Jump to content

Work x1950gt pro ! Dev_ID = 0x72801002 and 0x72881002 !

Bronya

By Bronya,
in ATi

 Share
1,886 posts in this topic

Recommended Posts

ashmcleod
ashmcleod
Posted
Posted
Anybody experiencing mouse tearing after installing the kexts? Any fix?

 

I'm getting the same problem. And after changing my resolution to 1440x900x32 in the com.apple.Boot.plist my resolution changes to 1152x864 after reboot, any ideas?

Link to comment
Share on other sites
frEEki
frEEki
Posted
Posted

yeah.. sounds like what i was looking for!!

 

Only Problem.. i am quite a noob.

 

I am going to do a clean new install of osx tomorrow. Dont know if its going to be 10.4.8 or uphook 10.4.9.

 

Just bought myself a p35-DS3 board and a 6650 C2D so i have to test with version installs best.

 

Can anyone around here give me a step by step walkthrough for getting my x1950pro running (incl. the needed drivers?) That would be awesome!

 

I allready had it running with an old 6600GT AGP but since i have a more powerfull card lying around i want to use this one!

 

So... if anyone can help me that would be very nice. I guess many ppl could use such a guide too!

 

regards

MS

Link to comment
Share on other sites
Bronya
Bronya
Posted
  • Author
Posted
This method worked for me with no ATI Displays installed. I had a hell of a time getting anything over DVI or VGA before installing jccools driver. I think it wasn't recognizing my LCD properly.

 

1. Install jccools, reboot into non CI/QE mode over DVI, change resolution.

2. Overwrite all extensions with Bronya's extensions except for ATINDRV.kext, reboot.

3. It just works, even DVI!

 

This is with an 7280 id Ati Radeon 1950 Pro 256mb on PCI-E, running a fresh install of Tub's 4.10 Test1.

 

Bronya you are a star for getting this working. I've held back on running OSX on my system because of the poor video performance playing videos and such at 1680x1050. I can finally start using OSX every day.

 

I tried as you have made it - double display works for me through DVI, but does not work qe/ci, works only rotation!

I tried all of the driver:

1) Inside atindrv.kext 4 drivers lay - ATY_Alopias , Aty_Caretta, etc.

2) ATY_Alopias.kext is works DVI, but does not work QE/CI!

3) ATY_Caretta.kext - does not work both VGA and DVI - there is no signal!

4) ATY_Sphyrna.kext - too does not work!

5) ATY_Wormy.kext - works QE/CI and shows through VGA! Through DVI does not show, there is no signal!!!

 

So it is necessary to code, that worked through DVI !

 

Me interests that works for others through DVI.

 

What it " Tub's 4.10 Test1 "? Thanks!

Link to comment
Share on other sites
Polymere
Polymere
Posted
Posted

Here, I get a 1280x1024 display on dvi output (no GE/CI) and a "blue" screen with mouse pointer on VGA out. (Only one of eatch connected).

 

Have a Saphire X1950 Pro 512Mo AGP. (7280/009a)

 

With two monitors connected, got nothing on VGA output.

 

I install jccool method then apply files from Scizz.

 

Any idea ?

 

Polymere

Link to comment
Share on other sites
Bronya
Bronya
Posted
  • Author
Posted
so wormy would work through dvi>vga dual screens?
Nope ! One works only DVI> VGA!
Here, I get a 1280x1024 display on dvi output (no GE/CI) and a "blue" screen with mouse pointer on VGA out. (Only one of eatch connected).Have a Saphire X1950 Pro 512Mo AGP. (7280/009a)With two monitors connected, got nothing on VGA output.I install jccool method then apply files from Scizz.Any idea ?Polymere
You should download natit.kext and atindrv.kext original ! Take here this Natit.kext.zip ! Work only one DVI>VGA and QE/CI !
Link to comment
Share on other sites
Polymere
Polymere
Posted
Posted

I get ATINDRV from the Upunck 1.3 DVD 10.4.9.

Strange, after install Natit, at reboot I get trashed screen on VGA only. When I use DVI I get a message on finder that the "natit.kext" can't run correctly but I have QE/CI enabled.

I remove it and QE/CI continue to work on DVI!

The display is cloned on the 2 video output (VGA).

 

I notice some display "bug" under mouse pointer. Finder look like unstable when I unmout 2 volumes quicky (no gfx issue I think).

 

I force start on 1280x1024 and it look fine.

If there is a solution for gfx bug under mouse pointer.

 

Thanks for your help.

 

/me happy to see same result than on his iBook G4 :D

Link to comment
Share on other sites
Bronya
Bronya
Posted
  • Author
Posted

For me now work 2 DVI> 2 vga! Two monitors Work! It later.

 

Polymere, you should edit correctly natit.kext that worked resolution through dvi! Try to do it independently.

You should register the rights for natit.kext!

Link to comment
Share on other sites
frEEki
frEEki
Posted
Posted

oh Yeah!!!

 

i got it running!!!! THANX A LOT!!!

 

Only Problem i have now is that i cant change the resolution. Its allways set to 1400x1050.

 

i even edited com.apple.boot and set graphic mode to 1680x1050.

but it doesnt work...

 

does anyone have a clue how to fix that?

Link to comment
Share on other sites
MikeNL
MikeNL
Posted
Posted

hey guys, when i replaced the files in the ext. folder and did the Terminal things i rebooted and got a Blue screen that changes in 3 colors blue, but nothing happens further.. i don't know what to do next :S

Got a Club3d Ati Radeon 256MB 1950 PRO on 10.4.8 Semtex kernel

Link to comment
Share on other sites
^kaneda
^kaneda
Posted
Posted

i got a problem, with new drivers i get ci and qe but i cant manage res or brightness of the screen... and with jcool method i can manage it but dont have ci or qe... and with scrizz and with scrizz *zip for x1950gt 7288 i get ci but catn manage res or brightness... any idea?

Link to comment
Share on other sites
Bronya
Bronya
Posted
  • Author
Posted
oh Yeah!!!i got it running!!!! THANX A LOT!!!Only Problem i have now is that i cant change the resolution. Its allways set to 1400x1050.i even edited com.apple.boot and set graphic mode to 1680x1050.but it doesnt work...does anyone have a clue how to fix that?
There is a program "DisplayConfigX" which can to add resolution 1440x900 the monitor. Try search in google.com!
hey guys, when i replaced the files in the ext. folder and did the Terminal things i rebooted and got a Blue screen that changes in 3 colors blue, but nothing happens further.. i don't know what to do next :SGot a Club3d Ati Radeon 256MB 1950 PRO on 10.4.8 Semtex kernel
MikeNL,^kaneda, Register the rights in single user boot :

kextcache -k -z /system/library/extensions

Link to comment
Share on other sites
MikeNL
MikeNL
Posted
Posted
MikeNL,^kaneda[/b], Register the rights in single user boot :

kextcache -k -z /system/library/extensions

 

ok, i've done that, and when i get back to my 1950 istead of my 950 GMA i get the same blue screen, but with a mouse

Link to comment
Share on other sites
THe KiNG
THe KiNG
Posted
Posted

About AGPGart.kext

Whitout agpgart on boot screen i have found first Divice ID: 0x72A0 then the right one 0x7280 DVI/CI/QE/PCI mode but poor results in xbench on CI test, OpenGL is so good(AE and Photoshop CS3 recognize my OpenGL card)...

With agpgart(v.2.2) on boot screen i have found first Divice ID: 0x7280 then the wrong one 0x72A0, AGP set to 3.0 and freeze...no way without removing agpgart.kext :D

What is wrong?

Can I remove that wrong ID? How?

Please help..just a little bit closer...to final working vcard!

Thanks!

Link to comment
Share on other sites
Mafiose
Mafiose
Posted
Posted

can somebody help me?

 

i have Asus x1950 pro pcie Jas 10.4.8 i have copied 3 files from Bronya....after restart => kernel crash.

 

i want now update to 10.4.10 and after update install drives for GK.

you say the zip was broken? which files i need?

 

i want only 1280x1024 VGA and that my Gk work :D

Link to comment
Share on other sites
THe KiNG
THe KiNG
Posted
Posted

Finaly It's WORKING!

AGP/DVI/CI/QE :angel:

 

But still poor result in Xbench QE test! :(

 

snapshot20070811071032xf4.jpg

               XBench Results:	29.78 (:	
System Info		
	Xbench Version		1.3
	System Version		10.4.9 (8P2137)
	Physical RAM		4096 MB
	Model		ADP2,1
	Drive Type		Maxtor 6Y080P0
CPU Test	74.31	
	GCD Loop	130.59	6.88 Mops/sec
	Floating Point Basic	76.60	1.82 Gflop/sec
	vecLib FFT	47.38	1.56 Gflop/sec
	Floating Point Library	83.25	14.50 Mops/sec
Thread Test	79.99	
	Computation	62.09	1.26 Mops/sec, 4 threads
	Lock Contention	112.39	4.84 Mlocks/sec, 4 threads
Memory Test	118.01	
	System	113.81	
		Allocate	117.95	433.15 Kalloc/sec
		Fill	122.19	5941.15 MB/sec
		Copy	103.11	2129.77 MB/sec
	Stream	122.53	
		Copy	110.81	2288.80 MB/sec
		Scale	113.42	2343.27 MB/sec
		Add	136.08	2898.70 MB/sec
		Triad	134.13	2869.29 MB/sec
Quartz Graphics Test	21.40	
	Line	27.23	1.81 Klines/sec [50% alpha]
	Rectangle	10.86	3.24 Krects/sec [50% alpha]
	Circle	16.75	1.37 Kcircles/sec [50% alpha]
	Bezier	65.97	1.66 Kbeziers/sec [50% alpha]
	Text	33.34	2.09 Kchars/sec
[b]OpenGL Graphics Test	70.84[/b]	
	Spinning Squares	70.84	89.86 frames/sec
User Interface Test	8.18	
	Elements	8.18	37.54 refresh/sec
Disk Test	57.18	
	Sequential	94.29	
		Uncached Write	99.70	61.22 MB/sec [4K blocks]
		Uncached Write	106.22	60.10 MB/sec [256K blocks]
		Uncached Read	70.88	20.74 MB/sec [4K blocks]
		Uncached Read	112.73	56.66 MB/sec [256K blocks]
	Random	41.03	
		Uncached Write	14.45	1.53 MB/sec [4K blocks]
		Uncached Write	114.17	36.55 MB/sec [256K blocks]
		Uncached Read	81.98	0.58 MB/sec [4K blocks]
		Uncached Read	136.22	25.28 MB/sec [256K blocks]

 

This is what I did:

Clean instal Uphuck 10.4.9 v1.4a(no vga selected)

Install Jcool driver

Remove all Ati except atindrv.kext

Install remaining kext from Dimitrik pack

Remove kext.cache&repair permissions

Boot from Uphuck dvd again and install AGPGart.kext v2.1(cusom install)

DONE!

Still I don't understand why I have that bad results on XBench!

On my T2400 laptop with nVidia GO 7400/256 MB same Uphuck(intel) install I have much better results:

Quartz Graphics test: 123.35

OpenGL Graphics test: 117.64

Still it's an GO...Not X1950XT Pro...

What is wrong??

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...