for me in XXX 10.4.10 whatever I did and I did try a lot. I had to use Uphuck and then use Pascal's 10.4.10 update. The sequence to get it working for me is install jccools driver, reboot and see if resolution is working, it usually is. Now to get QE and CI install Bronya's drivers, the latest ones posted on page 1. (If you have x1950pro and if you have x1950gt the drivers are different as is the process.) Now in XXX whenever I rebooted i would get the blue screen with mouse arrow. The same process with Uphuck 1.4.1R2 and Pascal Update 10.4.10 works perfectly. The permissions step is detailed in page one of this thread, also remember to use diskutility to repair permissions whenever you do a driver install. Link to comment Share on other sites More sharing options...
GERGÖ Posted October 17, 2007 Share Posted October 17, 2007 Do you have AGP x1950GT??The jccool driver is for XT isn't it? I'm tired from this whole s.ck. Link to comment Share on other sites More sharing options...
raulb Posted October 17, 2007 Share Posted October 17, 2007 No, I have Asus EAX 1950PRO PCI-E, your problems are probably related to AGP as lots of folks are facing issues with AGP, however Scrizz seems to be helping these folks out. Link to comment Share on other sites More sharing options...
GERGÖ Posted October 18, 2007 Share Posted October 18, 2007 I think so too.I decided to buy a complete new PC with compatible hardware. Link to comment Share on other sites More sharing options...
OlivDS Posted October 19, 2007 Share Posted October 19, 2007 Hi! Now many buils of leopard have been released, I was thinking if someone know if it natively suppport the x1950pro? Link to comment Share on other sites More sharing options...
mydograft Posted October 19, 2007 Share Posted October 19, 2007 Hi!Now many buils of leopard have been released, I was thinking if someone know if it natively suppport the x1950pro? I only got res change with jccool's 10.5 drivers,every thing else I tried did not end well,and I tried alot. Link to comment Share on other sites More sharing options...
OlivDS Posted October 20, 2007 Share Posted October 20, 2007 I only got res change with jccool's 10.5 drivers,every thing else I tried did not end well,and I tried alot. Well, let's hope Bronya will solve that problem soon Link to comment Share on other sites More sharing options...
hank hill Posted October 20, 2007 Share Posted October 20, 2007 Been trying all this stuff then it just occured to me (im running OSX in VMware wanted to see what works before I devote the whole system to it) Will any of this stuff work in Vmare ?? Link to comment Share on other sites More sharing options...
MacDaddyIRC Posted October 21, 2007 Share Posted October 21, 2007 Hey all just want to say HIS x1950 IceQ3 Turbo 256 AGP works 100% DVI > VGA installed X1950XT Installer 0.3 by Jccool then installed Ati_x1950GT_Pro by Bronya 10.4.9 Version dont know if Jccools installer did anything but seen others had done it so.. i could not get 10.4.10 to work tryed for 4 days. only got QE and CI to work with major mouse tearing no natit wold work. im on 10.4.8 says my card is PCI but how cras if it all works see image hope it helps edit: just installed ATI Drive From that post also works Link to comment Share on other sites More sharing options...
GERGÖ Posted October 21, 2007 Share Posted October 21, 2007 Hi! I couldn't 10.4.10 got work. Which 10.4.8 install did you use? Link to comment Share on other sites More sharing options...
Scrizz Posted October 21, 2007 Share Posted October 21, 2007 GMA 950 blows... Link to comment Share on other sites More sharing options...
beagio Posted October 21, 2007 Share Posted October 21, 2007 I only got res change with jccool's 10.5 drivers,every thing else I tried did not end well,and I tried alot.same here with my powercolor. hopefully someone will figure it out Link to comment Share on other sites More sharing options...
Krooval Posted October 22, 2007 Share Posted October 22, 2007 X1950 Pro 7280/1002 could not change res , qe / ci supported , but res = 1024*768 not 1920*1200 plz help! Link to comment Share on other sites More sharing options...
MacDaddyIRC Posted October 22, 2007 Share Posted October 22, 2007 Yeah i used JaS 10.4.8 try it worked for me Good luck Link to comment Share on other sites More sharing options...
mydograft Posted October 22, 2007 Share Posted October 22, 2007 X1950 Pro 7280/1002 could not change res , qe / ci supported , but res = 1024*768 not 1920*1200 plz help! Happened to me too (in 10.4.8),the way I got around it , is to install kalyway 10.4.10 (choosing the x1900 driver in the install), after the install my monitor is identified ,and I have res change,only after that I installed bronya's 10.4.10 (enabled qe/ci). the kalyway 10.4.10 has some bugs,read this thread for possible fixes. Link to comment Share on other sites More sharing options...
Shanems3 Posted October 22, 2007 Share Posted October 22, 2007 Happened to me too (in 10.4.8),the way I got around it , is to install kalyway 10.4.10 (choosing the x1900 driver in the install),after the install my monitor is identified ,and I have res change,only after that I installed bronya's 10.4.10 (enabled qe/ci). the kalyway 10.4.10 has some bugs,read this thread for possible fixes. i am gonna have to try bronya's way then.. i used 10.4.10 XxX disk on my dg965wh, and i get everything except for ci/qe. i guess kaly and XxX have the same bug. Link to comment Share on other sites More sharing options...
Bronya Posted October 22, 2007 Author Share Posted October 22, 2007 In me working driver 1950gt pro for leopard !!! Link to comment Share on other sites More sharing options...
VillaRosa Posted October 22, 2007 Share Posted October 22, 2007 Hi all, THIS IS DA REAL STUFF !! YEHA, YIPPIE, WHOOOAA!! You made my day, really. I have 10.4.8 installed (never change a running system :mellow: ), and had a X1600 working. I remember that I had to delete AGPart.kext to get the x1600 up. QE/CI is fully working now, together with dual screen (extended desktop), all resolutions and rotation with Saphire crossfire 1950pro (7280) using DVI to VGA adapters, just used your installer from the first post. I have no option to connect more than two displays right now and I do not own one of those fancy tft-displays, so what the hell is DVI ? But, both cards appear in the system profiler, so i think it should be possible to connect more than just two displays. Wish you the best, Micha For those who care, the Xbench: Quartz Graphics Test 193.36 Line 160.87 10.71 Klines/sec [50% alpha] Rectangle 201.44 60.14 Krects/sec [50% alpha] Circle 193.67 15.79 Kcircles/sec [50% alpha] Bezier 176.45 4.45 Kbeziers/sec [50% alpha] Text 259.92 16.26 Kchars/sec OpenGL Graphics Test 199.27 Spinning Squares 199.27 252.78 frames/sec User Interface Test 496.52 Elements 496.52 2.28 Krefresh/sec Link to comment Share on other sites More sharing options...
Shanems3 Posted October 22, 2007 Share Posted October 22, 2007 In me working driver 1950gt pro for leopard !!! what?? lol.... if you dont mind can you add dev id 724b and 726b in ur installer.. that is for the 1900gt.. i can test it out for you if you need a gunnie pig... Link to comment Share on other sites More sharing options...
beagio Posted October 23, 2007 Share Posted October 23, 2007 In me working driver 1950gt pro for leopard !!!then you will be a star for a second time Link to comment Share on other sites More sharing options...
raulb Posted October 23, 2007 Share Posted October 23, 2007 Bronya, I thought you had x1950pro? I hope us x1950pro owners are going to get drivers for Leopard too. Link to comment Share on other sites More sharing options...
Bronya Posted October 25, 2007 Author Share Posted October 25, 2007 Yes work driver ati on 10.5 9a527 and 9a581 ! Link to comment Share on other sites More sharing options...
Recommended Posts