Dragon Master Posted July 20, 2011 Share Posted July 20, 2011 Has anyone tried using the AftertheMac n300? http://afterthemac.com/ Does this work with a Hack'a'Mac? Either Snow Leopard or Lion? Link to comment Share on other sites More sharing options...
zchef2k Posted July 23, 2011 Share Posted July 23, 2011 GREAT STUFF! Got this working for a Dell Precision M90 running 10.6.7 retail with a BCM5752 (Vid 0x14e4 Pid 0x1600).Based on Sunki's kext file, I replaced the "pci14e4,167b" string in the plist with "pci14e4,1600" and replaced all instances in his kext file with a hex editor from 7b 16 --> 00 16 Works perfectly both in 32 bit and 64 bit! Enjoy. I tried this on the vanilla 5701 kext for Lion and it didn't take. Can someone crack that nut? PmgR, I have the exact same card as you, although lspci appends it with '(Rev 02)', if that matters. Thanks guys. Dragon Master, this thread has nothing to do with WiFi adapters. Head elsewhere. Z Link to comment Share on other sites More sharing options...
BloodyVlad Posted September 26, 2011 Share Posted September 26, 2011 What about Lion? Tried modofied plugin and it's recognized in Network Panel, but does not work. Link to comment Share on other sites More sharing options...
Trututu Posted January 4, 2012 Share Posted January 4, 2012 Anyone here with kext for Broadcom NetXtreme BCM5752 Gigabit Ethernet PCI Express (14e4 1600) for SnowLeopard 10.6.8 or Lion 10.7.2 ?? Link to comment Share on other sites More sharing options...
Cerastez Posted January 29, 2012 Share Posted January 29, 2012 This is a fix for the all zeros MAC Address http://www.insanelymac.com/forum/index.php?showtopic=275174 Link to comment Share on other sites More sharing options...
the.delro Posted April 25, 2012 Share Posted April 25, 2012 GREAT STUFF! Got this working for a Dell Precision M90 running 10.6.7 retail with a BCM5752 (Vid 0x14e4 Pid 0x1600). Based on Sunki's kext file, I replaced the "pci14e4,167b" string in the plist with "pci14e4,1600" and replaced all instances in his kext file with a hex editor from 7b 16 --> 00 16 Works perfectly both in 32 bit and 64 bit! Enjoy. Doesn't work for my 5752 on 10.6.8. Have you upgraded to 10.6.8 or 10.7 and got this to work? Thanks. Link to comment Share on other sites More sharing options...
hle500 Posted May 8, 2012 Share Posted May 8, 2012 after several requests for my modded kext for propper working bcm57760, here we go: AppleBCM5701Ethernet.kext.zip put it into the plugin folder of ionetworking and checky for working :-) would love to see if it will work on your rigs ,-) cheers, knobsi Thank you It works on my gateway ns30 (acer travel mate mb) with broad com 57760 :-) Link to comment Share on other sites More sharing options...
NSquirrel Posted January 27, 2013 Share Posted January 27, 2013 I have used 10.5.1 on my IBM T43 (2668 F5G) off and on but had never got around to enabling the net access. My thanks to posts here, specifically #187 Nisa-it Posted 14 June 2006 04:46 PM, in this tread and http://www.insanelymac.com/forum/topic/275174-applescript-to-set-your-mac-address-on-startup/ (Now to update 10.5.1...) Link to comment Share on other sites More sharing options...
Pave99 Posted April 9, 2014 Share Posted April 9, 2014 Sorry for replying in the old post, but i have Broadcom 57xx and Niresh's Maverics. Is there any drivers anymore?? Link to comment Share on other sites More sharing options...
Tmarkr Posted August 10, 2014 Share Posted August 10, 2014 trying to get the ethernet on a Optiplex 740 Enhanced with a Broadcom NetXtreme 57xx gigabit controller to work, I have tried AppleBCM5751Ethernet, but still nothing . ven_14E4 dev_167A Link to comment Share on other sites More sharing options...
bhobot Posted April 9, 2015 Share Posted April 9, 2015 I can:t download the attachment for bcm5752 kext. When I click the link it says that attachment cannot be viewed. Please I need help. Link to comment Share on other sites More sharing options...
Recommended Posts