Jump to content

Work x1950gt pro ! Dev_ID = 0x72801002 and 0x72881002 !

Bronya

By Bronya,
in ATi

 Share
1,886 posts in this topic

Recommended Posts

Bronya
Bronya
Posted
  • Author
Posted
i edit natit with my dev id and with de secondary display id but then nothing change (it doesnt read the edid of the lcd anymore just that... ) i edit the atix1000 kext with the secondary id and then i get a kernel panic... what else i should try to edit?

I do not understand! At you 7288? If works QE/CI is well! Then delete all natit.kext and atindrv.kext! Take atindrv.kext original and natit.kext from jccool!

 

Then we write in terminal:

sudo -s

chown -R 0:0 /system/library/extensions

chmod -R 75 /system/library/extensions

kextcache -k -z /system/library/extensions !

Reboot !

 

There are no problems!

Link to comment
Share on other sites
oiasdas
oiasdas
Posted
Posted

I think the problem is that the AGP cards are not working nearly as well as the PCIe cards. I tried for several days to get my AGP x1950pro working, and I did, kinda. All I could do was get QE/CI enabled. I couldn't get it to recognize AGP instead of PCI, couldn't get dual monitors working, couldn't get mouse tearing fixed completely.

 

For those reasons I reinstalled my 6600gt which is working perfectly. I sure hope that someone figures out how to get the sapphire x1950pro 512 AGP working, cause I would love to use it instead of the 6600gt.

Link to comment
Share on other sites
krell
krell
Posted
Posted
Finaly It's WORKING!

AGP/DVI/CI/QE :D

 

But still poor result in Xbench QE test! :(

               XBench Results:	29.78 (:	
System Info		
	Xbench Version		1.3
	System Version		10.4.9 (8P2137)
	Physical RAM		4096 MB
	Model		ADP2,1
	Drive Type		Maxtor 6Y080P0
CPU Test	74.31	
	GCD Loop	130.59	6.88 Mops/sec
	Floating Point Basic	76.60	1.82 Gflop/sec
	vecLib FFT	47.38	1.56 Gflop/sec
	Floating Point Library	83.25	14.50 Mops/sec
Thread Test	79.99	
	Computation	62.09	1.26 Mops/sec, 4 threads
	Lock Contention	112.39	4.84 Mlocks/sec, 4 threads
Memory Test	118.01	
	System	113.81	
		Allocate	117.95	433.15 Kalloc/sec
		Fill	122.19	5941.15 MB/sec
		Copy	103.11	2129.77 MB/sec
	Stream	122.53	
		Copy	110.81	2288.80 MB/sec
		Scale	113.42	2343.27 MB/sec
		Add	136.08	2898.70 MB/sec
		Triad	134.13	2869.29 MB/sec
Quartz Graphics Test	21.40	
	Line	27.23	1.81 Klines/sec [50% alpha]
	Rectangle	10.86	3.24 Krects/sec [50% alpha]
	Circle	16.75	1.37 Kcircles/sec [50% alpha]
	Bezier	65.97	1.66 Kbeziers/sec [50% alpha]
	Text	33.34	2.09 Kchars/sec
[b]OpenGL Graphics Test	70.84[/b]	
	Spinning Squares	70.84	89.86 frames/sec
User Interface Test	8.18	
	Elements	8.18	37.54 refresh/sec
Disk Test	57.18	
	Sequential	94.29	
		Uncached Write	99.70	61.22 MB/sec [4K blocks]
		Uncached Write	106.22	60.10 MB/sec [256K blocks]
		Uncached Read	70.88	20.74 MB/sec [4K blocks]
		Uncached Read	112.73	56.66 MB/sec [256K blocks]
	Random	41.03	
		Uncached Write	14.45	1.53 MB/sec [4K blocks]
		Uncached Write	114.17	36.55 MB/sec [256K blocks]
		Uncached Read	81.98	0.58 MB/sec [4K blocks]
		Uncached Read	136.22	25.28 MB/sec [256K blocks]

 

 

XBench from mine: Dell 8300 P4 3.2 HT, 2G DDR, 800FSB, 1950Pro AGP 256M

 

Results	75.04	
System Info		
	Xbench Version		1.3
	System Version		10.4.8 (8L2127)
	Physical RAM		2048 MB
	Model		ADP2,1
	Drive Type		Maxtor 6L160P0
CPU Test	58.57	
	GCD Loop	93.03	4.90 Mops/sec
	Floating Point Basic	53.62	1.27 Gflop/sec
	vecLib FFT	43.00	1.42 Gflop/sec
	Floating Point Library	63.96	11.14 Mops/sec
Thread Test	103.16	
	Computation	81.14	1.64 Mops/sec, 4 threads
	Lock Contention	141.61	6.09 Mlocks/sec, 4 threads
Memory Test	104.40	
	System	91.63	
		Allocate	66.72	245.01 Kalloc/sec
		Fill	127.36	6192.51 MB/sec
		Copy	101.02	2086.56 MB/sec
	Stream	121.31	
		Copy	111.68	2306.62 MB/sec
		Scale	111.83	2310.27 MB/sec
		Add	133.20	2837.54 MB/sec
		Triad	132.14	2826.71 MB/sec
Quartz Graphics Test	59.84	
	Line	63.63	4.24 Klines/sec [50% alpha]
	Rectangle	49.18	14.68 Krects/sec [50% alpha]
	Circle	47.59	3.88 Kcircles/sec [50% alpha]
	Bezier	81.82	2.06 Kbeziers/sec [50% alpha]
	Text	70.03	4.38 Kchars/sec
OpenGL Graphics Test	116.11	
	Spinning Squares	116.11	147.29 frames/sec
User Interface Test	59.98	
	Elements	59.98	275.29 refresh/sec
Disk Test	66.90	
	Sequential	118.07	
		Uncached Write	133.85	82.18 MB/sec [4K blocks]
		Uncached Write	122.04	69.05 MB/sec [256K blocks]
		Uncached Read	93.51	27.37 MB/sec [4K blocks]
		Uncached Read	133.01	66.85 MB/sec [256K blocks]
	Random	46.68	
		Uncached Write	17.30	1.83 MB/sec [4K blocks]
		Uncached Write	118.97	38.09 MB/sec [256K blocks]
		Uncached Read	90.01	0.64 MB/sec [4K blocks]
		Uncached Read	119.33	22.14 MB/sec [256K blocks]

Link to comment
Share on other sites
THe KiNG
THe KiNG
Posted
Posted
What for to you AGPGart.kext??? If at you x1950 AGP you should delete AGPGart.kext and edit in folder /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/ file Configuration.plist, there find "IOPCIDevice" - replace on IOAGPDevice and keep, repair permissions! Also check up!

There is no point..it's already set to IOAGPDevice(not by me)... :)

If I remove agpgart.kext there is no way to get in systemprofiller agp instead pci...(I do what you say in other post with no luck)

In general, what for you look on Xbench??? Play games and enjoy! And Xbench it can appear a mistake!

I don't know if what i do is ok..this is the reason to use xbench...to see if i get any progress... that results i get is for 9600 not for x1950 PRO!

You say xbench can be wrong? Please elaborate..

for my agp friends I have this special package:

Attached File Natit.agp.zip ( 46.33K ) Number of downloads: 4

Not working...krenell panic..maybe you can explain better... :)

 

This is my rig...maybe help's...

 

AMD X2 Opteron 165 @ 2.25 FSB 250

4 GB DDR 400 Qimonda(Infineon)

Gigabyte nforce3 ultra

1x WD Raptor 36 GB Windows

1x Maxtor 80 GB Mac OS X

2x WD 250 GB Raid 0 windows(if you know how i can use it in osx please let me know)

1x WD 400 GB

1x Seagate 80 GB external usb rack

 

Offtopic:

Also I'm pretty sure something is wrong in my install or drivers because for ex: i try to use volume logic on itunes but what i get is sound noise, without him sound is good... same result with jass 10.4.8, tubgirl 10.4.10, and current uphuck 10.4.9 v4aO...any idea ?

On my T2400 intel laptop is working.... ;)

Link to comment
Share on other sites
Kilokal
Kilokal
Posted
Posted

I've tried the first driver on my pc with a x1950 pro 256 MB PCI-E on a jas 10.4.8. If I use the DVI > Vga adapter, it works. If I don't use the adapter instead, I have no output on my LCD. There's a way to make the driver works also with DVI connector without adapter?

 

Thanks :D

Link to comment
Share on other sites
Bronya
Bronya
Posted
  • Author
Posted
There is no point..it's already set to IOAGPDevice(not by me)... :) If I remove agpgart.kext there is no way to get in systemprofiller agp instead pci...(I do what you say in other post with no luck)I don't know if what i do is ok..this is the reason to use xbench...to see if i get any progress... that results i get is for 9600 not for x1950 PRO!You say xbench can be wrong? Please elaborate.. Not working...krenell panic..maybe you can explain better... :DThis is my rig...maybe help's...AMD X2 Opteron 165 @ 2.25 FSB 2504 GB DDR 400 Qimonda(Infineon)Gigabyte nforce3 ultra1x WD Raptor 36 GB Windows1x Maxtor 80 GB Mac OS X2x WD 250 GB Raid 0 windows(if you know how i can use it in osx please let me know)1x WD 400 GB1x Seagate 80 GB external usb rackOfftopic:Also I'm pretty sure something is wrong in my install or drivers because for ex: i try to use volume logic on itunes but what i get is sound noise, without him sound is good... same result with jass 10.4.8, tubgirl 10.4.10, and current uphuck 10.4.9 v4aO...any idea ?On my T2400 intel laptop is working.... :D
At you nforce3 is normally, it is better nforce4 <-more strongly!xbench normally defines, simply there are mistakes because of reading hard disk .
I've tried the first driver on my pc with a x1950 pro 256 MB PCI-E on a jas 10.4.8. If I use the DVI > Vga adapter, it works. If I don't use the adapter instead, I have no output on my LCD. There's a way to make the driver works also with DVI connector without adapter?Thanks :D
At me it has not turned out on DVI, works only through VGA.
Link to comment
Share on other sites
user248023
user248023
Posted
Posted

Hey someone want to answer this for me. I got my x1950 pro today and realized the power cable does not connect to my mac. I found one on the internet that will connect it (its apples cable they send with special ordered x1900) Is there any place to connect the 4 pin powercable so I dont have to order this other cable.

 

 

Also

 

 

If I flash this thing to os x will I be able to use it in windows still?

Link to comment
Share on other sites
beagio
beagio
Posted
Posted

Bronya, you are a star!

 

i have a PowerColour x1950 Pro 256MB PCIe, running 1680x1050 on a 22" Samsung SyncMaster, now with full QE/CI support. the only thing i can't comment on is the other DVI port, as i only have one screen :)

 

for those interested, as someone with the exact same card as me mentioned that he kept Jccool's ATINDRV.kext i decided to play safe and do the same. apart from that, all i did was copy over Bronya's files, delete all the other ATI*.* files, remove kext.cache, repair permissions and then reboot. worked like a charm :)

 

once again, thank you very much.

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...