wlf6423 Posted August 4, 2009 Share Posted August 4, 2009 Can anyone tell me what type of screws are used on the motherboard standoffs? I have removed the standoffs with pliers and plan to remount them with jb weld, but I need to find some replacement screws first. Thanks. Link to comment Share on other sites More sharing options...
nisto91 Posted August 12, 2009 Share Posted August 12, 2009 Am I better off with a mini atx or a regular atx mobo with this tray (which honestly I think is ugly, does anyone know of a nicer looking one?) Link to comment Share on other sites More sharing options...
Gunner_Sr Posted August 13, 2009 Share Posted August 13, 2009 Wow, I love what you guys are doing here. So I have ordered my G5 case. What is the cooling like with just having the two back fans (not sure on what size I would need though) and a stock Intel CPU fan? Next, I am looking at what to do with the back ports panel, that is, the right approach. I like the daughter-board approach using the connectors from a G5 board, but it looks way to hard and time consuming. I am not keen on using a whole motherboard tray with backplate. I have seen someone do a hybrid approach. Which is what mobo manufacturers do, that is supply a custom port plate to that mobo and you insert it into the backplate of the case or MB tray. My question is how would it look if I took that approach, I want to keep the two fan grills in place without cutting too much? BTW - (XS)s0lid - are you still making/selling the front panel PCBs, etc. If so, can you PM me I would like to get one? Thanks. Link to comment Share on other sites More sharing options...
ZFG Posted August 13, 2009 Share Posted August 13, 2009 Hi, I´m thinking of getting a G5 case, and I was wondering on where to get it in Norway or in Scandinavia. Link to comment Share on other sites More sharing options...
Gunner_Sr Posted August 13, 2009 Share Posted August 13, 2009 Hi, I´m thinking of getting a G5 case, and I was wondering on where to get it in Norway or in Scandinavia. Your best bet is a reseller of apple parts in your country, or you could try ebay and see if they ship to your location. The cases are a little heavy, especially if you want the power supply as well. Cheers. Link to comment Share on other sites More sharing options...
akira9000 Posted August 15, 2009 Share Posted August 15, 2009 Can anyone tell me what type of screws are used on the motherboard standoffs? I have removed the standoffs with pliers and plan to remount them with jb weld, but I need to find some replacement screws first. Thanks. they are m3.5 anodised and are a pain to get hold of. I found it easier getting some m3 stadoffs the height I needed and just getting some m3 screws to go with them Anybody here willing to make up a front panel to ATX converter lead for a few £$€? I don't think Ill have the time and its the last part I need. Link to comment Share on other sites More sharing options...
Thath0r Posted August 15, 2009 Share Posted August 15, 2009 Anybody here willing to make up a front panel to ATX converter lead for a few £$€? If there is somebody, I'd also be very interested! Link to comment Share on other sites More sharing options...
nerdalertdk Posted August 16, 2009 Share Posted August 16, 2009 If there is somebody, I'd also be very interested! what do you meen with atx to front ? Something like this ? Link to comment Share on other sites More sharing options...
Thath0r Posted August 17, 2009 Share Posted August 17, 2009 what do you meen with atx to front ? Something like this ? Yes, in a way. I think in this thread there was once a guy who made some of 'em. Let's just say it would reduce the work quite a bit. Link to comment Share on other sites More sharing options...
akira9000 Posted August 17, 2009 Share Posted August 17, 2009 Yes, in a way. I think in this thread there was once a guy who made some of 'em. Let's just say it would reduce the work quite a bit. yeah , like that but with the firewire and usb wired in too Link to comment Share on other sites More sharing options...
DiaboliK Posted August 17, 2009 Share Posted August 17, 2009 yeah , like that but with the firewire and usb wired in too last ive seen the xs(solid) pcb's were having problems and when i tried to get 3 of them i got scoffed off so i'd say make your own... Link to comment Share on other sites More sharing options...
Thath0r Posted August 18, 2009 Share Posted August 18, 2009 so i'd say make your own... Yeah, BUT HOW? Link to comment Share on other sites More sharing options...
nerdalertdk Posted August 18, 2009 Share Posted August 18, 2009 Yeah, BUT HOW? here all you need http://www.insanelymac.com/forum/index.php...t&p=1226642 Link to comment Share on other sites More sharing options...
akira9000 Posted August 19, 2009 Share Posted August 19, 2009 thanks for the link but its the time involved thats the issue, not the hardware/instructions thats the problem. If I have to I will indeed be knocking on of these up for myself. Guess I'll just have to be patient. Thath0r - whereabouts in the world are you.....UK, US, Euro? If I have to make 1, I guess I may as well do two at the same time. Could mail you one for a small donation to cover the postage. Always good to practice my soldering anyway, it may be 2 or 3 weeks before I get time though Link to comment Share on other sites More sharing options...
bjarnero Posted August 22, 2009 Share Posted August 22, 2009 thanks for the link but its the time involved thats the issue, not the hardware/instructions thats the problem. If I have to I will indeed be knocking on of these up for myself. Guess I'll just have to be patient. Thath0r - whereabouts in the world are you.....UK, US, Euro? If I have to make 1, I guess I may as well do two at the same time. Could mail you one for a small donation to cover the postage. Always good to practice my soldering anyway, it may be 2 or 3 weeks before I get time though Hi, I´d be interested, too... happy to donate, I need two, though, one for me, one for my brother, we're doing two G5's...:-) I live in Copenhagen, Denmark Link to comment Share on other sites More sharing options...
justaviet Posted August 30, 2009 Share Posted August 30, 2009 Does anyone have some of the internal stock apple parts they ripped out when modding?? I'm looking specifically for: G5 Heat Sink Cap PCI Divider Power Supply Cover and the plastic wire management thing under the stock logic board PM me Link to comment Share on other sites More sharing options...
olinboy1 Posted September 1, 2009 Share Posted September 1, 2009 Mac Pro Case for sale I found on eBay. I'm not in the market for another build, but I thought this would be a good place to bring it up. http://www.insanelymac.com/forum/index.php?showtopic=183449 Link to comment Share on other sites More sharing options...
ruslan120 Posted September 7, 2009 Share Posted September 7, 2009 Hey guys! I was having a couple of problems with dvi-hdmi scaling and the monitor's hdmi reading (it would show a big glaringly blue screen and flash until it found a signal) so I whipped up a dual socket DVI plate in one of the fan grills. I've updated my worklog and not double posting pics here because I'm being cheap and not re-paying for a photobucket pro account http://forums.bit-tech.net/showthread.php?...6579&page=4 Link to comment Share on other sites More sharing options...
ronsega Posted September 22, 2009 Share Posted September 22, 2009 Started on my G5 w/PC mod. Lots of information on this forum/thread. Just want to share my approach of wiring up the G5 front panel for ATX front panel. Here's my wiring harness with USB IDC connector. I re-used ribbon from an old IDE ribbon cable. Joined the wire harness using jumper wires and header pins and soldered them to the ribbon cable and attached to the IDC/jumper connectors Tested this on my current hackintosh setup. Powers up, LED lights up, USB (verified working) and Firewire (only verified to power device), sound (not verified yet) Link to comment Share on other sites More sharing options...
wlazara Posted September 22, 2009 Share Posted September 22, 2009 awesome! any chance I could talk you into wiring one of those up for me very willing to pay!!! Link to comment Share on other sites More sharing options...
AndrewH Posted September 23, 2009 Share Posted September 23, 2009 awesome! any chance I could talk you into wiring one of those up for me very willing to pay!!! Same here, I'll definitely cover your time + cost. Please let me know! Thanks, Andrew Link to comment Share on other sites More sharing options...
ronsega Posted September 27, 2009 Share Posted September 27, 2009 I can make extras probably 2 at a time on a weekend though. I was thinking what would be the easiest for somoene to hook up the end of these (blue wires) to the G5 front panel wire harness, I think I'll label them with the pinout number of the G5 pinout for direct plug in with the header pins. So if still interested PM me. -Ron awesome! any chance I could talk you into wiring one of those up for me very willing to pay!!! Same here, I'll definitely cover your time + cost. Please let me know!Thanks, Andrew Link to comment Share on other sites More sharing options...
Neonflux Posted September 30, 2009 Share Posted September 30, 2009 I can make extras probably 2 at a time on a weekend though. I was thinking what would be the easiest for somoene to hook up the end of these (blue wires) to the G5 front panel wire harness, I think I'll label them with the pinout number of the G5 pinout for direct plug in with the header pins. So if still interested PM me. -Ron Can you also make one for me please? I created something similar, but it seems that wires are touching at the other end to each other , as mine is not as neatly done as yours. Link to comment Share on other sites More sharing options...
gitano Posted November 18, 2009 Share Posted November 18, 2009 Heyho, So after reading in these excellent forums for quite a long while i decided to start this mod as well. Hackintosh in a standard pc case is fine...but dunno, somehow something was still missing. Yes, a shiny enclosure. All the available lian-li etc cases didnt satisfy me, so after i finally stumbled over this excellent thread i decided: hell yeah, lets do it . Here are a few first shots of my new (well, actually the hardware is quite old ) baby, which started modding last w/e (pardon the crappy mobile phone pics..still have no no decent camera, mmpf): A first shot of the tray fitted inside the cut out rear. I first have been planning to keep the original rear (as i suppose a lot of modders here did ) until i had some luck purchasing an old ripped off aluminium case from a local pc dealer for just 10 bucks, which tray was removable and had just the perfect size . Dunno, would have been cool to keep the original rear i/o together with the original pci slots... but that would've been a mayor pain in the ass also...soldering all the plugs, fitting it into a space as broad as 2cm, and re-doing all the work once u decide to buy a new mainboard... this way it is just usable and modular. And who looks at the rear all the day anyways . A first testing setup, i still have the PSU in front of the CPU cooler, which i had running without a fan in the beginnng. Which worked quite well on idle and normal use, never tested it on more power consuming tasks. Atm, i have a slim cooler with a small fan running at lower rpms between cpu and psu, this works quite well, but is a bit noisy. Am planning to go for a watercooling solution anyways, way to go with this case . The harddisks are still running in the original cage, which is not that best solution in terms of denoising and cooling the disks, imho. Still havent connected the 2 fans up there, will do that another day and see what they do (and how much noise they produce...). Oh, and btw, if u havent got the original hdd screws for that cage: GO GET EM. They definately make a difference in noise . This is an pretty actual shot of the rear featuring the cut for the side lock, the psu rear in the original tray fanhole and a new cut out hole for the psu rear exhaust (or maybe a 2nd future fan, in case i am planning to fit the psu in the top departement of the case). And, damn, i need to get a real camera Todo list for the very next task: Building a new cage in front departement of the case outta 4 aluminium corners going from the bottom to the upper departement. Will have ca. 5.25" size and holding: a) a slim and long radiator and fans in front of it denoised hdd's c) water pump at the bottom Well, never thought that i would've been able to get this case up and running in 2-3 days, but i did. And yes, a Dremel is an excellent tool greetz, gitano Link to comment Share on other sites More sharing options...
n1c3jack3t Posted November 19, 2009 Share Posted November 19, 2009 I sent out a few PMs to people who had previously made some sort of solution to connect the front panel to the mobo. I'm a complete n00b with wiring and pins/pinouts so in looking to pay someone for their services to mock up a cable that connects to the 2x9 g5 plug and has some headers to plug into my mobo for the power button/led/USB/FireWire to function correctly. Please pm me or let me know if you're interested. My board is a GA-G31M-ES2L. Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts