gn!uz Posted March 31, 2007 Share Posted March 31, 2007 Hey, I tried to install it using the 10.4.8. JaS SSE3 Intel only. I deselected all options except: 10.4.8. Combo, SSE3 hack Semtex. After a succesfull installation it reboots and hangs with this message: panic(cpu1 caller....unresolved kernel trap cpu 1, type 14=page fault).. some lines below Backtrace terminated-invalid frame pointer 0x0 Anyone got an idea? Its an Intel Centrino Duo T2600 I'm wondering which steps I have to take to get this thing booting.. And are people here having success with an ATI FireGL? Many thanks.. Link to comment Share on other sites More sharing options...
braynshock Posted April 4, 2007 Share Posted April 4, 2007 Hey, I tried to install it using the 10.4.8. JaS SSE3 Intel only. I deselected all options except: 10.4.8. Combo, SSE3 hack Semtex. After a succesfull installation it reboots and hangs with this message: panic(cpu1 caller....unresolved kernel trap cpu 1, type 14=page fault).. some lines below Backtrace terminated-invalid frame pointer 0x0 Anyone got an idea? Its an Intel Centrino Duo T2600 I'm wondering which steps I have to take to get this thing booting.. And are people here having success with an ATI FireGL? Many thanks.. You need to tell OSX to disable one of the CPUs. During bootup, press F8. Then type in: cpus=1 That will get the system to boot. I've been able to get the Video graphics working just fine, using no additional packages. I set the graphics mode in the boot parameters. I have not been able to get the network card functioning, which is driving me to distraction. --Shawn Link to comment Share on other sites More sharing options...
gn!uz Posted April 4, 2007 Author Share Posted April 4, 2007 Thanks for your reply.. At least someone with an nw8440.. Can you describe which components (hacks) you installed to get it running..? Also, you are saying I need to disable one cpu. But which steps will make core duo work? And what about sata and the Ati FireGL? Aaahhh.. This seems like a very nice system to run osx on.. But sadly there's little info about this puppy.. Thanks again! Link to comment Share on other sites More sharing options...
braynshock Posted April 9, 2007 Share Posted April 9, 2007 Thanks for your reply.. At least someone with an nw8440.. Can you describe which components (hacks) you installed to get it running..?Also, you are saying I need to disable one cpu. But which steps will make core duo work? And what about sata and the Ati FireGL? Aaahhh.. This seems like a very nice system to run osx on.. But sadly there's little info about this puppy.. Thanks again! Sadly, I'm forced to use this PC at work, the machine in my sig has been sold, I am working on a new AMDX2 machine for HTPC... I use a Mac Pro at home, wife has a Macbook. The 10.4.8 JaS Install works out of the gate on the video. I just had to make the resolution a boot parameter. Still trying to get the Ethernet to work. I've tried several BCM hacks. Sound is not working yet, but network was more important ;-) Link to comment Share on other sites More sharing options...
braynshock Posted April 13, 2007 Share Posted April 13, 2007 OK... Got the Onboard Nic working using several postings and created a working IONetworkingFamily.kext that works with my HP nw8440. The instructions for the most part are here: http://forum.insanelymac.com/index.php?showtopic=24479 I did have to set the mac address and run repair disk permissions before it worked, But works like champ now. I have attached the kext below. I'm going to start on tearing and sound now... --Shawn IONetworkingFamily.kext.zip Link to comment Share on other sites More sharing options...
gn!uz Posted April 25, 2007 Author Share Posted April 25, 2007 Hey, Well finally some luck to get the system to boot.. I *fixed* my issue: panic(cpu1 caller....unresolved kernel trap cpu 1, type 14=page fault) by setting the -z option (Semthex parameter for setting FSB=166MHz) and all went well. It seems my NIC is recognized by default, no sound, and video with QE/CI out of the box indeed but I get some artifacts and cannot set the resolution by default. I only tried to set the parameter "Graphics Mode"="1680x1050x32" and that did not work.. In your sig I read you are using 1400x1050x32? Is this correct? I tried borisbadenov to fix the 5200 but that results in a black screen... Link to comment Share on other sites More sharing options...
braynshock Posted April 26, 2007 Share Posted April 26, 2007 Hey, Well finally some luck to get the system to boot.. I *fixed* my issue: panic(cpu1 caller....unresolved kernel trap cpu 1, type 14=page fault) by setting the -z option (Semthex parameter for setting FSB=166MHz) and all went well. It seems my NIC is recognized by default, no sound, and video with QE/CI out of the box indeed but I get some artifacts and cannot set the resolution by default. I only tried to set the parameter "Graphics Mode"="1680x1050x32" and that did not work.. In your sig I read you are using 1400x1050x32? Is this correct? I tried borisbadenov to fix the 5200 but that results in a black screen... I tried using 1600x1200x32 and it automatically set the screen to 1400x1050x32. Have you figured out what the sound card is? or what drivers we might need? --Shawn Link to comment Share on other sites More sharing options...
gn!uz Posted April 27, 2007 Author Share Posted April 27, 2007 The sound comes from a ADI Soundmax HD chip. Have you tried this: http://forum.insanelymac.com/index.php?sho...=ADI%20soundmax Link to comment Share on other sites More sharing options...
Jian Posted September 21, 2007 Share Posted September 21, 2007 Hi I was just trying all the combinations in the forum about mobility x1600 on the FireGL V5200 but none of them work. Somehow get the feeling the EDID I got from phoniex 1.3 is wrong... So I guess 1400x1050 is the max we can get? Link to comment Share on other sites More sharing options...
freakbsd Posted January 9, 2008 Share Posted January 9, 2008 Hey guys just for you information, the kext provided by braynshock is working also in Leopard (Kalyway 10.5.1). Link to comment Share on other sites More sharing options...
peregrine81 Posted May 18, 2008 Share Posted May 18, 2008 Has anyone been working on this for 10.5.2? The KTEXT doesnt seem to work for me in 10.5.2 and I don't know how to approach it for a new ktext.... Link to comment Share on other sites More sharing options...
Jian Posted May 31, 2008 Share Posted May 31, 2008 Yeah, search by nx9420, that one with ATIinject worked with nw8440. Chunnan's rev8 will make the PCMCIA working. For sound has to go found the universal HP laptop mute button fix. Link to comment Share on other sites More sharing options...
Bist Posted June 2, 2008 Share Posted June 2, 2008 hi guys, i'm new here so be nice. I'm also going to install this on a NW8440 I will be using Atkos 2.0 is that correct? Should I still disable the CPU? Is there a recommended guide I should follow? i'm a total noob with mac os. But I am familiar with all other IT related stuff. Just want to run macos on this laptop. Thanks for helping guys. Bist Link to comment Share on other sites More sharing options...
jftm Posted June 3, 2008 Share Posted June 3, 2008 Hi, Also got the nw8440. to Bist: - Installed today with iAtkos 2.0i. Had to disable 2nd Core, ATA Native and Virtualization (all of them in the BIOS) This is What I did: - Had Win XP installed (but wouldn't care I it get messed up, I planned on reinstalling if something went wrong). 1. Using Paragon Partition Manager I resized my Win XP Partition and made a new fat32. 2. Disabled setting in BIOS (see above) and booted Leopard DVD. used -v but works without it. 3. Opened Disk Utility, selected FAT32 part and select ERASE (Apple Journaled; first option) 4. Customized Install a) First attempt selected: - ATI 1600 - INTEL SATA - SPEED STEP RESULT: boots till the point it seems to enter OS X and suddenly... Black Screen (waited for 10 mins and nothing) I pressed the sensor that activates when you close the laptop and the result was a solid, light blue screen. nothing more. Second attempt: Clean Install not even pressed the customize button. RESULT: Boots to OS X, the welcome video played nicely. Graphics: only 1024x768 and lots of artifacts Sound: Seems Its detected even the buttons for volume and mute work (seems to turn up and down the volume in the graphic displayed by apple) but the orange led next to mute keps on and no sound. I think there is a fix for this somewhre. USB: Working, attached some external HD's. DVD: recognized and capable of burning (not tested). Maybe you can chose some options and customize your install someway to make it work (kernel's or something). The boot loader works great but now if I select windows I will crash at a Blue Screen. (I read somewhere that if you insert windows CD and chose repair It will work again, then you need to chose MAC partition as bootable. BTW I'm reinstalling windows instead of repairing, I'll post the result). HOPE THIS HELPS! Post your results please! Link to comment Share on other sites More sharing options...
Bist Posted August 13, 2008 Share Posted August 13, 2008 Ok I got it to work but can anyone please tell me step by step how to get the onboard nic to work. I don't understand a thing on what files I should edit. I tried a few thing but i'm lost here. What driver will work and wht should I do? All these bits and pieces are just not doing it for me. What I also would like to know is how I can permenanty can make sure that he boot with the optio "Graphics Mode"="1400x1050x32". What file should I edit to make it a permanent setting? Thanks mates Link to comment Share on other sites More sharing options...
robertoSTUDIOS Posted October 16, 2008 Share Posted October 16, 2008 Hi! Anyone install ideneb 10.5.5 in nw8440? If yes and Graphic working please share working kexts. My PM or my mail! roberto dot studios at gmail dot com Thank You! And happy hacking Link to comment Share on other sites More sharing options...
Recommended Posts