newelement Posted May 27, 2007 Share Posted May 27, 2007 I upgraded from a Pentium D 820 to the Intel E6600 and it shows up 1.8ghz. I set the FSB in the com.apple.boot.plist to 266. What else can I do? Link to comment https://www.insanelymac.com/forum/topic/52250-solved-intel-e6600-shows-up-as-18ghz/ Share on other sites More sharing options...
rogerk Posted May 27, 2007 Share Posted May 27, 2007 Hi Im no expert in the new mac (work in pc market) but shurly the motherboard sets the clock speed, and i doubt the mac will change it, the fsb on board is 1066MHz FSB I know i run a 6600, the mac might just falsly report the speed Try xbench (performance test) should tell you if its running at correct speed This is my cpu result core 2 duo 6600, mine may not be set up perfectly but should be about right CPU Test 124.69 GCD Loop 281.60 14.84 Mops/sec Floating Point Basic 136.27 3.24 Gflop/sec vecLib FFT 100.83 3.33 Gflop/sec Floating Point Library 88.72 15.45 Mops/sec Link to comment https://www.insanelymac.com/forum/topic/52250-solved-intel-e6600-shows-up-as-18ghz/#findComment-373089 Share on other sites More sharing options...
newelement Posted May 27, 2007 Author Share Posted May 27, 2007 Ok. My CPU score is 92.43. Seems too low to me. Link to comment https://www.insanelymac.com/forum/topic/52250-solved-intel-e6600-shows-up-as-18ghz/#findComment-373243 Share on other sites More sharing options...
rogerk Posted May 27, 2007 Share Posted May 27, 2007 Does sound like you are running at 1.8 gig htz 124 / 2.4 * 1.8 = 93 so maths add up you are running at 1.8 gig htz problem is why? have you gone into M/B bios and checked settings for Processor? Link to comment https://www.insanelymac.com/forum/topic/52250-solved-intel-e6600-shows-up-as-18ghz/#findComment-373270 Share on other sites More sharing options...
newelement Posted May 27, 2007 Author Share Posted May 27, 2007 The BIOS says 2.4ghz @ 1066 FSB. Maybe I need to flash the bios. It is a little old. The version is right at the time the E6600s hit newegg.com Link to comment https://www.insanelymac.com/forum/topic/52250-solved-intel-e6600-shows-up-as-18ghz/#findComment-373525 Share on other sites More sharing options...
newelement Posted May 28, 2007 Author Share Posted May 28, 2007 That did not work. Any other suggestions? Link to comment https://www.insanelymac.com/forum/topic/52250-solved-intel-e6600-shows-up-as-18ghz/#findComment-373708 Share on other sites More sharing options...
sarahbau Posted May 28, 2007 Share Posted May 28, 2007 Does the BIOS let you set the bus speed manually? On my boyfriend's new board and E6320, it originally booted at 1.4GHz until we changed the bus speed (it was at 200MHz initially for some reason). Link to comment https://www.insanelymac.com/forum/topic/52250-solved-intel-e6600-shows-up-as-18ghz/#findComment-373719 Share on other sites More sharing options...
newelement Posted May 28, 2007 Author Share Posted May 28, 2007 The BIOS is reporting the FSB at 1066 which is correct. It seems other people have had this problem but I cannot find the right thread. I've also tried re-installing JAS's loginwindow package. Link to comment https://www.insanelymac.com/forum/topic/52250-solved-intel-e6600-shows-up-as-18ghz/#findComment-373723 Share on other sites More sharing options...
rogerk Posted May 28, 2007 Share Posted May 28, 2007 As Sarahbau said (Does the BIOS let you set the bus speed manually? On my boyfriend's new board and E6320, it originally booted at 1.4GHz until we changed the bus speed (it was at 200MHz initially for some reason).) Bus speed needs to be set to 266 on motherboard Can you see the processor speed displayed by the bios as the computer starts, its quite quick on these fast machines mine shows 2.4 GHz! most pc's display a page or two after the startup beep! cant help but feel that the motherboard/ M/B settings are at fault bios upgrade is not a bad idea! can often allow for newer processors/ os features etc Link to comment https://www.insanelymac.com/forum/topic/52250-solved-intel-e6600-shows-up-as-18ghz/#findComment-373749 Share on other sites More sharing options...
newelement Posted May 28, 2007 Author Share Posted May 28, 2007 Yes I manually set the FSB to 266 in the BIOS. Both on POST and in BIOS the speed is 2.4ghz and 1066 FSB (266x4). I have another hard rive I'm going to install OSX86 on to see what happens. Be back in an hour ;-) Link to comment https://www.insanelymac.com/forum/topic/52250-solved-intel-e6600-shows-up-as-18ghz/#findComment-373937 Share on other sites More sharing options...
newelement Posted May 28, 2007 Author Share Posted May 28, 2007 Ok here is what happened: I installed JaS 10.4.8 and it sees the CPU as 2.4ghz. When I run the JaS 10.4.9 Combo update with loginwindow patch and reboot, it sees it as 1.8ghz again. So Can someone help me fix this? Now I know it is the OS. Link to comment https://www.insanelymac.com/forum/topic/52250-solved-intel-e6600-shows-up-as-18ghz/#findComment-373961 Share on other sites More sharing options...
newelement Posted May 28, 2007 Author Share Posted May 28, 2007 Its fixed. I was working on other things and had to repair disk permissions at one time. Once I rebooted I notice the time was running fast, so I knew that was the fsb issue in the com.apple.boot.plist file. I opened it up in terminal this time and not text editor and noticed that my setting was now missing. I keyed fsb=266 back into the file and saved and rebooted. Now it sees the CPU as 2.4!!!!! Thanks for your help guys this was fixed by accident. BTW my Xbench score went from 110 to 195!!! Link to comment https://www.insanelymac.com/forum/topic/52250-solved-intel-e6600-shows-up-as-18ghz/#findComment-374245 Share on other sites More sharing options...
rogerk Posted May 31, 2007 Share Posted May 31, 2007 Oh well its working Clocked mine to 3GHz Bus at 333 displayed speed in OSX changed without any editing of OS all i have to do now is get a faster HDD Link to comment https://www.insanelymac.com/forum/topic/52250-solved-intel-e6600-shows-up-as-18ghz/#findComment-376159 Share on other sites More sharing options...
nervouschimp Posted June 9, 2007 Share Posted June 9, 2007 i now have this exact same problem with my E600 now that i have updated with the jas 10.4.9combo update. can someone please provide me detailed instructions on how to key in the proper fsb so i can run at full speed again? i am now running at only 1.8ghz. thanks. Link to comment https://www.insanelymac.com/forum/topic/52250-solved-intel-e6600-shows-up-as-18ghz/#findComment-380992 Share on other sites More sharing options...
Zeromaru Posted June 13, 2007 Share Posted June 13, 2007 Yes, a detailed guide would be helpful. And unfortunate side effect of the system thinking I have a 1.8 GHz CPU when I really have 2.4 GHz is that every timed event runs 33% too fast - most notably the clock and watching videos. Thanks in advance! Link to comment https://www.insanelymac.com/forum/topic/52250-solved-intel-e6600-shows-up-as-18ghz/#findComment-383180 Share on other sites More sharing options...
Recommended Posts