fwood Posted August 27, 2011 Share Posted August 27, 2011 Thanks again! Unfotunately i have NO dsdt and NO smbios! I use a mythical bios modded by Cartri! But however in system profiler i can see "mac pro 3.1" and...cpu and other components are perfectly recognized . As i told...until 10.6.7 pci card worked perfectly ! I think it's a problem regarding network or wireless or pcicard kexts...but i already try everything with no success ! I use snow server 10.6.8 with kernel and extensions @ 64bit! Link to comment Share on other sites More sharing options...
LatinMcG Posted August 29, 2011 Share Posted August 29, 2011 Thanks again! Unfotunately i have NO dsdt and NO smbios! I use a mythical bios modded by Cartri! But however in system profiler i can see "mac pro 3.1" and...cpu and other components are perfectly recognized . As i told...until 10.6.7 pci card worked perfectly ! I think it's a problem regarding network or wireless or pcicard kexts...but i already try everything with no success ! I use snow server 10.6.8 with kernel and extensions @ 64bit! dump dsdt from custom cartri bios then change Device (PCI) _ADR 0x01 to 0x00 (One to Zero) time to flash latest bios and custom that dsdt properly. i had issues with 10.6.8 try using imac10,1 or 11,1 smbios and chameleon2 rc5. i tried a custom bios once and i went back to standard. ahh server.. not my boat. Link to comment Share on other sites More sharing options...
Hugo_bee Posted September 11, 2011 Share Posted September 11, 2011 please don't write to search in google for the kext 4311.. it never exist for lion nor lion original dvd is including it! so.. if you are gentle to post.. good. or correct the 1st post.. because there's a lot of Hp pavillion sold since 2 weeks.. which includes that kind of wifi! and the 99% of threads are poiting into your! thanks Link to comment Share on other sites More sharing options...
palia95 Posted September 14, 2011 Share Posted September 14, 2011 Hi my friends Usb device web site: http://www.airties.com/product-details.asp...ers&dil=eng USB\VID_0A5C&PID_BD13&REV_0001 USB\VID_0A5C&PID_BD13 http://www.pcidatabase.com/search.php?vend...r_search=Search BCM4323 Intensi-fi® XLR Single-Chip 802.11n USB Solution I installed the iAtkos S3 v2 on my computer. I have not changed a setting in any phase of installation. So I did the installation with the current settings. But usb wireless device does not work. Thank you in advance for your help. Best regards. I have yours same adapters and problems!! can anyone help us?? Link to comment Share on other sites More sharing options...
Harmandeep Singh Posted September 23, 2011 Share Posted September 23, 2011 problem solved for detailed instructions visit http://www.tech-vogue.com/Pandora%27s%20Bo...%20Drivers.html Link to comment Share on other sites More sharing options...
pinzel76 Posted September 27, 2011 Share Posted September 27, 2011 Hi guys... I had a look at the pages of this thread to get some hints on the installation of the Broadcom 4113 (I own an HP Pavilion dv6 (6170)) I tried to use the script bcm43xx_enabler but it doesn't work. I mean: the script wants me to specify where "AppleAirPortBrcm4311.kext" is located but I don't know! In fact the directory /System/Library/Extensions/IO80211Family.kext/Contents/PlugIns contains only: AirPortArtheros21.kext AirPortArtheros40.kext AirPortBrcm4331.kext AppleAirPortBrcm43224.kext IO80221NetBooter.kext Is there someone who can help me? Thank you very much! Link to comment Share on other sites More sharing options...
Hugo_bee Posted September 30, 2011 Share Posted September 30, 2011 me too.. please attach a proper valid lion kext because lion doesn't heve 4311 kext into the 80211!!! Link to comment Share on other sites More sharing options...
Harshboy Posted October 1, 2011 Share Posted October 1, 2011 Ran the script on Lion, patched successfully, restarted and still no wireless. I have a 43225 Wireless Card which I believe is compatible or at least was in Snow Leopard to my understanding. Any help for Lion and the BCM43225 If no help with this card, whats the cheapest half height mini wireless n card compatible with lion? Link to comment Share on other sites More sharing options...
Hugo_bee Posted October 1, 2011 Share Posted October 1, 2011 Ran the script on Lion, patched successfully, restarted and still no wireless. I have a 43225 Wireless Card which I believe is compatible or at least was in Snow Leopard to my understanding. Any help for Lion and the BCM43225 If no help with this card, whats the cheapest half height mini wireless n card compatible with lion? excuse me.. how could you run the script if it searchs for the 4311kext under io80211.. and in lion it never exist? Link to comment Share on other sites More sharing options...
Harshboy Posted October 1, 2011 Share Posted October 1, 2011 excuse me.. how could you run the script if it searchs for the 4311kext under io80211.. and in lion it never exist? Don't ask me how I did it but it did "work". At first it failed and told me to locate it manually and I did and it didn't complain or anything, I have read about how that file is missing however, so I guess the script ran but did nothing, which would explain why nothing has changed. Link to comment Share on other sites More sharing options...
FWP Posted October 15, 2011 Share Posted October 15, 2011 Dell 14z, broadcom 4315, 10.6.2, installed the broadcom package and ran the script, restarted a few times but it's not showing up at all. Any ideas? Link to comment Share on other sites More sharing options...
tdtran1025 Posted October 26, 2011 Share Posted October 26, 2011 I have an Broadcom brcm4321 that used to show up as airport once the activation script was run. After updating to 10.7.2, it can no longer be activated no matter what I tried. System info still shows that it is there but I can't get to it. Any idea why? Something has changed in 10.7.2 IO80211Family next that creates this odd behavior. The bcm43xx_enabler script used to work on this card in 10.7.1, just to clarify. Untitled.tiff Link to comment Share on other sites More sharing options...
YouDoMeIDoYou Posted November 1, 2011 Share Posted November 1, 2011 I have an Broadcom brcm4321 that used to show up as airport once the activation script was run. After updating to 10.7.2, it can no longer be activated no matter what I tried. System info still shows that it is there but I can't get to it.Any idea why? Something has changed in 10.7.2 IO80211Family next that creates this odd behavior. The bcm43xx_enabler script used to work on this card in 10.7.1, just to clarify. Hi, try this IO80211Family.kext.zip Give it a try - maybe it helps Link to comment Share on other sites More sharing options...
LatinMcG Posted November 1, 2011 Share Posted November 1, 2011 Dell 14z, broadcom 4315, 10.6.2, installed the broadcom package and ran the script, restarted a few times but it's not showing up at all. Any ideas? smbios.plist and dsdt.aml . dsdt needs Device (PCI0) _UID ... replace _ADR with _UID. also the location of where wireless is in ioreg.. can be changed in dsdt to say 4312 smbios should not use MacBookPro4,1 try Macbook5,1 or MacBookPro6,1 i had this problem with 10.6.8 update. so it might not be the same issue.. 10.6.2 Link to comment Share on other sites More sharing options...
Black SER Posted November 7, 2011 Share Posted November 7, 2011 Will this work because in the description you wrote " AirPort One Cards 4313",so will it rly work? Or is this not similiar with the BCM4313? TIA It's been 2 months anyone have any luck? Link to comment Share on other sites More sharing options...
slserg Posted November 7, 2011 Share Posted November 7, 2011 Hi, try this IO80211Family.kext.zip Give it a try - maybe it helps Where you get kext with included driver? Anybody try this? Link to comment Share on other sites More sharing options...
LatinMcG Posted November 7, 2011 Share Posted November 7, 2011 It's been 2 months anyone have any luck? 2 months ? try 2 yrs device id 4727 aka 4313 .. not older 4313 with different id. WONT WORK. Link to comment Share on other sites More sharing options...
Pd1 Posted November 8, 2011 Share Posted November 8, 2011 I apologize in advance for being a bit off-topic here, but I'm wondering if any of you guys know where I can find the latest BCM43xx driver for Win 7? I have a 2010 Mac Mini running v 5.100.198.22 (dated 4/6/11). Is there a newer driver to be had? I'm having a problem where it won't connect to a particular 5ghz network, but does connect to any 2.4ghz network. On OSX Lion it will connect to the 5ghz network, so I believe this is a driver issue. Link to comment Share on other sites More sharing options...
LatinMcG Posted November 8, 2011 Share Posted November 8, 2011 I apologize in advance for being a bit off-topic here, but I'm wondering if any of you guys know where I can find the latest BCM43xx driver for Win 7? I have a 2010 Mac Mini running v 5.100.198.22 (dated 4/6/11). Is there a newer driver to be had? I'm having a problem where it won't connect to a particular 5ghz network, but does connect to any 2.4ghz network. On OSX Lion it will connect to the 5ghz network, so I believe this is a driver issue. http://driverpacks.net/driverpacks/latest install www.7-zip.org to extract files. Link to comment Share on other sites More sharing options...
slserg Posted November 8, 2011 Share Posted November 8, 2011 Where you get kext with included driver? Anybody try this? WORK!!!! Link to comment Share on other sites More sharing options...
Pd1 Posted November 8, 2011 Share Posted November 8, 2011 http://driverpacks.net/driverpacks/latestinstall www.7-zip.org to extract files. Thanks, but I've actually got a newer driver version than the one in the latest "pack." I had already posted over there too. http://forum.driverpacks.net/viewtopic.php?id=5166 Link to comment Share on other sites More sharing options...
recifaliste Posted November 13, 2011 Share Posted November 13, 2011 i'dont understand... with finder I'm in the folder where i exctract the zip i open terminal and i write the command sudo ./bcm43xx_enabler.sh i try to exctract in different folder, all times "command not found" appear.... Please what's wrong? Thanks for all Link to comment Share on other sites More sharing options...
LatinMcG Posted November 13, 2011 Share Posted November 13, 2011 type sudo -s press enter.. type password.. now drag and drop the file to terminal.. press enter Link to comment Share on other sites More sharing options...
recifaliste Posted November 13, 2011 Share Posted November 13, 2011 You are great!!!! Thanks it work Link to comment Share on other sites More sharing options...
Oxtie Posted November 17, 2011 Share Posted November 17, 2011 Can anyone tell me if this model is ever going to work? I've finished installing Lion on someone else's computer... Name: Broadcom 802.11n Network Adapter Device ID: PCI\VEN_14E4&DEV_4357&SUBSYS_E021105B&REV_01\4&E764662&0&00E1 Link to comment Share on other sites More sharing options...
Recommended Posts