uphuck Posted July 30, 2007 Share Posted July 30, 2007 hey everyone, v1.4a for AMD PC's is on its usual place.. @BigRussian63 yeah torrents.. Link to comment Share on other sites More sharing options...
BJMoose Posted July 30, 2007 Share Posted July 30, 2007 Excuse the noob question, but I keep hearing about getting this cool software from "... the usual places". But just where are the usual places? Are people talking about torrents? Thanks BR Think GREEN! Link to comment Share on other sites More sharing options...
shatterhenner Posted July 30, 2007 Share Posted July 30, 2007 am i blind????? AppleACPIPlatform.kext from 18.4.8 patch is missing in install setup on 1.4r2.... nothing to select??? anyone can confirm that??? wanna do some tests with the via 8233 chipset.... besides that...thanx uphuck for ya great work....youre the man..... Link to comment Share on other sites More sharing options...
JoeyKing Posted July 30, 2007 Share Posted July 30, 2007 I know it's totally off topic....but could someone send me a Demonoid invitation plz? PN or core_man_2000@gmx.de Thanx a lot Joey Link to comment Share on other sites More sharing options...
naddy69 Posted July 30, 2007 Share Posted July 30, 2007 @lennyb AppleMPIC.kext is a powerpc binary that you can not load it on any intel, so it has nothing to do on our pc's.. thank you for informations, i put 10.4.8 apic + acpiplatform as a package to choose and tested on my systems, it would be good if you test and make it clear that any other thing is needed or not.. I can confirm this. On my latest installs of 1.3 on my ThinkPad T41 laptops I did not copy the 10.4.6 AppleMPIC.kext, just the 10.4.6 AppleAPIC.kext. I already have 10.4.6 installed on these, so it's easy to copy over. MPIC is indeed a PPC kext and is not needed. Link to comment Share on other sites More sharing options...
cmayor Posted July 30, 2007 Share Posted July 30, 2007 1.4i r1 works great for me, unfortunately 1.4i r2 kernel panics when the DVD is booting. I've tried multiple burns with the same result. Patiently awaiting r3 release.... Link to comment Share on other sites More sharing options...
bauzer71487 Posted July 30, 2007 Share Posted July 30, 2007 Excuse the noob question, but I keep hearing about getting this cool software from "... the usual places". But just where are the usual places? Are people talking about torrents? Thanks BR www.Demonoid.com I also mirror them to www.batechcentral.com/bauz/mac/ It's a {censored} mirror, but it gets you the torrent if you're desperate. . . .and it's only uphuck's uploads. --------------------------------------------------------- That aside, @uphuck. I did some more stuff w/ my pc and I ended up just reinstalling. . I did notice that the ICH8 patch isn't on R2. . no big deal though - just popped in the old one - patched - and she booted just fine. The Sata card is good so far. . only slots 0 and 1 are working. . 2 and 3 do not. I haven't gotten the fricken NTFS driver to work yet. . so I can write - but I'm still trying with that. Thanks again. Link to comment Share on other sites More sharing options...
freekz Posted July 30, 2007 Share Posted July 30, 2007 Alright, I've checked my MD5, tried a bunch of different media and I'm burning at the slowest speed, but I'm still getting an error opening the install plan when I attemp to install from the DVD, could it be a problem with the x200 chipset? I'm using a D101GGC motherboard. Is there anyway this problem could be fixed in the third revision of the 1.4i DVD? Thanks Link to comment Share on other sites More sharing options...
basjes Posted July 30, 2007 Share Posted July 30, 2007 first of all great work. some how i can't get it to play nice. install went fine, but when i boot OSX it presents me wit a login window. I have tried severall times but this anoying login window keeps popping up Anyone got a clue how to log in? I haven't made a user ye so i don't know username or password Thanks a lot. Link to comment Share on other sites More sharing options...
L EphIno Posted July 30, 2007 Share Posted July 30, 2007 Hey , I have tried to boot into the OSX installation but I cannot even get to that point. I get stuck with the "still waiting for root device error"I tried using SATA , i dont have IDE HD Whats wrong, whats i'm missing ????? Tried 10.4.6 Jas (all)P5VD1-X 3.0 dual core2gb ram2 HD SATA 80gb ATI 9600PROPLEASE HELP ME !!!!!!!!Also Tried 10.4.9 uphuck !! Getting "still waiting for root device error" I just ran into this problem, just needed to change the sata operation to legacy in the bios instead of using normal. Hope that helps. Link to comment Share on other sites More sharing options...
iugo Posted July 30, 2007 Share Posted July 30, 2007 Thanks Uphuck! I appreciate your work! I have successfully loaded the 1.4i r2 on my Dell Inspiron 640m/1405 Intel Core 2 Duo T5200. Tried running both cores, but as per Dell's, ended up turning off one core in the bios. It has the 945GM chipset and Sigmatel 9200. Sound didn't work out of the box even though I chose the Sound Patch, but works fine now with the AppleHDApatcher v1.16. Blue fade to Black after install reboot--- The Install goes normally, then reboots then after the gray apple screen it would display blue screen for a few seconds then fade to black. I would do this a few more times about every minute or so. It would never launch into the registration/setup wizard. Found out I was choosing the wrong chipset patch (ICH7R, ICH6 etc) Due to my ignorance, I had to reinstall several time due to my not knowing that ICH7 meant chipset. So once I figured that out I used your included ICH6, iCH8 patch and it works. I would like to bring to your attention an issue I have not seen discussed yet. Once the system is up and working, it doesn't seem that the Disk Utility is able to create a New Image from the OSX partition to anothor mounted partition or external usb. The error message is Disk Utility Progress dialog box and the error message is "Unable to create "samplefilename.dmg". Resource busy." Has anyone been able to duplicate this error? Uphuck, thanks again for all your work. You rock! Iugo Link to comment Share on other sites More sharing options...
lennyb Posted July 31, 2007 Share Posted July 31, 2007 @lennyb AppleMPIC.kext is a powerpc binary that you can not load it on any intel, so it has nothing to do on our pc's.. thank you for informations, i put 10.4.8 apic + acpiplatform as a package to choose and tested on my systems, it would be good if you test and make it clear that any other thing is needed or not.. OK. I confirmed that an install from the 1.3 DVD will boot successfully on the Inspiron 8600 (Intel 855PM) when there is no AppleMPIC.kext present in the Extensions folder. You are right that all it needs is the 10.4.8 version of AppleAPIC.kext and the 10.4.8 ACPIPlatform kext. I still need to check what happens, though, when there's a 10.4.8 version of AppleAPIC and also an active 10.4.9 version of AppleMPIC in the extensions folder. I think that combination caused a kernel panic the last time I tried it, but I don't remember for sure. If you're going to continue to do Intel-only DVDs, I guess you should just omit the AppleMPIC.kext, entirely, from the Intel DVDs. The T-I PC Card controller I was referring to in my last message is the 4510/7510. The driver thread on it is at http://forum.insanelymac.com/index.php?sho...l=iopccard.kext After modifying the I/O addresses in the Info.plist for IOPCCard.kext, I'm able to use a Netgear GA511 Gigabit PCMCIA Ethernet card with the Dell Inspiron 8600. Someone in the that thread reports getting one of the test versions of IOPCCard.kext to work successfully with a Latitude D610. I haven't tried that yet, but it would be fairly useful, since the fix for the built-in Broadcom Extreme 57xx Gigabit Ethernet (commonly present in newer Dell laptops) is erratic. You might want to think about including the IOPCCard driver on your DVD. Or maybe do an all-laptop DVD that would also include touchpad drivers, Tulip (for other PC Card ethernet adapters), etc. I'd still like to find a working fix for the sleep feature on the Latitude D620, since putting it to sleep and waking it up might allow it to run both cores of the CPU without stuttering. Link to comment Share on other sites More sharing options...
legolas96 Posted July 31, 2007 Share Posted July 31, 2007 hi, my instalation of uphuck v1.4i just went fine but when i copy a 3 GB file to my disk it takes about 30 minutes and the cpu usage is 99% there is one process called kernel_task it takes 97% of cpu is there any fix for this? thx, legolas my system: chipset: Intel P965 Controller: ICH 8 intel core duo 2 1800 mhz 1024 gb ddr 533 250 GB samsung hdd sata Asus DVD-rw sata motherboard: asus p5b-vm se uphuck thanks for hard work Link to comment Share on other sites More sharing options...
dc297spec Posted August 1, 2007 Share Posted August 1, 2007 uphuck this is an awesome release everything worked right from the start. This release run's much faster than my previous 10.4.8 setup. I am having a problem with the "you control tunes" software it loads up and asks to input my serial and then the app crrashes. I was using this same software on 10.4.8 with no problems any help would be much appreciated. System Specs Intel e-6300 Oc to 3.18Ghz 2Gb pc2 6400 Gigabyte p965-DS3 rev 1.0 2 X 250 WD CAVIER HD's Plextor Dvd burner Pata Thanks Link to comment Share on other sites More sharing options...
sososo Posted August 1, 2007 Share Posted August 1, 2007 Will it work on Asus a8n-vm mobo? latest beta bios installed. Link to comment Share on other sites More sharing options...
uphuck Posted August 1, 2007 Share Posted August 1, 2007 v1.4i revision 3 is out, you can find it on its usual place.. Link to comment Share on other sites More sharing options...
Erhnam Posted August 1, 2007 Author Share Posted August 1, 2007 v1.4i revision 3 is out, you can find it on its usual place.. Could you tell us what's new? Link to comment Share on other sites More sharing options...
uphuck Posted August 1, 2007 Share Posted August 1, 2007 fixed the ppc problem, and ich8 and via problems. Link to comment Share on other sites More sharing options...
damesj Posted August 1, 2007 Share Posted August 1, 2007 Im downloading it now.. I'll see if I can get it working tonight and let you know how everything is. Last version worked perfect for me except for the quicktime conflict so I dont expect any problems with this one. Link to comment Share on other sites More sharing options...
impreza Posted August 1, 2007 Share Posted August 1, 2007 any support for VIA VT6421 sata controller Link to comment Share on other sites More sharing options...
msll Posted August 2, 2007 Share Posted August 2, 2007 uphuck, is there any specific reason you remove mail in 1.4i r3? I use mac os x mail as my major mailbox. Is it ok if I install the mail package after installation? Thanks. fixed the ppc problem, and ich8 and via problems. Link to comment Share on other sites More sharing options...
uphuck Posted August 2, 2007 Share Posted August 2, 2007 By the modifications I made, I had no space for it. Link to comment Share on other sites More sharing options...
SystemiC_Music Posted August 2, 2007 Share Posted August 2, 2007 Hi downloaded that dvd and run the installation... But the install stop and write as happen sone error and i need to reinstall this again... I have MSI VR600: Processor: Intel core2 duo T5500 Chipsets: Intel® 943GML+ICH7-M System Memory 1GB DDR2 667 LCD Display 15.4" TFT AVC WXGA display Audio HD Audio, 2 speakers (1.5W) HDD 120GB (5400RPM), SATA interface Optical Drive COMBO/DVD Super Multi Communication Port Built-in Gigabit Ethernet LAN and Modem Module Built-in 802.11b / g WLAN Card PC Card Slots PCMCIA 2.1, Type II x 1 Card Reader 4-in-1 Card Reader, MMC/SD/MS/MS Pro Webcam Built-in 1.3M pixel webcam I/O Port VGA out (15-pin, D-Sub) X 1 USB2.0 Port X 4 Mic-in Port X 1 Headphone/SPDIF out X 1 Modem Port X 1 LAN Port X 1 S-Video Port X 1 Line-in port X 1 IEEE 1394 Port X 1 Please if someone know something about that HELP me PLEASE I got that error when i trying install Tiger 10.4.6 (original disk). TNX Dekel. Link to comment Share on other sites More sharing options...
richtig Posted August 2, 2007 Share Posted August 2, 2007 By the modifications I made, I had no space for it. I would recommend dropping the idea of confining the disc size to a "mini DVD". Very few users bother with these. Most use the normal sized 4.7 Gb discs anyway. Link to comment Share on other sites More sharing options...
richtig Posted August 2, 2007 Share Posted August 2, 2007 Installed 10.4.9 V. 1.4_R3. Thanks for fixing the VIA chipset and Rhine Lan support. Installed with ATI AGP Support and Callisto 008, however: "About this Mac" shows: still no Core Image/Quartz Extreme support for my Radeon X1600 AGP card. My IDE DVD-RW shows: "Burn Support: Yes(Unsupported)" ??; haven't tried burning a disc yet. Software Update shows 3 updates available: Itunes, QuickTime, and the 10.4.10 system update. System goes into sleep mode after 10 minutes of inactivity and will not resume; probably due to having selected the "remove CPU power option" Link to comment Share on other sites More sharing options...
Recommended Posts