DivisionByZero Posted February 12, 2008 Share Posted February 12, 2008 this works with Leopard 10.5->10.5.1 am I correct? Link to comment Share on other sites More sharing options...
doobiebro Posted February 12, 2008 Share Posted February 12, 2008 can anyone confirm this method works with an Asus P5VD2-MX + Pentium D 805 + Asus Geforce 7300GTS? Link to comment Share on other sites More sharing options...
frak Posted February 12, 2008 Share Posted February 12, 2008 First couple of times I tried this is worked fine. Now all of a sudden, whenever I attempt this, I get kernel panics for the com.Apple...ACPI.kext (something along that order). Anybody have some advice on some common noob mistakes? Link to comment Share on other sites More sharing options...
Fastrac Posted February 12, 2008 Share Posted February 12, 2008 First couple of times I tried this is worked fine. Now all of a sudden, whenever I attempt this, I get kernel panics for the com.Apple...ACPI.kext (something along that order). Anybody have some advice on some common noob mistakes? I'm assuming you're going from 10.5.1 to 10.5.2. Things are different for 10.5.2. There are a couple of threads related to it. Do a search. Also, check out netkas.org He has a fix for the upgrade. Link to comment Share on other sites More sharing options...
DivisionByZero Posted February 13, 2008 Share Posted February 13, 2008 this works with Leopard 10.5->10.5.1 am I correct??????????????????????? Link to comment Share on other sites More sharing options...
darren4004 Posted February 13, 2008 Share Posted February 13, 2008 used it an i am now updated to 10.4.11 just trying to update the kernel now Link to comment Share on other sites More sharing options...
frak Posted February 14, 2008 Share Posted February 14, 2008 I'm assuming you're going from 10.5.1 to 10.5.2. Things are different for 10.5.2. There are a couple of threads related to it. Do a search. Also, check out netkas.org He has a fix for the upgrade. Nope. 10.4.9 -> 10.4.10 ->10.4.11 When I attempt to update to 10.4.10 I get a kernel panic traceback reading: com.apple.driver.AppleIntelCPUPowerManagement EDIT BTW, I run an SSE2 system. Link to comment Share on other sites More sharing options...
filmshoot Posted February 14, 2008 Share Posted February 14, 2008 THANKS THAT WAS PAINLESS! I just updated from jas 10.4.8 to 10.4.9 using this method everything works great! The only modification I did was instead of installing a gma900 driver, I just had to use kexthelper and reinstall radeon9700.kext so that I would have QE CI for my apg 9800 pro Here are my specs: P4 2.8 (soon to be oc'd) 1gb ocz platinum rev2 ddr lg ide dvd 160gb ide 7200 rpm wd hdd ps2 keyboard/mouse sound works great HOORAY- now I can install FCP 6 !!!!!! Link to comment Share on other sites More sharing options...
CptDodge Posted February 17, 2008 Share Posted February 17, 2008 Just followed the instructions and have successfully updated jaS 10.4.8 to 10.4.9..excellent. Top class to the orginal poster Link to comment Share on other sites More sharing options...
BlackFlux Posted February 18, 2008 Share Posted February 18, 2008 How do you know what kernel you are running? Never mind and just in case someone else needed to know. open the termianl to check the kernel version type uname -a Link to comment Share on other sites More sharing options...
Chaos Storm Posted February 20, 2008 Share Posted February 20, 2008 Apple 10.4.9 Defeated...Daleks Are Supreme! Link to comment Share on other sites More sharing options...
Rufus T. Firefly Posted February 22, 2008 Share Posted February 22, 2008 this method also worked for me when I changed kernels in Leopard How do you know what kernel you are running?Never mind and just in case someone else needed to know.open the termianl to check the kernel versiontype uname -aor open profiler and click on software Link to comment Share on other sites More sharing options...
Attrition Posted February 24, 2008 Share Posted February 24, 2008 Been skimming through this thread and haven't been able to find a strait answer so I was hoping someone could shed some light. I have already upgraded from 10.4.8 to 10.4.9 to 10.4.10 to 10.4.11 without updating the kernel. Is it possible to use this method with 10.4.11 to update the kernel, I don't want to proceed until I'm sure. Still have a couple small quirks that I'm hoping it will solve. Cheers Link to comment Share on other sites More sharing options...
teardroped Posted February 26, 2008 Share Posted February 26, 2008 hi i updatd froom 10.4.9 to 10.4.10 and evrything sems to work fine except for the system profile when i try About this mac it closes everything and restart the finder as if it log in all over again does anyone can help me pease!! Link to comment Share on other sites More sharing options...
jet73 Posted March 2, 2008 Share Posted March 2, 2008 Hi, I am a newbie at this and it is my 2nd day with OS X on my nc6000 laptop and about a week since I found out about Hackintoshes. I managed to install JAS 10.4.8 SSE2 OS X and did the fix to get the wireless to work. I then followed these instructions to upgrade to 10.4.9. It is totally my fault. I though I was following the instructions correctly. but after I ran the 10.4.9 delta package. I realised that I have actually typed in the last line to backup the system.kext. but I did not actually press the enter key on the keyboard to execute the backup command. needless to say, the update works. but I cannot open any dmg files. I went thru the JAS DVD that I installed 10.4.8 from and I found the Intel Pkg which I think is where the system.kext is but I have no way to extract it. I downloaded pacifist. but the program is in a dmg. so I can't even mount it. Can someone please tell me how I can get this kext file so I can fix up my blunder so I can open dmg again? Link to comment Share on other sites More sharing options...
jet73 Posted March 2, 2008 Share Posted March 2, 2008 Hi, Please ignore last post...I ended up installing Pacifist on a real mac at a friend's place and then extracting the system.kext. then I copied it back to my /System/Extensions directory using USB drive. I then used Disk Utility to repair the permissions and then rebooted. it is working with the dmg files now. Link to comment Share on other sites More sharing options...
Zhopa Posted March 21, 2008 Share Posted March 21, 2008 Joe Cargo thank you very much Link to comment Share on other sites More sharing options...
zenaustere Posted March 22, 2008 Share Posted March 22, 2008 when doing the 10.4.9 to 10.4.10 up date is this the correct delta updater Apple - Support - Downloads - Mac OS X 10.4.10 Update v1.1 (Intel) http://www.apple.com/support/downloads/mac...tev11intel.html Link to comment Share on other sites More sharing options...
connor.milligan Posted March 28, 2008 Share Posted March 28, 2008 when doing the 10.4.9 to 10.4.10 up date is this the correct delta updater Apple - Support - Downloads - Mac OS X 10.4.10 Update v1.1 (Intel) http://www.apple.com/support/downloads/mac...tev11intel.html Yes it is the right update i am having a problem fiding a download for DiaboliK.GMA900.Fixer.pkg.zip, i used to download it from filefront but that link no longer works, if anyone has a working like and could give me it I would be most greatfull, or if anyone has it on there mac and could email it to me i would take care of hosting it and provide ample bandwidth for everyone to download it. cheers Connor Link to comment Share on other sites More sharing options...
Tony Conte Posted April 6, 2008 Share Posted April 6, 2008 oh gosh i love kristen kreuk :S Greetings! Finally! It lives!!! hahaha Followed your instructions adding the system.kext back-up and apply JaS GMA900 (which needs tweaking to enable CI/QE) at the end of installation. The update resolved and issue with my wireless that was a pain for me. At my office, I have disabled SSID broadcast, so every time I booted Mac OS, I had to insert my network name and password, it did not save the config. Now after 10.4.9 it works beautifully! I took a print screen of it. Now I need to find out how to "delete" my second display, because when my mouse hits the right side of the screen, it "disappears" to the one faked by the one wire trick. I managed to plug in the monitor of our office server and clicked the mirror option and it works for a few times, but eventually it crashes and I'm stuck with a blue screen again... Does anybody know a fix for this? Thanks for your kind support! Edit: I'm having no problems with dmg files as mentioned before Link to comment Share on other sites More sharing options...
woodt3 Posted April 12, 2008 Share Posted April 12, 2008 10.4.10 on an SSE2 Lenovo X41! Link to comment Share on other sites More sharing options...
HyDrOgEn60 Posted April 16, 2008 Share Posted April 16, 2008 Hello, my problem is, that i've downloaded the SSE2 8.9.1 kernel from irc.. (1 jul 2007 ToH), but i get a kernel panic, it doesn't matter, if i delete, the AppleIntel...kext any ideas why is that? (same happens with 23 aug 2007 ToH kernel as well) thank you! btw, i'm running 10.4.9 on a hp nc8230, with a Dothan CPU. Hi, Could you please email me this famous "SSE2 8.9.1 kernel", i tried to find it everywhere but i didn't... It would be great ! Tank you ! A French Guy. Link to comment Share on other sites More sharing options...
wassupdoc Posted April 18, 2008 Share Posted April 18, 2008 can someone PM the link to 8.9.1 also. For a SSE2 processor. I connected to the irc channel, but didn't say any links. Want to make sure I get the right one before trying to update the kernel. Thanks ahead of time Link to comment Share on other sites More sharing options...
Seef Posted April 21, 2008 Share Posted April 21, 2008 Dear all, I'm also looking for the SSE2 8.9.1 kernel. Could anyone send it to me somehow or point to me where I can get it? Torrents etc. are nowhere to find anymore. Link to comment Share on other sites More sharing options...
connor.milligan Posted June 1, 2008 Share Posted June 1, 2008 Thanks mate, you are a life-saver Link to comment Share on other sites More sharing options...
Recommended Posts