Carnag Posted September 26, 2007 Share Posted September 26, 2007 Hi Bronya, how is it going with new drivers? THX Link to comment Share on other sites More sharing options...
Scrizz Posted September 26, 2007 Share Posted September 26, 2007 Hi, Scrizz Thank you. I have tried it, but get same result. Try my installer in post #362 IT's for x1950GT Link to comment Share on other sites More sharing options...
JerryT Posted September 28, 2007 Share Posted September 28, 2007 Thank You Scrizz!! and Bronya!! for all your time and help. Using the Scrizz installer I was able to get QE/CI Rotation with a Sapphire x1950pro Pcix 512meg. I deleted all the ATI, Nvidia, and Intel kexts from the extensions folder (including two hidden in a folder AppleNDRVR). I ran the Scrizz installer and everything works now. After pulling my hair out for several days I am back to glueing it back in. Asus P5B Premium Vista 2 gig memory Intel Core2 duo e6600 2.4 ghz OS: Jas Mac OSX 10.4.9 + koolkal 10.4.10 update, Windows XP, Windows Vista Ultimate Darwin 8.10.1 Link to comment Share on other sites More sharing options...
dorkbeerdad Posted September 29, 2007 Share Posted September 29, 2007 woohoo! thanks for all the good work you guys did, I have QE and CI enabled on my Powercolor x1950 pro 256MB Extreme! DVI doesn't work, but what the heck, i can now use iMovie! Hackintoshes rule! used the ATI_X1950PRO_Driver.dmg file to install. Specs: AMD64x2 3600+ MSI K9n_neoF 1 GB Kingston Value ddr2-533 200gb maxtor PATA HEC475W Psu Link to comment Share on other sites More sharing options...
aznracer Posted September 29, 2007 Share Posted September 29, 2007 It works great now...no mouse tearing and it reads all of the 512MB. The OpenGL is still kinda bad with frame rates only 1/3 of Vista. Link to comment Share on other sites More sharing options...
kszo Posted September 29, 2007 Share Posted September 29, 2007 x1950gt installer Good job! I installed this drivers and works very well! Got 1280x1024, full resolution for a 17" flat monitor. Got the CI/QE working perfectly. Now I can use Front Row and everything! The only thing is with the dual monitor settings. I got a PCI-E Sapphire X1950Pro 512MB card with 2 DVI out puts. I have 2 DVI monitors but it doesn't recognize the second one. Wondering why because on System Profiler I got 2 devices. When I disconnect and re-connect the second monitor the first monitor fades out and come back like trying to say that it recongnize a new monitor but then nothing happens... Has someone got dual DVI with CI/QE on a PCI-E X1950Pro? ATI Radeon X1950 Series: Chipset Model: ATI Radeon X1950 Series Type: Display Bus: PCIe VRAM (Total): 512 MB Vendor: ATI (0x1002) Device ID: 0x7280 Revision ID: 0x009a ROM Revision: 11x-4e2503SA-002 Displays: SyncMaster: Resolution: 1280 x 1024 @ 60 Hz Depth: 32-bit Color Core Image: Supported Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported Rotation: Supported Display: Status: No display connected ATI Radeon X1950 Series Secondary: Chipset Model: ATI Radeon X1950 Series Secondary Type: Display Bus: PCIe Vendor: ATI (0x1002) Device ID: 0x72a0 Revision ID: 0x009a ROM Revision: 11x-4e2503SA-002 Displays: Display: Display: Link to comment Share on other sites More sharing options...
erikk Posted September 29, 2007 Share Posted September 29, 2007 Have to change for my msi x1950 product id to 7244 and now my system works. dual screen 2 x 30" dell with 2 x 2560 x 1600 pixel!!!!!!! YEAH!!!! os 10.4.9. with 8.9.1 kernel Link to comment Share on other sites More sharing options...
Carnag Posted September 29, 2007 Share Posted September 29, 2007 Hi,I have the same result. I have also 30" lcd (samsung 305T) but I can't switch to 2560x1600 p resolution and dual lcd support is just a dream.ATI Radeon X1950 Series:Chipset Model: ATI Radeon X1950 SeriesType: DisplayBus: PCIeVRAM (Total): 512 MBVendor: ATI (0x1002)Device ID: 0x7280Revision ID: 0x009aROM Revision: 11x-4e2503SA-002Displays:SyncMaster:Resolution: 1280 x 1024 @ 60 HzDepth: 32-bit ColorCore Image: SupportedMain Display: YesMirror: OffOnline: YesQuartz Extreme: SupportedRotation: SupportedDisplay:Status: No display connectedATI Radeon X1950 Series Secondary:Chipset Model: ATI Radeon X1950 Series SecondaryType: DisplayBus: PCIeVendor: ATI (0x1002)Device ID: 0x72a0Revision ID: 0x009aROM Revision: 11x-4e2503SA-002Displays:Display:Display: C.Have a look. Link to comment Share on other sites More sharing options...
Scrizz Posted September 30, 2007 Share Posted September 30, 2007 @carnar: you need to use the x1950pro installer Link to comment Share on other sites More sharing options...
Carnag Posted September 30, 2007 Share Posted September 30, 2007 @carnar:you need to use the x1950pro installer Hi, I have used this installer - but I dosn't work. New driver 17.09.2007 !!! DEV_ID_7280 --> http://rapidshare.com/files/56461084/Ati_x...GT_Pro.mpkg.zip I have this MAC OS rsl uphuck 10.4.9 Install DVD v1.4i R3 Link to comment Share on other sites More sharing options...
Scrizz Posted September 30, 2007 Share Posted September 30, 2007 might be b/c it's 512 Link to comment Share on other sites More sharing options...
Carnag Posted October 1, 2007 Share Posted October 1, 2007 might be b/c it's 512 Could anybody fix it? Link to comment Share on other sites More sharing options...
kszo Posted October 1, 2007 Share Posted October 1, 2007 I tried both http://rapidshare.com/files/56461084/Ati_x...GT_Pro.mpkg.zip http://rapidshare.com/files/58005717/x1950...taller.mpkg.zip QE/CI and Rotation Supported but no dual configurations. I got a ATI Radeon X1950 Series Secondary, Device ID:0x72a0 but it doesn't recognize my display. How people can get that ATI display manager? Link to comment Share on other sites More sharing options...
davewolfs Posted October 1, 2007 Share Posted October 1, 2007 Could someone be kind enough to post the essential step by steps to get a machine running from scratch with an ATI x1950 PRO. I am a little confused, when I first install will I even get video on my screen? How are you able to add in the new drivers if the video doesn't work to begin with? Link to comment Share on other sites More sharing options...
Kevin Email Posted October 1, 2007 Share Posted October 1, 2007 UPDATE2: It says Qe/CI is working but not getting any video out of DVD player/Screen Saver. Still researching. UPDATED : I just got QE/CI working with the XxX_OS_x86_10.4.10_Install_Disc release Here is what I did 1) Remove all the old stuff (ATI*,Natit.kest,NV*,Geforce*, you get the idea) 2) Install Jccool's New release of for the 1950XT for 10.4.10 - Do Not reboot (You can but will not be working yet) 3) With Pacifist Install from 17th release for ATI_x1950GT_Pro.mpkg all the files EXCEPT ATINDRV.kext 4)Before rebooting run (I know it is overkill but I like being safe) sudo -s #Build echo ------------Set Permissions After Extenions Change------------------ sudo chown -R root:wheel /System/Library/Extensions/ sudo chmod -R 755 /System/Library/Extensions/ sudo touch /System/Library/Extensions sudo rm -R /System/Library/Extensions.kextcache sudo rm -R /System/Library/Extensions.mkext sudo rm -R /System/Library/Caches/com.apple.kernelcaches sudo kextcache -k -z /System/Library/Extensions echo -----------Running DiskUtil----- sudo diskutil repairPermissions / 5) Reboot and be happy. Still do not have Dual Monitor Support but I like being back at functioning. NOTE: It still only recognizes 256 MB of my 512MB PCIE 1950Pro but that will be for another day of fiddling. Now If I can just stop playing with the new releases and stick to one. Link to comment Share on other sites More sharing options...
knobsi Posted October 1, 2007 Share Posted October 1, 2007 ahoi together, i was spending a lot of time in reading this great thread.... up and down. for me it feels really sure to risk in spending money into a new graphic card for my rig. but the question is which one? i would like to buy a " 512MB Sapphire Radeon RX1950GT T2xD PCIe LiRe "..... but will it it run for 1680x1050 wit qe & ci support seperately on 2 dvi ports ( no vga adapters ) for my 2 screens ? and what about major appz like motion3 or maya 2008? will they work with it without any probs? what would you say? i really don´t know right now !! ( maybe spent too much time with this thread ) greetz.... knobsi Link to comment Share on other sites More sharing options...
raulb Posted October 2, 2007 Share Posted October 2, 2007 Hi All, I just ran Cinebench 10 GL benchmark on the new driver posted by Bronya and on my Windows XP system. The card is Asus EAX 1950PRO 256MB PCI-E. XPSP2: 4600 OSX Bronya: 3442 Is there anything that can be done to reduce the gap between the 2 systems. Edit: Also used the cross-platform Open GL benchmarking and info tool GLViewer 2.31 from realtech-vr.com to benchmark in both XP and OSX. Here are the results: 800X600X32@60HZ Test 1.1 Texturing XP:3510 OSX: 2567 1.2 Locked Array XP: 3420 OSX: 2506 1.3 Multitexture XP: 3315 OSX: 2474 1.4 Vertex Programs XP: 3066 OSX: 2363 1.5 Vertex Objects XP: 3081 OSX: 2368 2.0 Shading Language XP: 2907 OSX: 2245 2.1 Pixel Buffer Object Not Tested/Supported Now strangely for the same tests with Multisample=4, Fog=ON and Anisotrophy=16 the results change to OSXs favour dramtically: Test 1.1 Texturing XP: 866 OSX: 2083 1.2 Locked Array XP: 820 OSX: 2036 1.3 Multitexture XP: 809 OSX: 1987 1.4 Vertex Programs XP: 783 OSX: 1918 1.5 Vertex Objects XP: 766 OSX: 1920 2.0 Shading Language XP: 370 OSX: 1837 2.1 Pixel Buffer Object Not Tested/Supported Can anyone explain this? Weird. Link to comment Share on other sites More sharing options...
relent311 Posted October 2, 2007 Share Posted October 2, 2007 Can anyone help me get my x1950pro AGP to work? I have it connected to a dell 30" monitor so i definatly need to get up to 2560x1600 for it to look right. Ive tried installing the drivers from jjcool and when i get to the part right past the grey apple screen the monitor goes black and i cant get it back so i have to reload the os. I tried bronya drivers too and the same thing happens. I am using the JAS 10.4.8 build. Thanks for any help! Link to comment Share on other sites More sharing options...
nikeita Posted October 2, 2007 Share Posted October 2, 2007 Hi All, I just ran Cinebench 10 GL benchmark on the new driver posted by Bronya and on my Windows XP system. The card is Asus EAX 1950PRO 256MB PCI-E. XPSP2: 4600 OSX Bronya: 3442 Is there anything that can be done to reduce the gap between the 2 systems. Edit: Also used the cross-platform Open GL benchmarking and info tool GLViewer 2.31 from realtech-vr.com to benchmark in both XP and OSX. Here are the results: 800X600X32@60HZ Test 1.1 Texturing XP:3510 OSX: 2567 1.2 Locked Array XP: 3420 OSX: 2506 1.3 Multitexture XP: 3315 OSX: 2474 1.4 Vertex Programs XP: 3066 OSX: 2363 1.5 Vertex Objects XP: 3081 OSX: 2368 2.0 Shading Language XP: 2907 OSX: 2245 2.1 Pixel Buffer Object Not Tested/Supported Now strangely for the same tests with Multisample=4, Fog=ON and Anisotrophy=16 the results change to OSXs favour dramtically: Test 1.1 Texturing XP: 866 OSX: 2083 1.2 Locked Array XP: 820 OSX: 2036 1.3 Multitexture XP: 809 OSX: 1987 1.4 Vertex Programs XP: 783 OSX: 1918 1.5 Vertex Objects XP: 766 OSX: 1920 2.0 Shading Language XP: 370 OSX: 1837 2.1 Pixel Buffer Object Not Tested/Supported Can anyone explain this? Weird. did you notice any change in the quality of render (fog, anti-alias) during osx test? there were to little impact with fog and antialias on. that is strange. Link to comment Share on other sites More sharing options...
raulb Posted October 3, 2007 Share Posted October 3, 2007 Nikeita, I actually didn't look out too carefully for that. Will do another pass and see. Link to comment Share on other sites More sharing options...
beagio Posted October 3, 2007 Share Posted October 3, 2007 has anyone had any luck running a x1950Pro? i can get full resolution using jccools method, but i'm without QE/CI. Link to comment Share on other sites More sharing options...
e-ghost Posted October 4, 2007 Share Posted October 4, 2007 Hi all Children!At last I have made AtiradeonX1000.kext and ATY_Alopias! Full works QE/CI/OpenGL/Rotation/ on dual DVI !!! I did not check DUAL Monitor ! You try! Enjoy! New driver 17.09.2007 !!! DEV_ID_7280 --> http://rapidshare.com/files/56461084/Ati_x...GT_Pro.mpkg.zip ATI_ID_7288.zip in kernel panic; New ATI_ID_7288 work --> Enjoy! Hi Bronya, I want to know that for the driver on Post #1, are they for 10.4.9 or only work on 10.4.10? Because I see you have posted driver for 10.4.10 on http://forum.insanelymac.com/index.php?sho...mp;#entry434746 already but Post #1 hasn't specified. I am using uphuck v1.3 and it comes with 10.4.9. Do I need to update to 10.4.10 before using the driver on Post #1? (because I got error to boot in the OSX) My card is a PCI-E 256M 1950GT with 2 DVI output The result I got are: 1) if with ATI_7288.zip, ATINDRV and Natit, OSX recognizes it as 1950GT and support full resolution 1440x900 and rotation, but no QE/CI. (In the first display, it will said 'Status: No Display Connected'. at the bottom) 2) if I remove Natit, the card was not recognized at all. 1024x768 without QE/CI/rotation. No kernel panic or blue screen So I guess Natit from Scrz is working correctly. But how come I can't get ATI driver working as fellows in here? What did I missed? (I have the ATINDRV from uphuck v1.3 but replaced the ATY_Alopias by Bronya. Is the ATY_Alopias the key component to get QE/CI works through DVI? If the system can't even recognize the card model, which part is most likely doing work? Also, where should I establish ATY_Alopias.kext.zip? a) /system/library/extensions/atindrv.kext/contents/plugins/ (Post #1) /system/library/extensions/ (Post #357) Thanks a lot! Link to comment Share on other sites More sharing options...
Bronya Posted October 5, 2007 Author Share Posted October 5, 2007 Hi all ! Problems "blue screen" <- the problem opengl.framework and wrong version driver Post 1 updated ! Here driver for 10.4.10 !!! e-ghost, yep aty_alopias.kext in /system/.../atindrv.kext/contents/plugins/ Enjoy . Link to comment Share on other sites More sharing options...
Kevin Email Posted October 5, 2007 Share Posted October 5, 2007 That Worked a treat on my XxX 10.4.10 install. But there was no Natit.kext and it saw the card as "generic VGA". I then installed just the Natit.kext from your 10.4.9 and my 512 MB PCIE card was detected as a 256 1950Pro but I now have resolution change (All While Q/C working). The only thing not working is mirroring and extended displays!!! Thanks! Hi all !Problems "blue screen" <- the problem opengl.framework and wrong version driver Post 1 updated ! Here driver for 10.4.10 !!! e-ghost, yep aty_alopias.kext in /system/.../atindrv.kext/contents/plugins/ Enjoy . Link to comment Share on other sites More sharing options...
schneeleopard Posted October 5, 2007 Share Posted October 5, 2007 You are the best! The new Version works with my Saphire x1950 Pro! Love you so much :) Gafuliz Link to comment Share on other sites More sharing options...
Recommended Posts