lebidou Posted October 25, 2010 Share Posted October 25, 2010 After applying the SnowLeo grpahics update I get kernel panic in ATIRadeonX1000.kext. adding 0x72801002 to the list of supported Ids did not help.Any suggestions? More to patch? Thanks Joey PS I use the package from plan3r, which is really great except that I can't figure out how to survive this update... Hi, I had the same issue: hopefully, you have a backup of your kexts, so reinstall the pre-graphics update ones, (in theory, reapplying plan3r package should be fine). Link to comment Share on other sites More sharing options...
zaaherux Posted October 25, 2010 Share Posted October 25, 2010 Hi, I had the same issue: hopefully, you have a backup of your kexts, so reinstall the pre-graphics update ones, (in theory, reapplying plan3r package should be fine). I've just uploaded updated drivers after 10.6.4 graphics update. You can find them here: http://www.insanelymac.com/forum/index.php...t&p=1469651 Link to comment Share on other sites More sharing options...
Hunty Posted October 31, 2010 Share Posted October 31, 2010 I've just uploaded updated drivers after 10.6.4 graphics update. You can find them here:http://www.insanelymac.com/forum/index.php...t&p=1469651 e plan3r can u help me? i've an 1950pro, i'm trying to use your files but i've some problems. System is 10.6.4 with graphics update and pc efi 10.6 The system with your files has qe/ci active, full resolution (1920x120060hz) but when i'm browsing web pages the screen suddenly goes black and then turn normal. And when i'm trying to change resolution the screen goes to 480i mode and i can't change it. The only way to get back to 1600x1200 is to cancel your kext and reboot, but in this case i don't have qe/ci and resolution change. Can u help me? maybe i'm missing some files. Thanks Link to comment Share on other sites More sharing options...
ZPK Posted November 11, 2010 Share Posted November 11, 2010 work in 10.6.5? Link to comment Share on other sites More sharing options...
bigb1979 Posted November 13, 2010 Share Posted November 13, 2010 Someone tried 10.6.5. with those "Graphic Update" Driver ?!? Link to comment Share on other sites More sharing options...
schneeleopard Posted November 13, 2010 Share Posted November 13, 2010 Something new with 10.6.5? Link to comment Share on other sites More sharing options...
ZPK Posted November 13, 2010 Share Posted November 13, 2010 august version Graphic Update" ? -- work(after install driver...need install old R1000 )....10.6.5 do not know... Link to comment Share on other sites More sharing options...
zaaherux Posted November 13, 2010 Share Posted November 13, 2010 Just updated PRO and GT drivers for 10.6.5. http://www.insanelymac.com/forum/index.php...t&p=1469651 Link to comment Share on other sites More sharing options...
bigb1979 Posted November 13, 2010 Share Posted November 13, 2010 Just updated PRO and GT drivers for 10.6.5. http://www.insanelymac.com/forum/index.php...t&p=1469651 WOWOWOWOW Thank you so much !!!! Link to comment Share on other sites More sharing options...
colordeficiency Posted November 14, 2010 Share Posted November 14, 2010 just installed 10.6.3, can somebody tell me where does the 4 files go to? and what do i need in boot.plist? Link to comment Share on other sites More sharing options...
orionquest Posted November 15, 2010 Share Posted November 15, 2010 Thanks Plan3r!! I hope this resolves an issue I have had with the previous incarnation of these drivers before you came on board. Every once and a while I would get a blank screen or a garble screen while working on something is was completely random. Plus the occasional horizontal line. So far the test setup is looking good. Your work is appreciated!! Link to comment Share on other sites More sharing options...
orionquest Posted November 16, 2010 Share Posted November 16, 2010 Question for plan3r? Will this driver need to be updated for each patch after 10.6.5? Thanks, oq Link to comment Share on other sites More sharing options...
zaaherux Posted November 16, 2010 Share Posted November 16, 2010 Question for plan3r? Will this driver need to be updated for each patch after 10.6.5? Thanks, oq It depends. So this is how it works (or at least, worked so far). When Apple updates graphics drivers (via big system update or just graphics update as seen some time after 10.6.4) you can try using older driver (since it's independent of other kexts, it will not KP, but you get outdated driver) or get updated one. Driver files should be updated every single time original kexts change because there's some HEX editing involved to get CI/QE, but it could be possible to use older pathed driver again. As long as Apple keeps things simple, this is not a problem. Thanks Plan3r!! I hope this resolves an issue I have had with the previous incarnation of these drivers before you came on board. Every once and a while I would get a blank screen or a garble screen while working on something is was completely random. Plus the occasional horizontal line. So far the test setup is looking good. Your work is appreciated!! Just be sure to delete all other injectors/enablers from /System/Library/Extensions and /Extras, and use latest Chameleon RC5 with patched drivers and you should be good. Glitches can happen if you have physicaly bad card or cooling isn't good. Boot to Windows and check for artifacts under full load. Glad to help. Link to comment Share on other sites More sharing options...
Zahary Posted January 4, 2011 Share Posted January 4, 2011 Phew, it was a bumpy ride, but I finally managed to get my X1950Pro to work under Snow Leopard 10.6.5 The exact model of my card is 512MB Dual DVI AGP Saphire Radeon X1950 Pro http://www1.sapphiretech.com/id/products/p...d=168&grp=2 Currently, at start-up Natit.ext recognize it as ATY, Prionace (7280 vendor code) I've tried various methods including: * Installing the original Bronya 10a504 driver :: this resulted in screens painted in solid gray that strangely enough still featured a moving mouse cursor * Then I tried the minimal patching method proposed here: http://www.insanelymac.com/forum/lofiversi...hp/t223631.html which is also used in the recent prepackaged drivers uploaded by Plan3r http://goo.gl/mj1lb This method is reported to work by many users, but on my machine it resulted in gray screens (no mouse this time) I've tried it with or without the jaminmc extensions: http://goo.gl/qatKD * Finally, I noticed a recently uploaded driver for X1950GT that was based on the Bronya's stuff: http://www.kexts.com/view/721-ati_radeon_x...nly_10.6.5.html With some binary diff-ing and investigation I was able to produce a similar updated Bronya driver for 10.6.5, but for X1950Pro cards. QE/CI is enabled and there should be no difference in the final performance of the different methods since this driver still makes minimal modifications to the vanilla mac os extensions. * README: Download, unpack and run Install.command If anything goes wrong, boot in single user mode and execute Restore.command X1950_Bronya_10.6.5.zip Link to comment Share on other sites More sharing options...
ZPK Posted January 7, 2011 Share Posted January 7, 2011 how about 10.6.6 ? Link to comment Share on other sites More sharing options...
ontheset Posted January 11, 2011 Share Posted January 11, 2011 it didnt work for me....it did nothing. Phew, it was a bumpy ride, but I finally managed to get my X1950Pro to work under Snow Leopard 10.6.5 The exact model of my card is 512MB Dual DVI AGP Saphire Radeon X1950 Pro http://www1.sapphiretech.com/id/products/p...d=168&grp=2 Currently, at start-up Natit.ext recognize it as ATY, Prionace (7280 vendor code) I've tried various methods including: * Installing the original Bronya 10a504 driver :: this resulted in screens painted in solid gray that strangely enough still featured a moving mouse cursor * Then I tried the minimal patching method proposed here: http://www.insanelymac.com/forum/lofiversi...hp/t223631.html which is also used in the recent prepackaged drivers uploaded by Plan3r http://goo.gl/mj1lb This method is reported to work by many users, but on my machine it resulted in gray screens (no mouse this time) I've tried it with or without the jaminmc extensions: http://goo.gl/qatKD * Finally, I noticed a recently uploaded driver for X1950GT that was based on the Bronya's stuff: http://www.kexts.com/view/721-ati_radeon_x...nly_10.6.5.html With some binary diff-ing and investigation I was able to produce a similar updated Bronya driver for 10.6.5, but for X1950Pro cards. QE/CI is enabled and there should be no difference in the final performance of the different methods since this driver still makes minimal modifications to the vanilla mac os extensions. * README: Download, unpack and run Install.command If anything goes wrong, boot in single user mode and execute Restore.command Link to comment Share on other sites More sharing options...
e_November Posted January 11, 2011 Share Posted January 11, 2011 For x1950GT (id 7288) only 10.6.6 ATI_1950GT_10.6.6.zip Link to comment Share on other sites More sharing options...
bluluiSs Posted February 1, 2011 Share Posted February 1, 2011 Works GREAT! On Sapphire X1950PRO, Asus P5E with Snow Hazard 10.6.2. Link to comment Share on other sites More sharing options...
hundorten Posted February 14, 2011 Share Posted February 14, 2011 For Tiger 10.4.11 - ATI_X1950Pro_1011 deleted, please re-upload this Link to comment Share on other sites More sharing options...
xboxtreme Posted February 21, 2011 Share Posted February 21, 2011 I have an ATi Radeon X1950PRO 256 (7280) Does not work on 10.6.6 Does anyone have the kext? The kext of 10.6.5 does not work Thanks Link to comment Share on other sites More sharing options...
schneeleopard Posted February 27, 2011 Share Posted February 27, 2011 I'm interested too in this kext! Link to comment Share on other sites More sharing options...
foxman Posted March 3, 2011 Share Posted March 3, 2011 Here are my kexts for x1950 7280 working in the 32/64 bit under 10.6.6. 1. Use Chameleon 2.0 RC5 r700 by Kabyl with experimental ATI GraphicsEnabler support from [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 3.2. 2. In Chameleon control panel enable graphic support. 3. Instal kexts via KextHelper. reboot http://www.mediafire.com/?w7qkcxhhmv99h14 add:If you do not use graphic Enabler from chameleon, use Natit, or Evoenabler for display resolution. Link to comment Share on other sites More sharing options...
ChildOfInsanity Posted March 6, 2011 Share Posted March 6, 2011 x1950Pro 7280 - KP for your kexts with the Chameleon r700 by Kabyl. What card do you have? What do you mean by: "It should work with everything off grapgic enabler and use Natit, or Evoenabler for display resolution." Should I USE Natit or Evoenabler or NOT? Because I get it working in 32bit with natit with sleep, in 64bit I have QE/CI but no resolution and no sleep. Here are my kexts for x1950 7280 working in the 32/64 bit under 10.6.6. 1. Use Chameleon 2.0 RC5 r700 by Kabyl with experimental ATI GraphicsEnabler support from [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 3.2. 2. In Chameleon control panel enable graphic support. 3. Instal kexts via KextHelper. reboot http://www.mediafire.com/?w7qkcxhhmv99h14 add:It should work with everything off grapgic enabler and use Natit, or Evoenabler for display resolution. Link to comment Share on other sites More sharing options...
ZPK Posted March 22, 2011 Share Posted March 22, 2011 how about 10.6.7 ?) Link to comment Share on other sites More sharing options...
leopard69 Posted April 17, 2011 Share Posted April 17, 2011 how about 10.6.7 ?) Works for my Sapphire x1950Pro. After upgrading from 10.6.6 I just had to replace the AtiRadeonx1000 & Ati1900Controller Kexts with the ones linked in foxman's post (http://www.mediafire.com/?w7qkcxhhmv99h14) HTH Link to comment Share on other sites More sharing options...
Recommended Posts